AKO Control
Transcription
AKO Control
AKOCONTROL The most suitable range of temperature and humidity control www.ako.com AKOCONTROL Thermometers Range from -50ºC to +99ºC, panel mounting, small format Small dimensions 66 x 32 x 56 mm. The size of the panel cut-outs make them exchangeable with the traditional mechanical thermometers. Password enabled for entering programming, indication in ºC or ºF programme-selectable and probe calibration. Application: Industrial and commercial cold, displays, cabinets, etc. • Temperature range -50ºC to +99ºC • Display 2 Digits (ºC/ºF) • Resolution 1ºC • Accuracy ±1ºC • NTC probe • Panel cut-out dimensions 25.4 x 58 mm • Front dimensions 32 mm x 66 mm • Depth 51 mm Reference AKO-13012 AKO-13020 AKO-13023 Description _ 12V~, ºC / ºF per programme, probe 1.5 m 120V~, ºC / ºF per programme, probe 1.5 m 230V~, ºC / ºF per programme, probe 1.5 m Family Pack 1510 1510 1510 12 Units 12 Units 12 Units Thermostats Range from –50ºC to +99ºC, 1 relay, panel mounting, small format Small dimensions 66 x 32 x 56 mm. The dimensions of the panel cut-out make them exchangeable with traditional mechanical thermometers, by also integrating the thermostat and defrost clock function in a single unit. Programmable for cold and heat. Defrost by compressor stop. Possible password for entering programming, indication in ºC or ºF programme-selectable and probe calibration. Application: Industrial and commercial cold, displays, cabinets, etc. • Temperature range -50ºC to +99ºC • Display 2 Digits (ºC/ºF) • Resolution 1ºC • Accuracy ±1ºC Reference AKO-13112 AKO-13120 AKO-13123 Description _ 12V~, relay SPST 16A, NTC probe included 120V~, relay SPST 16A, NTC probe included 230V~, relay SPST 16A, NTC probe included • NTC probe • Panel cut-out dimensions 25.4 x 58 mm • Front dimensions 32 x 66 mm • Depth 51 mm Family Pack 1510 1510 1510 12 Units 12 Units 12 Units 13 AKOCONTROL Thermometers Range from -50ºC to +150ºC, panel mounting Temperature display. Temperature display in cold and heat applications. The AKO-14031 allows probe calibration, display in ºC or ºF and password programming to enter programming. Application: Industrial and commercial cold, displays, incubators, vehicles, etc. • With NTC probe, temperature range from -50.0ºC to +99.9ºC • With PTC probe, temperature range from -50.0ºC to +150ºC • 3-digit display (ºC/ºF) • Resolution 0,1ºC • Accuracy ±1 ºC • NTC probe • Panel cut-out dimensions70.5 x28.5 mm • Front part dimensions 75.8 x 33.8 mm • Depth 61 mm • Power supply 230V~ ±10%, 50/60 Hz Reference AKO-14012 AKO-14023 Description _ 12/24V~, probe 1.5 m 230V~, probe 1.5 m Family Pack 1510 1510 12 Units 12 Units Thermostats Range from -50ºC to +150ºC, 1 relay output, panel mounting Programmable for cold and heat. Display and control with decimal point. NTC or PTC probe selectable program. Password enabled for entering programming, indication in ºC or ºF programmeselectable and probe calibration. Defrost by compressor stop. Application: Industrial and commercial cold, displays, incubators, etc • With NTC probe, temperature range from 50.0ºC to +99.9ºC • With PTC probe, temperature range from 50.0ºC to +150ºC • Temperature range -50.0ºC to +99.9ºC • Temperature range -50.0ºC to +150ºC Reference Description AKO-14112 AKO-14120 AKO-14123 AKO-14129 12/24V~, 120V~, 230V~, 230V~, 14 1 relay SPDT 16A, 1 NTC probe included 1 relay SPDT 16A, 1 NTC probe included 1 relay SPDT 16A, 1 NTC probe included 1 relay SPDT 18A, 1 NTC probe included • Display 3 Digits (ºC/ºF) • Resolution 0.1 ºC • Accuracy ±1ºC • Panel cut-out dimensions 70.5 x 28.5 mm • Front part dimensions 75.8 x 33.8 mm • Depth 61 mm Family Pack 1510 1510 1510 1510 12 Units 12 Units 12 Units 12 Units www.ako.com AKOCONTROL Temperature controllers Range from -50ºC to +99ºC, 2 relays, panel mounting Defrost by electric heat or air. The 2nd relay allows one of the following options to be regulated: - Defrost by electric heat - Defrost by hot gas bypass - Defrost by air With a 2nd optional probe, it enables defrost by temperature. Possible