Ergonomic excellence Pulsed perfection
Transcription
Ergonomic excellence Pulsed perfection
POWER WAVE 345 & LINC FEED 40 ADVANTAGE ✓ The POWER WAVE 345 has superb arc welding characteristics in Pulse, Pulse on Pulse™, CV, Stick and TIG DC to support most welding applications ✓ Full featured: Equipped with the LINC FEED 40 wire feeder; Hot/Soft start, Synergic control, Craterfill and Memory are supported ✓ Excellent feeding; four roll drive as standard supporting smooth wire feeding from the spool to the contact tip ✓ Unique “fliptop” design prevents 2 YEARS ❷ WARRANTY S Ergonomic excellence Pulsed perfection and protects the wire drive mechanism from interference and houses the basic program selection and feature controls ✓ Pulse on Pulse™ mode produces a very stable arc for thin plate aluminium welding ✓ Excellent arc starting reduces spatter and post weld cleaning ✓ Hot/Soft start procedure to The POWER WAVE 345 with LF40 wire feeder is an Industrial Pulse welding package, part of the new Lincoln concept. These new products were developed with the welder in mind, therefor all the welding controls are located at the wire feeder, making the welding parameters easy to adjust. The Powerwave 345 is supplied with a set of synergic welding programs to support Steel, Stainless and Aluminium applications. Conventional CV MIG, Stick welding, Pulse welding and Lift TIG are also included. The Hot/Soft facility allows welding with a higher or lower current before the required welding parameters are established. The Hot start is most beneficial for aluminium applications. When welding cold Aluminium material, the higher energy levels at the start provide better wetting and a flatter weld. The arc is established at the welding level once the material has been pre-heated. To further support Aluminium welding, the Pulse on Pulse (Double Pulse) programs provide a very stable arc at low amperes. Included in the package is the LF40. designed to combine easy handling and control by the welder with perfect wire feeding. All LINC FEED feeders are equipped with the same rugged four-roll drive system. This drive is easy to access and protected by the unique fliptop cover. A rugged undercarriage also allows the wirefeeder to be used at a distance from the power source. The power source itself is equipped with a storage compartment for tools and accessories. support Hot start for Aluminium applications or to be used at welder’s discretion ✓ Eight Memory locations are available to store specific welding programs ✓ Digital meters allow for presetting and readout of the actual parameters during welding ✓ Water flow sensing on the water-cooled models ✓ Designed the Lincoln way; rugged and reliable ✓ Two year warranty TECHNICAL SPECIFICATIONS Product Name Item Number Input Voltage Protection Insulation Class Class Rated output Weight KG Dimensions LxHxW (mm) Auxiliary power Compliance PW 345 Air-cooled K10356-1A 230/400V 3Ph IP23 H 350A 35% 131 870 x 680 x 1060 230V / 3.5A EN 60974-1 PW 345 Water-cooled K10356-1W 230/400V 3Ph IP23 H 350A 35% 148 870 x 680 x 1060 230V / 3.5A EN 60974-1 ACCESSORIES Product Name Item Number Input Voltage Weight KG Dimensions Wire L x H x W (mm) Diameter WFS M/Min Item Number Description LINC FEED 40 Air K10353-2 K10343 K10367 K10339-1 Remote Control + 5M cable Innershield gun adapter Pull bar for undercarriage Undercarriage LINC FEED K10340-40-4-A 40 DC 18 753x470x295 0.8-1.6 mm 2-20 LINC FEED 40 Water* K10340-40-4-W 40 DC 18 753x470x295 0.8-1.6 mm 2-20 Drive rolls 1.0 - 1.2 mm are included. *Push Pull version available (K10340-40-5-W) Pulse on Pulse™ capability ADVANTAGE ✓ Higher arc stability at lower current levels ✓ Better wetting of the weld pool Oscillation frequency High Low ✓ Higher cleaning levels ✓ Reduced risk of burn through ✓ Better control on thin material ✓ An improvement of the process tolerance Energy ✓ Improved ripple formation Time Pulse frequency Pulse on Pulse TM Process The Pulse on Pulse TM process has been designed to provide the welder with an alternative to conventional Pulse MIG welding of Aluminum or Stainless Steel but with the quality of TIG. By simply super-imposing an additional pulse onto the base pulse, you control the ripple and formation of the finished weld. Great Britain: Lincoln Electric (UK) Ltd. Tel: +44 114 287 2401 Fax: +44 114 287 2582 Belgium: Lincoln Smitweld Belgium Tel: +32 2 377 00 71 Fax: +32 2 378 18 77 France: Lincoln Electric France SA Tel: +33 232 11 40 40 Fax: +33 232 11 40 11 Germany: Lincoln Smitweld G.m.b.H Tel: +49 201 896 280 Fax: +49 201 896 2831 Linc Feed 40 Unique, easy to access, protective, flip top cover Feature selection Italy: Lincoln Electric Italia, SRL Tel: +39 010 837 911 Fax: +39 010 837 9150 The Netherlands: Lincoln Smitweld B.V. Tel: +31 24 352 29 11 Fax: +31 24 352 22 00 Denmark: Lincoln Electric Nordic Tel: +45 86 26 51 00 Fax: +45 86 26 51 50 Norway: Lincoln Electric Norge AS Tel: +47 23 377 400 Fax: +47 22 720 580 Program selection Wire/gas Inch Spain: Lincoln KD, Sa Tel: +34 93 685 9600 Fax: +34 93 685 9610 Sweden: Lincoln Electric Sverige AB Tel: +46 322 781 30 Fax: +46 322 671 830 Turkey: A.S. Kaynak Tel: +90 216 377 30 90 Fax: +90 216 377 00 00 2/4 Stroke Poland: Bester S.A. Tel: +48 746 46 1100 Fax: +48 746 46 1082 E0013.01/03 Your Lincoln Electric Dealer: LINCOLN ELECTRIC EUROPE