Détermination par éléments finis de propriétés mécaniques

RÉFÉRENCES
BIBLIOGRAPHIQUES
Bibliographie
[1]
AMBROISE M. H., BRETHEAU T., ZAOUI A. – Crack initiation from the interface of
superficial inclusions, Mechanical behaviour of materials, 1987, p. 169-176
[2]
ARISTEGUI C., BASTE S. – Optimal recovery of elasticity tensor of general
anisotropic material from ultrasonic velocity data, J. Acoust. Soc. Am., 1997, Vol. 101,
N° 2, p. 813-833
[3]
ASHBY M.F., GIBSON L.J. – Cellular Solids––Structure and Properties, Oxford :
Pergamon Press, 1988, 532 p.
[4]
ASHBY M.F., JONES D.R.H. – Matériaux 1. propriétés et applications, Paris: Dunod,
1992, 278 p.
[5]
BABOUT L. – Etude par tomographie X et modélisation de l’endommagement de
matériaux métalliques modèles. Thèse de Doctorat, INSA de Lyon, 2002, 204 p.
[6]
BARBER J., TRIANTAFYLLIDIS N. – Effect of debonding on the stability of fiberreinforced composites, J. of Applied Mechanics, 1985, 52, pp235-237.
[7]
BASTE S., El GUERJOUMA R., AUDOIN B. – Effect of micro cracking on the
macroscopic behaviour of ceramic matric composites, Mechanics of materials, 1992,
Vol. 14, N° 1, p. 15-31
[8]
BEER G. – An isoparametric joint/interface element for finite element analysis, Int. J.
for Numer. Methods Eng., 1985, vol.21, p. 585-600.
[9]
BENVENISTE Y. – The effective mechanical behaviour of composite materials with
imperfect contact between the constituents, Mechanics of Materials, 1985, 4, p. 197208.
[10]
BERTHELOT J.F. – Les matériaux composites, Paris: Edition Masson, 1992, 620 p.
[11]
BERVEILLER M., BRETHEAU T., FOUGERES R. ET AL. – Rappels sur les
mécanismes de la plasticité et de l’endommagement,dans Homogénéisation en
mécanique des matériaux 2. Comportements non linéaires et problèmes ouverts. Paris:
Hermès, 2001, p. 203-249.
[12]
BORNERT M., STOLZ C., ZAOUI A. – Morphologically representative patternbased
bounding in elasticity, Journal of the Mechanics and Physics of Solids, 1996, vol 44 n°
3, p. 307-331
[13]
BOURCIER R.J., KOSS D.A., SMELSER R.E., RICHMOND O. – The influence of
porosity on the deformation and fracture of alloys, Acta Metall, 1986, vol34 n°12, p.
2443-2453
[14]
BOURDIN B., FRANCFORT G.A., MARIGO J.J. – Numerical experiments in
revisited brittle fracture, J. Mech. Phys. Solids, 2000, 48, p. 797-826
[15]
BRECHET Y., EMBURY J. D., TAO S,. LUO L. – Damage initiation in metal matrix
composites, Acta Metall. Mater., 1991, vol. 39, n° 8, p. 1781-1786
205
Bibliographie
[16]
BROCKENBOROUGH J.R., SURESH S., WIENECKE H.A. – Deformation of metalmatrix composites with continous fibers: Geometrical effects of fiber distribuion and
shape, Acta. Metall. Mater., 1991, 39, p. 735-752
[17]
BROWN L.M., EMBURY J.D. – The initiation and growth of voids at second phase
particles, Proceeding of the 3d international conference on strength of metals and
Alloys, Cambridge, 1973, p. 164-168.
[18]
BUFFIERE J.Y., MAIRE E., CLOETENS P., LORMAND G., FOUGERES R. –
Characterisation of internal damage in a MMCp using X-ray synchrotron phase
contrast microtomography, Acta Mater., 1999, 47, 5, p. 1613-1625
[19]
BOHM H.J., A short introduction to basic aspects of elastic homogenization, Graduate
course micromechanics of material, Ameland, Nederlands, oct 2000
[20]
CACERES H., GRIFFITHS J. R., Damage by the cracking of silicon particles in an Al7Si-0.4Mg casting alloy, Acta Materialia, Volume 44, Issue 1, January 1996, p. 25-33
[21]
CEA, DRN, DMT – Notices Cast3M, 2004, présent le 15.8.2004 sur internet :<URL
:http://www-cast3m.cea.fr/cast3m/listnotices.do>
[22]
CEA, DRN, DMT – CASTEM 2000, Guide d’utilisation, France, 1990.
