Maintenance Optimisation: Equipment Identification Using Bar
Transcription
Maintenance Optimisation: Equipment Identification Using Bar
Maintenance Optimisation: Equipment Identification Using Bar Codes Vladimir Horalek, Transgas a.s. Vojtech Becka, Transgas a.s. SUMMARY The project’s objective is to translate the larger part of the technological procedures of equipment repairs and maintenance and scheduled inspections of equipment operation into an electronic form that can be implemented in mobile hand-held electronic terminals. The software application is being developed so as to permit the maximum use of the DMS system, which is being considered for these purposes. The operations proper that are involved in maintenance, repairs and inspections on site are carried out in co-operation with on-line connection to the Transgas central database. Once the whole project is completed and commissioned, the maintenance staff will transmit information to and from the maintenance and operation control sites using hand-held terminals. The project has been designed so as to permit communication with mySAP.com’s. Optimalisation d´entretien – identification de la technologie par code barre RESUME Le but de ce projet est la transformation de la plupart de processus technologiques de reparation, d´entretien et de contrôles de service technologique régulières dans une forme électronique avec une possibilité d´application au poste terminal électronique hand–held. L´application de logiciel est générée d´une manière qui rend possible une exploitation maximale du système DMS prévue. Les opérations, elles-mêmes qui se rattachent à l´entretien, aux réparations et aux contrôles de service par course sont effectuées en coopération avec la connexion en ligne à la banque de données centrale de Transgas. Après avoir mis en service, les travailleurs d´entretien vont transmettre le débit d´information de/au processus d´entretien et commander la marche par le poste terminal hand–held. La réalistion de ce projet rend la possibilité permanente d´introduire la communication avec mySAP.com-PM .