SDC Lifting Wire Hydraulic Release System
Transcription
SDC Lifting Wire Hydraulic Release System
Comanex SDC Lifting Wire Hydraulic Release System COMEX standard releasable sockets are designed and approved for lifting wire ropes from Ø 22 mm to Ø 42 mm. Other designs are available upon request. The socket eye is hold directly by the ram rod. Removing the rod releases the socket. The hydraulic ram is actuated by a manual pump located inside the bell. COMEX standard is to operate all the bell hydraulic release systems from 1 pump and to use a Release System Selection Panel to operate every function one after the other. DESIGNATION COMANEX REF. 170 08808 150 02377 Hydraulic release socket Jack cylinder tel. 33 491 297 515 | fax. 33 491 407 204 | e-mail. [email protected] | address. 36 Boulevard des Océans - BP 143 - 13275 Marseille Cedex 9 FRANCE www.comanex.fr