Multimode (Gradientenindexfaser) Multimode (gradient index fibre)
Transcription
Multimode (Gradientenindexfaser) Multimode (gradient index fibre)
TECHNIK LWL Spezifikationen / Fiber Optic specifications Multimode (Gradientenindexfaser) Multimode (gradient index fibre) Anwendung Application Dieser Fasertyp findet aufgrund seiner hohen Übertragungsbandbreite und geringen Dämpfung überall dort Anwendung, wo grobe Informationsmengen über weite Entfernungen in digitaler oder analoger Form übertragen werden. Diese Gradientenfasern bestehen aus einem unterschiedlich dotierten Quarzglaskern, umgeben von einem Quarzglasmantel. Unterschiedliche Dämpfungs- und Bandbreitenkategorien erlauben einen wirtschaftlichen Einsatz in verschiedenen Wellenlängenbereichen. Large transmission bandwiths and low attenuation rates allow the fibre to be used wherever large volumes of data are to be transmitted across long distances in digital or analog form. The graded-index fibre consists of a silica core of specified doping levels, surrounded by silica cladding. A choice of attenuation and bandwith categories allow its efficient use in different wavelenght ranges. Aufbau Construction Technische Daten Technical Data G62,5 OM1 G50 OM2 G50 OM3 G50 OM4 dB/km dB/km 2,6 / 3,2 0,5 / 1,0 2,3 / 3,0 0,6 / 1,0 2,0 / 3,0 0,5 / 1,0 2,0 / 3,0 0,5 / 1,0 Bandbreite (OFL) / bandwidth (OFL) (1) @ 850 nm @ 1300 nm MHz * km MHz * km ≥ 220 ≥ 600 ≥ 600 ≥ 1200 ≥ 1500 ≥ 500 ≥ 3500 ≥ 500 Bandbreite (EMB) / bandwidth (EMB) (2) @ 850 nm @ 1300 nm MHz * km MHz * km - - ≥ 2000 ≥ 500 ≥ 4700 ≥ 500 m m ≤ 300 ≤ 550 ≤ 750 ≤ 2000 - - Dämpfung / Attenuation @ 850 nm (typ. / max.) @ 1300 nm (typ. / max.) Übertragungslänge @ 1GBit/s / transmission length @ 1 Gbps @ 850 nm @ 1300 nm Übertragungslänge @ 10GBit/s / transmission length @ 10 Gbps @ 850 nm m - - ≤ 300 550 Numerische Apertur / numerical aperture µm 0,275 ±0,015 0,20 ±0,015 0,20 ±0,015 0,20 ±0,015 Kerndurchmesser / core diameter µm 62,5 ±2,5 50 ±2,5 50 ±2,5 50 ±2,5 Manteldurchmesser / cladding diameter µm ≤ 1,5 ≤ 1,5 1295-1340 1295-1340 125 ±1,0 Mantel Unrundheit / clad non-circularity ≤ 1% Durchmesser Primärbeschichtung / primary coating diameter 245 ±10 Primärb. Unrundheit / coating non-circularity % Kern/Mantel Exzentrizität / core/clad concentricity µm Primärb./Mantel Exzentrizität / coating/clad concentricity µm Nulldispersionswellenlänge (ג0) / zero disp. wavelength nm Brechungsindex / refractive index @ 850 nm @ 1300 nm ≤5 ≤ 1,0 ≤ 1,5 1320-1365 1295-1340 ≤8 1.483 1.479 (1) OFL: „overfilled launch“ (LED), (2) EMB „effective modal bandwidth“ (Laser) V.16 V1.0 Technische Änderungen und Druckfehler vorbehalten. We reserve the right to make technical alterations without prior notice and misprint. Unser KNOW-HOW und SERVICE ist Ihre Stärke ... Our KNOW-HOW and SERVICE is your strength ... 