samsung ml-4510/4512/6510/6512 mlt-307 drum

SAMSUNG ML-4510 • 4512 • 6510 • 6512 MLT-307 DRUM CHIP REPLACEMENT INSTRUCTIONS
SAMSUNG ML-4510/4512/6510/6512 MLT-307
DRUM CHIP REPLACEMENT INSTRUCTIONS
By Joe Cachia and the Technical Staff at UniNet
SOLDERING
POINT
MLT-307 DRUM CHIP CABLE CONNECTING GUIDE
1. After you cut off a cable from original chip, you should solder that wire in the red box area of above photo.
2. Check the number in the blue box. When you cutoff and solder the cable, you should match each wire to the same number.
MLT-307 drum chip (before soldering)
© 2013 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact [email protected]
www.uninetimaging.com
SAMSUNG ML-4510 • 4512 • 6510 • 6512 MLT-307 DRUM CHIP REPLACEMENT INSTRUCTIONS
Twisted
Finished MLT-D307 drum chip after soldering
© 2013 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact [email protected]
www.uninetimaging.com