CP K2013 CPLY DV
Transcription
CP K2013 CPLY DV
COMMUNIQUE DE PRESSE 15 octobre 2013 C-PLY™ utilisé pour la première fois en démonstration « live » lors du salon K’2013 CHOMARAT, spécialiste en renforts textiles pour composites est partie prenante du projet ‘RTM in mold Coatings’ grâce à sa gamme de renforts carbone NCF étalés. C-PLY™ Spread intégré dans le projet collaboratif : « RTM-in mold coatings » Pour la première fois, est fabriqué en temps réel et en série, un panneau de toit en carbone pour le roadster Roding durant le salon K2013. Ce projet innovant est issu d’un partenariat regroupant des acteurs majeurs de la filière composites, et est placé sous la houlette de KraussMaffei* . Cette dernière avancée technologique sur un procédé RTM utilisant un système PU avec des temps de cycle courts, permet l'obtention de pièces composites d'aspect en sortie de moule. En effet, l'enjeu associé C-PLY SP BX240 T3,3 50K HS Example of +/-45 biaxial (120gsm 50K per layer) à ce procédé est d'obtenir avec le même outillage un aspect de surface compatible soit avec un design carbone apparent, soit avec une qualité de surface permettant des peintures classe A, et ce, sans aucune préparation préliminaire ou reprise postérieure. L’utilisation de C-PLY™ SPREAD en tant que renfort contribue à la réussite de ce projet. C-PLY™ est une gamme de renforts carbone NCF développée grâce aux dernières technologies d’étalement des fibres. Elle permet d’obtenir des couches fines parfaitement planes et homogènes limitant l’apparition de microfissures. Sa construction particulière lui donne la souplesse nécessaire pour le rendre facilement déformable et permet un bon positionnement dans le moule tout en conservant une bonne perméabilité pour l’injection RTM. Outre des qualités d’aspect, l’utilisation de C-PLY™SP réduit le coût et le poids des pièces composites en optimisant les performances. Les démonstrations live auront lieu sur le stand de KraussMaffei Hall 15, B27/C24/C27/D24 durant le salon K2013,du 16 au 23 octobre à Düsseldorf. *Les partenaires du projet : KraussMaffei, Dieffenbacher GmbH, Alpex, Henkel AG & Co.KGa, Rühl Puromer GmbH, Chomarat, Zoltek, Roding Automobile GmbH, Mühlmeier GmbH & Co. KG, Handte Umwelttechnik GmbH, Hahn Enersave GmbH CHOMARAT est aujourd’hui un groupe textile, familial et indépendant qui a développé sa présence à l’international et compte aujourd’hui 1 500 collaborateurs. Présent en Europe, dans le bassin méditerranéen, aux Etats-Unis et en Asie, il s’appuie sur une organisation mondiale constituée de trois strategic business units: Composites, Textiles, et Fashion. Innovant depuis 1898, le Groupe a développé de très nombreux savoir-faire qui reposent sur de fortes compétences humaines et une maîtrise de technologies complexes, qui lui permettent d’accompagner les transformateurs dans les secteurs exigeants de l’automobile, l’aéronautique, l’électronique, le sport, le luxe, l’énergie, la marine, le bâtiment, la protection et le génie civil. En 2012, le Groupe a réalisé un chiffre d’affaires de 146 M€. www.chomarat.com Press contacts: APOCOPE - Dorothée DAVID – Justine ROHÉE Tel: +33 145 788 737 – e-mail: [email protected] PRESS RELEASE October 17, 2013 C-PLY™ used for the first time in a "live" demonstration at the K 2013 show CHOMARAT, which specializes in textile reinforcements for composites, is an active participant in the "RTM in mold Coatings" project thanks to its line of spread NCF carbon reinforcements. C-PLY™ Spread integrated into the collaborative project: "RTM-in mold coatings" For the first time, a carbon roof panel for the Roding roadster is made in real time, and mass produced, at the K’2013 show. This innovative project is the birthchild of a partnership between major players in the composites field, under the leadership of KraussMaffei*. This latest technological advancement in an RTM process using a PU system with short cycle times makes it possible to produce composite parts with an excellent surface quality directly out of the mold. Indeed, C-PLY SP BX240 T3,3 50K HS Example of +/-45 biaxial (120gsm 50K per layer) the challenge of this process is to obtain, with the same tooling, a surface appearance that is compatible with both a visible carbon design and a surface quality allowing class A paints without any preliminary preparation or subsequent retouching. The use of C-PLY™ Spread as a reinforcement contributes to the success of this project. C-PLY™ is a line of NCF carbon reinforcements developed by means of the latest fiber spread technologies. The line provides perfectly flat and homogeneous thin layers which limit the occurrence of microcracks. Its special construction gives it the necessary flexibility to make it readily deformable, and allows good positioning in the mold while still maintaining good permeability for RTM injection. In addition to its visual qualities, the use of C-PLY™SP reduces the cost and weight of composite parts while optimizing performance. Live demonstrations will take place at KraussMaffei Hall 15, B27/C24/C27/D24 during the K’2013 Show from October 16 to 23, in Düsseldorf. *Partners in the project: KraussMaffei, Dieffenbacher GmbH, Alpex, Henkel AG & Co.KGa, Rühl Puromehr GmbH, Chomarat, Zoltek, Roding Automobile GmbH, Mühlmeier GmbH & Co. KG, Handte Umwelttechnik GmbH, Hahn Enersave GmbH CHOMARAT is an independent, family-owned textile group which has developed an international presence and now boasts a workforce of 1,500. With its presence in Europe, the Mediterranean, the United States, and Asia, the company is built on a worldwide organization consisting of three strategic business units: Composites, Textiles, and Fashion. As an innovator since 1898, the Group has developed a vast body of know-how based on strong human expertise and a mastery of complex technologies, allowing the Group to assist manufacturers in such demanding sectors as the automobile, aeronautic, electronic, sports, luxury, energy, marine, construction, security, and civil engineering industries. The Group achieved sales of €146 million in 2012. www.chomarat.com Press contacts: APOCOPE - Dorothée David – Justine Rohée Tel: +33 145 788 737 – E-mail: [email protected]