Vorlage für Service Informationen_1

Service Information
Tachographs,Telematics & Services
www.vdo.com
Internal use only! Subject to technical amendments
To:
Technical Managers / Service Technicians
Domesti
c
Abroad
Product/System:
x
x
Date:
16.01.2013
From:
Mr. Jauch
Appraisal of RSO / ND
Dept.:
I CVAM TTS FS PFS
RSO
Tel.:
+49 7721 67-2175
Fax:
+ 49 7721 67-79 2175
E-mail:
[email protected]
RSO / ND
RS / EWR
IS/EW, ISE/EWEI
®
DTCO 1381
Allocation:
SI No.:
116 270
Page:
1 of 6
Internet:
http://www.dtco.vdo.de
FAQ:
http://www.dtco-user.com/faq/
Parameterisation procedure for universal devices:
(new ZIP file)
What's new? (complements SI 116 249)
-
Correction of specific parameter files (dimming properties)
Name adaptations
Expansion of zip file to include switching on remote key operation
(required for using the DTCO® SmartLink)
The attached zip file also contains all the currently known rel. 1.4 parameter sets.
The recently introduced rel. 1.4b "DAF universal device" is also included.
This means that nothing has changed for the workshop.
The following features have been added to the zip file as a result of the required IMS switchover in the field and
the reduced number of versions provided by OE manufacturers:
Target device: DTCO 2.0® 1381.0111009001 (FIAT DUCATO, OEM version, model 2012-)
DUCATO
1381.0111009001 (11-bit CAN bus / phase-out model 2006-2011)
DUCATO_NEW
1381.0111009001 (29-bit CAN bus / new model 2012-)
Target device: DTCO 2.0® 1381. 0250309003 (FORD TRANSIT, OEM version for new model 2013)
FORD TRANSIT IMS
1381.0250309003 (Master IMS / new model in starting phase)
FORD RANGER IMS
1381.0250309003 (special IMS message from FORD SUVs)
Load the attached ZIP file into your CTCII. You can then operate all the known 1.4 UNIVERSAL devices 1.4 and
the current 2.0a UNIVERSAL devices as usual.
Continental Automotive GmbH
Heinrich-Hertz-Straße 45
D-78052 Villingen-Schwenningen
VDO – A Trademark of the Continental Corporation
SI No.
Page
116 270
2
Current programming procedure for "branding" a universal device using DAF as an
example:
SI No.
Page
116 270
3
In almost 70% of all DTCOs in the field (Rel. 1.3a/1.3u, 1.4/1.4s/1.4b and 2.0/2.0a) the 8 DTCO buttons have
been programmed at the factory in such a way that they can be controlled remotely using diagnostic
commands.
Some manufacturers, however, have blocked this function for field use, e.g. it is not available in all HGVs and
buses of the Daimler Group with the exception of the Sprinter and Vito vans.
The DTCO 2.0 types 1381.1070109002 or 1381.1070109003 are given as examples here.
You should therefore use the CTCII (Rev. 2.08 or 2.10) to make this function available.
For this, the DTCO must be in "calibration mode".
We will use the known functions of the "Universal device parameterisation procedure".
Programming steps for switching on "remote control" in EvoBus vehicles:
SI No.
Page
116 270
4
List of currently available 2.0a universal devices
1381/2210309001T (24V, ADR zone 2)
Features a second, open CAN, D1/D2, A4/A8 with fixed 120 Ohm resistor, v/n profile, white display, 4
dimming presets based on CAN, terminal 15, terminal 58 day/night or terminal 58D
IMS ON, VDO Counter enabled on display and for diagnostics.
1381/2210309002T (24V, ADR zone 2)
Features a second, open CAN, D1/D2, A4/A8 without 120 Ohm resistor, v/n profile, white display, 4 dimming
presets based on CAN, terminal 15, terminal 58 day/night or terminal 58D
IMS ON, VDO Counter enabled on display and for diagnostics.
1381/0210209001T (12V)
Features a second, open CAN, D1/D2, A4/A8 with fixed 120 Ohm resistor, v/n profile, white display, 4
dimming presets based on CAN, terminal 15, terminal 58 day/night or terminal 58D
IMS ON, VDO Counter enabled on display and for diagnostics.
1381/0210209002T (12V)
Features a second, open CAN, D1/D2, A4/A8 without 120 Ohm resistor, v/n profile, white display, 4 dimming
presets based on CAN, terminal 15, terminal 58 day/night or terminal 58D
IMS ON, VDO Counter enabled on display and for diagnostics.
1381/4210309001T (24V, ADR zone 1)
Features a second, open CAN, D1/D2, A4/A8 with fixed 120 Ohm resistor, v/n profile, white display, 4
dimming presets based on CAN, terminal 15, terminal 58 day/night or terminal 58D
IMS ON, VDO Counter enabled on display and for diagnostics.
1381/4210309002T (24V, ADR zone 1)
Features a second, open CAN, D1/D2, A4/A8 without 120 Ohm resistor, v/n profile, white display, 4 dimming
presets based on CAN, terminal 15, terminal 58 day/night or terminal 58D
IMS ON, VDO Counter enabled on display and for diagnostics.
SI No.
Page
116 270
5
Which OEM DTCO 1381 2.0 customer devices can today be emulated by
setting suitable parameters for a universal DTCO 1381 2.0a?