[23]
CHAMPANEY L. – Contact entre solides élastiques. Versailles (Fr): Université de
Versailles Saint Quentin en Yvelines, Laboratoire d’Etudes Mecaniques des
Assemblages,2000.
présent
le
15.8.2004
sur
internet
:<URL
:http://www.lema.uvsq.fr/champaney/cours/contact-champaney.pdf>
[24]
CHARRAS T., MILLARD A., VERPEAUX P. – Solution of 2D and 3D contact
problems by mean of Lagrange multipliers in the CASTEM 2000 finite element
program,Proc. Conf. On Contact Mechanics, Eds.Aliabadi, M.H. and Brebbia,1993 ,
C.A., Comput. Mech. Publication, p183-194.
[25]
CHEN Z.T., WORSWICK M.J., CINOTTI N., PILKEY A. K., LLOYD D. – A linked
FEM-damage percolation model of aluminum alloy sheet forming, International Journal
of Plasticity, 2003, vol 19 n° 12, p 2099-2120
[26]
CHENG Y.S., HUANG Y., – Measurement of continuous damage parameter,
Engineering-Fracture-Mechanics. 1988, vol 31 n° 6, p. 985-992
[27]
CHOW C.L., WANG J. – an anisotropic theory of elasticity for continuum damage
mechanics, International Journal of Fracture, 1987, vol 33 n°1, p. 3-16
[28]
CHOW C.L., YU L.G., TAI W.H., DEMERI M.Y. – Prediction of forming limit
diagrams for AL6111-T4 under non-proportional loading, International Journal of
Mechanical Sciences, 2001, vol 43 n° 2, p. 471-486
[29]
CHRISTENSEN R.M., LO K.H. – Mechanics of composite materials, WileyInterscience Publication, NY, 1979
[30]
CHRISTENSEN R.M., LO K.H. – Solutions for effective shear properties in three
phase sphere and cylinder models, J. Mech. Phys. Solids, 1979, 27, p. 315-330.
206
Bibliographie
phase sphere and cylinder models, J. Mech. Phys. Solids, 1979, 27, p. 315-330.
[31]
CHU C.C, NEEDLEMAN A. – Void nucleation effects in biaxially stretched sheets, J.
Engng. Mater Technol., 1980, vol. 102, p. 249-256.
[32]
CHU Y.C., DEGTYAR A.D., ROKHLIN S.I. – On determination of orthotropic
material moduli from ultrasonic velocity data in nonsymetry planes, J.Acoust. Soc.
Am., 1994, Vol. 95, n°6, p. 3191-3203
[33]
COCKCROFT M.G., LATHAM D.J. – Ductility and the workability of metals, J. Inst
of Metals, 1968, vol 96, p. 33-39
[34]
COIRIER J. - Mécanique des milieux continus, Paris: Dunod, juin 1997, 468 p.
[35]
COOREVITS P., HILD P., HJIAJ M. – Calcul d’erreur a posteri pour les
approximations éléments finis du contact avec frottement de Coulomb, Comptes rendus
du 5eme colloque national en calcul des structures, 15 – 18 mai 2001, Giens
[36]
COQUARD P. – Résistance mécanique des plâtre secs et humides. Thèse de Doctorat,
Université Aix-Marseille, 1992, 100 p.
[37]
CORBIN S.F., WILKINSON D.S. – Influence of matrix strength and damage
accumulation on the mechanical response of a particulate metal matrix composite,
Acta-Metallurgica-et-Materialia, 1994, vol 42 n°4, p 1329-1335
[38]
CORDEBOIS J., SIDOROFF F. – Anisotropic damage in elasticity and plasticity,
Journal-de-Mecanique-Theorique-et-Appliquée, 1982, p. 45-59
[39]
DANY C. – Etude de l’influence de la microstructure sur les propriétés mécaniques du
plâtre sec, Rapport DEA, Génie Physique des Matériaux, Lyon INSA, 1995, 65 p.
