Multi layer insulation by MICEL (002)
Transcription
Multi layer insulation by MICEL (002)
« Multi Layer Insulation (MLI) Isolation multi-couche Les composants The components KAPTON® POLYESTER Kapton type HN, film polyimide (PI), épaisseur de 7,5 µm à 125 µm, largeur standard 1220 mm. Film polyester (PET), épaisseur de 0,6 µm à 480 µm, largeur standard 1220 mm, disponible jusqu’à 1600 mm. Kapton® type VN, film polyimide thermostabilisé, épaisseur de 12,5 µm à 125 µm, largeur standard 1220 mm. D’autres films polyesters (Mylar®, Melinex®, …) ayant des caractéristiques spécifiques (thermostabilité, avec traitement promoteurs d’adhérence, etc…) sont disponibles. ® Kapton® XC, film polyimide conducteur ou anti-statique, largeur standard 1220 mm. METALLISATION METALLIZATION D’autres films polyimides Kapton® ayant des caractéristiques spécifiques (thermo-adhérents, formables 3D, etc…) sont disponibles. Kapton® Type HN, Polyimide film (PI), 7,5 µm to 125 µm thickness, 1220 mm standard width. Kapton® Type VN, Heat stabilized polyimide film, 12,5 µm to 125 µm thickness, 1220 mm standard width. Kapton® Type XC, Conductive polyimide film or antistatic polyimide film, 1220 mm standard width. Kapton® Type CB, carbon charged polyimide film, low light transmission and low reflectivity, 25 µm to 80 µm thickness, 1220 mm standard width. Other Kapton® polyimide films displaying certain characteristics (thermal adhesives, 3D formings etc…) are also available. Aluminium pureté 99,5% Dépôt standard 1 face 300 Å mini Dépôt 2 faces 300 Å par face Autes épaisseurs sur demande de 100 Å à 800 Å Largeur possible jusqu’à 2400 mm. Aluminium of 99,5% purity. Standard deposit of 300 Å on 1 side. Deposit on 2 sides of 300 Å on each side. 100 Å to 800 Å on demand. Width up to 2400 mm. « « Other polyester films (Mylar®, Melinex®, …) displaying certain characteristics (thermo-stability, coupling agent treatments, etc…) are also available. « Kapton® type CB, film polyimide chargé carbone, faible transmission de la lumière et faible réflectivité, épaisseur de 25 µm à 80 µm, largeur standard 1220 mm. Polyester film (PET), 0,6 µm to 480 µm thickness, 1220 mm standard width, available up to 1600 mm. TULLE TECHNIQUE TECHNICAL TULLE Base polyester (PET). En standard, agréé ESA, épaisseur 0,2 mm, masse surfacique 5 g/m2. 100% polyester monofilament. Possibilité méta-aramide (Nomex®, grammage et dimension selon cahier des charges). TEFLON ® Teflon® FEP type A, épaisseur de 12,5 µm à 500 µm, largeur standard 1220 mm et 1524 mm suivant épaisseurs. D’autres types de Teflon® FEP et PFA ayant des caractéristiques spécifiques sont disponibles. Teflon® Type A FEP, 12,5 µm to 500 µm thickness, 1220 mm and 1524 mm standard width according to thickness. Other types of Teflon® FEP and PFA displaying certain characteristics are also available. Possibilité de développement produit sur spécifications. Polyester base (PET). In a standard thickness of 0,2 mm, ESA qualified, with a surface mass area of 5 g/m2. 