Universal DTCO 2.0a 1381.2210309001 (with resistor), emulated (High runner with 24V vehicles):
ALEXANDER DENNIS
1381.1051009003 (bus manufacturer from the UK)
DAF
1381.2051109002 (XF/CF/LF series)
DENNIS-EAGLE
1381.1010109003 (HGV manufacturer from the UK)
EVOBUS
1381.1070109003 (SETRA and Mercedes buses)
HINO
1381.1060109001 (small HGVs)
IVECO
1381.1072109002 (Stralis, Eurocargo Trakker)
MAN
1381.2051009001 (TGX, TGM, TGL)
MERCEDES
1381.2070009002 (ACTROS, AXOR, ATEGO, UNIMOG)
RENAULT MAGNUM EURO3 1381.2052300026 (Magnum, Kerax, Premium, Midlum EURO3)
SCANIA
1381.1071409001 (P, G, R series)
SOR
1381.1070009001 (Polish bus manufacturer)
TEMSA
1381.1071009002 (Turkish bus manufacturer)
VAN_HOOL
1381.1070009002 (Belgian bus manufacturer)
VDL_BUS
1381.1070109004 (Dutch bus manufacturer)
VDO_UNIVERSAL
1381.2210309001 (reset to factory settings)
VOLVO
1381.2012009002 (FM/FH series)
Universal DTCO 2.0a 1381.2210309002 (w/o resistor), emulated:
ISUZU
1381.1050209001 (NQR, NPR)
MERCEDES_NEW_GEN
1381.2010009002 (ACTROS NEW, ANTOS)
MITSUBISHI
1381.1070109005 (Canter)
NISSAN
1381.1101009001 (Atleon from mid 2006))
RENAULT MAGNUM
1381.2052309003 (Magnum, Kerax, Premium, Midlum)
RENAULT MAGNUM EURO3 1381.2052300026 (Magnum, Kerax, Premium, Midlum EURO3)
SOLARIS
1381.1070209001 (Polish bus manufacturer)
VDO_UNIVERSAL
1381.2210309002 (reset to factory settings)
VOLVO_FL
1381.2012309003 (FE/FL series, mid 2006)
Universal DTCO 2.0a 1381.4210309001 (with resistor), emulated: (ADR Z1)
DAF_ADRZ1
1381.2051109002
IVECO_ADRZ1
1381.4072109001
SCANIA_ADRZ1
1381.1071409001
VDO_UNIVERSAL
1381.4210309001 (reset to factory settings)
VOLVO_ADRZ1
1381.2012009002
Universal DTCO 2.0a 1381.4210309002 (w/o resistor), emulated: (ADR Z1)
RENAULT_ADRZ1
1381.2052309003
VDO_UNIVERSAL
1381.4210309002 (reset to factory settings)
VOLVO_ADRZ1
1381.2012309003
SI No.
Page
116 270
6
Universal DTCO 2.0a 1381.0210209002 (w/o resistor), emulated (High runner with 12V vehicles):
FENDT_VARIO
1381.0010209001 (tractors)
FIAT_DUCATO
1381.0111009001 (Ducato phase-out model)
FIAT_DUCATO_NEW
1381.0111009001 (new Ducato model 2012)
FORD_RANGER
1381.0250309003 (SUV)
FORD_TRANSIT
1381.0070309004 (Transit phase-out model, day/night dimming)
FORD_TRANSIT_NEW_GEN 1381.0250309003 (Transit, new model 2013)
FORD_TRANSIT_RHEOSTAT 1381.0070309003 (Transit phase-out model, dimming via rheostat)
IVECO_DAILY_2006
1381.0111109003 (Daily phase-out model)
IVECO_DAILY_2012
1381.0111109002 (Daily, new model 2012)
MERCEDES SPRINTER
1381.0010009002 (Sprinter, general)
MITSUBISHI
1381.0070109002 (Canter)
NISSAN CABSTAR
1381.0101009002 (Atlas, Cabstar, Maxity)
RENAULT_NISSAN_OPEL
1381.0111409004 (Trafic, Vivaro, Primastar)
VDO_UNIVERSAL
1381.0210209002 (reset to factory settings)
VW_CRAFTER
1381.0120009002 (Crafter only, not T5 .)
Universal DTCO 2.0a 1381.0210209001 (with resistor), emulated:
VDO_UNIVERSAL
1381.0210209001 (reset to factory settings)
Device type 1381.1210009001T is available for training courses and training
(training device with test key) - the parameter set below can be used:
Training device 1381.1210009001 (for demo and training case)
(IMS on CAN2 and parameters based on TCO1 message).
IMS can be provided by a second DTCO (no specific release).
For this, connect CAN1 A4/A8 to CAN2 C5/C7 on the training device.)
ALEXANDER DENNIS
DAF
DENNIS-EAGLE
EVOBUS
HINO
IVECO
MAN
MERCEDES
SCANIA
SOR
TEMSA
VAN_HOOL
VDL_BUS
VDO_UNIVERSAL
VOLVO
1381.1051009003
1381.2051109002
1381.1010109003
1381.1070109003
1381.1060109001
1381.1072109002
1381.2051009001
1381.2070009002
1381.1071409001
1381.1070009001
1381.1071009002
1381.1070009002
1381.1070109004
1381.2210309001 (reset to factory settings)
1381.2012009002