Programming a new Remote
Transcription
Programming a new Remote
Programming a new Remote To add a remote on an Astrostart Remote Car Starter, follow these steps. • Open the hood [Ouvrir le capot] • Turn the Key to the ON position [Mettre la clé à la position ON] • Push and Release the Brake Pedal [Appuyer et Relâcher la pédale de freins] • Cycle the Ignition OFF - ON – OFF – ON – OFF. Warning! At the end the key should end at OFF. The parking light will blink 4 times if done successfully. [Tourner la clé OFF - ON – OFF – ON – OFF en prenant soins de terminer à OFF. Les feux de stationnements clignoteront 4 fois] • Push any button of the remote to learn, parking lights will flash 1 time. Repeat for all remotes needed to be learned. [Maintenir appuyé un des boutons de la télécommande. Les feux de stationnement clignoteront 1 fois. Répéter cette étape pour toutes les télécommandes] • Push the brake pedal once [Appuyer et relâcher les freins] End of programming 9/8/2009