100% monofilament polyester. Possibilities with Meta-aramide products (Nomex®, basis weight and size according to the specifications requested). www.micel.fr Régis Lecarpentier Ingénieur technico-commercial - Développement produit Parc d’activités STELYTEC 42400 St CHAMOND Tél. +33 (0)4 77 29 39 43 Fax. +33 (0)4 77 29 39 48 e-mail : [email protected] Possibility of product development on request. Film polyimide KAPTON® brut et aluminisé sous vide Appellation commerciale Largeur std T° utilisation long terme T° utilisation extrême court terme mm °C °C UL 746B données fabricant de -269 à 400 Unité Normes KAPTON® 30 HN / 7,5 µm / brut KAPALU 30 HN / 7,5 µm / alu 2 faces KAPTON® 50 HN / 12,5 µm / brut KAPTON® 100 HN / 25 µm / brut KAPALU 100 HN / 25 µm / alu 1 face KAPALU 100 HN / 25 µm / alu 2 faces KAPALU 100 HN / 25 µm / alu 1 face / gaufré KAPTON® 200 HN / 50 µm / brut KAPALU 200 HN / 50 µm / alu 1 face KAPALU 200 HN / 50 µm / alu 2 faces KAPTON® 300 HN / 75 µm / brut KAPTON® 500 HN / 125 µm / brut KAPALU 500 HN / 125 µm / alu 1 face KAPTON® 100 XC10E7 / 25 µm / brut KAPALU 100 XC10E7 / 25 µm / alu 1 face Commentaires autres configurations sur demande suivant épaisseur 200 à 220 1220 Tenue Point à la de fusion flamme Rendement Dépôt alu (pureté 99,5%) mini par face °C m2/kg Å UL 94 ASTM E 794 85 méthode REXOR VO sans données fabricant 92,8 92,8 55,7 27,9 27,9 27,9 27,9 13,9 13,9 13,9 9,2 5,5 5,5 27 27 autres lg sur demande 300 possibilité de 100 à 800 Å par face sur demande APPLICATIONS : Isolation thermique multi couche en association avec un tulle technique pour application spatiale (Multi Layer Insulation) Blindage électromagnétique Film polyester aluminisé sous vide Appellation commerciale Unité Largeur std T° utilisation long terme T° utilisation extrême mm °C °C UL 746B données fabricant 105 de -70 à +150 Normes POLALU / 6 µm / alu 1 face POLALU / 6 µm / alu 2 faces *(1) POLALU / 6 µm / alu 2 faces/gaufré POLALU / 12 µm / alu 1 face * POLALU / 12 µm / alu 2 faces POLALU / 23 µm / alu 1 face * POLALU / 23 µm / alu 2 faces POLALU / 36 µm / alu 1 face * POLALU / 36 µm / alu 2 faces POLALU / 50 µm / alu 1 face * POLALU / 50 µm / alu 2 faces POLALU / 75 µm / alu 1 face * POLALU / 75 µm / alu 2 faces POLALU / 96 µm / alu 1 face * POLALU / 96 µm / alu 2 faces Complexe POLALU / 23 µm alu 1 face + grille de verre + POLALU / 23 µm alu 1 face Commentaires * produit tenu en stock 1220 1220 1220 1185 1185 1035 1035 1010 1010 985 985 1300 1300 1300 1300 Tenue Point à la de fusion flamme Rendement Dépôt alu (pureté 99,5%) mini par face °C m2/kg Å UL 94 ASTM D3418-82 méthode REXOR VTM 2 255 données fabricant 119 119 119 59,7 59,7 31 31 19,9 19,9 14,3 14,3 9,5 9,5 7,4 7,4 1035 300 non disponible autres lg sur demande littérature technique disponible sur demande APPLICATIONS : Isolation thermique multi couche en association avec un tulle technique pour application cryogénique (Multi Layer Insulation) (1) Isolation thermique multi couche en association avec un tulle technique pour application spatiale (Multi Layer Insulation) Blindage électromagnétique Tulle technique Appellation commerciale Unité Epaisseur Tenue T° en continu mm 2 g/m mm °C 1550 1450 1500 1550 5 13 28 200 0,2 150 0,35 220 220 Largeur std Masse surfacique Matière Normes ESPACEUR 93519 (agréé ESA) ESPACEUR 91053 ESPACEUR 91019 ESPACEUR 92187 Commentaires produit pouvant être fabriqué sur mesure littérature technique disponible sur demande APPLICATIONS : Espaceur pour matelas d’isolation multi couche réalisés avec des films polyester et KAPTON® (Multi Layer Insulation) Polyester Polyamide