Application
Transcription
Application
Application SVT 17 / 05 Banc d’endurance compresseur R134a Compressing test bench of endurance R134a Branche Branch • Industrie automobile • Industrie de sous-traitance automobile • Car industry • Automobile industry of subcontracting Application Application Banc d'essais de compresseur automobile au R134a avec son circuit complet fonctionnel (évaporateur et condenseur) Test bench of automobile compressor in R134a with its functional complete circuit (evaporator and condenser) Description de l’équipement Description of equipment Ensemble comprenant : Including : • Une enceinte froid chaud pour le compresseur automobile en essai, • A chamber hot cold for the automobile compressor under test, • Une enceinte froid chaud pour le condenseur automobile, • A chamber hot cold for the automobile condenser, • Une enceinte froid chaud humide pour l'évaporateur automobile, • A chamber hot cold humidity for the automobile evaporator, • Un compartiment machinerie frigorifique, • A refrigerating compartment machinery, • Un armoire électrique intégrant la baie informatique de pilotage du banc. • An electrical equipment box integrating data-processing bay of piloting of the test bench. SVT / La simulation climatique # D2162313 APPLICATION : SVT / La simulation climatique # D2162313 Caractéristiques techniques Technical Data • Température Enceinte "Condenseur" Plage : -40°C/+80°C • Temperature Chamber “Condenser” Range : - 40°C/+80°C Enceinte "Compresseur" Plage : -40°C/+200°C Chamber “Compressor” Range : - 40°C/+200°C Enceinte "Évaporateur" Plage : -40°C/+80°C Chamber “Evaporator” Range : - 40°C/+80°C Précision : ± 0.5 °C Precision: ± 0.5 °C • Hygrométrie Enceinte "Evaporateur" Plage d'hygrométrie : de 30% à 80% dans la plage température +20°C à +80°C Hygrométrie mini limitée au point de rosée mini de -15°C (exemple : à +20°C, l'hygrométrie mini réalisable est de 7 %) Précision : ± 2 % Affichage de la consigne sur le régulateur à 1 % près Homogénéité de l'enceinte en tous points distants de 5 à 10 cm des parois et après stabilisation 1 à 3°C suivant les températures d'essais 5 à 8 % suivant les hygrométries demandées • Pilotage et supervision L’ensemble du moyen est piloté par un superviseur informatique avec chaînage des essais en automatique. • Humidity Chamber “Evaporator” Range of humidity from 30% to 80% in the range temperature +20°C with +80°C Mini humidity limited to the mini dewpoint of - 15°C (example: with +20°C, the realizable mini humidity is 7%) Precision: ± 2% Display of the instruction on the regulator with a margin of 1% Homogeneity of the chamber in all distant points from 5 to 10 cm of the walls and after stabilization 1 with 3°C according to the temperatures of tests / 5 to 8% following humidity requested • Piloting and supervision The whole of the means is controlled by a data-processing supervisor with chaining of the tests automatically. Les points de pilotage importants : Important points of piloting: Compresseur : Vitesse 0 à 14 000 tr/min en 5" Couple 0 à 100 N.m Empcv 0 à 1A 400 Hz Compressor: Speed 0 to 14.000 tr/min in 5 " 0 to 100 N.m couples Empcv 0 with 1A 400 Hz Condenseur : Débit ventilation : 10 000 m³/h Pression entrée et sortie : 0 à 3,5 MPa Condenser: Flow split: 10.000 m ³/H Entered and left pressure: 0 to 3,5 MPa Évaporateur : Débit ventilation : 0 à 600 m³/h Pression entrée : 0 à 3,5 MPa Pression sortie : 0 à 1,6 MPa Evaporator: Flow split: 0 to 600 m ³/H Entered pressure: 0 to 3,5 MPa Left pressure: 0 to 1,6 MPa SERVATHIN Bancs d’essais climatiques 283, route d’Andrésy - BP 4015 - 78304 POISSY Cedex Tél : (33) 01 34 01 11 00 Fax : (33) 01 39 75 11 00 E-Mail : [email protected] Internet : www.servathin.com