276 TECHNIK LWL Spezifikationen / Fiber Optic specifications Singlemode (Stufenindexfaser) Monomode (step index fibre) Anwendung Application Singlemodefasern finden hauptsächlich in Weitverkehrssystemen mit großen Informationsmengen und Regeneratorabständen Anwendung. Diese Fasertype ist weltweit in privaten und öffentlichen Telekommunikationsnetzen im Einsatz. Diese Fasern bestehen aus einem hochreinen Quarzglaskern umgeben von einem Quarzglasmantel. Die Faser wird von einer UV-gehärteten Acrylat-Schicht geschützt. Diese Fasern erlauben, zufolge ihrer niedrigen Dämpfungs- und Dispersionswerte, den Einsatz auch in Weitverkehrssysteme. Single-mode fibres are primarily used for long-distance systems where volumes of data are transmitted across wide distances between regenerators. The fibre is used in numerous private and public telecommunication networks all over the world. The fibre consists of a highly pure silica core, surrounded by silica cladding. The fibre is protected by a layer of Uv-hardened acrylate-owing to their low attenuation and dispersion values, the ,,matched cladding“-type fibre may also be used in longterm solutions that offer a secure basis for future developments. Aufbau Construction Technische Daten Technical Data Dämpfung /attenuation @ 1310 nm (typ. / max.) @ 1550 nm (typ. / max.) @ 1625 nm (typ. / max.) Chromatische Dispersion / chromatic dispersion @ 1285-1330 nm @ 1550 nm @ 1530-1565 nm @ 1565-1625 nm @ 1460-1625 nm dB/km dB/km dB/km ps --------nm.km Nulldispersionswellenlänge (ג0) / zero disp. wavelength nm Grenzwellenlänge (גcc) / cut-off wavelength nm Faser PMD / fibre PMD individual fiber ps ----√km Durchmesser des Modenfeldes / mode-field diameter @ 1310 nm @ 1550 nm µm Manteldurchmesser / cladding diameter µm ITU-T G.652D ITU-T G.657.A1 TU-T G.657.A2 TU-T G.657.B3 TU-T G.655.C/D TU-T G.655.C/E G.656 0,31 / 0,35 0,20 / 0,24 0,21 / 0,26 0,31 / 0,35 0,20 / 0,24 0,21 / 0,26 0,31 / 0,35 0,20 / 0,24 0,21 / 0,26 0,31 / 0,35 0,20 / 0,24 0,21 / 0,26 0,25 / 0,30 0,27 / 0,34 0,25 / 0,30 0,27 / 0,34 ≤ 3,5 ≤ 18 - - - - 2,6 - 6,0 4,0 - 8,9 -1,0 - 8,9 5,5 - 8,9 6,9 - 11,4 2,0 - 11,4 1302-1322 1302-1322 1302-1322 1302-1324 - ≤ 1405 - - ≤ 1260 0,1 9,2 ± 0,4 10,4 ± 0,5 8,6 - 9,3 9,5 - 10,5 µm Primärb./Mantel Exzentrizität / coating/clad concentricity Kern/Mantel Exzentrizität / core/clad concentricity 8,8 ± 0,4 - Brechungsindex / refractive index @ 1310 nm @ 1550 nm 8,4 ± 0,6 8,6 ± 0,4 ≤ 1% ≤ 1µm ≤ 0,7% 235 - 245 245 ± 10 245 ± 5 ≤ 12 µm µm 6,3 - 9,5 9,2 - 10.4 0,1 125 ± 0,7 Mantel Unrundheit / clad non-circularity Durchmesser Primärbeschichtung / coating diameter 0,2 ≤ 5% ≤ 0,5 - 1.467 1.468 - ≤ 10 µm ≤ 0,5 1.468 1.471 1.470 TECHNIK V.16 V1.0 Technische Änderungen und Druckfehler vorbehalten. We reserve the right to make technical alterations without prior notice and misprint. Unser KNOW-HOW und SERVICE ist Ihre Stärke ... Our KNOW-HOW and SERVICE is your strength ... 277