Kantenschutzprofile Edge Protectors
Transcription
Kantenschutzprofile Edge Protectors
SAND Profile GmbH Dr.- Patt- Str. 9- 11 D- 63811 Stockstadt Tel.: +49 (0) 60 27/ 41 60 0 Fax: +49 (0) 60 27/ 41 60 69 E-Mail: [email protected] Web: www. sandprofile. com Kantenschutzprofile Kantenschutzprofile vereinfachen die Verkleidung von Kanten, ersparen Vor- und Nacharbeiten bzw. entschärfen Blechkanten. Ferner wird eine Zierwirkung erreicht. Die Profile sind mit einem eingebetteten Stahlklemmband oder Drahtkörper ausgestattet. Dies bewirkt einen festen Sitz auf Blechkanten, auch wenn Radien oder Krümmungen vorhanden sind. Kantenschutzprofile werden von Hand oder mit einem Gummi- bzw. Kunststoffhammer aufgebracht. Die Verwendung von Klebstoffen oder besonderen Befestigungen ist nicht erforderlich. Der Klemmbereich ist jeweils variabel einstellbar. Alle abgebildeten Profile können sowohl in Fixlängen wie in konfektionierten Rahmen und Ringen geliefert werden. Andere Farben und Qualitäten wie zum Beispiel lebensmittelechte, schwer entflammbare und selbstverlöschende Qualitäten auf Anfrage. Die Standardfarbe ist schwarz. Auf Anfrage sind alle gängigen Farben möglich. Die Spezifikationen der verwendeten Materialien entsprechen den automobilen Regelwerken. Die dazugehörigen Materialdatenblätter senden wir Ihnen gerne zu. Edge Protectors Edge protectors simplify the revetting of metal edges, they save preparatory or reconditioning work. Furthermore, their decorative effect is often desired. The profiles are equipped with an embedded steel base strip or wire carrier. These enable a tight fit on the edge, even in the presence of radii or bends. Edge protectors are mounted manually or with a rubber or thermoplastic hammer. The use of adhesives or other fastening accessories is not necessary. The clamping range can be adjusted individually within the given range. All profiles shown are available as custom lengths or as frames and rings. Other colours and qualities such as food safe, flame resistant or self-extinguishing qualities are available upon request. The standard colour is black. All common colours are available upon request. The materials comply with the common standards of the automobile industry. We will be pleased to provide you with the corresponding material data sheets. Issue / Stand 03/05 D1 SAND Profile GmbH Dr.- Patt- Str. 9- 11 D- 63811 Stockstadt Tel.: +49 (0) 60 27/ 41 60 0 Fax: +49 (0) 60 27/ 41 60 69 E-Mail: [email protected] Web: www. sandprofile. com Notes: Bemerkungen: 1. SAND Profile reserves the right to modify this drawing without prior notification. SAND Profile behält sich das Recht vor, diese Zeichnung ohne vorherige Ankündigung zu ändern. 2. Unless stamped and signed this is an uncontrolled copy and will not be updated. You are responsible for ensuring you have the latest issue. Ohne Stempel und Unterschrift ist diese Zeichnung eine nicht kontrollierte Kopie und wird nicht aktualisiert. Die Verantwortung für die Aktualisierung nach dem neuesten Stand liegt bei Ihnen. 3. Minimum radius on corners to suit tooling and material. Die Eckenradien sind Minimalwerte, die dem Werkzeug und dem Material anzupassen sind. 4. Length: As required. Tolerance to be agreed with customer. Länge: Wie erforderlich. Toleranz: In Abstimmung mit dem Kunden. 5. Copyright: Without prior consent of SAND Profile GmbH this technical document must not be copied, duplicated or transmitted in any manner to a third party. This document and the information contained therein are confidential and property of SAND Profile GmbH (protection according to DIN ISO 16016 claimed). Copyright: Ohne vorherige Genehmigung der Fa. Sand Profile GmbH darf diese technische Unterlage weder kopiert, vervielfältigt noch auf irgendeine Weise Dritten zugänglich gemacht werden. Dieses Dokument und die darin enthaltene Information sind vertraulich und EIgentum der Fa. SAND Profile GmbH (Schutz nach DIN ISO 16016 beansprucht). wire carrier Drahtband Soft PVC PVC-Weich 2,5 1,5 30,6 -0 +2 0-1 13,6,6 9,4 M 1:1 Material / Werkstoff: Color / Farbe: Hardness / Härte: Polyvinylchloride (PVC) black / schwarz 78±5 ShoreA 2005 drawn by gez. von checked by gepr.von Date / Datum 28.01. Name / Name 28.01. Sinke Scale / Maßstab 2:1, 1:1 Tolerance / Freimaßtoleranz: DIN 16941 3b Description / Benennung F. Schollen Edge Protection Profile Kantenschutzprofil Drawing no. / Zeichnungs-Nr. No Nr. Index Index Modification Änderung Issue / Stand 03-05 Date Datum Name Name A3281-SP Sheet Blatt SAND Profile GmbH - D-63811 Stockstadt - Dr.-Patt-Straße 9-11 D2 SAND Profile GmbH Dr.- Patt- Str. 9- 11 D- 63811 Stockstadt Tel.: +49 (0) 60 27/ 41 60 0 Fax: +49 (0) 60 27/ 41 60 69 E-Mail: [email protected] Web: www. sandprofile. com Notes: Bemerkungen: 1. SAND Profile reserves the right to modify this drawing without prior notification. SAND Profile behält sich das Recht vor, diese Zeichnung ohne vorherige Ankündigung zu ändern. 2. Unless stamped and signed this is an uncontrolled copy and will not be updated. You are responsible for ensuring you have the latest issue. Ohne Stempel und Unterschrift ist diese Zeichnung eine nicht kontrollierte Kopie und wird nicht aktualisiert. Die Verantwortung für die Aktualisierung nach dem neuesten Stand liegt bei Ihnen. 3. Minimum radius on corners to suit tooling and material. Die Eckenradien sind Minimalwerte, die dem Werkzeug und dem Material anzupassen sind. 4. Length: As required. Tolerance to be agreed with customer. Länge: Wie erforderlich. Toleranz: In Abstimmung mit dem Kunden. 