[40]
DARIOL L., PHALIPPOU J., SALMON T. - Concepts d’interphase dans les
composites SiC/MAS-L, Comptes rendus JNC 11, 1999, Arcachon
[41]
DESOYER T., DEBORDES O. DRAGON A. - Numerical and experimental study of a
form of damage in plasticity, Arch. Mech., 1988, 40, 5-6, p. 581-594
[42]
DORLOT J.M., BAÏLON J.P., MASOUNAVE J. - Des matériaux, Montréal: Editions
de l’Ecole Polytechnique de Montréal, 1991, 467 p.
[43]
DOUARCHE, N. – Optimisation de l’architecture et de la nature des constituants pour
la tenue en service des composites carbone-carbone pour application de freinage.
Thèse de Doctorat, INSA de Lyon, 2000, 159 p.
[44]
DUBUGET, M. – Evaluation non destructive des matériaux par ultrasons :
caractérisation de l’état initial et suivi sous charge des propriétés d’élasticité linéaire
et non linéaire d’alliages d’aluminium,.Thèse de Doctorat, INSA de Lyon, 1996, 196
p.
[45]
DUCRET D., EL GUERJOUMA R., GUY P., R’MILI M., BABOUX J.C., MERLE P.
– Characterisation of anisotropic elastic constants of continuous alumina fibre
reinforced aluminium matrix composite processed by medium pressure infiltration,
207
Bibliographie
Composites Part A: Appl. Sce & Manufacturing, 2000, 31, 1, p. 45-55
[46]
DUCRET D., EL GUERJOUMA R., JAYET Y, BABOUX J. C. - Anisotropic damage
evaluation in polymer fiber composites under hygrothermal aging by means of
ultrasonic techniques, THOMPSON D. O. & CHIMENTI D. E, (Eds). Review of
progress in quantitative nondestructive evaluation, New York : American Institute of
Physics, 2000, p. 1199-1206.
[47]
DUCRET D., EL GUERJOUMA R., FRANCIOSI P., BABOUX J.C. - Etude de
l’interphase fibre/matrice de composites Verre-epoxy à taux de renfort élevé, Proc of
the 12th National Workshop on Composites (JNC 12), 2000, Cachan, France, V2 p.
857-868.
[48]
DUVAUT G. - Mécanique des milieux continus, Paris: Masson, 1990, 292 p.
[49]
EBERSOLT L., HAMY J.M. - Description géométrique des éléments massifs et
spécifications des points et poids d’integration, Rapport DEMT 85/400, 16 octobre
1985
[50]
EL GUERJOUMA R., BABOUX J. C., DUCRET D. et al - Non-destructive evaluation
of damage and failure of fibre reinforced polymer composites using ultrasonic waves
and acoustic emission. Adv. Engng. Mater., 2001, vol. 3, n° 8, p. 601-608.
[51]
ESTEVEZ R., MAIRE E., FRANCIOSI P. et al - Effect of particle clustering on the
strenghtening versus damage rivalry in particulate reinforced elastic plastic materials :
a 3-D analysis from a self-consistent modelling, Eur. J. Mech. A/solids, 1999, vol. 18,
p. 785-804.
[52]
ESHELBY J.D. - The determination of the elastic field of an ellipsoidal inclusion, and
related problems, Proc. Roy. Soc., March 1957, vol. A241, p. 376-396
[53]
FAVIER S. - Contribution à l’etude de l’endommagement de matériaux métalliques
contenant des particules dures : application à l’alliage 3004-H19 thèse de doctorat.
INPG, 1995, 273 p.
[54]
FELIX S., - Implantation dans le code de calcul Castem2000 d’un élément joint
bidimensionnel et tridimensionnel, Rapport DMT /93. 655, 16 novembre 1993, 79 p.
[55]
FRANCIOSI P., GAERTNER R. – On phase connectivity descriptions in modelling
viscoelasticity of fiber or sphere reinforced composites, Polymer composites, 1998, 19,
1, p. 81-95.
[56]
FRANCIOSI P, LORMAND G. – Using the Radon transform to solve inclusion
problems in elasticity, Int J. of Solids and Structures, 2004, 41, p. 585-606
[57]
FRANCOIS D., PINEAU A., ZAOUI A. – Comportement mécanique des matériaux,
élasticité et plasticité, Paris: Hermes, 1995, 504 p.
