R-series - Verifone Support Portal

MagIC3 R-series
________________________________________________________________________________________________
Copyright Gemalto – 2007
Ce document ne peut être communiqué à des tiers sans autorisation écrite d'une personne habilitée de Gemalto.
This document shall not be disclosed to a third party without prior written consent of Gemalto.
1
TABLE OF CONTENTS
1. Technical Configuration.................................................................. 3
2. Design / Ergonomics ....................................................................... 3
3. MagIC3 x-series components .......................................................... 4
a.
b.
c.
d.
e.
f.
g.
h.
i.
Components characteristics ......................................................................................... 4
Communication Interfaces ........................................................................................... 4
Display......................................................................................................................... 4
Keyboard ..................................................................................................................... 5
Smart Card reader ....................................................................................................... 5
Magstripe reader.......................................................................................................... 5
SAM connectors........................................................................................................... 5
2nd Smart Card reader ................................................................................................ 5
Power Supply............................................................................................................... 6
4. MagIC3 R-series Security ................................................................ 6
a.
b.
c.
Tamper Responsive and Tamper Evident .................................................................... 6
Software Authentication ............................................................................................... 6
SSL v3: Servers and Terminal Mutual Authentication .................................................. 6
5. Peripherals....................................................................................... 6
a.
b.
c.
"USB Host" Port ........................................................................................................... 6
"USB Slave" Port ......................................................................................................... 6
RS 232 Port ................................................................................................................. 6
6. Local downloading tool................................................................... 7
7. Environment..................................................................................... 7
8. Evolution / Future ............................................................................ 7
________________________________________________________________________________________________
Copyright Gemalto – 2007
Ce document ne peut être communiqué à des tiers sans autorisation écrite d'une personne habilitée de Gemalto.
This document shall not be disclosed to a third party without prior written consent of Gemalto.
2
1. Technical Configuration
MagIC3 R-5
Features
Dimensions
Weight
Microprocessor
Security processor
Memory
Display
Type:
Resolution:
Keyboard
Smart Card reader
2nd Smart Card reader
Magstripe reader
Ethernet
Peripherals
Accessible SAM readers
Power
IN:
OUT:
Battery
LITHIUM Battery
MagIC3 R-8
- Length:
195 mm
- Width
93 mm
- Height
78 mm
400 g
32 bits ARM 9 200 MHz MMU
Dedicated 32 bits ARM
24 Mbytes
- 8 Mb of Flash
- 16 Mb of SRAM
Graphical, Back lighted
128x64 pixels
Icons bar
- PCI Secured, EBS 100 v3 compliant
- 18 keys (including 3 function keys)
- Back lighted
1 (EMV 4.1)
Optional: 1 (EMV 4.1)
Bi-directional
1 (ISO 1&2) – Optional: ISO 2/3 or ISO 1/2/3
ISO standard 7810,7811,7812,7813
Not Available
10/100 base-T
1 Simple RS232 (Rx, Tx, Ground)
1 Simple RS232 (Rx, Tx, Ground)
1 USB Host
2 USB Host
1 USB Slave
4 readers (reduced to 3, if 2nd smart card reader is present)
Security
Buzzer
AC 100-240 volts, 50/60 Hz
7Vdc, 3A
SRAM memory backup
PCI PED
Present
2. Design / Ergonomics
Thanks to its design and ergonomics, MagIC3 R-series integration is facilitated into any kind
of point of sale.
On the back of the MagIC3 R-series casing are located the connectors:
- USB Host (1 on MagIC3 R-5 and 2 on MagIC3 R-8)
- USB Slave (Only on MagIC3 R-8)
- 1 x RS 232 port.
- 1 x Ethernet connector (Only on MagIC3 R-8)
- Power supply plug
________________________________________________________________________________________________
Copyright Gemalto – 2007
Ce document ne peut être communiqué à des tiers sans autorisation écrite d'une personne habilitée de Gemalto.
This document shall not be disclosed to a third party without prior written consent of Gemalto.
3
3. MagIC3 R-series components
a. Components characteristics
The central processing unit is based on a microprocessor ARM 9 (Full 32 bits architecture),
clocked at 200 MHz and a secure 32 bits microprocessor performing algorithms functions and
keys storage.
Main characteristics:
Multitask Operating System - Linux
Operating System and applications are located in the resident memory (FLASH
EPROM).
FLASH EPROM technology allows Operating System reloading, without having to open
the terminal, especially for the downloading.
b. Communication Interfaces
MagIC3 R-8 terminals benefit from an Ethernet 10/100 base T port.
•
Ethernet 10/100 base T port allows MagIC3 R-8 to be used in a Local Area Network or be
connected to Internet (ADSL).
MagIC3 R-series terminals integrate TCP/IP protocol in standard, and SSL v3 for an
enhanced security over public networks.
c. Display
It is a LCD backlighted display of 128 x 64 pixels (excluding the icon bar). The backlight is
performed thanks to a LED network with a uniform level of lighting (instead of a lateral
lighting).
In standard, the display is used by software managing 4 lines of 16 characters to give the
best visibility to the final user.
The display contrast is configurable from the MENU.
The icon bar has been designed to allow a navigation similar to Mobile Phone. It includes
systems information allowing merchants or technical assistance to perform easily & quickly a
first diagnostic of the terminal status (Pinpad connected, Ethernet network status, PSTN
communication in progress, USB peripheral connected, Under Processing…).
