Poster 1

(Poster 1):
Concurrent multi-scale modeling using atomistic and dislocation dynamics: a
study of dislocation nucleation
Steffen Brinckmann
Max-Planck-Institut für Eisenforschung, Max-Planck-Straße 1, 40237 Düsseldorf, Germany
(Poster 2):
Size and strain effects on the chemical order and properties of FeRh
nanoalloys
Marion Castiella, Marie-José Casanove, Christophe Gatel, Jean François Bobo, Nicolas Bizière, Nicolas
Ratel
CNRS CEMES Toulouse, France
(Poster 3):
Atomistic and inverse-analytical modeling of elastic properties of coherent
nano-phases
L. Chen*, L.-F. Zhu*, M. Friák*,#, D. Ma*, C. P. Race^, V. S. P. K. Bhogireddy*, R. Spatschek*, B.
Svendsen*,#,&, D. Raabe* and J. Neugebauer*
* Max-Planck-Institut für Eisenforschung GmbH, Max-Planck-Str 1, D-40237 Duesseldorf, Germany
# Aachen Institute for Advanced Study in Computational Engineering Science
(AICES), RWTH Aachen University, Schinkelstrasse 2, D-52062 Aachen, Germany
^ Materials Science Centre, University of Manchester, Manchester, M13 9PL, United Kingdom
& Material Mechanics, Faculty of Georesources and Materials Engineering, RWTH Aachen University,
Schinkelstrasse 2, D-52062 Aachen, Germany
1
(Poster 4):
Microstructural characterization of cold-drawn pearlitic steel wires
S. Djaziri, Y.J. Li, S. Goto, G. Dehm
Max-Planck Institut für Eisenforschung, Max-Planck-Str. 1, D-40237 Düsseldorf, Germany
(Poster 5):
Time resolved synchrotron x-ray strain measurement
in biaxially loaded Au thin films
D. Faurie(1), P.-O. Renault(2), G. Geandier(3), E. Le Bourhis(2), C. Mocuta(4), D. Thiaudière(4)
(1) LSPM-CNRS, Université Paris13, 93430 Villetaneuse
(2) Institut Pprime, UPR 3346 CNRS – Université de Poitiers – ENSMA, BP 30179, 86962 Futuroscope,
France
(3) Institut Jean Lamour, UMR 7198 CNRS - Ecole des Mines de Nancy, Parc de Saurupt, 54042 Nancy,
France
(4) Synchrotron SOLEIL, L'Orme des Merisiers, BP 48, 91192 Gif sur Yvette, France
(Poster 6):
Physics-based constitutive modelling for crystal plasticity finite element
computation of cyclic plasticity in fatigue
Nicolò Grilli, Paul Scherrer Institut and EPFL
Koenraad Janssens, Paul Scherrer Institut
Helena Van Swygenhoven, Paul Scherrer Institut and EPFL
2
(Poster 7):
Mechanical study of nano-structured thin films under controlled biaxial
deformation
R. Guillou (1), E. Le Bourhis (1), P. Goudeau (1), P.-O. Renault (1), D. Faurie (2), C. Mocuta (3),
D. Thiaudière (3), G. Geandier (4), F. Hild (5)
(1): Institut PPRIME – CNRS/Université de Poitiers/ENSMA, Futuroscope, France
(2): LSPM – Université Paris 13, Villetaneuse, France
(3): Synchrotron SOLEIL, Gif sur Yvette, France
(4): .IJL – CNRS/Université de Lorraine, Nancy, France
(5): LMT Cachan – ENS Cachan/CNRS/UPMC/PRES Université Sud Paris, Cachan, France
(Poster 8):
In-situ observation of dislocation evolutions in single crystal Ni base
superalloys creep using discrete dislocation dynamics simulation
S.M. Hafez Haghighat (1), G. Eggeler (2), D. Raabe (1)
(1): Max-Planck-Institut für Eisenforschung, Max-Planck-Str. 1, 40237 Düsseldorf, Germany
(2): Institut für Werkstoffe, Ruhr-Universität Bochum, Universitätsstr. 150, 44780 Bochum, Germany
(Poster 9):
Growth and characterization of Cu and Cu/Fe nanowires
Wenting Huang (1,2), Lisa Weissmayer (2), Charlotte Ensslen (1), Oliver Kraft (1), Gunther Richter (2)
(1): Institute for Applied Materials, Karlsruhe Institute of Technology, Hermann-von-Helmholtz-Platz
3
1, 76344 Eggenstein-Leopoldshafen, Germany
(2): Max Planck Institute for Intelligent Systems, Heisenbergstrasse 3, 70569 Stuttgart, Germany
(Poster 10):
Measuring strain and defects in individual microcrystals: synchrotron
microdiffraction techniques combined with in situ loading.
