12-yy-2zz-nn-m-(Bb) 5:1
Transcription
12-yy-2zz-nn-m-(Bb) 5:1
A B C D E F G H Ce plan est la propriété exclusive de la société NICOMATIC. Il ne peut être reproduit sans son autorisation. Loi du 11.03.1902. This document and drawings, sketches, and schematic plans are the property of the NICOMATIC company. and no parts thereof may be reproduced and used without the written consent of the owner. Law dated 11.03.1902 C 4 nn x 0,635 4 +0,02 -0,03 4 2,54 Pas 2,54 mm ±0,10 1 +0 (nn x [Pas]) -1.2 0 M 0.1 3 2,54 2 Traitement étamé étamé étamé Doré selectif Doré selectif Doré selectif Doré Doré Doré Pas (mm) 2,54 5,08 7,62 2,54 5,08 7,62 2,54 5,08 7,62 A A B Traitement de Surface et pas M B 0 -0,10 Matière de l'isolant barrette Code m 1 9 b 0.3 [3 par défaut] Valeur A variable suivant longueur de broche avec une tolérance de 0.3 (nn - 1) x [Pas] Code zz 11 12 13 31 32 33 41 42 43 ±0,20 Pieds de lavage hauteur min 0.5 0.5 A B 2 0.5 C D D Matière Plastique polyester noir UL94V0. Plastique polyester haute température noir UL94V0. NOTA : Traitement de surface des broches : - étamé : Ni 2µ + Sn 5µ. - Doré selectif : Ni 2µ + Au <0.1µ (partie contact seulement). - Doré : Ni 2µ + Au <0.1µ. 12-yy-2zz-nn-m-(Bb) 3 CORRESPONDANCE CODE BARRETTE : * 12 : Barrette mâle coudée, simple rangée. Isolant h=2.54mm, largeur=2.54mm * yy : Longueur de broche (Voir tableau). * 2 : Contact coudé, simple isolant. * zz : Traitement de surface et pas entre broches (Voir tableau). 2 * nn : Nombre de points de la barrette 02 ≤ nn ≤ 40. * m : Matière de l'isolant barrette ( Voir tableau ). * b : Cote en mm ; précisée à la fin de la référence si différent de 3mm (Ex : -B5.1 ). Rep. Nb Reference 1 nn Isolant H2.54 2 nn Code yy Codes longueur de broches 1 Code yy Longueur (mm) Valeur A (mm) Code 09 8,2 0,5 Code 11 9,2 1,5 Code 13 10,2 2,5 Code 15 11,2 3,5 Code 17 12,4 4,7 Code 19 13,8 6,1 Code 21 14,5 6,8 Code 22 15,1 7,4 Code 24 16 8,3 Code 27 17 9,3 Code 28 17,7 10 H Code yy Longueur (mm) Valeur A (mm) Code 29 18 10,3 Code 30 18,6 10,9 Code 31 19,5 11,8 Code 33 22 14,3 Code 35 23,3 15,6 Code 36 25 17,3 Code 37 25,8 18,1 Code 38 26,3 18,6 Code 39 28,3 20,6 Code 40 29 21,3 Code 42 30,8 23,1 G Code yy Longueur (mm) Valeur A (mm) 23,8 Code 43 31,5 26,3 Code 44 34 28 Code 45 35,7 30,1 Code 48 37,8 31,3 Code 49 39 33,1 Code 50 40,8 34,8 Code 65 42,5 35,3 Code 66 43 Désignation Isolant barrette Broche carrée ZI Les Bracots F-74890 Bons-en-Chablais Tel. : +33 (0)4.50.36.13.85 Fax : +33 (0)4.50.36.11.33 Désignation : Barrette Mâle coudée Simple rangée Designation : 90° Male Header Single row Réf. Catalogue / Catalogue Reference 12-yy-2zz-nn-m(-Bb) Matiere Trait. de surface Voir Correspondance Code ''m'' Cu Zn 33 Voir Nota d 22/02/07 OM 07 022 + OM 07 034 J.R. c 03/10/06 OM 06 140 et 06 127 J.R. D.Z. b 22/08/03 OM 03 107+OM 03 121 J.R. D.Z. a 29/10/02 Edition originale S.G. Drawn Ind. Date Modification Checked Echelle/Scale Tolérance générale / D.Z. D.Z. J.L.C. E.L. Approved 1 General tolerance ±0.2 5:1 Repertoire / Folder X:\Méthodes\02 - Barrettes