5. Copyright: Without prior consent of SAND Profile GmbH this technical document must not be copied, duplicated or transmitted in any manner to a third party. This document and the information contained therein are confidential and property of SAND Profile GmbH (protection according to DIN ISO 16016 claimed). Copyright: Ohne vorherige Genehmigung der Fa. Sand Profile GmbH darf diese technische Unterlage weder kopiert, vervielfältigt noch auf irgendeine Weise Dritten zugänglich gemacht werden. Dieses Dokument und die darin enthaltene Information sind vertraulich und EIgentum der Fa. SAND Profile GmbH (Schutz nach DIN ISO 16016 beansprucht). 6 9 steel carrier Stahlband Soft PVC PVC-Weich M 1:1 (1.5) 1.7 Material / Werkstoff: Color / Farbe: Hardness / Härte: Polyvinylchloride (PVC) black / schwarz 78±5 ShoreA 2005 drawn by gez. von checked by gepr.von Date / Datum 28.01. Name / Name 28.01. Sinke Scale / Maßstab Tolerance / Freimaßtoleranz: 10:1, 1:1 DIN 16941 3b Description / Benennung F. Schollen Edge Protection Profile Kantenschutzprofil Drawing no. / Zeichnungs-Nr. No Nr. Index Index Modification Änderung Issue / Stand 03-05 Date Datum Name Name A3298-SP Sheet Blatt SAND Profile GmbH - D-63811 Stockstadt - Dr.-Patt-Straße 9-11 D3 SAND Profile GmbH Dr.- Patt- Str. 9- 11 D- 63811 Stockstadt Tel.: +49 (0) 60 27/ 41 60 0 Fax: +49 (0) 60 27/ 41 60 69 E-Mail: [email protected] Web: www. sandprofile. com Notes: Bemerkungen: 1. SAND Profile reserves the right to modify this drawing without prior notification. SAND Profile behält sich das Recht vor, diese Zeichnung ohne vorherige Ankündigung zu ändern. 2. Unless stamped and signed this is an uncontrolled copy and will not be updated. You are responsible for ensuring you have the latest issue. Ohne Stempel und Unterschrift ist diese Zeichnung eine nicht kontrollierte Kopie und wird nicht aktualisiert. Die Verantwortung für die Aktualisierung nach dem neuesten Stand liegt bei Ihnen. 3. Minimum radius on corners to suit tooling and material. Die Eckenradien sind Minimalwerte, die dem Werkzeug und dem Material anzupassen sind. 4. Length: As required. Tolerance to be agreed with customer. Länge: Wie erforderlich. Toleranz: In Abstimmung mit dem Kunden. 5. Copyright: Without prior consent of SAND Profile GmbH this technical document must not be copied, duplicated or transmitted in any manner to a third party. This document and the information contained therein are confidential and property of SAND Profile GmbH (protection according to DIN ISO 16016 claimed). Copyright: Ohne vorherige Genehmigung der Fa. Sand Profile GmbH darf diese technische Unterlage weder kopiert, vervielfältigt noch auf irgendeine Weise Dritten zugänglich gemacht werden. Dieses Dokument und die darin enthaltene Information sind vertraulich und EIgentum der Fa. SAND Profile GmbH (Schutz nach DIN ISO 16016 beansprucht). 7,5±0,5 19-0/+1.4 13±0,5 Soft PVC PVC-Weich wire carrier Drahtband 3,2±0,3 7,2 M 1:1 Material / Werkstoff: Color / Farbe: Hardness / Härte: Polyvinylchloride (PVC) black / schwarz 78±5 ShoreA 2005 drawn by gez. von checked by gepr.von Date / Datum 28.01. Name / Name 28.01. Sinke Scale / Maßstab 5:1, 1:1 Tolerance / Freimaßtoleranz: DIN 16941 3b Description / Benennung F. Schollen Sealing Profile KSD-Profil Drawing no. / Zeichnungs-Nr. No Nr. Index Index Modification Änderung Issue / Stand 03-05 Date Datum Name Name A3360-SP Sheet Blatt SAND Profile GmbH - D-63811 Stockstadt - Dr.-Patt-Straße 9-11 D4 SAND Profile GmbH Dr.- Patt- Str. 9- 11 D- 63811 Stockstadt Tel.: +49 (0) 60 27/ 41 60 0 Fax: +49 (0) 60 27/ 41 60 69 E-Mail: [email protected] Web: www. sandprofile. com Notes: Bemerkungen: 1. SAND Profile reserves the right to modify this drawing without prior notification. SAND Profile behält sich das Recht vor, diese Zeichnung ohne vorherige Ankündigung zu ändern. 2. Unless stamped and signed this is an uncontrolled copy and will not be updated. You are responsible for ensuring you have the latest issue. Ohne Stempel und Unterschrift ist diese Zeichnung eine nicht kontrollierte Kopie und wird nicht aktualisiert. Die Verantwortung für die Aktualisierung nach dem neuesten Stand liegt bei Ihnen. 3. Minimum radius on corners to suit tooling and material. Die Eckenradien sind Minimalwerte, die dem Werkzeug und dem Material anzupassen sind. 4. Length: As required. Tolerance to be agreed with customer. Länge: Wie erforderlich. Toleranz: In Abstimmung mit dem Kunden. 5. Copyright: Without prior consent of SAND Profile GmbH this technical document must not be copied, duplicated or transmitted in any manner to a third party. This document and the information contained therein are confidential and property of SAND Profile GmbH (protection according to DIN ISO 16016 claimed). Copyright: Ohne vorherige Genehmigung der Fa. Sand Profile GmbH darf diese technische Unterlage weder kopiert, vervielfältigt noch auf irgendeine Weise Dritten zugänglich gemacht werden. Dieses Dokument und die darin enthaltene Information sind vertraulich und EIgentum der Fa. SAND Profile GmbH (Schutz nach DIN ISO 16016 beansprucht). Soft PVC PVC-Weich 11±0,5 7,2±0,3 78±3 ShoreA 21±0,7 wire carrier Drahtband Soft PVC PVC-Weich +0.2 2,8 -0.3 57±5 ShoreA M 1:1 Material / Werkstoff: Color / Farbe: Polyvinylchloride (PVC) Polyvinylchlorid (PVC) medium grey / mittelgrau 78±3 ShoreA transparent / transparent 57±5 ShoreA 2005 drawn by gez. von checked by gepr.von Hardness / Härte: Date / Datum 28.01. Name / Name 28.01. Sinke Scale / Maßstab 5:1, 1:1 Tolerance / Freimaßtoleranz: DIN 16941 3b Description / Benennung F. Schollen Edge Protector Profile Kantenschutzprofil Drawing no. / Zeichnungs-Nr. No Nr. Index Index Modification Änderung Issue / Stand 03-05 Date Datum Name Name A3013-SP Sheet Blatt SAND Profile GmbH - D-63811 Stockstadt - Dr.-Patt-Straße 9-11 D5 SAND Profile GmbH Dr.- Patt- Str. 9- 11 D- 63811 Stockstadt Tel.: +49 (0) 60 27/ 41 60 0 Fax: +49 (0) 60 27/ 41 60 69 E-Mail: [email protected] Web: www. sandprofile. com Notes: Bemerkungen: 4. Length: As required. Tolerance to be agreed with customer. Länge: Wie erforderlich. Toleranz: In Abstimmung mit dem Kunden. 