password for entering programming, indication in ºC or ºF programme-selectable and probe calibration. Application: Industrial and commercial cold, displays, electrical panels, etc. • Temperature range -50ºC to +99ºC • Display 3 Digits (ºC/ºF) • Resolution 0.1ºC • Accuracy ±1 ºC • NTC probe • Panel cut-out dimensions70.5 x 28.5 mm • Front part dimensions 75.8 x 33.8 mm • Depth 61 mm • Compressor relay SPST 16A, 250V, cosϕ= 1 • Relay R2 SPDT 8A, 250V, cosϕ= 1 AKO-14212 Reference AKO-14212 AKO-14220 AKO-14223 AKO-14223 Description _ 12V~, 2 relays (one 16A), 1 NTC probe included 120V~, 2 relays (one 16A), 1 NTC probe included 230V~, 2 relays (one 16A), 1 NTC probe included Family Pack 1510 1510 1510 12 Units 12 Units 12 Units Temperature controllers Range from -50ºC to +99ºC, 3 relays, panel mounting Defrost by electric heat, air or hot gas bypass. Programmable defrost by regulating the compressor, resistances (or hot gas bypass) and fans. With a 2nd optional probe allowing defrost by temperature. Possible password for entering programming, indication in ºC or ºF programme-selectable and probe calibration. Application: Industrial and commercial cold, displays, electrical panels, etc. • Temperature range -50ºC to +99ºC • Display 3 Digits (ºC/ºF) • Resolution 0.1ºC • Accuracy ±1ºC • NTC probe • Panel cut-out dimensions 70.5 x 28.5 mm • Front part dimensions 75.8 x 33.8 mm • Depth 61 mm • Compressor relay SPST 16A, 250V, cosϕ= 1 • Fan relay SPST 6A, 250V, cosϕ= 1 • Defrost relay SPDT 8A, 250V, cosϕ= 1 AKO-14312 Reference AKO-14312 AKO-14320 AKO-14323 Description _ 12V~, 3 relays (one 16A), 1 NTC probe included 120V~, 3 relays (one 16A), 1 NTC probe included 230V~, 3 relays (one 16A), 1 NTC probe included AKO-14323 Family Pack 1510 1510 1510 12 Units 12 Units 12 Units 15 AKOCONTROL Temperature controllers Range from -50ºC to +99ºC, 3 relays, modular Relay for compressor, fans and defrost. Defrost by electric heat, air or hot gas bypass, programmable by regulating the compressor, resistances (or hot gas bypass) and fans. With a 2nd optional probe allowing defrost by temperature Application: Industrial and commercial cold, displays, electric panels, etc. • Temperature range -50ºC to +99ºC • Resolution 1ºC • Accuracy ±1 ºC • NTC probe • Compressor relay SPST 20A, 250V, cosϕ = 1 • Fan relay SPST 6A, 250V, cosϕ = 1 • Defrost relay SPDT 8A, 250V, cosϕ = 1 Reference Description Family Pack AKO-14530 AKO-15121 AKO-15122 AKO-15123 AKO-15127 AKO-15128 Control module, with 1 NTC probe included 1.0 m cable for interconnection 2.0 m cable for interconnection 0.3 m cable for interconnection Power supply auxiliary module 120V~ Power supply auxiliary module 230V~ 1510 1590 1590 1590 1510 1510 12 Units 10 Units 10 Units 10 Units 10 Units 10 Units Temperature controllers Range from -50ºC to +99ºC, 4 relay, panel mounting Compressor, fan, defrost and alarm relays. Defrost by electric heat, air or hot gas bypass, programmable by regulating the compressor, resistances (or hot gas bypass) and fans. With a 2nd optional probe, it enables defrost by temperature. Additional relay for indicating alarms. Possible password for entering programming, indication in ºC or ºF programme-selectable and probe calibration. Input for independent temperature probe. Digital input for door contact. Application: Industrial and commercial cold, displays, electrical panels, etc. • Temperature range -50ºC to +99ºC • Display 3 Digits (ºC/ºF) • Resolution 0.1ºC • Accuracy ±1 ºC • NTC probe • Panel cut-out dimensions 70.5 x 28.5 mm Reference AKO-14412 AKO-14423 16 Description _ 12V~, 4 relays (one 16A), 1 NTC probe included 230V~, 4 relays (one 16A), 1 NTC probe included • Front part dimensions 75.8 x 33.8 mm • Depth 61 mm • Compressor relay SPST 16A, 250V, cosϕ= 1 • Fan relay SPST 6A, 250V, cosϕ = 1 • Defrost relay SPDT 8A, 250V, cosϕ = 1 • Alarm relay SPST 6A, 250V, cosϕ= 1 Family Pack 1510 1510 12 Units 12 Units www.ako.com AKOCONTROL Thermometers Range from –50ºC to +150ºC, wall mounting NTC or PTC probe programme-selectable. Temperature