AR System 7.5 installation issue... Posted by Vincent RIEDWEG on

Subject: AR System 7.5 installation issue...
Posted by Vincent RIEDWEG on Wed, 10 Feb 2010 16:22:33 GMT
View Forum Message <> Reply to Message
**
Hi list,
I am facing a strange installation issue.
Let me to tell this story :
*
We are using AIX 5.3 with a remote Oracle 10.2.0.4 database.
*
The tnsnames.ora file is configured according to the
SW00316551 workaround.
*
The database connection with sqlplus is OK.
*
All the prerequisites are verified and OK.
*
The database is a database that comes from an AR System 6.3.
No AR System server installed on the server.
*
The AR System installer connects to the database correctly and
proposes the upgrade option.
*
To upgrade the data dictionary from 6.3 to 7.5, the arupora
utility is called by the installer.
*
I can find the following error in the arupora log file
(arsql.log) ORA-12154: TNS:could not resolve the connect identifier
specified.
*
I have tried with or without setting the TWO_TASK and the
result is the same.
*
There is no other error in all the log files except duplicates
of this error in different log files.
I have tried many configurations and the result is always the same.
Page 1 of 6 ---- Generated from
MattReinfeldt.com
All idea is welcome.
Regards,
Vincent RIEDWEG.
Ce message, ainsi que les pieces jointes, sont etablis, sous la seule
responsabilite de l'expediteur, a l'intention exclusive de ses
destinataires ; ils peuvent contenir des informations confidentielles.
Toute publication, utilisation ou diffusion doit etre autorisee
prealablement. Tout message electronique est susceptible d'alteration et
son integrite ne peut etre assuree. Le groupe ARTESYS decline toute
responsabilite au titre de ce message s'il a ete modifie ou falsifie.
This message and any attachments are exclusively intended for the
addressees, under the sole responsibility of the sender. They can
contain confidential information. Any disclosure, distribution or use
are forbidden without prior approval. Any E-mail can be altered and its
integrity cannot be guaranteed. ARTESYS Group will not be liable for the
message if it has been changed or falsified.
Merci de
n'imprimer ce message que si cela est reellement necessaire.
Please consider your environmental responsibility before printing this
email.
_Platinum Sponsor: [email protected] ARSlist: "Where the Answers
Are"_
Subject: Re: AR System 7.5 installation issue...
Posted by frederick w grooms67 on Wed, 10 Feb 2010 17:03:13 GMT
View Forum Message <> Reply to Message
You say the database connection with sqlplus is OK. How did you test
Page 2 of 6 ---- Generated from
MattReinfeldt.com
the connection? When you supplied the login did you use the @ method to
specify a database? My preferred method is to set the TWO_TASK and
ORACLE_SID environment variables so sqlplus just needs a login and
password.
export TWO_TASK=(the name of the entry in your tnsnames.ora file)
export ORACLE_SID=(the SID or Service Name of your Oracle instance)
sqlplus aradmin/password
Also make sure you are using the installer for patch 3
Fred
-----Original Message----From: Action Request System discussion list(ARSList)
[mailto:[email protected]] On Behalf Of Vincent Riedweg
Sent: Wednesday, February 10, 2010 10:23 AM
To: [email protected]
Subject: AR System 7.5 installation issue...
**
Hi list,
I am facing a strange installation issue.
Let me to tell this story :
* We are using AIX 5.3 with a remote Oracle 10.2.0.4 database.
* The tnsnames.ora file is configured according to the SW00316551
workaround.
* The database connection with sqlplus is OK.
* All the prerequisites are verified and OK.
* The database is a database that comes from an AR System 6.3. No AR
System server installed on the server.
* The AR System installer connects to the database correctly and
proposes the upgrade option.
* To upgrade the data dictionary from 6.3 to 7.5, the arupora utility is
called by the installer.
* I can find the following error in the arupora log file (arsql.log)
ORA-12154: TNS:could not resolve the connect identifier specified.
* I have tried with or without setting the TWO_TASK and the result is
the same.
