How to handle a job in AS400

How to handle a job in AS400
José Luis GAMERO to: Stoyan VLADOV, Ivan IVANOV
09.07.2010 14:32
Cc: Boyko BLAGOEV
Hi all,
Find below a short explanation about how to handle a job in AS400 :
1. First, note the job's name. Shift + F3 , see submit jobs + (shift + F6 to settle on the end of the list).
For example, TRT_REC_RB for recycle .
2. Over the command line , type WRKJOB (the name of the job).
3. One screen like this will be displayed.
4. Type 1 in front of the preferred job . A menu like described below will be displayed.
5. Enter 10 to see historical job. There you will find message, if they are. If job is finished, nothing will
be displayed.
I hope this short explanation will be enough to understand how to recognize a message on the system
and where it comes from.
Don't hesitate to contact me if you have any question.
Regards.
Jose.
Jose Gamero
Analyste Programmeur
[email protected]
Tél. : 0607049338
Avant d'imprimer, pensez à l'environnement
---------------------------------------=> Avant d'imprimer ce courrier, réfléchissons à l'impact sur l'environnement !