display in cold and heat applications. Allows probe calibration, display in ºC or ºF and password to enter programming. Fixing holes adapted to universal embedding box. Application: Industrial and commercial cold, cold rooms, industrial warehouses, etc. • With NTC probe, temperature range from -50.0ºC to +99.9ºC • With PTC probe, temperature range from -50.0ºC to +150ºC • Display 3 Digits (ºC/ºF) • Resolution 0.1ºC • Accuracy ±1 ºC • Box dimensions 171 x 94 x 42 mm • Power supply 230V~ ±10%, 50/60 Hz Reference Description Family Pack AKO-14602 Thermometer 230V~, 1 NTC probe included 1510 10 Units Temperature controllers Range from -50ºC to +150ºC, 1 relay, wall mounting Programmable for cold and heat NTC or PTC probe programme-selectable. Display and control with decimal point. Wall mounting. Fixing holes adapted to universal embedding box. Parameter protection by password. Indication in ºC or ºF Application: Industrial and commercial cold, cold rooms stores, incubators, industrial warehouses, etc. • With NTC probe, temperature range from -50.0ºC to +99.9ºC • With PTC probe, temperature range from -50.0ºC to +150ºC • Display 3 Digits (ºC/ºF) • Resolution 0.1 ºC • Accuracy ±1 ºC • Box dimensions 171 x 94 x 42 mm • Control relay SPST 16A, 250V, cosϕ= 1 • Power supply 230V~ ±10%,50/60 Hz Reference Description Family Pack AKO-14610 AKO-14612 Controller 230V~, 1 SPST relay, 1 NTC probe included Controller 120V~, 1 SPST relay, 1 NTC probe included 1510 1510 10 Units 10 Units 17 AKOCONTROL Temperature controllers Range from -50ºC to +99ºC, 3 relays, wall mounting Defrost by electric heat, air or hot gas bypass. Programmable defrost by regulating the compressor, resistances (or hot gas bypass) and fans. With a 2nd optional probe, it enables defrost by temperature. Password enabled for entering the programming. Indication in ºC or ºF selectable by programme and probe calibration. Application: Industrial and commercial cold, cold room stores, etc. • Temperature range -50ºC to +99.9ºC • Display 3 Digits (ºC/ºF) • Resolution 0.1 ºC • Accuracy ±1 ºC • NTC probe • Box dimensions 171 x 94 x 42 mm • Digital input for door contact. • Compressor relay SPST 16A, 250V, cosϕ = 1 • Fan relay SPST 6A, 250V, cosϕ = 1 • Defrost relay SPDT 8A, 250V, cosϕ = 1 • Power supply 230V~ ±10%,50/60 Hz Reference Description Family Pack AKO-14632 Controller 230V~, 3 SPST relay, 1 NTC probe included 1510 10 Units Temperature controllers Range from -50ºC to +99ºC, 4 relays, wall mounting Configurable auxiliary relay Defrost by electric heat, air or hot gas bypass, programmable by regulating the compressor, resistances (or hot gas bypass) and fans. With a 2nd optional probe, it enables defrost by temperature. Auxiliary relay configurable for indicating alarms, defrost 2nd evaporator or solenoid control. Possible stop for pump down. Input for independent temperature probe or defrost control in 2nd evaporator. Digital input for door contact. Application: Industrial and commercial cold, cold room stores, etc. • Temperature range -50ºC to +99.9ºC • Display 3 Digits (ºC/ºF) • Resolution 0.1ºC • Accuracy ±1 ºC • NTC probe • Box dimensions 171 x 94 x 42 mm • Compressor relay SPST 16A, 250V, cosϕ = 1 • Fan relay SPST 6A, 250V, cosϕ = 1 • Defrost relay SPDT 8A, 250V, cosϕ = 1 • Auxiliary relay SPST 6A, 250V, cosϕ = 1 • Power supply 230V~ ±10%,50/60 Hz Reference Description Family Pack AKO-14642 Controller 230V~, 4 relays, 1 NTC probe included 1510 10 Units 18 www.ako.com AKOCONTROL Temperature controllers Range from -50ºC to +99ºC, 1 relay, DIN rail mounting Defrost by compressor shutdown. 3 keys: Up, Down, Set. Possible password for entering programming, indication in ºC or ºF programme-selectable and probe calibration. Input for independent temperature probe. Digital input for door contact. Application: Industrial and commercial cold, displays, electric panels, etc. • Temperature range -50ºC to +99ºC • Display 3 Digits (ºC/ºF) • Resolution 0.1 ºC • Accuracy ±1 ºC • NTC probe • Power supply 230V~ ±10%, 50/60Hz • Box dimensions 70 x 90 x 58 mm (4 DIN modules) • Front part dimensions 42.2 x 66.2 mm • Compressor relay SPST 16A, 250V, cosϕ = 1 Reference Description Family AKO-12123 / AKOTIM-21TE 230V~, 1 relay SPST 16A, 1 NTC probe included 1520 Pack 6 Units Temperature controllers Range from -50ºC to +99ºC, 2 relays, DIN rail mounting Compressor relay and R2 (defrost or fans). 