constat de verification
Transcription
constat de verification
1/ 2 CONSTAT DE VERIFICATION CHECKING REPORT N°MVP1000043 Délivré à : Issued for : KIMO SA Zone Industrielle B.P. 16 24700 MONTPON INSTRUMENT VERIFIE CHECKED INSTRUMENT Désignation : Designation : Appareil multifonction DIAM-P Multifunction instrument DIAM-P Constructeur : Manufacturer : Kimo Type : DIAM Type : N° de série : 1005XXXX Serial number Ce certificat comprend The certificat includes N° Inventaire : Inventory number : 2 page(s). La reproduction de ce certificat n'est autorisée que sous la forme de Fac Similé Photographique Integral. This certificate may not be reproduced other than in full by photographic process. Date : 02 Juin 2010 Le responsable laboratoire Laboratories manager Sébastien COUPEAU Ce document est en tout point conforme à la norme FDX 07-011 This document is complying standard NFX 07-011 Constat de vérification N°MVP1000043 2/2 VERIFICATION EN PRESSION PRESSURE CHECKING 1- Caractéristiques de l'appareil : Instrument features : Désignation : Appareil multifonction DIAM-P Description : Multifunction instrument DIAM-P Avec entrée de pression sur module interchangeable With pressure interchangeable measurement module N° série sonde / Probe S.N. : 1005xxxx N° inventaire sonde / Probe I.N. : Echelle : Résolution : 0,1 mm H2O -1000 à 1000 mm H2O Range : Resolution : 2- Méthode de vérification : Checking principle : Les points d'étalonnage sont réalisés par comparaison avec les moyens suivants: - MP002 Banc de génération de pression dynamique, plage d'utilisation de 0 à 2 Bar, - ETP 050 étalon n°:50.00.000, certificat d'étalonnage n°EEP0900014, contrôlé(s) avec la référence ETP 030 n°:17402G40/001705787, raccordement COFRAC n°P0909488A et l'étalon ETP 031 n°:17402G40/010604006, raccordement COFRAC n°P0908298A et l'étalon ETP 045 n°:96120309A, raccordement COFRAC n°P0909498A. The points of calibration are realized with means of calibration according to: - MP002 Bench generator dynamic pressure, measuring range 0 to 2 Bar, - ETP 050 a standard sn°:50.00.000, calibration certificate n°EEP0900014, controlled with standard ETP 030 sn°:17402G40/001705787, traceable by COFRAC n°P0909488A and typeETP 031 sn°:17402G40/010604006, traceable by COFRAC n°P0908298A and typeETP 045 sn°:96120309A, traceable by COFRAC n°P0909498A. 3- Conditions d'environnement : Environmental conditions : Température ambiante : 21.9 °C Ambient temperature: Humidité relative : 57.8 %HR Relative humidity : Pression atmosphérique : 1010 hPa Atmospheric pressure : 4- Conditions de vérification : Checking conditions : Tolérance appliquée à la vérification 0,2%mes+/-1 mm H2O de -1000 à 1000 mm H2O Calibrating accuracy : 5- Résultats de vérification : Checking results : Jugement / Appraisal : Les conditions d'acceptation de l'appareil sont basées selon les tolérances constructeur de la société KIMO. Le jugement est porté suivant le critère |Ecart| < |Tolérance|. Acceptance conditions of the instrument are based on tolerances of KIMO. Appraisal is done according to criteria |Difference| < |Tolerance| Appareil Conforme / Complying instrument Restrictions / Limitation : Commentaires / Comments : Prochaine date d'étalonnage en / Next recommended calibration date : 06/2011 Vérification effectuée par Checking performed by Vignes Delphine le 02/06/10