51C(CO,CR)S-SS/51C(CO,CR)S-SS Type C,CO,CR 1.5 HR
Transcription
51C(CO,CR)S-SS/51C(CO,CR)S-SS Type C,CO,CR 1.5 HR
SÉRIES 5100S-SS CONSTRUCTION ACIER INOXYDABLE VOLETS COUPE FEU STATIQUE HOMOLOGUÉS 1 ½ HEURE HORIZONTAL & VERTICAL VOLETS MOTORISÉS & VOLETS COUPE FEU 51C(CR,CO)XS-SS • TYPE C • UL 555 & CAN/ULC-S112 Volet coupe-feu classification statique, homologué 1 1/2 hr. (File # R25565). • Conforme aux NFPA 80, 90A & 101. • Conforme au code du bâtiment NBC & IBC. TYPE C CONSTRUCTION STANDARD PROFONDEUR: CONSTRUCTION OPTIONNELLE □ Construction en acier inoxydable type 316. □ Manchons installés en usine – 22, 20, 18 or 16 GA 4 ¼ po (108 mm) CADRE: Acier inoxydable formé type 304. *Longueur de manchon requise LAMES: Rideau en acier inoxydable formé type 304. □ Fusible de 212°F (100°C). □ Support de montage : angle de 1po ½ x 1po ½ FUSIBLE :165°F (73.9°C) LAME FIXÉE AU CADRE 4 TÊTE DE LAMES HAUTEUR TYPE CO TYPE CR 1 2 3 5 MODÈLE 51CVS-SS 51CRVS OUVERTURE DU CONDUIT - 14" (VERTICAL) DÉTAIL B 1" 4.25" 2" 51CRHS MODÈLE 51CHS-SS (HORIZONTAL) 1 2 3 2" 4.25" LAME FIXÉE AU CADRE 4 5 TÊTE DE LAMES HAUTEUR 6 7 1" OUVERTURE DU CONDUIT - 14" COMPOSANTES 5. Tête de lame couvert en acier inox 2. Fusible Std 165°F 6. Ressort sous tension en acier inox. 3. Attache de fusible en inox. 7. Système de verrouillage en acier inox. 4. Cadre en acier inox 1. Lame en acier inox. 195 HEALEY ROAD | Recommandations du manufacturier: Les volets coupe-feu doivent être inspectés et testés 1 an suivant l’installation, et pour les prochains 4 ans au minimum. Le tout en conformité avec la dernière édition de NFPA 80. D’autres inspections plus fréquentes peuvent être requises dues à l’utilisation du système et aux conditions environnantes ou des codes locaux applicables. NOTES: Ces volets dynamiques sont homologués par UL//ULC pour un usage dans un système de ventilation ‘HVAC’, advenant l’arrêt des ventilateurs dans le cas d’un feu’’. Classifié pour résistance au feu 1 ½ heure pour des matériaux de construction classifiés 2 heures ou moins. Les volets coupe-feu doivent être installés selon les instructions du manufacturier. Veuillez vous référer au manuel d’installation Alumavent pour plus de détails. **Dimensions en pouces (mm) BOLTON, ON. L7E 5B2 | TEL (905) 857-4700 | FAX (905) 857-4730 | QC. (450) 314-3091 | www.alumavent.com SÉRIES 5100S-SS CONSTRUCTION ACIER INOXYDABLE VOLETS COUPE FEU STATIQUE HOMOLOGUÉS 1 ½ HEURE HORIZONTAL & VERTICAL VOLETS MOTORISÉS & VOLETS COUPE FEU 51C(CR,CO)XS-SS • TYPE C TYPE C (COLLET CARRÉ/RECTANGULAIRE) : TYPE CR (COLLET ROND): Grandeur min.: Vertical seulement: 4” x 4” (102 x 102). Grandeur max.: Section simple Vertical: 30” x 31”(762 x 787). Horizontal: 34” x 31” (864 x 787). Section multiple Vertical seulement: 94” x 67” (2388 x 1702). Grandeur min.: Vertical ou horizontal: 4” (102) diamètre. Grandeur max.: Section simple Vertical: 30” (762) diamètre. Horizontal: 31” (787) diamètre. Section multiple Vertical seulement: 67” (1702) diamètre. TYPE CO (COLLET OVALE): Grandeur min.: Vertical ou horizontal: 4” x 3” (102 x 76) ovale. Grandeur max.: Section simple Vertical: 30” x 31”(762 x 787) ovale. Horizontal: 34” x 31” (864 x 787) ovale. Section multiple Vertical seulement: 94” x 67” (2388 x 1702) ovale. NOTE: POUR LES DIMENSIONS HORS TOUT DES VOLETS, VOIR LA CHARTE DE DIMENSIONS 1½ HEURE STATIQUE EN ACIER TYPE C SC51CS-SS REF. # QTE. Largeur du conduit [po] PROJET: ENTREPRENEUR: ACCESSOIRES CONSULTANT: DATE: Dimensions en pouces (mm). 195 HEALEY ROAD | Hauteur du conduit H [po] Les informations ci-dessus sont sujettes à changement sans avertissement ou obligation. 10 /2012 BOLTON, ON. L7E 5B2 | TEL (905) 857-4700 | FAX (905) 857-4730 | QC. (450) 314-3091 | www.alumavent.com