5. Copyright: Without prior consent of SAND Profile GmbH this technical document must not be copied, duplicated or transmitted in any manner to a third party. This document and the information contained therein are confidential and property of SAND Profile GmbH (protection according to DIN ISO 16016 claimed). Copyright: Ohne vorherige Genehmigung der Fa. Sand Profile GmbH darf diese technische Unterlage weder kopiert, vervielfältigt noch auf irgendeine Weise Dritten zugänglich gemacht werden. Dieses Dokument und die darin enthaltene Information sind vertraulich und EIgentum der Fa. SAND Profile GmbH (Schutz nach DIN ISO 16016 beansprucht). 1. SAND Profile reserves the right to modify this drawing without prior notification. SAND Profile behält sich das Recht vor, diese Zeichnung ohne vorherige Ankündigung zu ändern. 2. Unless stamped and signed this is an uncontrolled copy and will not be updated. You are responsible for ensuring you have the latest issue. Ohne Stempel und Unterschrift ist diese Zeichnung eine nicht kontrollierte Kopie und wird nicht aktualisiert. Die Verantwortung für die Aktualisierung nach dem neuesten Stand liegt bei Ihnen. 3. Minimum radius on corners to suit tooling and material. Die Eckenradien sind Minimalwerte, die dem Werkzeug und dem Material anzupassen sind. 11±0,5 7,2±0,3 21±0,7 Soft PVC PVC-Weich 78±3 ShoreA wire carrier Drahtband +0.2 2,8 -0.3 Soft PVC PVC-Weich 57±5 ShoreA M 1:1 Material / Werkstoff: Color / Farbe: Hardness / Härte: Polyvinylchloride (PVC) Polyvinylchlorid (PVC) titanium grey / titangrau transparent / transparent 78±3 ShoreA 57±5 ShoreA 2005 drawn by gez. von checked by gepr.von Date / Datum 28.01. Name / Name 28.01. Sinke Scale / Maßstab 5:1, 1:1 Tolerance / Freimaßtoleranz: DIN 16941 3b Description / Benennung F. Schollen Edge Protector Profile Kantenschutzprofil Drawing no. / Zeichnungs-Nr. No Nr. Index Index Modification Änderung Issue / Stand 03-05 Date Datum Name Name A3045-SP Sheet Blatt SAND Profile GmbH - D-63811 Stockstadt - Dr.-Patt-Straße 9-11 D6 SAND Profile GmbH Dr.- Patt- Str. 9- 11 D- 63811 Stockstadt Tel.: +49 (0) 60 27/ 41 60 0 Fax: +49 (0) 60 27/ 41 60 69 E-Mail: [email protected] Web: www. sandprofile. com Notes: Bemerkungen: 4. Length: As required. Tolerance to be agreed with customer. Länge: Wie erforderlich. Toleranz: In Abstimmung mit dem Kunden. 5. Copyright: Without prior consent of SAND Profile GmbH this technical document must not be copied, duplicated or transmitted in any manner to a third party. This document and the information contained therein are confidential and property of SAND Profile GmbH (protection according to DIN ISO 16016 claimed). Copyright: Ohne vorherige Genehmigung der Fa. Sand Profile GmbH darf diese technische Unterlage weder kopiert, vervielfältigt noch auf irgendeine Weise Dritten zugänglich gemacht werden. Dieses Dokument und die darin enthaltene Information sind vertraulich und EIgentum der Fa. SAND Profile GmbH (Schutz nach DIN ISO 16016 beansprucht). 1. SAND Profile reserves the right to modify this drawing without prior notification. SAND Profile behält sich das Recht vor, diese Zeichnung ohne vorherige Ankündigung zu ändern. 2. Unless stamped and signed this is an uncontrolled copy and will not be updated. You are responsible for ensuring you have the latest issue. Ohne Stempel und Unterschrift ist diese Zeichnung eine nicht kontrollierte Kopie und wird nicht aktualisiert. Die Verantwortung für die Aktualisierung nach dem neuesten Stand liegt bei Ihnen. 3. Minimum radius on corners to suit tooling and material. Die Eckenradien sind Minimalwerte, die dem Werkzeug und dem Material anzupassen sind. 21±0,7 Soft PVC PVC-Weich 78±3 ShoreA 11±0,5 7,2±0,3 wire carrier Drahtband +0.2 2,8 -0.3 Soft PVC PVC-Weich 57±5 ShoreA M 1:1 Scale / Maßstab Material / Werkstoff: Color / Farbe: Hardness / Härte: Polyvinylchloride (PVC) Polyvinylchlorid (PVC) black / schwarz transparent / transparent 78±3 ShoreA 57±5 ShoreA 2005 drawn by gez. von checked by gepr.von Date / Datum 28.01. Name / Name 28.01. Sinke 5:1, 1:1 Tolerance / Freimaßtoleranz: DIN 16941 3b Description / Benennung F. Schollen Edge Protector Profile Kantenschutzprofil Drawing no. / Zeichnungs-Nr. No Nr. Index Index Modification Änderung Issue / Stand 03-05 Date Datum Name Name A3046-SP Sheet Blatt SAND Profile GmbH - D-63811 Stockstadt - Dr.-Patt-Straße 9-11 D7 SAND Profile GmbH Dr.- Patt- Str. 9- 11 D- 63811 Stockstadt Tel.: +49 (0) 60 27/ 41 60 0 Fax: +49 (0) 60 27/ 41 60 69 E-Mail: [email protected] Web: www. sandprofile. com Notes: Bemerkungen: 1. SAND Profile reserves the right to modify this drawing without prior notification. SAND Profile behält sich das Recht vor, diese Zeichnung ohne vorherige Ankündigung zu ändern. 2. Unless stamped and signed this is an uncontrolled copy and will not be updated. You are responsible for ensuring you have the latest issue. Ohne Stempel und Unterschrift ist diese Zeichnung eine nicht kontrollierte Kopie und wird nicht aktualisiert. Die Verantwortung für die Aktualisierung nach dem neuesten Stand liegt bei Ihnen. 3. Minimum radius on corners to suit tooling and material. Die Eckenradien sind Minimalwerte, die dem Werkzeug und dem Material anzupassen sind. 4. Length: As required. Tolerance to be agreed with customer. Länge: Wie erforderlich. Toleranz: In Abstimmung mit dem Kunden. 5. Copyright: Without prior consent of SAND Profile GmbH this technical document must not be copied, duplicated or transmitted in any manner to a third party. This document and the information contained therein are confidential and property of SAND Profile GmbH (protection according to DIN ISO 16016 claimed). Copyright: Ohne vorherige Genehmigung der Fa. Sand Profile GmbH darf diese technische Unterlage weder kopiert, vervielfältigt noch auf irgendeine Weise Dritten zugänglich gemacht werden. Dieses Dokument und die darin enthaltene Information sind vertraulich und EIgentum der Fa. SAND Profile GmbH (Schutz nach DIN ISO 16016 beansprucht). 