[58]
GARBOCZI E. – Finite element and finite difference programs for computing the
linear electric and elastic properties of digital images of random materials, Internal
report n°6269, Gaithersburg (USA): NIST, 1998, 204 p.
208
Bibliographie
[59]
GARBOCZI E., MARTYS N., BENTZ D. – Digital images and computer modelling,
Experimental methods for porous media,Ed Wong, New York: Academic Press, 1999.
[60]
GAUTHIER C., KHAVANDI A., FRANCIOSI P., GAERTNER R., PEREZ J., –
Evaluation of dynamic mechanical properties of unidirectional composites in relation
with their morphology, Polymer Composites, 1998, 19, 6, p 667-679.
[61]
GAY D., Matériaux composites, 4éme édition, Paris: Hermès, Toulouse: université et
IUT, 1997, 672 p.
[62]
GRENIER, J.C. – Etude de l’endommagement pendant la mise en forme à froid de tôles
d’aluminium. Thèse de Doctorat, INSA de Lyon, 2004, 238 p.
[63]
GURSON A. L. – Continuum theory of ductile rupture by void nucleation and growth :
Part I -Yield criteria and flow rules for porous ductile media J. of Engineering
Materials and Technology, 1977, vol. 99, p. 2-15.
[64]
HAMEL A., VINCENT A., FOUGERES R. – A model for the unloading stiffness in the
saturation fatigue stage of pure aluminium, Acta Metall. Mater., 1990, vol. 39, n° 2, p.
301-312.
[65]
HAUSSÜHL S. – Elastische und thermoelastische Eingenschaften von CaSO4,2H2O
(Gips), Zeitschrift fur Kristallographie, 1960, 122, p. 311-314.
[66]
HASHIN Z., SHTRIKMAN S. – A variational approach to the theory of the elastic
behaviour multiphase materials, J. Mech. Phys. Solids, 1963, 11, p.127-140.
[67]
HASHIN Z. – Thermoelastic properties of fiber composites with imperfect interfaces,
Mechanics of Materials, 1990, 8, p.333-348.
[68]
HERVE E., STOLZ C., ZAOUI A., – A propos de l’assemblage des sphères composites
de HASHIN, C. R. Acad. Sci., Paris, 1991, 313, p. 857-862.
[69]
HERVE E., ZAOUI A., – N-layered inclusion-based micromechanical modelling, Int. J.
Eng. Sci., 1993, 31,1, p. 1-10.
[70]
HERVE E., ZAOUI A., – Elastic behaviour of multiply coated fibre-reinforced
composites, Int. J. Eng. Sci., 1995, 33,10, p. 1419-1433.
[71]
HIBBITT, KARLSSON, SORENSEN – Contact in ABAQUS/Standard, 1996, USA
[72]
HILD F., BURR A., LECKIE F.A. – Fiber breakage and fiber pull-out of fiber
reinforced ceramic matrix composites, Eur J.Mech A/Solids, 1994, 13, 6, p. 731-749
[73]
HILL R. – Continuum micromechanic of elastoplastic polycristals, J. Mech Phys
Solids, 1965, vol 13, p. 89-101
[74]
HILL R., – The essential structure of constitutive laws for metal composites and
polycrystals, J. Mech. Phys. Solids, 1967, 15, 1, p. 79-95
[75]
HORSTEMEYER M.F., GOKHALE A.M. – A void–crack nucleation model for ductile
metals, International Journal of Solids and Structures, 1999, vol. 36 n° 33, p. 5029-5055
209
Bibliographie
metals, International Journal of Solids and Structures, 1999, vol. 36 n° 33, p. 5029-5055
[76]
HOSFORD W.F., CADDEL R.M. – Metal Forming, Mechanics and Metallurgy,
Englewood Cliffs: Prentice-Hall, 1983, 121 p.
[77]
HOSTEN B., CASTAGNEDE B., – Optimisation du calcul des constantes élastiques à
partir des des mesures de vitesse d’une onde ultra-sonore, C. R. Acad. Sc. Paris. 1983,
t296, Série II, p. 297-300.
[78]
HOSTEN B. J., – Reflection and transmission of acoustic plane waves on an immersed
orthotropic and viscoelastic solid layer, Acoust. Soc. Am., 1991, Vol. 89, p. 2745-2752.
