NT718 - Imesys
Transcription
NT718 - Imesys
TRANSFORMATEURS DE MESURE SENSORS INSTRUMENTS DE MESURE Transformateur de courant pour réseau basse tension Protection Transformateur de courant monophasé Primaire à barre passante Courant primaire 1500…6000A Courant secondaire 1 - 5A Classe de précision cl. 5P5 - 5P10 - 5P15 - 5P20 Prestatation nominale: 50…180VA (5P5) 15…50VA (5P10) 6…15VA (5P15) 1,5VA (5P20) OUVERTURE A Curret transformers for low-voltage network Protection TAU101P Single-phase current transformer Passing bus bar primary Primary current 1500...6000A Secondary current 1 - 5A Accuracy class : cl. 5P5 - 5P10 - 5P15 - 5P20 Rated burden: 50…180VA (5P5) 15…50VA (5P10) 6…15VA (5P15) 1,5VA (5P20) WINDOW = 120 x 125 Cache bornes plombable Sealable terminal cover NT718 01 - 2015 6a Ed. pag.1/4 (Option Option) RÉFÉRENCE / ORDER CODE Secondaire / Secondary 5A 1A 3020 6804 3020 6814 3020 6805 3020 6815 3020 6806 3020 6816 3020 6807 3020 6817 3020 6808 3020 6818 3020 6809 3020 6819 3020 6810 3020 6820 3020 0008 Courant primaire Primary current cl. 5P5 cl.5P10 cl.5P15 cl.5P20 A VA VA VA 1500 50 15 6 2000 50 15 6 2500 80 25 10 3000 100 35 10 4000 100 40 15 5000 160 40 8 6000 180 50 10 Accessoire cache bornes plombable / Accessory sealable terminal cover NORME DE REFERENCE VA 1,5 1,5 1,5 - REFERENCE STANDARDS EN / IEC 61869-1, 61869-2 EN / IEC 61869-1, 61869-2 CARACTERISTIQUES TECHNIQUES SPECIFICATIONS Fréquence nominale: 50Hz Rated primary current Ipr : 1500…6000A Courant nominal primaire Ipr: 1500…6000A Fréquence de fonctionnement: 47…63Hz Rated frequency: 50Hz Courant thermique nominal continu Icth: < 100% Ipr Option: rated requency 400Hz (burdens to the advised) Courant nominal dynamique Idyn: 2,5Ith Rated short-time thermal current Ith: < 60Ipr (max. 90kA) Working frequency: 47…63Hz Option: fréquence nominale 400Hz (prestation à préciser) Courant thermique nominal de court-circuit Ith: < 60Ipr (max. 90kA) Rated continuous thermal current Icth: < 100% Ipr Courant nominal secondaire Isr: 5-1A Rated dynamic current Idyn : 2,5Ith - 1,5VA(cl.5P20) Rated burden: 50…180VA(cl.5P5) - 15...50VA(cl.5P10) - 6...15VA(cl.5P15) - Puissance maximum dissipée: ≤ 69W Accuracy class: cl.5P5 - cl.5P10 - cl.5P15 - cl.5P20 Prestation nominale: 50…180VA(cl.5P5) - 15...50VA(cl.5P10) - 6...15VA(cl.5P15) 1,5VA(cl.5P20) Classe de précision: cl.5P5 - cl.5P10 - cl.5P15 - cl.5P20 Max. power dissipation 2: ≤ 69W Pour le dimensionnement thermique du coffret For switchboard thermal calculation 2 Fonctionnement avec secondaire ouvert 1 minute Working time guaranteed with secondary winding open for 1 minute Les transformateurs de courant ne doivent pas fonctionner avec l'enroulement secondaire en circuit ouvert en raison du danger potentiel de surtension et la Current transformers should not be operated with the secondary winding Pour remédier à ce problème, il est possible d'utiliser l’accessoire ATAP015 (NT710) overheating which can occur. accessoire est en mesure de détecter en continu la tension aux bornes et, si la be directly connected with the transformer secondary winding, which is able déconnexion des dispositifs, l’accessoire referme automatiquement le circuit. threshold value (18V) owing to a connection breakdown or disconnection of automatiquement. Connecté en permanence avec l'enroulement secondaire du When the normal working conditions are restored, it automatically performances du transformateur de courant. Il ne nécessite aucune alimentation transformer to protect, it doesn’t affect at all the current transformer features open-circuited because of the potentially dangerous over-voltages and surchauffe qui peut se produire. pour