21±0,7 Soft PVC PVC-Weich 78±3 ShoreA 11±0,5 7,2±0,3 wire carrier Drahtband 2,8 +0.2 -0.3 Soft PVC PVC-Weich 57±5 ShoreA M 1:1 Material / Werkstoff: Color / Farbe: pastel green / pastellgrün transparent / transparent Polyvinylchloride (PVC) Polyvinylchlorid (PVC) 2005 drawn by gez. von checked by gepr.von Scale / Maßstab Hardness / Härte: 78±3 ShoreA 57±5 ShoreA Date / Datum 28.01. Name / Name 28.01. Sinke 5:1, 1:1 Tolerance / Freimaßtoleranz: DIN 16941 3b Description / Benennung F. Schollen Edge Protector Profile Kantenschutzprofil Drawing no. / Zeichnungs-Nr. No Nr. Index Index Modification Änderung Issue / Stand 03-05 Date Datum Name Name A3047-SP Sheet Blatt SAND Profile GmbH - D-63811 Stockstadt - Dr.-Patt-Straße 9-11 D8 SAND Profile GmbH Dr.- Patt- Str. 9- 11 D- 63811 Stockstadt Tel.: +49 (0) 60 27/ 41 60 0 Fax: +49 (0) 60 27/ 41 60 69 E-Mail: [email protected] Web: www. sandprofile. com Notes: Bemerkungen: 4. Length: As required. Tolerance to be agreed with customer. Länge: Wie erforderlich. Toleranz: In Abstimmung mit dem Kunden. 5. Copyright: Without prior consent of SAND Profile GmbH this technical document must not be copied, duplicated or transmitted in any manner to a third party. This document and the information contained therein are confidential and property of SAND Profile GmbH (protection according to DIN ISO 16016 claimed). Copyright: Ohne vorherige Genehmigung der Fa. Sand Profile GmbH darf diese technische Unterlage weder kopiert, vervielfältigt noch auf irgendeine Weise Dritten zugänglich gemacht werden. Dieses Dokument und die darin enthaltene Information sind vertraulich und EIgentum der Fa. SAND Profile GmbH (Schutz nach DIN ISO 16016 beansprucht). 1. SAND Profile reserves the right to modify this drawing without prior notification. SAND Profile behält sich das Recht vor, diese Zeichnung ohne vorherige Ankündigung zu ändern. 2. Unless stamped and signed this is an uncontrolled copy and will not be updated. You are responsible for ensuring you have the latest issue. Ohne Stempel und Unterschrift ist diese Zeichnung eine nicht kontrollierte Kopie und wird nicht aktualisiert. Die Verantwortung für die Aktualisierung nach dem neuesten Stand liegt bei Ihnen. 3. Minimum radius on corners to suit tooling and material. Die Eckenradien sind Minimalwerte, die dem Werkzeug und dem Material anzupassen sind. wire carrier Drahtband 2,8 +0.2 -0.3 21 ±0,7 Soft PVC PVC-Weich 78±3 ShoreA 11 ±0,5 7,2 ±0,3 Soft PVC PVC-Weich 57±5 ShoreA M 1:1 Material / Werkstoff: Color / Farbe: Hardness / Härte: Polyvinylchloride (PVC) Polyvinylchlorid (PVC) light beige / hellbeige transparent / transparent 78±3 ShoreA 57±5 ShoreA 2005 drawn by gez. von checked by gepr.von Date / Datum 28.01. 28.01. Name / Name Scale / Maßstab 5:1, 1:1 Tolerance / Freimaßtoleranz: DIN 16941 3b Description / Benennung F. Schollen Sinke Edge Protector Profile Kantenschutzprofil Drawing no. / Zeichnungs-Nr. No Nr. Index Index Modification Änderung Issue / Stand 03-05 Date Datum Name Name A3048-SP Sheet Blatt SAND Profile GmbH - D-63811 Stockstadt - Dr.-Patt-Straße 9-11 D9 SAND Profile GmbH Dr.- Patt- Str. 9- 11 D- 63811 Stockstadt Tel.: +49 (0) 60 27/ 41 60 0 Fax: +49 (0) 60 27/ 41 60 69 E-Mail: [email protected] Web: www. sandprofile. com Notes: Bemerkungen: 4. Length: As required. Tolerance to be agreed with customer. Länge: Wie erforderlich. Toleranz: In Abstimmung mit dem Kunden. 5. Copyright: Without prior consent of SAND Profile GmbH this technical document must not be copied, duplicated or transmitted in any manner to a third party. This document and the information contained therein are confidential and property of SAND Profile GmbH (protection according to DIN ISO 16016 claimed). Copyright: Ohne vorherige Genehmigung der Fa. Sand Profile GmbH darf diese technische Unterlage weder kopiert, vervielfältigt noch auf irgendeine Weise Dritten zugänglich gemacht werden. Dieses Dokument und die darin enthaltene Information sind vertraulich und EIgentum der Fa. SAND Profile GmbH (Schutz nach DIN ISO 16016 beansprucht). 1. SAND Profile reserves the right to modify this drawing without prior notification. SAND Profile behält sich das Recht vor, diese Zeichnung ohne vorherige Ankündigung zu ändern. 2. Unless stamped and signed this is an uncontrolled copy and will not be updated. You are responsible for ensuring you have the latest issue. Ohne Stempel und Unterschrift ist diese Zeichnung eine nicht kontrollierte Kopie und wird nicht aktualisiert. Die Verantwortung für die Aktualisierung nach dem neuesten Stand liegt bei Ihnen. 3. Minimum radius on corners to suit tooling and material. Die Eckenradien sind Minimalwerte, die dem Werkzeug und dem Material anzupassen sind. 7,2 17 wire carrier Drahtband 10,5 Soft PVC PVC-Weich 78±3 ShoreA Soft PVC PVC-Weich 57±5 ShoreA 2,8 +0,5 -0 M 1:1 Material / Werkstoff: Color / Farbe: Hardness / Härte: Polyvinylchloride (PVC) Polyvinylchlorid (PVC) black / schwarz transparent / transparent 78±3 ShoreA 57±5 ShoreA 2005 drawn by gez. von checked by gepr.von Date / Datum 28.01. Name / Name 28.01. Sinke Scale / Maßstab Tolerance / Freimaßtoleranz: 10:1, 1:1 DIN 16941 3b Description / Benennung F. Schollen Edge Protection Profile Kantenschutzprofil Drawing no. / Zeichnungs-Nr. No Nr. Index Index Modification Änderung Issue / Stand 03-05 Date Datum Name Name A3071-SP Sheet Blatt SAND Profile GmbH - D-63811 Stockstadt - Dr.-Patt-Straße 9-11 D10 SAND Profile GmbH Dr.