Sans nom-1

FABRICATION SUR MESURES
SIGNALISATION & MARQUAGE
APTETUDE - Sarl au capital de 100 000 €uros - RCS BORDEA UX 442 310 959 00014 - APE 7311Z - N° T.V.A. FR 49442310959
MAGNETIC DRY ERASE OR ALCOHOL
BASED ERASABLE WHITEBOARDS
For indoor and outdoor use - any type of markers
CUSTOMIZED MANUFACTURING ALL SIZES
Maximum size : 4.00m x 2.00m (a single sheet)
MULTI-COATED MAGNETIC WHITEBOARD
1 Up-market Polyester protection
2 Four-colour impression process or white
vinyl
3 Ferrous material (to attract magnets)
4 Dibond support (3mm light stiff panel)
Lamination and multiple collage of materials for the making of a magnetic or non magnetic erasable whiteboard
1
Up-market Polyester protection - accepts all types of markers on the market.
Resists abrasion, U.V. rays, solvents and hydrocarbons.
Every type of markers can be used : permanent or dry erasable ( LUMOCOLOR et VELLEDA )
The surface can be cleaned with alcohol, acetone or soapy water.
2
Digital four-colour impression process on pro vinyl adhesive or neutral glossy white polymer.
High definition impression in four-colour process from your computing files. Boards, planning board, maps, plan of site...
We make models and Pass for Press before launching manufacturing.
3
Ferrous material - Ferrous rubber film, acrylic glue.
Flexible material rich in ferrous particles than can replace a metal sheet which would be much heavier.
4
3mm thick stiff panel made up of 2 0.3mm aluminium coats and of a polyethylene core.
Very beautiful flat surface - light and stiff material, easy to handle and to put in.
OPTIONS
Finishing frame : metal girdle with white plastic cover and finishing angles.
For large-sized boards : rear reinforcements.
Fixed legs or on castors, hinged side panels, industrial aluminium profile frame.
Feasibility study according to sizes and quantities.
FIXATION
Screws and rawlplugs provided - The type of screws depends on the nature of the wall and on the drillings.
CARE INSTRUCTIONS
Cleaning with alcohol, F gasoline or soapy water. Do not use abrasive sponges.
FABRICATION SUR MESURES
SIGNALISATION & MARQUAGE
APTETUDE - Sarl au capital de 100 000 €uros - RCS BORDEA UX 442 310 959 00014 - APE 7311Z - N° T.V.A. FR 49442310959
MAGNETIC DRY ERASE OR ALCOHOL-BASED ERASABLE WHITEBOARDS
CUSTOMIZED MANUFACTURING ALL SIZES
Wall fixing - Hinged side panels - Fixed legs or on castors
Finishing frame : metal girdle with white plastic cover and finishing angles.
For large-sized boards : rear reinforcements.
Fixed legs or on castors, hinged side panels, industrial aluminium profile frame.
Feasibility study according to sizes and quantities.
FABRICATION SUR MESURES
SIGNALISATION & MARQUAGE
APTETUDE - Sarl au capital de 100 000 €uros - RCS BORDEA UX 442 310 959 00014 - APE 7311Z - N° T.V.A. FR 49442310959
MAGNETIC DRY ERASE OR ALCOHOL-BASED ERASABLE WHITEBOARDS
CUSTOMIZED MANUFACTURING ALL SIZES - WHITE OR FOUR-COLOUR
Polyester protection of the surface before using any type of markers
Fixed legs or on castors - Hinged side panels
Steel legs : 30mm diam. white lacquered steel legs with adjustable and
autoblocking castors.
Fixation of the board by screwing with black plastic thumb wheel.
delivered in a ready to assemble kit : Assembly key provided.
LEG PROFILE ALU 30 : Silver grey anodized aluminium 30mm square profile (strong and light).
Our manufacturing accepts strong dynamic and static loads with high capacity junctions.
Boards assembled in our workshop - pallet delivery by carrier.
FEASIBILITY STUDY
2.00 x 1.50m
We conceive aluminium structure
according to your specifications.
Max-size : 4.0m x 2.0m in a single part
Fixed legs or on castors
Hinged side panels
ACCESSORIES :
Set of square edged pieces of trim, handles, castors,
reinforcements, plastic inserts (to hide screwholes),
hinges...