TV converter module and TCCC 677 TCCC 678
Transcription
TV converter module and TCCC 677 TCCC 678
TV converter module TCCC 677 and TCCC 678 (8 MHz BW) (7 MHz BW) Out adjuput leve stm ent l Description: The TCCC 677 and 678 is a TV channel converter in the TCH 600 system. TCCC 677 and 678 converts one TV channel from one frequency to another frequency. Description: Le module TCCC 677 et 678 est un convertisseur de canaux TV destiné à la TCH 600. Le TCCC 677 et 678 convertit tout canal dans la plage 47-862 MHz en un autre canal Beschreibung: Der TCCC 677 und 678 ist ein Fernseh-Kanalkonverter im TCH 600 System. TCCC 677 und 678 setzt einen Fernsehkanal von einer Frequenz in eine andere Frequenz um. Beskrivelse: TCCC 677 og 678 er et TV konverter modul til anvendelse i TCH 600 Serien. Modulet konvertere en TV kanal fra en frekvens til en anden frekvens. Beskrivning TCCC 677 och 678 är en TV konverter til TCH 600 serien. TCCC 677 och 678 konverterar en TV kanal fra en frekvens til en annan frekvens. Kuvaus: TCCC 677 ja 678 ovat kanavanvaihtajia TCH 600 järjestelmään. Lähtökanava voidaan vapaasti ohjelmoida koko TV-alueella. Electrical data: Input frequency range ........................................................(MHz) Output frequency range......................................................(MHz) Input signal range ..............................................................(dBµV) TV carrier stability...............................................................(kHz) Spurious signals ref. TV carrier ..........................................(dB) Output level max in TCH600 system..................................(dBµV) Output level attenuator .......................................................(dB) Output impedance ..............................................................(Ohm) 45 - 862 45 - 862 60 - 90 < +/-25 > -60 100 0 10 75 Voltage/current ...................................................................(V, mA) 5/120 -12/300 - 30/5 TV input ..............................................................................IEC-F Aerial output, MOD .............................................................IEC-M 891369B Operation TV converter module TCCC 677 and TCCC 678 Programming start Programming To open the unit for programming press left and right buttons at the same time. (App. 2 sec.) Programmation Laccés aux menus de programmation seffectue par action simultanée des touches Droite & Gauche M M Display at power-on Program (module no.) Pr.01 , Pr.02 , ...Pr.08 Move menu or digit Move dot left or right Déplacement menu Sélection des paramètres Sélection du digit Select Menu Backwards Menu Sub Menu The displayed value is selected by means of the M button, and programming jumps to next menu. The up button, makes possible jumping to previus menu The right button, select sub menu M M M M Sélection du menu Retour menu Sous menu Down Pour accèder à La valeur affichée est Il est possible un sous menu mémorisée à laide de revenir à la actionner la de la touche M , fonction précédente touche de droite le menu suivant est en activant la alors accéssible touche UP Module No. (#1- # 8) Module type ID Indication à la mise sous tension Up (+) or Dot left ou Dot right * Enable moving dot (-) With the left/right buttons, one of the digits in the display can be chosen to be affected. This digit is indicated by a dot in the bottom right corner. = Press Button Touche à actionner Module Identification M * Le digit à modifier est selectionné à laide des touches Droite & Gauche Indentification des modules Module type Indication Module ??? = TV Converter Module M Input frequency M M M * Input Frequency Fréquence dentrée Steps of 10 or1 MHz M M M M MHz in steps of 250KHz Example: 471.25MHz M Output frequency M M M * Output Frequency MHz in steps of 250KHz Steps of 10 or1 MHz Example: 55.25MHz M Programming lock Sortie mode programmation Mèmorisation des paramètres All settings are transfered to systemcontrol Unlocked Reset To lock the unit for programming press left and right buttons at the same time. M M Return to Programming start Mode normal programming locked Pour sortir du mode programmation, action ner simultanément les boutons Gauche & Droite Press the buttons 3-5 sec. M Software Revision no. (in 1-2 sec.) All segment on (in 1-2 sec.) Remark: If one of the button is not affected for more than 30 minutes in programming mode the unit automatically goes back in lock mode. Reset usine Pour effacer la programmation, actionner simultanément les boutons pendant 3 à 5 sec Affichage de la version de soft. ( 1 à 2 sec.) Tous les segments sont apparents (in 1 à 2 sec.) Remarque: Lappareil revient automatiquement en mode normal au bout dune demi heure lorsquaucune touche nest actionnèe.