- Patt- Str. 9- 11 D- 63811 Stockstadt Tel.: +49 (0) 60 27/ 41 60 0 Fax: +49 (0) 60 27/ 41 60 69 E-Mail: [email protected] Web: www. sandprofile. com Notes: Bemerkungen: 4. Length: As required. Tolerance to be agreed with customer. Länge: Wie erforderlich. Toleranz: In Abstimmung mit dem Kunden. 5. Copyright: Without prior consent of SAND Profile GmbH this technical document must not be copied, duplicated or transmitted in any manner to a third party. This document and the information contained therein are confidential and property of SAND Profile GmbH (protection according to DIN ISO 16016 claimed). Copyright: Ohne vorherige Genehmigung der Fa. Sand Profile GmbH darf diese technische Unterlage weder kopiert, vervielfältigt noch auf irgendeine Weise Dritten zugänglich gemacht werden. Dieses Dokument und die darin enthaltene Information sind vertraulich und EIgentum der Fa. SAND Profile GmbH (Schutz nach DIN ISO 16016 beansprucht). 1. SAND Profile reserves the right to modify this drawing without prior notification. SAND Profile behält sich das Recht vor, diese Zeichnung ohne vorherige Ankündigung zu ändern. 2. Unless stamped and signed this is an uncontrolled copy and will not be updated. You are responsible for ensuring you have the latest issue. Ohne Stempel und Unterschrift ist diese Zeichnung eine nicht kontrollierte Kopie und wird nicht aktualisiert. Die Verantwortung für die Aktualisierung nach dem neuesten Stand liegt bei Ihnen. 3. Minimum radius on corners to suit tooling and material. Die Eckenradien sind Minimalwerte, die dem Werkzeug und dem Material anzupassen sind. 7,6±0,3 steel carrier Stahlband 17,1±0,3 10,2±0,3 Soft PVC PVC-Weich 78±5 ShoreA 3,2 M 1:1 Soft PVC PVC-Weich 57±5 ShoreA Material / Werkstoff: Color / Farbe: Hardness / Härte: Polyvinylchloride (PVC) Polyvinylchlorid (PVC) transparent / transparent black / schwarz 78±5 ShoreA 57±5 ShoreA 2005 drawn by gez. von checked by gepr.von Date / Datum 28.01. Name / Name 28.01. Sinke Scale / Maßstab 5:1, 1:1 Tolerance / Freimaßtoleranz: DIN 16941 3b Description / Benennung F. Schollen Edge Protection Profile Kantenschutzprofil Drawing no. / Zeichnungs-Nr. No Nr. Index Index Modification Änderung Issue / Stand 03-05 Date Datum Name Name A3207-SP Sheet Blatt SAND Profile GmbH - D-63811 Stockstadt - Dr.-Patt-Straße 9-11 D11 SAND Profile GmbH Dr.- Patt- Str. 9- 11 D- 63811 Stockstadt Tel.: +49 (0) 60 27/ 41 60 0 Fax: +49 (0) 60 27/ 41 60 69 E-Mail: [email protected] Web: www. sandprofile. com Notes: Bemerkungen: 4. Length: As required. Tolerance to be agreed with customer. Länge: Wie erforderlich. Toleranz: In Abstimmung mit dem Kunden. 5. Copyright: Without prior consent of SAND Profile GmbH this technical document must not be copied, duplicated or transmitted in any manner to a third party. This document and the information contained therein are confidential and property of SAND Profile GmbH (protection according to DIN ISO 16016 claimed). Copyright: Ohne vorherige Genehmigung der Fa. Sand Profile GmbH darf diese technische Unterlage weder kopiert, vervielfältigt noch auf irgendeine Weise Dritten zugänglich gemacht werden. Dieses Dokument und die darin enthaltene Information sind vertraulich und EIgentum der Fa. SAND Profile GmbH (Schutz nach DIN ISO 16016 beansprucht). 1. SAND Profile reserves the right to modify this drawing without prior notification. SAND Profile behält sich das Recht vor, diese Zeichnung ohne vorherige Ankündigung zu ändern. 2. Unless stamped and signed this is an uncontrolled copy and will not be updated. You are responsible for ensuring you have the latest issue. Ohne Stempel und Unterschrift ist diese Zeichnung eine nicht kontrollierte Kopie und wird nicht aktualisiert. Die Verantwortung für die Aktualisierung nach dem neuesten Stand liegt bei Ihnen. 3. Minimum radius on corners to suit tooling and material. Die Eckenradien sind Minimalwerte, die dem Werkzeug und dem Material anzupassen sind. 9,3±0,3 10,2 18,5 +0,7 0 ±0,3 wire carrier Drahtband Soft PVC PVC-Weich 78±3 ShoreA 4.2 (9.2) Soft PVC PVC-Weich 57±5 ShoreA M 1:1 Material / Werkstoff: Color / Farbe: Hardness / Härte: Polyvinylchloride (PVC) Polyvinylchlorid (PVC) black / schwarz transparent / transparent 78±3 ShoreA 57±5 ShoreA 2005 drawn by gez. von checked by gepr.von Date / Datum 28.01. Name / Name 28.01. Sinke ±0,3 Scale / Maßstab Tolerance / Freimaßtoleranz: 10:1, 1:1 DIN 16941 3b Description / Benennung F. Schollen Edge Protection Profile Kantenschutzprofil Drawing no. / Zeichnungs-Nr. No Nr. Index Index Modification Änderung Issue / Stand 03-05 Date Datum Name Name A3258-SP Sheet Blatt SAND Profile GmbH - D-63811 Stockstadt - Dr.-Patt-Straße 9-11 D12 SAND Profile GmbH Dr.- Patt- Str. 9- 11 D- 63811 Stockstadt Tel.: +49 (0) 60 27/ 41 60 0 Fax: +49 (0) 60 27/ 41 60 69 E-Mail: [email protected] Web: www. sandprofile. com Notes: Bemerkungen: 4. Length: As required. Tolerance to be agreed with customer. Länge: Wie erforderlich. Toleranz: In Abstimmung mit dem Kunden. 5. Copyright: Without prior consent of SAND Profile GmbH this technical document must not be copied, duplicated or transmitted in any manner to a third party. This document and the information contained therein are confidential and property of SAND Profile GmbH (protection according to DIN ISO 16016 claimed). Copyright: Ohne vorherige Genehmigung der Fa. Sand Profile GmbH darf diese technische Unterlage weder kopiert, vervielfältigt noch auf irgendeine Weise Dritten zugänglich gemacht werden. Dieses Dokument und die darin enthaltene Information sind vertraulich und EIgentum der Fa. SAND Profile GmbH (Schutz nach DIN ISO 16016 beansprucht). 1. SAND Profile reserves the right to modify this drawing without prior notification. SAND Profile behält sich das Recht vor, diese Zeichnung ohne vorherige Ankündigung zu ändern. 