HE13-HE14\- Barrettes - Plans génériques\11 et 12-yy-2zz - coudée\ N° Plan / Drawing N°12-yy-2zz-nn-m B Page 1/2 A A3 A B C D E F G H Ce plan est la propriété exclusive de la société NICOMATIC. Il ne peut être reproduit sans son autorisation. Loi du 11.03.1902. This document and drawings, sketches, and schematic drawings are the property of the NICOMATIC company. and no parts thereof may be reproduced and used without the written consent of the owner. Law dated 11.03.1902 C 2 D 0.5 C D 4 nn x 0,635 +0,02 -0,03 4 4 2,54 ±0,20 1 ±0,10 Stand of heigth min. 0.5 0.5 A B Pitch 2,54 mm +0 (nn x [Pitch]) -1.2 0 (nn - 1) x [Pitch] M b 0.3 [3 by défault] Variable A value according to length of pin with a tolerance of 0.3 A A B 0.1 3 2,54 M B 12-yy-2zz-nn-m-(Bb) 0 -0,10 3 Code correspond : * 12 : 90° male header , simple row Insulator h=2.54mm width=2.54 * yy : Pin length (See table). Plating and pitch 2 zz Code 11 12 13 31 32 33 41 42 43 Plating Pitch (mm) Tin 2,54 Tin 5,08 Tin 7,62 Selectif gold 2,54 Selectif gold 5,08 Selectif gold 7,62 Gold 2,54 Gold 5,08 Gold 7,62 1 yy code Length (mm) Code 09 8,2 Code 11 9,2 Code 13 10,2 Code 15 11,2 Code 17 12,4 Code 19 13,8 Code 21 14,5 Code 22 15,1 Code 24 16 Code 27 17 Code 28 17,7 H Value A (mm) 0,5 1,5 2,5 3,5 4,7 6,1 6,8 7,4 8,3 9,3 10 Material of insulator m Code 1 9 Material Black polyester plastics UL94V0. Black high temperature polyester plastics UL94V0. * zz : Plating and pitch (See table). Value A (mm) 10,3 10,9 11,8 14,3 15,6 17,3 18,1 18,6 20,6 21,3 23,1 yy code Length (mm) Code 43 31,5 Code 44 34 Code 45 35,7 Code 48 37,8 Code 49 39 Code 50 40,8 Code 65 42,5 Code 66 43 2 * nn : Number of pin 02 ≤ nn ≤ 40. * m : Material of insulator (See table). NOTA : Pin plating : - Tin : Ni 2µ + Sn 5µ. - Selectif gold : Ni 2µ + Au <0.1µ (only mating area). - Gold : Ni 2µ + Au <0.1µ. Length code of pin yy code Length (mm) Code 29 18 Code 30 18,6 Code 31 19,5 Code 33 22 Code 35 23,3 Code 36 25 Code 37 25,8 Code 38 26,3 Code 39 28,3 Code 40 29 Code 42 30,8 G * 2 : 90° pin, insulator simple. * b : Dimension in mm; at the end of the reference specifial it's different from 3 (Ex : -B5.1 ). Rep. Nb Reference 1 nn Insulator H2,54 2 nn yy Code Value A (mm) 23,8 26,3 28 30,1 31,3 33,1 34,8 35,3 ZI Les Bracots F-74890 Bons-en-Chablais Tel. : +33 (0)4.50.36.13.85 Fax : +33 (0)4.50.36.11.33 Désignation : Barrette Mâle coudée Simple rangée Designation : 90° Male Header Single row Réf. Catalogue / Catalogue Reference 12-yy-2zz-nn-m(-Bb) Designation Insulator Square size pin Material See correspond "m" code Cu Zn 33 Plating See nota d 22/02/07 OM 07 022 + OM 07 034 J.R. c 03/10/06 OM 06 140 et 06 127 J.R. D.Z. b 22/08/03 OM 03 107+OM 03 121 J.R. D.Z. a 29/10/02 Edition originale S.G. Drawn Ind. Date Modification Checked Echelle/Scale Tolérance générale / D.Z. D.Z. J.L.C. E.L. Approved 1 General tolerance ±0.2 5:1 Repertoire / X:\Méthodes\02 - Barrettes HE13-HE14\- Barrettes - Plans génériques\11 et 12-yy-2zz - coudée\ Folder N° Plan / Drawing N° 12-yy-2zz-nn-m B Page 2/2 A A3