77 43 123 Installing topcase + 77 43 556 Core activity BMW

BMW-Motorrad - 0430 - R 1200 RT, K26 11
+
77 43 123 Installing topcase
77 43 556
Equipment trim-level variant:
OA
Topcase
Core activity
(-) Install the topcase lock barrel in lock
Note
Never attempt to remove the key from the lock barrel after it has been
removed, because the tumblers would pop out of position.
Lubricate the lock barrel.
Lubricant
Grease for lock cylinders
81 22 9 407 421
Insert latch (1) of the barrel into the lock with the key in the
"RELEASE" position and turn the key until the lock barrel engages
with an audible click.
(-) Opening topcase
Turn the key to the "OPEN" position (1).
Press the key or lock barrel (2) until locking lever (3) pops out.
Pull locking lever (3) up until lid (4) is unlatched.
Open the lid.
(-) Close the topcase
Locking lever (3) must be in the fully open position, in other words all
the way up.
Close topcase lid (4).
Push locking lever (3) down until it engages.
Turn the key to the "LOCK" position (5).
The case is closed and locked.
122013
BMW Motorrad, UX-VA-4
1/3
BMW-Motorrad - 0430 - R 1200 RT, K26 11
(-) Install the topcase
Close the topcase
Locking lever (3) must be in the fully open position, in other words all
the way up.
Close topcase lid (4).
Push locking lever (3) down until it engages.
Turn the key to the "LOCK" position (5).
The case is closed and locked.
Turn the key to the "RELEASE" position (1); carry handle (2) pops
out.
Red markers (3) come into view.
Pull carry handle (2) all the way up: this action causes securing hooks
(4) to retract.
Lower topcase (5) into position on luggage carrier (6).
Make sure that hooks (7) engage underneath rails (8) of the luggage
carrier.
Pivot topcase (5) down so that rubber buffers (9) rest on luggage
carrier (6).
Push carry handle (2) on topcase (5) down.
Warning
An inadequately secured topcase can impair road safety.
After installing the topcase, always turn the key to the "LOCK" position.
Securing hooks (4) must extend and engage.
122013
BMW Motorrad, UX-VA-4
2/3
BMW-Motorrad - 0430 - R 1200 RT, K26 11
Note
When the case is installed and correctly secured, the red marker on the
handle is no longer visible.
Do not exceed the maximum permissible payload and the maximum
speed limit.
Technical data
Payload of topcase
See label in the
topcase
Maximum
permissible speed
for riding with
topcase fitted to the
motorcycle
See label in the
topcase
(-) Removing topcase
Turn the key to the "RELEASE" position (1); carry handle (2) pops
out.
Red markers (3) come into view.
Pull carry handle (2) all the way up: this action causes securing hooks
(4) to retract.
Take a firm grip of the handle and lift topcase (5) up and to the rear
until it is clear of the luggage carrier.
Finishing work
Final check of work performed
122013
BMW Motorrad, UX-VA-4
3/3