[79]
HUMPHREYS F. J., – In-situ SEM studies of the fracture of aluminium particulate
composites, Proc. of the congress: EMAG MICRO 89, London, sept. 1989. London:
IOP publishing Ltd., 1989, p.465-468.
[80]
JOHNSON G.C., WENK H.R. - Elastic properties of polycrystals with trigonal and
orthorhombic specimen symmetry, J of Appl. Physics, 1986, 60, 11, p. 3868-3875.
[81]
KACHANOV L.M. - Introduction to Continuum Damage Mechanics, Dordrecht, The
Netherlands Nijhoff, 1986, 138 p.
[82]
KARIHALOO B.L., VISVANATHAN K. - Elastic field of an elliptic inhomogeneity
with debonding over an arc (antiplane strain), J of Appl. Mechanics, 1985, 52, p. 9197.
[83]
KARIHALOO B.L., VISVANATHAN K. - Elastic field of a partially debonded elliptic
inhomogeneity in an elastic matrix (plane strain), J of Appl. Mechanics, 1985, 52, p.
835-840.
[84]
KOUZELI M., WEBER L., SAN MARCHI C., MORTENSEN A. – Quantification of
microdamage phenomena during tensile straining of high volume fraction particle
reinforced aluminium, Acta Mater, 49, 2001, p. 497-505
[85]
LEBAIL, H. – Caractérisations microscopiques et tomographiques de microstructures
de matériaux composites et étude des relations aux propriétés élastiques
associées.Thèse de Doctorat, INSA de Lyon, 2001, 320 p.
[86]
LEBENSOHN R., SOLAS D., CANOVA G., BRECHET Y. – Modelling damage of AlZn-Mg alloys, Acta-Materialia. Jan. 1996; vol 44 n°1, p. 315-325
[87]
LEE C. S., KIM Y. H., LIM T., HAN K. S. – Dynamic observation of failure process in
Al/SiCw composite materials, Scripta Metall. Mater., 1991, vol. 25, n°3, p. 613-618.
[88]
LEMAITRE J., DUFAILLY J. – Damage measurements, Engineering Fracture
Mechanics, 1987, vol 28 n°5-6, p 643-661.
[89]
LEMAITRE J., CHABOCHE J.L. - Mécanique des matériaux solides, Paris: Dunod,
1996, 544 p.
[90]
LLORCA J., MARTIN A., RUIZ J., ELICES M. – Particulate fracture during
deformation of a spray formed metal-matrix composite, Metall. Trans. A, 1993, vol.
210
Bibliographie
24A, p. 1575-1588.
[91]
LLORCA J. – Void formation in metal matrix composites, dans Clyne T. W. (Ed).
Comprehensive composites Materials. Vol 3, Metal Matrix Composites. Amsterdam:
Elsevier, 2000, p. 91-115
[92]
MAIRE E., VERDU C., LORMAND G., FOUGERES R. – Study of the damage
mechanisms in an OSPREYTM Al alloy-SiCp composite by scanning electron
microscope in situ tensile tests, Mater. Sci. Eng., 1995, vol. A196, p. 135-144.
[93]
MAIRE E., WILKINSON D.S., EMBURY J.D., FOUGERES R. – Role of damage on
the flow and fracture of particulate reinforced alloys and metal matrix composites, Acta
Mater., 1997, vol. 45, n°12, p. 5261-5274.
[94]
MAIRE E., WILKINSON D. S., EMBURY J. D. & HENEIN H. – Ductilization of a
powder metallurgy Al-17 Wt Pct Cu by means of channel-die compression and
extrusion, Metall. Mater. Trans. A, 1998, vol. 29A, pp. 2613-2620.
[95]
MARTIN C. F., JOSSEROND C., SALVO L., BLANDIN J. J., CLOETENS P.,
BOLLER E. – Characterisation by X-ray micro-tomography of cavity coalescence
during superplastic deformation. Scripta Mater., 2000, vol. 42, p. 375-381.
[96]
MASSON R., BORNERT M., SUQUET P., ZAOUI A. – An affine formulation for the
prediction of the effective properties of nonlinear composites and polycrystals, Journal
of the Mechanics and Physics of Solids, Volume 48, Issues 6-7, 1 June 2000, p. 12031227
[97]
MEILLE, S. – Etude du comportement mécanique du plâtre pris en relation avec sa
microstructure. Thèse de Doctorat, INSA de Lyon, 2001, 219 p.