3 keys: Up, Down, Set. Defrost by electric heat or air. The 2nd relay allows one of the following options to be regulated: - Defrost by electric heat - Defrost by hot gas bypass - Defrost by air With a 2nd optional probe, it enables defrost by temperature. Possible password for entering programming, indication in ºC or ºF programme-selectable and probe calibration. Input for independent temperature probe. Digital input for door contact. Application: Industrial and commercial cold, displays, electric panels, etc. • Temperature range -50ºC to +99ºC • Display 3 Digits (ºC/ºF) • Resolution 0.1ºC • Accuracy ±1 ºC • NTC probe • Power supply 230V~ ±10%, 50/60Hz • Box dimensions 70 x 90 x 58 mm (4 DIN modules) • Front part dimensions 42.2 x 66.2 mm • Compressor relay SPST 16A, 250V, cosϕ= 1 • Relay R2 SPDT 8A, 250V, cosϕ= 1 Reference Description Family Pack AKO-12223 / AKOTIM-22TE 230V~, 2 relays (one 16A), 1 NTC probe included 1520 6 Units 19 AKOCONTROL Temperature controllers Range from -50ºC to +99ºC, 3 relays, DIN rail mounting Relay for compressor, fans and defrost. 3 keys: Up, Down, Set. Defrost by electric heat, air or hot gas bypass, programmable by regulating the compressor, resistances (or hot gas bypass) and fans. With a 2nd optional probe, it enables defrost by temperature. Possible password for entering programming, indication in ºC or ºF programme-selectable and probe calibration. Input for independent temperature probe. Digital input for door contact. Application: Industrial and commercial cold, displays, electric panels, etc. • Temperature range -50ºC to +99ºC • Display 3 Digits (ºC/ºF) • Resolution 0.1ºC • Accuracy ±1ºC • NTC probe • Power supply 230V ~ ±10%, 50/60Hz • Box dimensions 70 x 90 x 58 mm (4 DIN modules) • Front part dimensions 42.2 x 66.2 mm • Compressor relay SPST 16A, 250V, cosϕ= 1 • Fan relay SPST 6A, 250V, cosϕ= 1 • Defrost relay SPDT 8A, 250V, cosϕ= 1 Reference Description Family Pack AKO-12323 / AKOTIM-23TE 230V~, 3 relays (one 16A), 1 NTC probe included 1520 6 Units Temperature controllers Range from -50ºC to +99ºC, 4 relays, DIN rail mounting Relay for compressor, fans, defrost and alarm. 3 keys: Up, Down, Set. Defrost by electric heat, air or hot gas bypass, programmable by regulating the compressor, resistances (or hot gas bypass) and fans. Defrost start triggered by clock in real time. With a 2nd optional probe, it enables defrost by temperature. Additional relay for indicating alarms. Possible password for entering programming, indication in ºC or ºF programme-selectable and probe calibration. Input for independent temperature probe. Digital input for door contact. Application: Industrial and commercial cold, displays, electric panels, etc. • Temperature range -50ºC to +99ºC • Display 3 Digits (ºC/ºF) • Resolution 0.1ºC • Accuracy ±1 ºC • NTC probe Reference Description AKO-12423 / AKOTIM-23ARTE 230V~, 4 relays (one 16A), 1 NTC probe included 20 • Power supply 230V~ ±10%, 50/60Hz • Box dimensions 70 x 90 x 58 mm (4 DIN modules) • Front part dimensions 42.2 x 66.2 mm • Compressor relay SPST 16A, 250V, cosϕ= 1 • Fan relay SPST 6A, 250V, cosϕ = 1 • Defrost relay SPDT 8A, 250V, cosϕ = 1 • Alarm relay SPST 6A, 250V, cosϕ= 1 Family Pack 1520 6 Units www.ako.com AKOCONTROL Large frontal temperature controllers 2 relays, panel mounting Compressor and light relay. 