* There is no other error in all the log files except duplicates of this
error in different log files.
I have tried many configurations and the result is always the same.
All idea is welcome...
Page 3 of 6 ---- Generated from
MattReinfeldt.com
Regards,
Vincent RIEDWEG.
____________________________________________________________ ____________
_______
UNSUBSCRIBE or access ARSlist Archives at www.arslist.org
Platinum Sponsor:[email protected] ARSlist: "Where the Answers
Are"
Subject: Re: AR System 7.5 installation issue...
Posted by Vincent RIEDWEG on Mon, 22 Feb 2010 11:12:12 GMT
View Forum Message <> Reply to Message
**
Hi,
After using the AR System 7.5 patch 4 installer instead of the patch 3
installer, the installation was successful.
Thanks.
Vincent.
-----Original Message----From: Action Request System discussion list(ARSList)
[ mailto:[email protected]] On Behalf Of
Grooms, Frederick W
Sent: Wed, 10 Feb 2010 09:03:38 -0800
To: [email protected]
Subject: Re: AR System 7.5 installation issue...
**
You say the database connection with sqlplus is OK. How did you test
the
connection? When you supplied the login did you use the @ method to
specify a
database? My preferred method is to set the TWO_TASK and ORACLE_SID
environment variables so sqlplus just needs a login and password.
export TWO_TASK=(the name of the entry in your tnsnames.ora file)
export ORACLE_SID=(the SID or Service Name of your Oracle instance)
sqlplus aradmin/password
Also make sure you are using the installer for patch 3
Page 4 of 6 ---- Generated from
MattReinfeldt.com
Fred
-----Original Message----From: Action Request System discussion list(ARSList)
[ mailto:[email protected]] On Behalf Of
Vincent Riedweg
Sent: Wednesday, February 10, 2010 10:23 AM
To: [email protected]
Subject: AR System 7.5 installation issue...
**
Hi list,
I am facing a strange installation issue.
Let me to tell this story :
* We are using AIX 5.3 with a remote Oracle 10.2.0.4 database.
* The tnsnames.ora file is configured according to the SW00316551
workaround.
* The database connection with sqlplus is OK.
* All the prerequisites are verified and OK.
* The database is a database that comes from an AR System 6.3. No AR
System
server installed on the server.
* The AR System installer connects to the database correctly and
proposes the
upgrade option.
* To upgrade the data dictionary from 6.3 to 7.5, the arupora utility is
called
by the installer.
* I can find the following error in the arupora log file (arsql.log)
ORA-12154:
TNS:could not resolve the connect identifier specified.
* I have tried with or without setting the TWO_TASK and the result is
the same.
* There is no other error in all the log files except duplicates of this
error
in different log files.
I have tried many configurations and the result is always the same.
All idea is welcome...
Regards,
Vincent RIEDWEG.
Ce message, ainsi que les pieces jointes, sont etablis, sous la seule
responsabilite de l'expediteur, a l'intention exclusive de ses
Page 5 of 6 ---- Generated from
MattReinfeldt.com
destinataires ; ils peuvent contenir des informations confidentielles.
Toute publication, utilisation ou diffusion doit etre autorisee
prealablement. Tout message electronique est susceptible d'alteration et
son integrite ne peut etre assuree. Le groupe ARTESYS decline toute
responsabilite au titre de ce message s'il a ete modifie ou falsifie.
This message and any attachments are exclusively intended for the
addressees, under the sole responsibility of the sender. They can
contain confidential information. Any disclosure, distribution or use
are forbidden without prior approval. Any E-mail can be altered and its
integrity cannot be guaranteed. ARTESYS Group will not be liable for the
message if it has been changed or falsified.
Merci de
n'imprimer ce message que si cela est reellement necessaire.
Please consider your environmental responsibility before printing this
email.
_Platinum Sponsor: [email protected] ARSlist: "Where the Answers
Are"_
File Attachments
1) image001.png, downloaded 7 times
Page 6 of 6 ---- Generated from
MattReinfeldt.com