Kraft 2.0 Merand
Transcription
Kraft 2.0 Merand
HORIZONTAL MOULDER KRAFT 2.0 model USE Machine to laminate and mould dough balls. Weight from 50 to 1000 grs (*) Maximum length of the moulded dough balls : 600mm (*) Production rate : up to 2000 pieces per hour depending on the dough ball weight (*). (*) : Information is given as an indication only and can vary depending on the nature of the dough. FEATURES Secured charging hopper with adjustable section : Allows to adjust perfectly where the dough balls will fall : in the middle of the laminating rolls. 4 laminating rolls : Allows a progressive lamination without stress of the dough. Allows to laminate all types of doughs including hard doughs. First laminating rolls are ribbed : Ensures the dough goes in correctly at the entrance of the moulder. Independant setting of the laminating rolls an of the stretching plate : Extremeley precise & reliable settings to adapt to all needs and ensures the recipes can be repeated over and over again with the same precision : The gap of the pairs of rolls can be adjusted The height of the elongating plate can be adjusted The pinch strenght of the elongating plate can be adjusted. Elongating plate and calibrating guides : The under side has 2 double V’s to help the flow of the dough and therefore facilitate the elongation in a cylinder shape. The guides allow the calibrated moulding of the straight ends in order to put in moulds for exemple. Laminating hopper side panels are see through : Eye control when the dough ball comes in Eye control of the lamination Reception shelf topping is made of Teflon : Stops the breads sticking when coming out. Prevents from deformation when manual work afterwards. Document non contractuel, nous nous réservons le droit de modifier tous ces produits sans préavis SMEC161A du 20/09/2013 PRESENTATION 1. Laminating rolls 2. Laminating set 3. Feeding hopper 4. Elongating plate 5. Calibrating guides 6. Reception shelf 7. On/off switch USEFUL DIMENSIONS PACKING LIST Net weight : 350 Kgs Dimensions (Width x Depth x Height) : 96 cm x 225 cm x 167 cm. HYGIENE — SAFETY The KRAFT 2.0 moulder conforms : Machine directive 2006/42/CE Work code ELECTRICAL FEATURES 380 Volts / 50 Hz / 1,5Kw Document non contractuel, nous nous réservons le droit de modifier tous ces produits sans préavis SMEC161A du 20/09/2013