6 keys: Up, Down, Set, Escape, Light and ON/OFF. Pushbutton to turn the unit on and off and light switch. Defrost by compressor shutdown. Continuous cycle is possible. Password enabled for entering programming, programme-selectable indication in ºC or ºF. Digital input configurable for door contact, severe alarm, remote defrost, change in set-point temperature Application: Industrial and commercial cold, displays, electric panels, etc. AKO-10123 *8 A 6 7 *16 A 8 9 N LIGHT 10 11 12 N COOL N L 230 V~ 13 14 15 DI1 S1 - TEM • Temperature range -50ºC to +99ºC • Display 3 Digits (ºC/ºF) • Resolution 0.1ºC • Accuracy ±1 ºC • NTC probe • Panel cut-out dimensions 150 x 31 mm • Box dimensions 149 x 30 x 57.7 mm • Trim 179.9 x 37.9 mm • Compressor relay SPST 16A, 250V, cosϕ=1 • Light relay SPDT 8A, 250V, cosϕ=1 • Power supply 230V~ ±10%, 50/60Hz Reference Description Family Pack AKO-10123 Controller 2 relays, 230V~, 1 NTC probe included 1510 10 Units Large frontal temperature controllers 3 relays, panel mounting Compressor relay, (defrost or fans) and light. 6 keys: Up, Down, Set, Escape, Light and ON/OFF. Pushbutton to turn the unit on and off and light switch. Defrost by electric heat or by air and possible continuous cycle. Password enabled for entering programming, programme-selectable indication in ºC or ºF. Digital input configurable for door contact, severe alarm, remote defrost, change in set-point temperature Application: Industrial and commercial cold, displays, electric panels, etc. AKO-10223 *8 A 1 2 *8 A 3 6 N R2 7 *16 A 8 9 N LIGHT 10 11 12 N COOL N L 230 V~ 13 14 15 16 17 18 DI1 S1 - TEM DI2 S2 - DEF • Temperature range -50ºC to +99ºC • Display 3 Digits (ºC/ºF) • Resolution 0.1ºC • Accuracy ±1 ºC • NTC probe • Panel cut-out dimensions 150 x 31 mm • Box dimensions 149 x 30 x 57.7 mm • Trim 179.9 x 37.9 mm • Compressor relay SPST 16A, 250V, cosϕ=1 • Relay R2 SPDT 8A, 250V, cosϕ=1 • Light relay SPDT 8A, 250V, cosϕ=1 • Power supply 230V~ ±10%, 50/60Hz Reference Description Family Pack AKO-10223 Controller 3 relays, 230V~, 1 NTC probe included 1510 10 Units 21 AKOCONTROL Large frontal temperature controllers 4 relays, panel mounting Compressor relay, defrost, fans and light. 6 keys: Up, Down, Set, Escape, Light and ON/OFF. Pushbutton to turn the unit on and off and light switch. Defrost by electric heat or by air and possible continuous cycle. Password enabled for entering programming, programme-selectable indication in ºC or ºF. Digital input configurable for door contact, severe alarm, remote defrost, adjustment temperature change. Application: Industrial and commercial cold, displays, electric panels, etc. • Temperature range -50ºC to +99ºC • Display 3 Digits (ºC/ºF) AKO-10323 *8 A 1 2 *8 A 3 4 N DEF 5 *8 A 6 N FAN 7 *16 A 8 9 N LIGHT 10 11 12 N COOL N L 230 V~ 13 14 15 16 17 18 DI1 S1 - TEM DI2 S2 - DEF • Resolution 0.1ºC • Accuracy ±1 ºC • NTC probe • Panel cut-out dimensions 150 x 31 mm • Box dimensions 149 x 30 x 57.7 mm • Trim 179.9 x 37.9 mm • Compressor relay SPST 16A, 250V, cosϕ=1 • Fan relays SPST 8A, 250V, cosϕ=1 • Defrost relay SPDT 8A, 250V, cosϕ =1 • Light relay SPDT 8A, 250V, cosϕ=1 • Power supply 230V~ ±10%, 50/60Hz Reference Description Family Pack AKO-10323 Controller 4 relays, 230V~, 1 NTC probe included 1510 10 Units Thermometers Range from -50ºC to +70ºC, panel mounting Battery thermometers. Temperature display in cold and heat applications. Application: Industrial and commercial cold, displays. • Temperature range from -50ºC to +70ºC • Display LCD • Resolution 0.1ºC • Accuracy ±1ºC • Power supply: 1.5V battery (G10) • Size of the AKO-80025 48 x 28.6 x 14 mm. • Size of the AKO-80032 85.2 x 29.2 x 14.8 mm. AKO-80032 AKO-80025 Reference Description Family Pack AKO-80025 AKO-80032 1.5V Batteries (G10), probe 3 m Solar power supply + 1.5V batteries (G10), probe 3 m 1510 1510 25 Units 25 Units 22 www.ako.com AKOCONTROL Temperature controllers Range from -99.9ºC to +1370ºC, 48 x 48 format Input for Pt100 probe, J and K thermocouple. ON/OFF Control. Programmable for cold and heat. With the 2 outputs, the controller can be used to work as a stage plus alarm. Application: Ovens, electrical panels, industrial installations, etc. • Temperature range with Pt100 probe -99.9ºC to +850.0ºC • Temperature range with J thermocouple -99.9ºC to +800.0ºC L 1 N 2 18 17 16 15 14 TOP 3 R2 13 R1 4 12 5 11 Pt100 + TC 6 + SALIDA ENTRADA SSR DIGITAL Reference AKO-15440 