AVK VANNE À EMBOITEMENT PVC 01/85
Transcription
AVK VANNE À EMBOITEMENT PVC 01/85
AVK VANNE À EMBOITEMENT PVC 01/85 Vanne à emboîtement conçue suivant NF EN 1074-1 & 2, permettant le raccordement par emboîtement à une canalisation PVC. Sens de fermeture FAH ou FSH. Description du produit : Vanne à emboîtement PVC résistant à une température maximale de 70°C, conçue pour une utilisation eau potable et liquides non agressifs et peu chargés, eaux usées urbaines, refoulement et stations de traitement. Sens de fermeture FAH ou FSH Normes/Certifications : • Conçue suivant NF EN 1074-1 & 2, EN 1171 • Revêtement Époxy intérieur/extérieur suivant DIN 30677 section 2 et préconisations GSK • Étanchéité conforme à la catégorie A suivant norme ISO 5208-2 • Tous les matériaux en contact avec l’eau destinée à la consommation humaine sont certifiés conformes à l’arrêté du 29 mai 1997 • ACS Épreuves : • Épreuve hydraulique selon NF EN 1074-1 & 2 et EN 12266 : Siège : 1,1 x PN (PFA) et 0,5 bar ; Corps : 1,5 x PN (PFA) • Test du couple ouverture / fermeture Caractéristiques : • PFA 16 bar • DN 40 à 300 • Sens de fermeture FSH (pastille noire) ou FAH (pastille rouge) • Grande résistance à la corrosion, revêtement époxy 250 µm • Étanchéité de la tige en acier inoxydable assurée par 1 joint extérieur, 4 joints toriques de presse étoupe et 1 joint intérieur à lèvre en EPDM empêchant le dépôt de particules • Écrou d’opercule serti • Opercule en fonte ductile intégralement surmoulé de caoutchouc EPDM • Rails de guidage intégrés dans l’opercule et dans le corps de la vanne garantissant un coulissement uniforme indépendamment de la pression • Boulonnerie de chapeau constituée de vis 6 pans creux en acier inoxydable enduites de colle à sceller • Montage rapide grâce au système d’emboîtement Accessoires : • Allonge téléscopique série 04/215 • Allonge fixe série 04/4X • Cloche série 04/70 AVK France S.A.S. 4 rue de la Garbotière CS 2904 41029 Blois Cedex France Tél.: 02 54 74 23 13 E-mail : [email protected] www.avk.fr DROITS D'AUTEUR © AVK GROUP A/S 2011 / AVK France S.A.S. Version n° 370185CG AVK SOCKET VANNE ÀGATE EMBOITEMENT AVK VALVE, PN 16, CTC F1 F Three independent stem seals offering triple safety: • A NBR wiper ring protects against dirt from outside. • A polyamid bearing with 4 NBR O-rings protects against galvanic corrosion. • An EPDM rubber manchette sealing acts as the main hydraulic seal to the flow. 2 3 4 5 A B. Body/bonnet connection The unique assembly of the valve body and bonnet ensures a durable tightness: • A round rubber bonnet gasket fits into a recess in the valve bonnet preventing it from being blown out by pressure surges. • The stainless steel bonnet bolts are countersunk in the valve bonnet, encircled by the bonnet gasket and sealed with hot melt. Thus there is no risk of corrosion as the bolts are not exposed to the medium or soil. 6 7 H 8 B 9 10 C 003 A. Stem sealing 1 F2 01/85 01/80 11 C. Wedge nut The fixed, integral wedge nut reduces the number of movable valve parts thus minimizing the risk of corrosion and malfunction. The wedge nut is made of dezincification resistant brass with lubricating abilities providing optimum compatibility with the stainless steel stem. D Dd D H2 D. Vulcanized wedge The ductile iron core is fully vulcanized with drinking water approved EPDM rubber internally and externally. No iron parts are exposed to the medium and the excellent rubber vulcanization prevents creeping corrosion underneath the rubber. Guides in the wedge and on the valve body ensure a uniform closure regardless of high pressure. Safe operation is ensured, as the guides prevent overloading of the stem. The wedge has a large through bore and as there are no hollows in the core, stagnant water or impurities cannot collect and cause contamination. 