Simon Langlais, Guillaume Beutier, Marc Verdier, Maxime Dupraz (SIMaP, Grenoble INP)
Collaborations IM2NP, ESRF (ANR MECANIX)
(Poster 11):
Phase composition and residual strain at the dental porcelain- zirconia
interface mapped by micro-focus x-ray diffraction
Alexander Lunt - Department of Engineering Science, University of Oxford
Tan Sui - Department of Engineering Science, University of Oxford
Nikolaos Baimpas - Department of Engineering Science, University of Oxford
Mengyin Xie - Department of Engineering Science, University of Oxford
T.K. Neo - Specialist Dental Group, Singapore
I. P. Dolbnya - Beamline Scientist B16, Diamond Light Source, Rutherford Appleton Laboratory
Alexander Korsunsky - Department of Engineering Science, University of Oxford
(Poster 12):
μLaue diffraction studies on single Cu nanowires
F. Mastropietro (1), Z. Ren (1), S. Labat (1), O. Thomas (1), J.-S. Micha (2), M. Cassinelli (3) L. Burr (3),
L. Belliard (4), M.E. Toimil-Molares (3), T.W. Cornelius (1)
4
1. Aix-Marseille University, CNRS, IM2NP (UMR 7334), Marseille (France),
2. CEA Grenoble, INAC/SP2M (France)
3. GSI Helmholtz Centre for Heavy Ion Research, Darmstadt (Germany),
4. Institut des Nanosciences de Paris, CNRS Université Pierre et Marie Curie, Paris (France)
(Poster 13):
Micromechanical investigation of solder joints in automotive microelectronics
Bastian Philippi (1,2), Andreas Schießl (3), Angelika Schingale (3), Gerhard Dehm (1)
(1) Max-Planck-Institut für Eisenforschung GmbH, Max-Planck-Straße 1, 40237 Düsseldorf, Germany
(2) Materials Center Leoben Forschung GmbH, Roseggerstraße 12, 8700 Leoben, Austria
(3) Continental Automotive GmbH, Siemensstraße 12, 93055 Regensburg, Germany
(Poster 14):
Residual stress measurement in thin films using the ion beam layer removal
method
Ruth Treml (1), Ronald Schöngrundner (2), Roland Brunner (2), Daniel Kiener (1)
(1) Department of Material Physics, Montanuniversität Leoben, Austria
(2) Materials Center Leoben, Austria
5
(Poster 15):
Atomic force microscope designed for In-situ mechanical tests
Z. Ren (1), F. Mastropietro (1), A. Davydok (1), J.-J. Furter (1), O. Thomas (1), M. Verdier (2),
G. Beutier (2), T.W. Cornelius (1)
(1): Aix-Marseille University, CNRS, IM2NP (UMR 7334), Marseille (France)
(2): SIMAP, University Grenoble (France)
(Poster 16):
Mechanical properties of ultrathin aluminum oxide films deposited by
reactive magnetron sputtering
Astrid van der Rest, Frédéric Henry, Joris Proost, Thomas Pardoen
Institute of Mechanics, Materials and Civil engineering,
Université catholique de Louvain, Place Sainte Barbe 2, 1348 Louvain-la-Neuve, Belgium
(Poster 17):
Inter and intra grain strain Inhomogeneities in Au polycrystalline Thin Films as
probed by Micro and Coherent Diffraction during Mechanical Loading
N. Vaxelaire (1,2), S. Labat (1,2), T. Cornelius (3), J. Keckes (4), T. Schulli (3),and O. Thomas (1,2)
(1) Aix-Marseille University, IM2NP, FST avenue Normandie Niemen, F-13397 Marseille Cedex, France
(2) CNRS, IM2NP, FST av. N. Niemen, F-13397 Marseille Cedex, France
(3) European Synchrotron Radiation Facility, BP 220, 38043 Grenoble, France
(4) University of Leoben, Jahnstrasse 12, 8700 Leoben, Austria
6
(Poster 18):
Size effects on mechanical stability of metastable austenite
M. Wang, C.C. Tasan, D. Ponge, A. Kostka, D. Raabe
Max-Planck-Institut für Eisenforschung, Max-Planck Str. 1, D-40237 Düsseldorf, Germany
(Poster 19):
Microstructure and Mechanical Properties of Nano-Silver Films
1) Saba Zabihzadeh: Materials Science and Simulations, Paul Scherrer Institut, CH-5232 Villigen,
Switzerland and Institute of Materials / École Polytechnique Fédéral Lausanne, CH-1015 Lausanne,
Switzerland
2) Steven Van Petegem: Materials Science and Simulations, Paul Scherrer Institut, CH-5232 Villigen,
Switzerland
3) Helena Van Swygenhoven: Materials Science and Simulations, Paul Scherrer Institut, CH-5232
Villigen, Switzerland/ Institute of Materials, École Polytechnique Fédéral Lausanne, CH-1015
Lausanne, Switzerland
(Poster 20):
Discrete dislocation pattern observation around nanoindents
J. Zhang, B. Liu, S. Zaefferer, D. Raabe
Max-Planck-lnstitut für Eisenforschung,
Max-Planck-Straße 1, D- 40237 Düsseldorf, Deutschland
7