AKO-15490 7 8 • Temperature range with K thermocouple -99.9ºC to +1370ºC • Resolution 0.1 ºC • Accuracy ±1 ºC • Display 4 Digits (ºC/ºF) • Output control SSR 12Vdc, max. 10mA • Front part dimensions 48 x 48 mm • Panel cut-out dimensions 45 x 45 mm • Depth 119 mm • Relay R1 SPST 6 A, 250V, cosϕ= 1 • Relay R2 SPDT 5 A, 250V, cosϕ= 1 10 9 Description _ ON/OFF controller with power supply from 20 to 48V~ ON/OFF controller with power supply from 100 to 240V~ Family Pack 1535 1535 1 Unit 1 Unit PID controller, 48 x 48 format Range from -99.9ºC to +1370ºC Input for Pt100 probe, Thermocouple J and K, 4-20mA Programmable for cold and heat. Controller PID or ON/OFF programme-selectable. Self-tuning function. Probe input configurable as Pt100, thermocouple J and K, 4-20mA. With the 2 outputs, the controller can be used to work as a stage plus alarm. Digital input configurable for SetPoint change or start-stop of the unit. Application: Ovens, electrical panels, industrial installations, etc. • Temperature range with Pt100 probe -99.9ºC to +850.0ºC • Temperature range with J thermocouple -99.9ºC to +800.0ºC L 1 N 2 18 17 16 15 14 TOP 3 R2 13 R1 4 12 5 11 Pt100 + TC + 6 SALIDA ENTRADA SSR DIGITAL Reference AKO-15400 AKO-15450 Description 7 8 9 10 _ Controller with power supply from 20 to 48V~ Controller with power supply from 100 to 240V~ 4-20mA + R=2.49 Ω • Temperature range with K thermocouple -99.9ºC to +1370ºC • Temperature range with 4-20mA -999ºC to +2500ºC • Resolution 0.1ºC • Accuracy ±1 ºC • Display 4 Digits (ºC/ºF) • Output control SSR 12Vdc, max. 10mA • Front part dimensions 48 x 48 mm • Panel cut-out dimensions 45 x 45 mm • Depth 119 mm • Relay R1 SPST 6A, 250V, cosϕ=1 • Relay R2 SPDT 5A, 250V, cosϕ=1 Family Pack 1535 1535 1 Unit 1 Unit 23 AKOCONTROL PID controller, 48 x 48 format Range from -99.9ºC to +1370ºC, 4-20mA/0-10V output With 4-20mA/0-10V output. Programmable for cold and heat. Controller PID or ON/OFF programme-selectable. Self-tuning function. Probe input configurable as Pt100, thermocouple J and K, 4-20mA. With the 2 outputs, the controller can be used to work as a stage plus alarm. With the 4-20mA/0-10V output option, we have an analogue output to govern a valve or to resend the signal to a variator or PLC. With the RS-485 communication option, the unit can be connected to a network working with ModBus protocol. Application: Ovens, electrical panels, industrial installations, etc. 4-20 mA R<390 Ω 0-10V M DULO SALIDA 4-20 mA / 0-10 V + GND + L 1 N 2 18 17 16 15 14 TOP 3 R2 13 R1 4 12 5 11 4-20 mA + R=2.49 Ω Pt100 + TC + SALIDA ENTRADA SSR DIGITAL 6 7 8 9 B GND 10 M DULO COMUNICACI N RS485 A Reference • Temperature range with Pt100 probe -99.9ºC to +850.0ºC • Temperature range with J thermocouple -99.9ºC to +800.0ºC • Temperature range with K thermocouple -99.9ºC to +1370ºC • Temperature range with 4-20mA -999ºC to +2500ºC Description _ 20 to 48V~, with 4-20mA output _ 20 to 48V~, with 4-20mA output and communication 100 to 240V~, with 4-20mA output 100 to 240V~, with 4-20mA output and communication AKO-15430 AKO-15437 AKO-15480 AKO-15487 • Resolution 0.1 ºC • Accuracy ±1 ºC • Display 4 Digits (ºC/ºF) • Output control SSR 12Vdc, maximum 10mA • Front part dimensions 48 x 48 mm • Panel cut-out dimensions 45 x 45 mm • Depth 119 mm • Relay R1 SPST 6 A, 250V, cosϕ= 1 • Relay R2 SPDT 5 A, 250V, cosϕ= 1 Family Pack 1535 1535 1535 1535 1 Unit * 1 Unit * 1 Unit 1 Unit * Available on request PID controller, 48 x 48 format Range from -99.9ºC to +1370ºC, 3 relays With additional relay output. Programmable for cold and heat. Controller PID or ON/OFF programme-selectable. Self-tuning function. Probe input configurable as Pt100, thermocouple J and K, 4-20mA. Digital input configurable for SetPoint change or start-stop of the unit. With the 3 outputs, the controller can operate as a two stage, a neutral zone, with alarm signalling. With the 4-20mA/0-10V output option, we have an analogue output to govern a valve or to resend the signal to a variator or PLC. With the option of an input for current transformer (C.T.) the breakage of the heating resistance can be detected. 