________________________________________________________________________________________________
Copyright Gemalto – 2007
Ce document ne peut être communiqué à des tiers sans autorisation écrite d'une personne habilitée de Gemalto.
This document shall not be disclosed to a third party without prior written consent of Gemalto.
4
d. Keyboard
Characteristics:
Main keyboard with 15 alphanumerical keys and 3 functional keys (Validate, Modify,
Cancel).
Complementary keyboard including 3 injected keys indelible to activate the menu and
scroll the different options on the display.
Liquid and dust proof
Confidential code encrypting in compliance with PCI PED norm.
Optional: Master Key Session (algorithm DUKPT).
Keys marking are conceived to resist to abrasion and wear during the product life. Keyboards
are protected against splash, in order to protect internal electronic components.
MagIC3 R-series keyboards are conform to the European norm EBS 100 v3.
e. Smart Card reader
The smart card reader manages ISO position and is ISO 7816 -1-2-3-4 norms compliant.
It also manages smart cards with asynchronous interface (B0’, EMV), and synchronous
interface (EE2K, EE4K, T2G, EUROCHIP, etc...) of 3 & 5 volts.
f. Magstripe reader
The magstripe reader can read any types of magstripe cards conform to the ISO norm and
ANSI X 4.16 norm.
The standard configuration reads ISO 1/2 magstripe (ISO 2&3 and 1&2&3 in option).
The card reading is bidirectional.
The length of the swipe guide is important for a better position and stability of the card while
swiping, to obtain a good reading quality.
g. SAM connectors
MagIC3 R-series terminals support up to 4 accessible SIM readers (small size).
The SIM readers accept T=0 and T=1 protocols and can be interfaced only with
asynchronous cards.
Note: If a second smart card reader is required, the number of accessible SAM readers is
reduced to 3.
h. 2nd Smart Card reader
MagIC3 R-series terminals can be equipped with a second smart card reader as an option,
located under the 1st smart card reader of the terminal
________________________________________________________________________________________________
Copyright Gemalto – 2007
Ce document ne peut être communiqué à des tiers sans autorisation écrite d'une personne habilitée de Gemalto.
This document shall not be disclosed to a third party without prior written consent of Gemalto.
5
i.
Power Supply
MagIC3 R-series power supplies deliver 7 VDC and 3 A.
4. MagIC3 R-series Security
a. Tamper Responsive and Tamper Evident
The MagIC3 R-series terminals are « tamper responsive ». This solution enables maximum
security.
In case of fraud tentative, the MagIC3 R-series terminal erases all sensible data (keys) and
prevent from any other transaction.
b. Software Authentication
The MagIC3 R-series terminals, in standard, integrates software authentication feature. This
security prevent from non-approved software to be loaded on the terminal.
This security is implemented during the manufacturing of the terminal enabling security to be
kept at maximum level during the terminal’s transport.
c. SSL v3: Servers and Terminal Mutual Authentication
The SSL v3 feature available on MagIC3 R-series reinforces the security of data exchange
with the servers.
The encrypted exchanges and the mutual authentication (server – terminal) warrant data
integrity but also the origin of the exchange.
5. Peripherals
MagIC3 R-series terminals includes different communication means to allow easy integration
into any kind of environment.
a. "USB Host" Port
MagIC3 R-5 and MagIC3R-8 respectively integrate 1 and 2 USB Host ports allowing to pilot
different peripherals.
Adding of a new peripherals on MagIC3 R-series terminals is simple, the pilots can be easily
installed thanks to the Linux Operating System.
The USB port can also be used to locally load software onto the terminal. 1 Mb software can
be downloaded almost immediately.
b. "USB Slave" Port
MagIC3 R-8 includes one USB Slave port enabling the terminal to be used as a peripheral
(the master is the Electronic Cash Register or the PC, …).
c. RS 232 Port
MagIC3 R-series include also one RS-232 port (115kbps) to continue to use existing
peripherals such as cash registers, external modems, …
________________________________________________________________________________________________
Copyright Gemalto – 2007
Ce document ne peut être communiqué à des tiers sans autorisation écrite d'une personne habilitée de Gemalto.
This document shall not be disclosed to a third party without prior written consent of Gemalto.
6
6. Local downloading tool
Local software downloading tools on MagIC3 R-series terminals is simply performed using a
USB key or a USB cable connected to a PC.
The complete loading of software configuration is done in several seconds.
Any USB key can be used. Security is managed with authentication mechanism. The
application to be downloaded is encrypted and authenticated by the terminal’s key before
downloading is accepted.
7. Environment
MagIC3 R-series terminals are entirely conform to European environmental norms such as
RoHS (Risk of Hazardous Substances).
8. Evolution / Future
MagIC3 R-series has been designed to be easily adapted and pioneer technological
evolutions.
Thanks to its Linux platform and the numerous USB ports, it becomes easy to install new
peripherals such as check readers, new ECR and be future-proof…
________________________________________________________________________________________________
Copyright Gemalto – 2007
Ce document ne peut être communiqué à des tiers sans autorisation écrite d'une personne habilitée de Gemalto.
This document shall not be disclosed to a third party without prior written consent of Gemalto.
7