être directement raccordé à l'enroulement secondaire du transformateur. Cet To obviate this problem, it is possible to use ATAP015 (NT710) accessory to tension atteint la valeur seuil (18V) à cause d’une rupture de raccordement ou de to continuously detect the terminal voltage and, if the voltage reaches the Lorsque les conditions de travail normales sont rétablies, il se déconnecte the devices, automatically closes again the circuit. transformateur à protéger, il ne porte pas atteinte aux fonctionnalités ni aux disconnects. Continuously connected with the secondary winding of the externe (auto-alimenté). or performances. It doesn’t need any external supply (self-supplied). LIMITE DES ERREURS DE COURANT ET DEPLACEMENT DE PHASE LIMITS OF CURRENTS ERROR AND PHASE DISPLACEMENT (EN/IEC 61869-1, 61869-2) (EN/IEC 61869-1, 61869-2) Erreur du courant en % du courant primaire nominal Classe de précision Accuracy class Current error at rated primary current % 5P ±1 Déplacement de phase en % du courant primaire nominal Phase displacement at rated primary current % Minutes Minutes ± 60 Selon les modèles, le courant limite primaire correspond à 5 - 10 - 15 - 20 fois Centiradiants Centiradians Erreur composite en % de la limite de précision du courant nominal primaire Composite error at rated accuracy limit ± 1,8 primary current % 5 au courant nominal primaire According to the models, the limit primary current corresponds to 5 - 10 - 15 - PRESCRIPTIONS RELATIVES À L’ISOLEMENT INSULATION REQUIREMENTS Tension maximum pour l’isolement Um: 0,72kV valeur efficace Dry transformer, air insulation Classe d’isolement (EN/IEC 61869-1, 61869-2): B Rated insulation level: 3kV r.m.s. 50Hz/1min Transformateur sec, isolé dans l’air Niveau de tension nominale pour l’isolement: 3kV valeur efficace 50Hz/1min 20 times the rated primary current (In) Highest voltage for equipment Um: 0,72kV r.m.s. Class of insulation (EN/IEC 61869-1, 61869-2): B NT718 01 - 2015 6a Ed. pag.2/4 2 Rated secondary current Isr : 5 - 1A CONDITIONS D’UTILISATION ENVIRONMENTAL CONDITIONS Température de référence: 23°C ± 1°C Non-exposed installation (EN/IEC 61869-1, 61869-2) Température moyenne journalière: ≤ 30°C Nominal temperature range: -25…40°C Température de stockage: -40…85°C Humidité relative: ≤ 85% Limit temperature range for storage: -40…85°C Adapté pour l’utilisation en climat tropical Suitable for tropical climates BOITIER HOUSING Indice de protection (EN60529): IP20 boitier, IP00 bornes (IP20 avec cache borne plombable) Protection degree (EN60529): IP20 housing, IP00 terminals (IP20 with sealable Option: cache borne plombable Poids 5700 grammes (Max.) Option: sealable terminal cover RACCORDEMENT CONNECTIONS Secondaire : par cosse, serrage par écrou M5 Primary winding: passing bus bar Repérage: primaire P1(K) – P2(L) Option: side terminals Installation non exposée (EN/IEC 61869-1, 61869-2) Température d’utilisation: -25…50°C Matériau du boîtier: polycarbonate autoextinguible Primaire: barre passante Option: bornier latéral NT718 01 - 2015 6a Ed. pag.3/4 secondaire s1(k) – s2(l) Reference temperature: 23°C ± 1°C Daily mean temperature: ≤ 30°C Relative humidity: ≤ 85% Housing material: self extinguishing polycarbonate terminal cover) Weight: 5700 grams (Max.) Secondary winding: tightening by nut M5 Connections label: primary winding P1(K) – P2(L) secondary winding s1(k) – s2(l) 257 SCHEMA DE RACCORDEMENT WIRING DIAGRAM 221 110 IMESYS se réserve à chaque moment de modifier les caractéristiques sans préavis écrit / IMESYS reserves the right to modify the technical characteristics without notice. A NT718 01 - 2015 6a Ed. pag.3/4 DIMENSIONS DIMENSIONS 233,5*