4-20 mA R<390 Ω 0-10V M DULO SALIDA 4-20 mA / 0-10 V Application: Ovens, electrical panels, industrial installations, etc. M DULO CT TRANSFORMADOR DE CORRIENTE • Temperature range with Pt100 probe -99.9ºC to +850.0ºC • Temperature range with J thermocouple -99.9ºC to +800.0ºC • Temperature range with K thermocouple -99.9ºC to +1370ºC • Temperature range with 4-20mA -999ºC to +2500ºC • Resolution 0.1ºC + GND + ~ L 1 N 2 18 17 16 15 14 TOP 3 R2 13 R1 4 12 5 11 Pt100 + TC + SALIDA ENTRADA SSR DIGITAL 6 7 8 9 10 4-20 mA + R=2.49 Ω REL R3 Reference AKO-15410 AKO-15413 AKO-15415 AKO-15460 AKO-15463 AKO-15465 AKO-80033 * Available on request 24 Description _ 20 to 48V~, relay 3 SPDT 5A _ 20 to 48V~, relay 3 SPDT 5A, with 4-20mA output _ 20 to 48V~, relay 3 SPDT 5A, with input for C.T. 100 to 240V~, relay 3 SPDT 5A 100 to 240V~, relay 3 SPDT 5A, with 4-20mA output 100 to 240V~, relay 3 SPDT 5A, with input for C.T. Current transformer (CT) 25A/0.05A • Accuracy ±1 ºC • Display 4 Digits (ºC/ºF) • Output control SSR 12Vdc, maximum 10mA • Front part dimensions 48 x 48 mm • Panel cut-out dimensions 45 x 45 mm • Depth 119 mm • Relay R1 SPST 6 A, 250V, cosϕ= 1 • Relay R2 SPDT 5A, 250V, cosϕ= 1 • Relay R3 SPST 5 A, 250V, cosϕ= 1 Family 1535 1535 1535 1535 1535 1535 1590 Pack 1 1 1 1 1 1 25 Unit * Unit * Unit * Unit Unit Unit * Units www.ako.com AKOCONTROL PID controller, 48 x 48 format with RS485 communication Communication and input for current transformer Programmable for cold and heat. Controller PID or ON/OFF programme-selectable. Self-tuning function. Probe input configurable as Pt100, thermocouple J and K, 4-20mA. With the 2 outputs, the controller can be used to work as a stage plus alarm. With the option of an input for current transformer (C.T.) the breakage of the heating resistance can be detected. With the RS-485 communication option, the unit can be connected to a network working with ModBus protocol. Application: Ovens, electrical panels, industrial installations, etc. M DULO CT TRANSFORMADOR DE CORRIENTE ~ L 1 N 2 18 17 16 15 14 TOP 3 R2 13 R1 4 12 5 11 Pt100 + TC + SALIDA ENTRADA SSR DIGITAL 6 7 8 9 GND B A Reference AKO-15401 AKO-15402 AKO-15403 AKO-15451 AKO-15452 AKO-15453 AKO-80033 10 4-20 mA + R=2.49 Ω M DULO COMUNICACI N RS485 • Temperature range with Pt100 probe -99.9ºC to +850.0ºC • Temperature range with J thermocouple 99.9ºC to +800.0ºC • Temperature range with K thermocouple 99.9ºC to +1370ºC • Temperature range with 4-20mA -999ºC to +2500ºC • Resolution 0.1ºC / Accuracy ±1ºC Description _ 20 to 48V~, with input for C.T. _ 20 to 48V~, with communication _ 20 to 48V~, with input for C.T. and communication 100 to 240V~, with input for C.T. 100 to 240V~, with communication 100 to 240V~, with input for C.T. and communication Intensity transformer (CT) 25A/0.05A • Display 4 Digits (ºC/ºF) • Output control SSR 12Vdc, maximum 10mA • Front part dimensions 48 x 48 mm • Panel cut-out dimensions 45 x 45 mm • Depth 119 mm • Relay R1 SPST 6 A, 250V, cosϕ=1 • Relay R2 SPDT 5 A, 250V, cosϕ=1 Family 1535 1535 1535 1535 1535 1535 1590 Pack 1 Unit * 1 Unit * 1 Unit * 1 Unit * 1 Unit 1 Unit * 25 Units * Available on request Input controllers 4/20mA Range from -999 to +999. 2 relays, panel mounting 2 control relays. Programmable for direct and inverse operation. With 2 relay outputs, the controller can be used to work as 2 independent stages, 2 related stages, neutral zone and 1 stage plus alarm. It has 1 digital input for remote change of the SetPoint Application: Fryers, electric panels, industrial installations, sewage treatment plants, etc. • Measurement range -999 to +999 • 3-digit display • Resolution 0.1 • Accuracy ±1 % • Probe type 4-20mA • Panel cut-out dimensions 70.5 x 28.5 mm • Front part dimensions 75.8 x 33.8 mm • Depth 61 mm • Control relays SPDT 8A, 250V, cosϕ= 1 Reference Description Family Pack AKO-14532 AKO-14534 AKO-80013 AKO-80040 230V~, 2 relays SPDT 8A 120V~, 2 relays SPDT 8A Wall humidity probe, 10 to 95%, -5/50ºC, output 