Combirex Combirex CXL-P

Combirex CXL-P
Combirex
Operational Data and Specifications
COMBIREX CXL-P sizes (B)
2500
3000
3500
Cutting width (1 single torch) (A)
mm
2000
2500
3000
Cutting width (2 single torches)
mm
1800
2300
2800
Cutting width (3 single torches)
mm
1600
2100
2600
Cutting width (4 single torches)
mm
1400
1900
2400
Base rail length
mm
5000
5000
5000
Extension (max. 18 m)
mm
1000
1000
1000
Rail height
mm
665 / 465
665 / 465
665 / 465
Cutting thickness with 1 torch
mm
3 – 150
3 – 150
3 – 150
Cutting thickness with 2 torch
mm
3 – 100
3 – 100
3 – 100
Cutting thickness with 4 torch
mm
3 – 80
3 – 80
3 – 80
Recommended processing speed
mm / min
50 – 6000
50 – 6000
50 – 6000
Positioning rate
mm / min
20000
20000
20000
4
4
4
Max. number of tool carriages
Fuel gases
acetylene/propane/natural gas/gas mixtures
Main voltage
V / Hz
230 / 50
230 / 50
230 / 50
Power input
VA
~ 2000
~ 2000
~ 2000
Machine length
mm
1500
1500
1500
Machine height (D)
mm
1660
1660
1660
Cutting table height
mm
700
700
700
Machine width (C)
mm
3500
4000
4500
FLEXIBLE AND MODULAR
INCREASE YOUR EFFICIENCY
The right to make technical modifications and improvements is reserved.
Your
Partner
ESAB, your Partner
in Welding
in Welding and Cutting
and Cutting
Almost seventy years’ experience of
cutting and responding to customers’
needs have resulted in an extensive
range of products to meet profile cutting
applications. Based around the four
methods of laser cutting, oxy-fuel
cutting, plasma cutting and water jet
cutting, ESAB has developed a range of
machines that deliver better cut quality,
higher cutting speeds, lower operating
costs and allow sophisticated integration
into automated production methods.
The right to make technical modifications and improvements is reserved.
ESAB CUTTING SYSTEMS GmbH
Robert-Bosch-Strasse 20 • 61184 Karben, Germany
Phone: + 49 (0) 60 39 / 40 - 0 • Fax: + 49 (0) 60 39 / 40 - 301
E-mail: [email protected]
www.esab-cutting.de
COMBIREX-CXL-P_EN_0905_1000_N
About ESAB
Machines
Processes
Numerical Controls
Programming
Environment
The solid COMBIREX CXL-P can
torches. Due to its special design,
Its modular concept renders
be fitted with up to four cutting tools
the machine is remarkably versatile
COMBIREX CXL-P fit for future
– both plasma and oxy-fuel cutting
and flexible.
production challenges.
Modular Dimensions in Flame Cutting
The rugged and solid portal machine
is available in three different sizes
(2,500, 3,000 and 3,500 mm).
The base rail length can be extended
by 1,000 mm increments up to
18,000 mm so the machine can
be customized for both standard and
non-standard plate dimensions.
The machine consists of a solid,
reinforced main beam which ensures
perfect stiffness over the entire
machine width.
One of the two lateral panels is
mounted below the cutting table
height. This allows for ease of loading
and unloading of the table with forklift trucks and minimizes risk of collision with the machine.
COMBIREX-CXL-P – Advantages at a Glance
Modular design with versatile
CNC system
Longitudinal rail extension
up to 18 m
Three sizes available
(2,500, 3,000, 3,500 mm)
Plasma and/or
oxy-fuel cutting
Combirex
Combirex CXL-P
Modular
Modular
and efficient
and
efficient
Plasma cutting
Various ESAB plasma cutting systems
for material thicknesses of up to 30 mm
are available for cutting unalloyed steel,
stainless steel or aluminum.
The precise setting of the cutting
torch height is achieved by means
of an initial height sensing and
maintained by an arc voltage height
control during the cutting process.
This ensures optimum cutting quality
at all times.
Oxy-fuel cutting
COMBIREX CXL-P can be fitted with
up to four oxy-fuel cutting torches for
processing unalloyed steel plates with
thicknesses of up to 150 mm.
Each tool carriage is provided with
a reliable, automatic 230 Volt ignition
device. Solenoid valves on the
carriages allow for automatic piercing.
Sophisticated Mechanical Design
Apart from a transverse drive motor
with precision rack and pinion gear,
COMBIREX CXL-P features backlashfree gears and drives allowing
for high positioning rates of up to
20,000 mm / min.
The ESAB collision protection system
will immediately stop the cutting
process and shutdown the machine
in case of disorder.
The linear guiding with AC motors
ensures accurate travel of the tool
carriage as well as extraordinary
acceleration values. Sophisticated
design and precise workmanship
reduces maintenance expense and
ensures a long mechanical service life.
For cutting with several torches,
up to four tool carriages are attached
to a zero-backlash steel band which –
contrary to conventional steel ropes –
is not susceptible to slag deposits.
The specialized rapid-action coupling
allows for efficient manual positioning
of the tool carriages and mirror-inverted cutting.
Numerical Control System
Whether fitted with oxy-fuel cutting
or plasma torches – the decisive
advantage of COMBIREX CXL-P
is its high flexibility.
All processes may be controlled
directly via the CNC system. Extensive control functions, numerous available interfaces and an integrated cutting data base allow for an optimum
degree of reliable reproducible quality.
This results in low cost with high
productivity.
The cutting height is determined by
a capacitive ring which aids precise,
straight cutting.