DRC-10-A - Nordic Drill
Transcription
DRC-10-A - Nordic Drill
NORDIC DRILL DRC-10-A LA FOREUSE TOUT-EN-UN THE ALL IN ONE DRILLING RIG DOUBLE ROTATION CHENILLE JUSQU’À 10 POUCES GLISSAGE À ANGLE DUAL ROTARY CRAWLER UP TO 10 INCHES ANGLE SLIDE 390 Ste-Hélène, St-Samuel Québec Canada G0Z 1G0 (819) 758-6468 [email protected] AVANTAGES DE LA DRC-10-A EN COMPARAISON À UNE FOREUSE « ROTARY » CONVENTIONNELLE ADVANTAGES OF THE DRC-10-A COMPARED TO A CONVENTIONAL AIR ROTARY DRILL DOUBLE ROTATION DUAL ROTATION Précision en mort-terrain Accuracy in overburden Meilleur performance en mort-terrain difficile Better performance in tough overburden conditions Permet un bon échantillonnage Allows good sampling 12814mm 504” Permet l’installation de crépine Allows screen intallations Facilite le retrait du tubage Facilitates the extraction of the casing 7912mm 311” Facile d’opération Easy operations Offre une propreté en chantier Allows cleanliness on sites SÉCURITÉ SAFETY Offre des méthodes de forage sécuritaires Offers safe drilling methods Munie d’un système d’Anti-Rotation Provided of an Anti-Rotation system 3172mm 125” 8080mm 318” CHENILLE CRAWLER 2855mm 112” Facilite la mise en chantier sur terrains à accès difficiles Facilitates set-up on difficult access sites 2210mm 87” Endommage moins les sites de forage Less damage on drilling sites 5663mm 223” Nécessite moins de préparation des accès Needs less preparation to job sites Plus petit format Smaller rig Plus légère lighter rig 457mm 18 457mm 18” 2541mm 100” ANGLE ANGLE Utile au forage spécialisé Useful for specialized drilling applications Utile aux applications minières Useful for mining applications Permet le forage à circulation inversée Allows Reverce circulation drilling 4890mm 193” 90° 1888mm 74” Permet le forage pour encrage Allows drilling for anchors Permet le forage pour pieux Allows piles drilling 526mm 21” DRC-10-A Métrique English Course / stroke 4,9 m 16 ft Levage / hoist 14061 Kg. 31000 lbs 16,15 m./min. 53 pi./min. 10660 Kg. 23500 lbs 21,65 m./min. 71 pi./min. Torque / torque 8130 Nm 6000 ft x pds Vitesse de rotation / rotation spped 0 - 90 RPM 0 - 90 RPM Course / stroke 3,1 m 10 ft Levage / hoist 18575 Kg. 35000 lbs 14,3 m./min. 47 pi./min. 12000 Kg. 26500 lbs 19,2 m./min. 63 pi./min. Torque / torque 29150 Nm 21500 ft x pds Vitesse de rotation / rotation spped 0 - 9 RPM 0 - 9 RPM Ouverture maximum / maximum opening 30,5 cm 12 inches Cat.C 6.6 (210 hp) Cat.C 6.6 (210 hp) 91,4 cm. 36 po. Hydraulique 225 Amp Hydraulic 225 Amp Quad Bean 68 lpm Quad Bean 18 gpm Tête de forage / Top drive Vitesse de levage / hoist speed Descente / pull down Vitesse de descente / Pull down speed Table d’entrainement / Lower drive Vitesse de levage / hoist speed Descente / pull down Vitesse de descente / Pull down speed Autres caractéristiques / other caracteristics Moteur / engine Course glissade du mat / slidind mast stroke Soudeuse / welding machine Pompe à eau / water pump 98,5 lts, 124 bars- 26 gpm, 1800 psi - 49 lts, 199 bars 13 gpm, 2900 psi 910 Kg. 2000 pds M12 5455 Kg. M12 12000 pds Cuve à tige / Pipe tub 40 tiges de 8,9 cm 40 pipes of 3½ inches Sécurité / Safety Anti-Rotation tête Anti-rotation top drive 5 Km/hrs 3,1 M/hrs 14545 Kg. approx. 32000 pds approx. Pompe hydrofrac / Hydrofrac pump Treuil de levage / service winch Treuil frontal / front winch Vitesse maximale / maximum speed Poids/Weight 390 Ste-Hélène, St-Samuel Québec Canada G0Z 1G0 (819) 758-6468 [email protected]