Téléchargez la fiche CT-6 COMMERCIAL
Transcription
Téléchargez la fiche CT-6 COMMERCIAL
2891 128.020 Boulevard Cabinets d’aisances SALLE DE TOILETTE BUREAUX DE DIRECTION C/L OF SEAT POST HOLES 5-1/2" (140mm) CENTRES 14" (350mm) 18-1/2" (470mm) SUPPLY AS REQUIRED (position 1 or position 2) 3-3/8" (8mm) Compliance Certifications Meets or Exceeds the Following Specifications: • ASME A112.19.2-2008/CSA B45.1-08 • Certified in EPA WaterSense HET program ❑ Colour: ❑ White ❑ Bone ❑ Linen ❑ Supply with stop: ACCESSOIRE 14-1/2" (368mm) 3/4" (19mm) monopièce, cuvette allongée en porcelaine vitrifiée, réservoir de chasse Nominal à actionDimensions: siphonique, finition 756 x 368siphon x 778mm «EverClean», 50 mm Ø, tour (29-3/4" x 14-1/2" 30-1/2") de chasse 75 mm Ø, xc/a siège et couvercle à fermeture lente «Duroplast», hauteur 419 mm. Fixture only, supply by others Garantie 10 ans. To Be Specified 29-3/4" (756mm) 16-1/2" (419mm) 3-1/4" (83mm) CT-6 1.07 gpf/4.8 Lpf • Meets EPA WaterSenseSM criteria • Contributes to a LEED solution • Elongated siphon action bowl with smooth-sided, concealed trapway • PowerWash™ rim scrubs bowl with each flush • 419mm (16-1/2”) rim height for accessible applications • Fully glazed 2" (51mm) trapway • Oversized 3" (76mm) Flush Valve with Chemical Resistant Flapper • Chrome trip lever • 2 colour-matched bolt hole covers • Includes colour-matched Duroplast Slow Close Toilet Seat and cover with easy lift-off feature for simple removal and reattachment for cleaning FINISHED WALL CABINET D’AISANCES • 100% factory flush tested 7-1/2" • Transitional (192mm) AU PLANCHER 4,8design LPCcoordinates with Studio and Boulevard sinks Cabinet• d’aisances au plancher 10 year warranty on entire toilet 8-1/2" (217mm) 12" (305mm) 13-1/2" (345mm) 5-1/2" (140mm) FINISHED FLOOR 30-1/2" (778mm) 9" (229mm) 3-3/4" (95mm) 6" 14-1/4" (152mm) (364 mm) IMPORTANT: Water supply on the wall is required at 3-3/4" (95mm) or 9" (229mm) from centreline of the toilet (see rough-in). First suggested position is hidden behind the toilet. The geometry of the toilet gives space for this installation. The second suggested position is next to the toilet. Between these two positions, the space for the supply between wall and toilet is limited to 3-1/4" (83mm). In this case, check your supply and hose dimensions. NOTES: THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET. SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY. DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED. IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerance established by ANSI Standard A112.19.2 These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages. * Tuyauterie d’alimentation de toilette avec robinet d’arrêt d’équerre robuste à tournant sphérique, flexible en cuivre, 300 mm de long, rosace fini chrome plaqué. ● When installed so top of seat is 432 to 483mm (17" to 19") from the finished floor. Certified by IAPMO R&T H166LKN3 MEETS THE AMERICAN DISABILITIES ACT GUIDELINES AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USEABLE BUILDING FACILITIES-CHECK LOCAL CODES. TOI-111 01/10 © 2010 American Standard 305