2. Unless stamped and signed this is an uncontrolled copy and will not be updated. You are responsible for ensuring you have the latest issue. Ohne Stempel und Unterschrift ist diese Zeichnung eine nicht kontrollierte Kopie und wird nicht aktualisiert. Die Verantwortung für die Aktualisierung nach dem neuesten Stand liegt bei Ihnen. 3. Minimum radius on corners to suit tooling and material. Die Eckenradien sind Minimalwerte, die dem Werkzeug und dem Material anzupassen sind. 8±0.3 17,1±0.3 PVC-Weich 78±5 ShoreA 10,2±0.3 wire carrier Drahtband 3,2 Soft PVC PVC-Weich 57±5 ShoreA M 1:1 Material / Werkstoff: Color / Farbe: Hardness / Härte: Polyvinylchloride (PVC) Polyvinylchlorid (PVC) black / schwarz transparent / transparent 78±5 ShoreA 57±5 ShoreA 2005 drawn by gez. von checked by gepr.von Date / Datum 28.01. Name / Name 28.01. Sinke Scale / Maßstab 5:1, 1:1 Tolerance / Freimaßtoleranz: DIN 16941 3b Description / Benennung F. Schollen Edge Protection Profile Kantenschutzprofil Drawing no. / Zeichnungs-Nr. No Nr. Index Index Modification Änderung Issue / Stand 03-05 Date Datum Name Name A3282-SP Sheet Blatt SAND Profile GmbH - D-63811 Stockstadt - Dr.-Patt-Straße 9-11 D13 SAND Profile GmbH Dr.- Patt- Str. 9- 11 D- 63811 Stockstadt Tel.: +49 (0) 60 27/ 41 60 0 Fax: +49 (0) 60 27/ 41 60 69 E-Mail: [email protected] Web: www. sandprofile. com Notes: Bemerkungen: 1. SAND Profile reserves the right to modify this drawing without prior notification. SAND Profile behält sich das Recht vor, diese Zeichnung ohne vorherige Ankündigung zu ändern. 2. Unless stamped and signed this is an uncontrolled copy and will not be updated. You are responsible for ensuring you have the latest issue. Ohne Stempel und Unterschrift ist diese Zeichnung eine nicht kontrollierte Kopie und wird nicht aktualisiert. Die Verantwortung für die Aktualisierung nach dem neuesten Stand liegt bei Ihnen. 3. Minimum radius on corners to suit tooling and material. Die Eckenradien sind Minimalwerte, die dem Werkzeug und dem Material anzupassen sind. 4. Length: As required. Tolerance to be agreed with customer. Länge: Wie erforderlich. Toleranz: In Abstimmung mit dem Kunden. 5. Copyright: Without prior consent of SAND Profile GmbH this technical document must not be copied, duplicated or transmitted in any manner to a third party. This document and the information contained therein are confidential and property of SAND Profile GmbH (protection according to DIN ISO 16016 claimed). Copyright: Ohne vorherige Genehmigung der Fa. Sand Profile GmbH darf diese technische Unterlage weder kopiert, vervielfältigt noch auf irgendeine Weise Dritten zugänglich gemacht werden. Dieses Dokument und die darin enthaltene Information sind vertraulich und EIgentum der Fa. SAND Profile GmbH (Schutz nach DIN ISO 16016 beansprucht). 6.5 steel carrier Stahlband 9.5 Soft PVC PVC-Weich 57±5 ShoreA Soft PVC PVC-Weich 78±3 ShoreA M 1:1 1.7 (2.5) Material / Werkstoff: Color / Farbe: Hardness / Härte: Polyvinylchloride (PVC) Polyvinylchlorid (PVC) transparent / transparent black / schwarz 57±5 ShoreA 78±3 ShoreA 2005 drawn by gez. von checked by gepr.von Date / Datum 28.01. Name / Name 28.01. Sinke Scale / Maßstab Tolerance / Freimaßtoleranz: 10:1, 1:1 DIN 16941 3b Description / Benennung F. Schollen Edge Protection Profile Kantenschutzprofil Drawing no. / Zeichnungs-Nr. No Nr. Index Index Modification Änderung Issue / Stand 03-05 Date Datum Name Name A3317-SP Sheet Blatt SAND Profile GmbH - D-63811 Stockstadt - Dr.-Patt-Straße 9-11 D14 SAND Profile GmbH Dr.- Patt- Str. 9- 11 D- 63811 Stockstadt Tel.: +49 (0) 60 27/ 41 60 0 Fax: +49 (0) 60 27/ 41 60 69 E-Mail: [email protected] Web: www. sandprofile. com Notes: Bemerkungen: 1. SAND Profile reserves the right to modify this drawing without prior notification. SAND Profile behält sich das Recht vor, diese Zeichnung ohne vorherige Ankündigung zu ändern. 2. Unless stamped and signed this is an uncontrolled copy and will not be updated. You are responsible for ensuring you have the latest issue. Ohne Stempel und Unterschrift ist diese Zeichnung eine nicht kontrollierte Kopie und wird nicht aktualisiert. Die Verantwortung für die Aktualisierung nach dem neuesten Stand liegt bei Ihnen. 3. Minimum radius on corners to suit tooling and material. Die Eckenradien sind Minimalwerte, die dem Werkzeug und dem Material anzupassen sind. 4. Length: As required. Tolerance to be agreed with customer. Länge: Wie erforderlich. Toleranz: In Abstimmung mit dem Kunden. 5. Copyright: Without prior consent of SAND Profile GmbH this technical document must not be copied, duplicated or transmitted in any manner to a third party. This document and the information contained therein are confidential and property of SAND Profile GmbH (protection according to DIN ISO 16016 claimed). Copyright: Ohne vorherige Genehmigung der Fa. Sand Profile GmbH darf diese technische Unterlage weder kopiert, vervielfältigt noch auf irgendeine Weise Dritten zugänglich gemacht werden. Dieses Dokument und die darin enthaltene Information sind vertraulich und EIgentum der Fa. SAND Profile GmbH (Schutz nach DIN ISO 16016 beansprucht). +0,2 16,6 -0,7 Soft PVC PVC-Weich 78±3 ShoreA 10,2±0,3 9,3±0,3 Soft PVC PVC-Weich 57±5 ShoreA 4.2±0,3 wire carrier Drahtband M 1:1 Material / Werkstoff: Color / Farbe: Hardness / Härte: Polyvinylchloride (PVC) Polyvinylchlorid (PVC) black / schwarz transparent / transparent 78±3 ShoreA 57±5 ShoreA 2005 drawn by gez. von checked by gepr.von Date / Datum 28.01. Name / Name 28.01. Sinke Scale / Maßstab Tolerance / Freimaßtoleranz: 10:1, 1:1 DIN 16941 3b Description / Benennung F. Schollen Edge Protection Profile Kantenschutzprofil Drawing no. / Zeichnungs-Nr. No Nr. Index Index Modification Änderung Issue / Stand 03-05 Date Datum Name Name A3357-SP Sheet Blatt SAND Profile GmbH - D-63811 Stockstadt - Dr.-Patt-Straße 9-11 D15 SAND Profile GmbH Dr.