[98]
MICHEL J.C., MOULINEC H., SUQUET P., – Effective properties of composite
materials with periodic microstructure: a computational approach, Computer methods
in applied mechanics and engineering, 1999, num. 172, p 109-143
[99]
MILTON G.W. – Modelling the properties of composites by laminates, In
homogenization and effective moduli of materials and media (ed J.L.Ericksen et al), NY : Springer-Verlag., 1986, p. 150-174
[100]
MOKHTARI M., MESBAH A. – Apprendre et maitriser matlab, Berlin Heidelberg:
Springer-Verlag, 1997, 728 p.
[101]
MONNERIE L. – Changements conformationels et interprétation moléculaire des
transitions viscoélastiques secondaires, dans Introduction à la mécanique des
polymères, France: C.G’Sell et J.M. Haudin, publié par l’Institut National
Polytechnique de Lorraine, ISBN 2-905267-22-4, 1995 , p 275-288
[102]
MONTHEILLET F., MOUSSY F. – Physique et mécanique de l'endommagement, Les
Ulis : Les Editions de Physique, 1986, 258 p.
[103]
MORI T., TANAKA K, – Average stress in matrix and average elastic energy of
materials with misfitting inclusions, Acta Metall Mater, 1973, 21, p. 597-629.
211
Bibliographie
[104]
MOSCHOVIDIS Z.A., MURA T. – Two-ellipsoidal inhomogeneities by the equivalent
inclusion method, J. of Applied Mechanics, 1975, 42, p. 847-852
[105]
MOUCHTACHI A., EL GUERJOUMA R., BABOUX J.-C. – Non destructive
ultrasonic evaluation of fibrous metal matrix composite, Applied Composite Materials,
1995, Vol. 1, p. 387-393.
[106]
MOULINEC H., SUQUET P., – A fast numerical method for computing the linear and
non linear mechanical properties of composites, Paris: C.R. Acad. Sci., 1994, vol. 318,
num. II, p 1417-1423
[107]
MOULINEC H., SUQUET P., – A numerical method for computing the overall
response of nonlinear composites with complex microstructure, Comput. Methods
Appl. Mech. Engrg., 1998, vol. 157, p 69-94
[108]
MURA T., JASIUK I., TSUCHIDA B. – The stress field of a sliding inclusion, Int
J.Solids and Structures, 1985, 21, 12, p.1165-1179
[109]
NAIRN J.A., – A variational mechanics analysis of the stresses around breaks in
embedded fibers, Mechanics of Materials, 1992, 13, p. 131-154
[110]
NEEDLEMAN A., TRIANTAFYLLIDIS G.A. – Void growth and local necking in
biaxially stretched sheets, Journal of engineering materials and technology, vol 100,
1978, p. 164-169
[111]
PAGANO N.J., TANDON G.P. – Modeling of imperfect bonding in fiber reinforced
brittle matrix composites, Mechanics of Materials, 1990, 9, p. 49-64
[112]
PEGON P., ANTOINE A., – Numerical analysis and modelling of the damage and
softening of brick masonry, London: J.W. Bull, Blackie Academic & Professional,
1996. Chapter 7 of numerical analysis and modelling of composite materials.
[113]
PEGON P., ANTOINE A., – Numerical strategies for solving continuum damage
problems involving softening: application to the homogenization of masonry, Second
International Conference on Computational Structures Technology, Athen, 30 Aug.
1994.
[114]
PINEL S., VERPEAUX P. – Maillage Automatique des domaines tridimensionnels
massifs Développement d’un logiciel protoype dans GIBI, Rapport DEMT 84-177, 3
septembre 1984, 134 p.
[115]
PONTE CASTAÑEDA P. – Bounds and estimates for the properties of non linear
heterogeneous systems, Phil. Trans. R. Soc. Lond. A, 1992, 340, p. 531-567.