NOMEX® NOMEX® KAPTON® polyimide film, crude and aluminized by vacuum Commercial product name Standard Temp, longterm width use mm Unit of Measure Specification KAPTON® 30 HN / 7,5 µm / crude KAPALU 30 HN / 7,5 µm / alum. on 2 sides KAPTON® 50 HN / 12,5 µm / crude KAPTON® 100 HN / 25 µm / crude KAPALU 100 HN / 25 µm / alum. on 1 side KAPALU 100 HN / 25 µm / alum. on 2 sides KAPALU 100 HN / 25 µm / alum. on 1 side/ embossed KAPTON® 200 HN / 50 µm / crude KAPALU 200 HN / 50 µm / alum. on 1 side KAPALU 200 HN / 50 µm / alum. on 2 sides KAPTON® 300 HN / 75 µm / crude KAPTON® 500 HN / 125 µm / crude KAPALU 500 HN / 125 µm / alum. on 1 side KAPTON® 100 XC10E7 / 25 µm / crude KAPALU 100 XC10E7 / 25 µm / alum. on 1 side Comments other configurations on request 1220 Temp, short Flame term retardant intense use Melting point Output Alum. deposit (99,5% purity) mini, per side °C m2/kg Å Manufacturer’s data 92,8 92,8 55,7 27,9 27,9 27,9 27,9 13,9 13,9 13,9 9,2 5,5 5,5 27 27 REXOR metthod °C °C UL 746B Manufacturer’s data UL 94 ASTM E 794 85 from -269 à 400 VO without 200 à 220 according to thickness other widths on request 300 possibility of 100 to 800 Å per side on request APPLICATIONS : Multi Layer Thermal insulation in conjunction with a technical tulle for spatial application (MLI) Electromagnetic shielding Polyester films, aluminized by vacuum Commercial product name Standard Temp, longterm width use mm Unit of Measure Specification POLALU / 6 µm / alum. on 1 side POLALU / 6 µm / alum. on 2 sides*(1) POLALU / 6 µm / alum. on 2 sides/embossed POLALU / 12 µm / alum. on 1 side * POLALU / 12 µm / alum. on 2 sides POLALU / 23 µm / alum. on 1 side * POLALU / 23 µm / alum. on 2 sides POLALU / 36 µm / alum. on 1 side * POLALU / 36 µm / alum. on 2 sides POLALU / 50 µm / alum. on 1 side * POLALU / 50 µm / alum. on 2 sides POLALU / 75 µm / alum. on 1 side * POLALU / 75 µm / alum. on 2 sides POLALU / 96 µm / alum. on 1 side * POLALU / 96 µm / alum. on 2 sides Complexe POLALU / 23 µm alum. on 1 side + glass grid + POLALU / 23 µm alum. on 1 side Comments * products kept in stock 1220 1220 1220 1185 1185 1035 1035 1010 1010 985 985 1300 1300 1300 1300 Temp, short Flame term retardant intense use Melting point Output °C m2/kg Å Manufacturer’s data 119 119 119 59,7 59,7 31 31 19,9 19,9 14,3 14,3 9,5 9,5 7,4 7,4 REXOR metthod °C °C UL 746B Manufacturer’s data UL 94 ASTM D3418-82 105 from -70 à +150 VTM 2 255 1035 Alum. deposit (99,5% purity) mini, per side 300 unavailable other widths on request technical literature available on request APPLICATIONS : Multi Layer thermal insulation in conjunction with a technical tulle for cryogenic application (MLI) (1) Multi Layer thermal insulation in conjunction with a technical tulle for spatial application (MLI) Electromagnetic shielding Technical Tulle Commercial product name Unit of Measure Standard width Surface area Thickness Continuous temp, resistance mm 2 g/m mm °C 1550 1450 1500 1550 5 13 28 200 0,2 150 0,35 220 220 Material Specification ESPACEUR 93519 (agreed by ESA) ESPACEUR 91053 ESPACEUR 91019 ESPACEUR 92187 Comments product can be made to measure technical literature available on request APPLICATIONS : Spacer for Multi Layer insulation mattresses, made with polyester films and Kapton® (MLI) Polyester Polyamide NOMEX® NOMEX®