- Patt- Str. 9- 11 D- 63811 Stockstadt Tel.: +49 (0) 60 27/ 41 60 0 Fax: +49 (0) 60 27/ 41 60 69 E-Mail: [email protected] Web: www. sandprofile. com Notes: Bemerkungen: 4. Length: As required. Tolerance to be agreed with customer. Länge: Wie erforderlich. Toleranz: In Abstimmung mit dem Kunden. 5. Copyright: Without prior consent of SAND Profile GmbH this technical document must not be copied, duplicated or transmitted in any manner to a third party. This document and the information contained therein are confidential and property of SAND Profile GmbH (protection according to DIN ISO 16016 claimed). Copyright: Ohne vorherige Genehmigung der Fa. Sand Profile GmbH darf diese technische Unterlage weder kopiert, vervielfältigt noch auf irgendeine Weise Dritten zugänglich gemacht werden. Dieses Dokument und die darin enthaltene Information sind vertraulich und EIgentum der Fa. SAND Profile GmbH (Schutz nach DIN ISO 16016 beansprucht). 1. SAND Profile reserves the right to modify this drawing without prior notification. SAND Profile behält sich das Recht vor, diese Zeichnung ohne vorherige Ankündigung zu ändern. 2. Unless stamped and signed this is an uncontrolled copy and will not be updated. You are responsible for ensuring you have the latest issue. Ohne Stempel und Unterschrift ist diese Zeichnung eine nicht kontrollierte Kopie und wird nicht aktualisiert. Die Verantwortung für die Aktualisierung nach dem neuesten Stand liegt bei Ihnen. 3. Minimum radius on corners to suit tooling and material. Die Eckenradien sind Minimalwerte, die dem Werkzeug und dem Material anzupassen sind. steel carrier Stahlband 9,5 Soft PVC PVC-Weich 57±5 ShoreA 12,2 15,2 10,2 Soft PVC PVC-Weich 78±3 ShoreA (5) 2 M 1:1 Material / Werkstoff: Color / Farbe: Hardness / Härte: Polyvinylchloride (PVC) Polyvinylchlorid (PVC) transparent / transparent black / schwarz 57±5 ShoreA 78±5 ShoreA 2005 drawn by gez. von checked by gepr.von Date / Datum 28.01. Name / Name 28.01. Sinke Scale / Maßstab Tolerance / Freimaßtoleranz: 10:1, 1:1 DIN 16941 3b Description / Benennung F. Schollen Edge Protection Profile Kantenschutzprofil Drawing no. / Zeichnungs-Nr. No Nr. Index Index Modification Änderung Issue / Stand 03-05 Date Datum Name Name A3375-SP Sheet Blatt SAND Profile GmbH - D-63811 Stockstadt - Dr.-Patt-Straße 9-11 D16 SAND Profile GmbH Dr.- Patt- Str. 9- 11 D- 63811 Stockstadt Tel.: +49 (0) 60 27/ 41 60 0 Fax: +49 (0) 60 27/ 41 60 69 E-Mail: [email protected] Web: www. sandprofile. com Notes: Bemerkungen: 4. Length: As required. Tolerance to be agreed with customer. Länge: Wie erforderlich. Toleranz: In Abstimmung mit dem Kunden. 5. Copyright: Without prior consent of SAND Profile GmbH this technical document must not be copied, duplicated or transmitted in any manner to a third party. This document and the information contained therein are confidential and property of SAND Profile GmbH (protection according to DIN ISO 16016 claimed). Copyright: Ohne vorherige Genehmigung der Fa. Sand Profile GmbH darf diese technische Unterlage weder kopiert, vervielfältigt noch auf irgendeine Weise Dritten zugänglich gemacht werden. Dieses Dokument und die darin enthaltene Information sind vertraulich und EIgentum der Fa. SAND Profile GmbH (Schutz nach DIN ISO 16016 beansprucht). 1. SAND Profile reserves the right to modify this drawing without prior notification. SAND Profile behält sich das Recht vor, diese Zeichnung ohne vorherige Ankündigung zu ändern. 2. Unless stamped and signed this is an uncontrolled copy and will not be updated. You are responsible for ensuring you have the latest issue. Ohne Stempel und Unterschrift ist diese Zeichnung eine nicht kontrollierte Kopie und wird nicht aktualisiert. Die Verantwortung für die Aktualisierung nach dem neuesten Stand liegt bei Ihnen. 3. Minimum radius on corners to suit tooling and material. Die Eckenradien sind Minimalwerte, die dem Werkzeug und dem Material anzupassen sind. Soft PVC PVC-Weich 78±5 ShoreA 6 2,3 23,2 wire carrier Drahtband 13,8 Soft PVC PVC-Weich 57±5 ShoreA M 1:1 10,6 Material / Werkstoff: Color / Farbe: Hardness / Härte: Polyvinylchloride (PVC) Polyvinylchlorid (PVC) black / schwarz transparent / transparent 78±5 ShoreA 57±5 ShoreA 2005 drawn by gez. von checked by gepr.von Date / Datum 28.01. Name / Name 28.01. Sinke Scale / Maßstab 5:1, 1:1 Tolerance / Freimaßtoleranz: DIN 16941 3b Description / Benennung F. Schollen Edge Protection Profile Kantenschutzprofil Drawing no. / Zeichnungs-Nr. No Nr. Index Index Modification Änderung Issue / Stand 03-05 Date Datum Name Name A3480-SP Sheet Blatt SAND Profile GmbH - D-63811 Stockstadt - Dr.-Patt-Straße 9-11 D17 SAND Profile GmbH Dr.- Patt- Str. 9- 11 D- 63811 Stockstadt Tel.: +49 (0) 60 27/ 41 60 0 Fax: +49 (0) 60 27/ 41 60 69 E-Mail: [email protected] Web: www. sandprofile. com Notes: Bemerkungen: 4. Length: As required. Tolerance to be agreed with customer. Länge: Wie erforderlich. Toleranz: In Abstimmung mit dem Kunden. 5. Copyright: Without prior consent of SAND Profile GmbH this technical document must not be copied, duplicated or transmitted in any manner to a third party. This document and the information contained therein are confidential and property of SAND Profile GmbH (protection according to DIN ISO 16016 claimed). Copyright: Ohne vorherige Genehmigung der Fa. Sand Profile GmbH darf diese technische Unterlage weder kopiert, vervielfältigt noch auf irgendeine Weise Dritten zugänglich gemacht werden. Dieses Dokument und die darin enthaltene Information sind vertraulich und EIgentum der Fa. SAND Profile GmbH (Schutz nach DIN ISO 16016 beansprucht). 1. SAND Profile reserves the right to modify this drawing without prior notification. SAND Profile behält sich das Recht vor, diese Zeichnung ohne vorherige Ankündigung zu ändern. 