[116]
PONTE-CASTAÑEDA P., WILLIS J.R. – The effect of spatial distribution on the
effective behaviour of composite materials and cracked media, J. Mech. Phys. Solids,
1995, 43, p. 1919-1951
[117]
PONTE CASTAÑEDA P., SUQUET P. – Nonlinear composites, Adv. Appl. Mech. 34
1998, p. 171–302
212
Bibliographie
[118]
POOLE W.J., DOWDLE E.J. – Experimental measurements of damage evolution in AlSi eutectic alloys, Scripta Materialia, Vol. 39, Issue 9, 5 October 1998, p 1281-1287
[119]
POULHALEC A., COGNARD J. Y. – Approche parrallèle basée sur l’utilisation de
deux découpages pour la simulation des problèmes non linéaires, Comptes rendus du
XVéme congrès Français de Mécanique, Nancy, 3 septembre 2001.
[120]
PRANGNELL P.B., DOWNES T., WITHERS P.J., STOBBS W.M. – The Deformation
of discontinuously reinforced MMCs. II. The elastic response, Acta-Metallurgica-etMaterialia. Oct. 1994; vol 42 n°10, p 3437-3442
[121]
PRESS W.H., TEUKOLSY S.A., VERTTERLING W.T., FLANNERY B.P. –
Numerical recipes in C. 2nd edition. New York : Cambridge University Press, 1992.
[122]
RICCARDI A. – Etude théorique de configurations inclusionnaires non classiques en
elasticité linéaire isotrope,Thèse de doctorat, Ecole des mines de St Etienne 1998
[123]
RICE J.R., TRACEY D.M. – On the ductile enlargement of voids in triaxial stress
fields, J. Mech. Phys. Solids, 1969, vol. 17, p. 201-217.
[124]
RICOTTI Y., DOUARCHE N, FRANCIOSI P., ROUBY D. – Estimation des modules
d’élasticité d’un stratifié carbone – carbone en présence de dégradation des interfaces
fibres matrices, Comptes rendus de Matériaux 2002, Tours, 21 octobre 2002.
[125]
ROBBE X. – Etude des relations entre limites de formage et endommagement des
alliages d’aluminium destinés à la carrosserie automobile. DEA de l’ENSPG, 1996
[126]
ROKHLIN S.I., CHU Y.C., HUANG W. – Ultrasonic evaluation of fatigue damage in
metal matrix composites, Mechanics of materials, 1995, Vol. 21, N° 1, p. 251-263
[127]
ROUBY D., REYNAUD P. – Fatigue behaviour related to interface modification
during load cycling in ceramic-matrix fibre composites, Composites Science and
Technology, 1993, 48, p. 109-118,
[128]
ROUSSELIER G. – Finite deformation constitutive relations including ductile fracture
damage. IUTAM Symposium on three-dimensional constitutive relations and ductile
fracture, Dourdan, juin 1980. Edited by NEMAT-NASSER S., 1980, p. 331-355.
[129]
ROYER D., DIEULESAINT E. – Ondes élastiques dans les solides, Tome 1,
Propagation libre et guidée. Paris : Masson, 1996, 328 p.
[130]
SADOWSKI M.A., STERNBERG E. – Stress concentration around an ellipsoidal
cavity in an infinite body under arbitrary plane stress perpendicular to the axis of
revolution of cavity, J. of Applied Mechanics, 1947, 69, p.191-201
[131]
SCHMITT J.H., JALINIER J.M. – Damage in sheet metal forming––I: physical
behavior; damage in sheet metal forming-II: plastic instability, Acta Metallurgica 30,
1982, p. 1789–1809.
[132]
STRAFFELINI G., MOLINARI A. – Evolution of tensile damage in porous iron,
Materials Science and Engineering A, Volume 334, Issues 1-2, 1 September 2002, p 96-
213
Bibliographie
103
[133]
SUQUET P. – Rappels sur les mécanismes de la plasticité et de l'endommagement,
Homogénéisation en mécanique des matériaux 2. Comportements non linéaires et
problèmes ouverts. Paris : Hermes Science Europe Ltd, 2001, p. 203-249.
[134]
TANDON G.P. – Use of composite cylinder model as representative volume element
for unidirectional fiber composites, J of Composite materials, 1995, 29, p. 388-409.
[135]
TANDON G.P., PAGANO N.J. – Effective thermoelastic moduli of unidirectional fiber
composites containing interfacial arc microcracks, Trans of ASME 63, 1996, p. 210217.