12 L1 13 L Liste des composants Component list Stem 1 1.Tige Acier inoxydable X20Cr13 2. NBR wiper ring 2 3.Joint d’étanchéité extérieur Caoutchouc NBR NBR O-ring Plastictorique bearing de presse étoupe 3 4.Joint Caoutchouc NBR 5. Thrust collar 4 6. EPDM rubber manchette Plastique Bonnet 5 7.Palier Laiton haute résistance CZ 132 suivant BS 2872 8. Bonnet bolt 6 9.Joint à lèvres d’étanchéité interne Caoutchouc EPDM Bonnet gasket 7 10.Chapeau Fonte ductile EN GJS 500-7 suivant EN 1563, revêtement époxy int./ext. suivant DIN 30677 Wedge nut Wedge 8 11.Boulonnerie de chapeau Acier inoxydable A2 12. Body 9 13.Joint profilé de chapeau Caoutchouc EPDM "EURO" sealing ring 10 Écrou d’opercule Laiton haute résistance CZ 132 suivant BS 2874 11 Opercule Fonte ductile, revêtement caoutchouc EPDM 12 Corps nos. and dimensions Fonte ductile EN GJS 500-7 suivant EN 1563, revêtement époxy int./ext. suivant DIN 30677 Reference 13 Manchette d’emboîtement EURO Caoutchouc EPDM DN mm AVK ref. nos. Dd mm Prod. PN L mm L1 mm 01-050-80014 40 50 16 270 103 La01-063-80014 liste des composants50peut63être16remplacée 286 103 01-075-80014 65 75 16 298 108 01-090-80014 80 90 16 315 115 01-110-80014 100 110 16 338 118 01-125-80014 125 125 16 348 115 01-160-80014 150 160 16 400 130 01-200-80014 200 200 16 426 135 01-225-80014 200 225 16 452 151 01-250-80014 250 250 16 474 161 01-280-80014 250 280 16 504 166 01-315-80014 300 315 16 548 172 Dd L N° réf. AVK DN 400 01-400-80014 400 16 596 185 Références, n° et dimensions 01 050 85x16 01 063 85x16 01 075 85x16 01 090 85x16 01 110 85x16 01 125 85x16 01 160 85x16 01 200 85x16 01 225 85x16 01 250 85x16 01 280 85x16 01 315 85x16 01 400 85x16 40 50 65 80 100 125 150 200 200 250 250 300 400 mm mm 50 63 75 90 110 125 160 200 225 250 280 315 400 270 286 298 315 338 348 400 426 452 474 504 548 596 H mm H2 mm F mm F1 mm F2 mm Theoretical weight kg 236 44 14 17 29 7,0 par 241 des 52 composants 14 17 29 équivalents 8,0 271 58 17 20 34 9,0 297 68 17 20 34 13 334 79 19 22 38 18 375 87 19 22 38 24 448 107 19 22 38 40 562 130 24 28 42 56 562 142 24 28 42 58 664 157 27 31 47 80 664 174 27 31 47 95 740 193 H 27 31 47 L1 H2 123 F 950 240 32 37 55 246 ou de catégorie supérieure mm mm mm mm F1 mm 103 103 108 115 118 115 130 135 151 161 166 172 185 236 241 271 297 334 375 448 562 562 664 664 740 950 44 52 58 68 79 87 107 130 142 157 174 193 240 14 14 17 17 19 19 19 24 24 27 27 27 32 17 17 20 20 22 22 22 28 28 31 31 31 37 X = 0 sens de fermeture à droite FSH, 1 sens de fermeture à gauche FAH Se reporter à la section "informations techniques" pour toute information complémentaire. Les designs, matériaux et spécifications présentés peuvent être modifiés sans préavis en fonction des évolutions techniques. 14 F2 mm Poids théorique kg 29 29 34 34 38 38 38 42 42 47 47 47 55 7,0 8,0 9,0 13 18 24 40 56 58 80 95 123 246