2. Unless stamped and signed this is an uncontrolled copy and will not be updated. You are responsible for ensuring you have the latest issue. Ohne Stempel und Unterschrift ist diese Zeichnung eine nicht kontrollierte Kopie und wird nicht aktualisiert. Die Verantwortung für die Aktualisierung nach dem neuesten Stand liegt bei Ihnen. 3. Minimum radius on corners to suit tooling and material. Die Eckenradien sind Minimalwerte, die dem Werkzeug und dem Material anzupassen sind. 9 15 Soft PVC PVC-Weich 78±3 ShoreA Soft PVC PVC-Weich 57±5 ShoreA 30±2 wire carrier Drahtband 2,5 M 1:1 1 Material / Werkstoff: Color / Farbe: Hardness / Härte: Polyvinylchloride (PVC) Polyvinylchlorid (PVC) black / schwarz transparent / transparent 78±3 ShoreA 57±5 ShoreA 2005 drawn by gez. von checked by gepr.von Date / Datum 28.01. Name / Name 28.01. Sinke Scale / Maßstab 5:1, 1:1 Tolerance / Freimaßtoleranz: DIN 16941 3b Description / Benennung F. Schollen Edge Protection Profile Kantenschutzprofil Drawing no. / Zeichnungs-Nr. No Nr. Index Index Modification Änderung Issue / Stand 03-05 Date Datum Name Name A3484-SP Sheet Blatt SAND Profile GmbH - D-63811 Stockstadt - Dr.-Patt-Straße 9-11 D18 SAND Profile GmbH Dr.- Patt- Str. 9- 11 D- 63811 Stockstadt Tel.: +49 (0) 60 27/ 41 60 0 Fax: +49 (0) 60 27/ 41 60 69 E-Mail: [email protected] Web: www. sandprofile. com Notes: Bemerkungen: 4. Length: As required. Tolerance to be agreed with customer. Länge: Wie erforderlich. Toleranz: In Abstimmung mit dem Kunden. 5. Copyright: Without prior consent of SAND Profile GmbH this technical document must not be copied, duplicated or transmitted in any manner to a third party. This document and the information contained therein are confidential and property of SAND Profile GmbH (protection according to DIN ISO 16016 claimed). Copyright: Ohne vorherige Genehmigung der Fa. Sand Profile GmbH darf diese technische Unterlage weder kopiert, vervielfältigt noch auf irgendeine Weise Dritten zugänglich gemacht werden. Dieses Dokument und die darin enthaltene Information sind vertraulich und EIgentum der Fa. SAND Profile GmbH (Schutz nach DIN ISO 16016 beansprucht). 1. SAND Profile reserves the right to modify this drawing without prior notification. SAND Profile behält sich das Recht vor, diese Zeichnung ohne vorherige Ankündigung zu ändern. 2. Unless stamped and signed this is an uncontrolled copy and will not be updated. You are responsible for ensuring you have the latest issue. Ohne Stempel und Unterschrift ist diese Zeichnung eine nicht kontrollierte Kopie und wird nicht aktualisiert. Die Verantwortung für die Aktualisierung nach dem neuesten Stand liegt bei Ihnen. 3. Minimum radius on corners to suit tooling and material. Die Eckenradien sind Minimalwerte, die dem Werkzeug und dem Material anzupassen sind. 7,6±0,3 wire carrier Drahtband 11±0,5 Soft PVC PVC-Weich 78±3 ShoreA 20,8±0,7 Soft PVC PVC-Weich 57±5 ShoreA (2,3) 3+0,2 / -0 M 1:1 Material / Werkstoff: Color / Farbe: Hardness / Härte: Polyvinylchloride (PVC) Polyvinylchlorid (PVC) black / schwarz transparent / transparent 78±3 ShoreA 57±5 ShoreA 2005 drawn by gez. von checked by gepr.von Date / Datum 28.01. Name / Name 28.01. Sinke Scale / Maßstab 5:1, 1:1 Tolerance / Freimaßtoleranz: DIN 16941 3b Description / Benennung F. Schollen Edge Protection Profile Kantenschutzprofil Drawing no. / Zeichnungs-Nr. No Nr. Index Index Modification Änderung Issue / Stand 03-05 Date Datum Name Name A3498-SP Sheet Blatt SAND Profile GmbH - D-63811 Stockstadt - Dr.-Patt-Straße 9-11 D19 SAND Profile GmbH Dr.- Patt- Str. 9- 11 D- 63811 Stockstadt Tel.: +49 (0) 60 27/ 41 60 0 Fax: +49 (0) 60 27/ 41 60 69 E-Mail: [email protected] Web: www. sandprofile. com Notes: Bemerkungen: 1. SAND Profile reserves the right to modify this drawing without prior notification. SAND Profile behält sich das Recht vor, diese Zeichnung ohne vorherige Ankündigung zu ändern. 2. Unless stamped and signed this is an uncontrolled copy and will not be updated. You are responsible for ensuring you have the latest issue. Ohne Stempel und Unterschrift ist diese Zeichnung eine nicht kontrollierte Kopie und wird nicht aktualisiert. Die Verantwortung für die Aktualisierung nach dem neuesten Stand liegt bei Ihnen. 3. Minimum radius on corners to suit tooling and material. Die Eckenradien sind Minimalwerte, die dem Werkzeug und dem Material anzupassen sind. 4. Length: As required. Tolerance to be agreed with customer. Länge: Wie erforderlich. Toleranz: In Abstimmung mit dem Kunden. 5. Copyright: Without prior consent of SAND Profile GmbH this technical document must not be copied, duplicated or transmitted in any manner to a third party. This document and the information contained therein are confidential and property of SAND Profile GmbH (protection according to DIN ISO 16016 claimed). Copyright: Ohne vorherige Genehmigung der Fa. Sand Profile GmbH darf diese technische Unterlage weder kopiert, vervielfältigt noch auf irgendeine Weise Dritten zugänglich gemacht werden. Dieses Dokument und die darin enthaltene Information sind vertraulich und EIgentum der Fa. SAND Profile GmbH (Schutz nach DIN ISO 16016 beansprucht). 10 steel carrier Stahlband 14.5 Soft PVC PVC-Weich Soft PVC PVC-Weich (5) 2 M 1:1 Material / Werkstoff: Color / Farbe: Polyvinylchloride (PVC) Polyvinylchlorid (PVC) transparent / transparent black / schwarz 2005 drawn by gez. von checked by gepr.von Hardness / Härte: Scale / Maßstab 5:1, 1:1 Date / Datum 28.01. Name / Name 28.01. Sinke Tolerance / Freimaßtoleranz: DIN 16941 3b Description / Benennung F. Schollen Edge Protection Profile Kantenschutzprofil Drawing no. / Zeichnungs-Nr. No Nr. Index Index Modification Änderung Issue / Stand 03-05 Date Datum Name Name A3507-SP Sheet Blatt SAND Profile GmbH - D-63811 Stockstadt - Dr.-Patt-Straße 9-11 D20