[136]
TANG C.Y. – Anisotropy in continuum damage mechanics, Scripta Metallurgica et
Materialia, vol 29 n°2, 1993; p. 183-188
[137]
TANG C.Y., LEE W.B. – Effects of damage on the shear modulus of aluminium alloy
2024T3, Scripta Metallurdica et Materiala, vol 32 n° 12, 1995, p. 1993-1999
[138]
THEBAUD F. – Vers l'introduction de l'endommagement dans la prévision globale du
comportement de composites à matrice métallique. Thèse de doctorat, Ecole
Polytechnique Palaiseau, 1993, 269 p.
[139]
THOMASON P. F. – A theory for ductile fracture by internal necking of cavities,.
Journal of the institute of metals, 1968, vol. 96, p. 360-365.
[140]
THOMASON P. F. – Ductile fracture of metals, Pergamon Press, 1990.
[141]
THOMSON C.I.A., WORSWICK M.J., PILKEY A.K., LLOYD D.J. BURGER G. –
Modeling void nucleation and growth within periodic clusters of particles, Mech. Phys.
Solids, 1999, vol. 47, p. 1-26.
[142]
TSUCHIDA E., MURA T., DUNDURS J. – The elastic field of an elliptic inclusion
with a slipping interface, J. Of Applied Mechanics, 53, p. 103-107.
[143]
TVERGAARD V. – Material failure by void growth to coalescence. Adv. Appl. Mech.,
1990, vol. 27, p. 83-151.
[144]
TVERGAARD V., NEEDLEMAN A. – Effects of nonlocal damage in porous plastic
solids, International-Journal-of-Solids-and-Structures, April-May 1995; vol 32 n°8-9, p.
1063-1077
[145]
VAN DAMME H., PELLENC R., DELVILLE A. – La physique des liaisons entre
hydrates et les moyens d’agir au niveau moléculaire, Comptes rendues de la journée
technique de l’industrie cimentière, Dijon, 21 janvier 1998
[146]
VENKATAKRISHNAIAH S., DHARANI L.R. – Analysis of an axisymmetric matrix
crack in a single fiber composite, Eur J.Mech A/Solids, 1993, 12, 4, p. 567-583.
[147]
WACKER G., BLEDZKI A.K, CHATE A. - Effect of interphase on the transverse
Young’s modulus of glass/epoxy composites, Composites, 1998, vol. 29a, p. 619-626
214
Bibliographie
[148]
WALPOLE L.J. - Elastic behaviour of composite materials, Advances in Appied
Mechanics, 1981, 21, p.169-242
[149]
WHITEHOUSE A. F., CLYNE T. W. - Cavity formation during tensile straining of
particulate and short fibre metal matrix composite, Acta Metall. Mater., 1993, vol. 41,
n° 6, p. 1701-1711.
[150]
WILKINSON D.S., MAIRE E. FOUGERES R. A - Model for damage in a clustered
particulate composite, Mat. Sci. Eng., 1999, vol. A262, p. 264-270.
[151]
WILLIS J.R - Variational and related methods for the overall properties of composites,
Advances in Applied Mechanics, 1981, 21, p.1-78
[152]
WORSWICK M.J, PILKEY A.K., THOMSON C.I.A., LLOYD D.J., BURGER G. Percolation damage predictions based on measured second phase particle
distributions, Microstructural Science, V 26, 1998, p. 507-514
[153]
ZHAO D., TULER F. R., LLOYD D. J. - Fracture at elevated temperatures in a
particle reinforced composite, Acta Metall. Mater., 1994, vol. 42, n° 7, p. 2525-2533.
[154]
ZHAO Y.H., WENG G.J. - Transversely isotropic moduli of two partially debonded
composites Int J. Solids and Structures, 1997, 34, 4, p. 493-507
[155]
ZHENG S.F., DENDA M., WENG G.J. – Interfacial partial debonding and its
influence on the elasticity of a two-phase composite, Mechanics of Materials, 2000, 32,
p. 695-709
[156]
ZHUANG D., SANDOR B.I., - A thermoelasticity theory for damage in anisotropic
materials, Fatigue Fract Engng Mater Struct, 1990, Vol 13, No 5, p. 497-509
[157]
ZIENKIEWICZ O.C., TAYLOR R.L. – La méthode des éléments finis : formulation de
base et problèmes linéaires, Paris : Afnor Technique, 1991, 620 p.
215