4-20mA Tubular humidity probe, 5 to 95%, -10/70ºC, output 4-20mA 1510 1510 1590 1590 12 Units 12 Units 1 Unit 1 Unit 25 AKOCONTROL Temperature controllers Range from -99.9ºC to +1000ºC, 2 relays, panel mounting Input for Pt100, NTC, PTC probes, J and K thermocouple. Programmable for cold and heat. With the 2 relay outputs, the controller can be used to work as 2 independent stages, 2 related stages, neutral zone and one stage plus alarm. Digital input for SetPoint change. Application: Ovens, electric panels, industrial installations, incubators, etc. • Temperature range with Pt100 probe -100ºC to +440ºC • Temperature range with NTC probe -50ºC to +100ºC • Temperature range with PTC probe -50ºC to +150ºC Reference AKO-14724 AKO-14725 AKO-14726 Description _ 12V~, for panel cut-out 70.5 x 28.5 mm 120V~, for panel cut-out 70.5 x 28.5 mm 230V~, for panel cut-out 70.5 x 28.5 mm • Temperature range with J thermocouple 0ºC to +600ºC • Temperature range with K thermocouple 0ºC to +1000ºC • Resolution 0.1ºC (1ºC for J, K thermocouples) • Accuracy ±1 ºC (±2ºC for J, K thermocouples) • Display 3 Digits (ºC/ºF) • Panel cut-out dimensions 70.5 x 33.8 mm • Front part dimensions 75.8 x 33.8 mm • Depth 61 mm • Control relays 2 SPDT 8A, 250V, cosϕ=1 Family Pack 1530 1530 1530 12 Units 12 Units 12 Units Temperature controllers Range from -50.0ºC to +600ºC, 2 relays, panel mounting Pt100 probe input. Programmable for cold and heat. With the 2 relay outputs, the controller can be used to work as 2 independent stages or neutral zone Application: Ovens, electrical panels, industrial installations, etc. • Temperature range -50ºC to +600ºC • Display 3 Digits (ºC/ºF) • Resolution 1ºC • Accuracy ±0.5 ºC • Probe type Pt100 • Panel cut-out dimensions 70.5 x 28.5 mm • Front part dimensions 75.8 x 33.8 mm • Depth 61 mm • Control relays 2 SPDT 8A, 250V, cosϕ= 1 _ • Power supply 12V~ ±15%, 50/60Hz Reference AKO-14721 26 Description _ 12V~, for Pt-100 probe no included Family Pack 1530 12 Units www.ako.com AKOCONTROL Temperature controllers Range from -99.9ºC to +1000ºC, 2 relays, DIN rail mounting Input for Pt100, NTC, PTC probes, J and K thermocouple. With the 2 relay outputs, the controller can be used to work as 2 independent stages, 2 related stages, neutral zone and one stage plus alarm. Digital input for SetPoint change. Application: Ovens, electric panels, industrial installations, incubators, etc. • Temperature range with Pt100 probe -100ºC to +440ºC • Temperature range with NTC probe -50ºC to +100ºC • Temperature range with PTC probe -50ºC to +100ºC Reference AKO-15227 AKO-15225 AKO-15226 • Temperature range with J thermocouple 0ºC to +600ºC • Temperature range with K thermocouple 0ºC to +1000ºC • Display 3 Digits (ºC/ºF) • Resolution 0.1ºC (1ºC for J, K thermocouples) • Accuracy ±1 ºC (±2ºC for J, K thermocouples) • Probe type Pt100, NTC, PTC, J and K thermocouples) • Box dimensions 70 x 90 x 58 mm (4 DIN modules) • Front part dimensions 42.2 x 66.2 mm • Control relays 2 SPDT 8A, 250V, cosϕ=1 Description _ 24V~, for DIN rail 4 modules, 70 x 58 x 90 mm 120V~, for DIN rail 4 modules, 70 x 58 x 90 mm 230V~, for DIN rail 4 modules, 70 x 58 x 90 mm Family Pack 1530 1530 1530 6 Units 6 Units 6 Units Solar energy controllers Differential thermostat 2 relays, wall mounting Pump controls, support resistance or air-thermal. Input for 2 probes. Probe 1 configurable as NTC or PTC, probe 2 NTC. De-icing function. Second relay programmable as air-thermal regulating function to limit the temperature in the solar panel or thermostat function for the support resistance in the accumulator. Parameter protection by password. Test pushbuttons. Low consumption. Fixing holes adapted to universal embedding box. PUMP Application: Thermal solar energy installations • With NTC probe, temperature range from -50.0ºC to +99.9ºC • With PTC probe, temperature range from -50.0ºC to +150ºC • Display 3 Digits (ºC/ºF) • Resolution 0.1ºC • Accuracy ±1 ºC • Box dimensions 171 x 94 x 42 mm • Pump relay SPST 16A, 250V, cosϕ= 1 • Relay R2 SPDT 8A, 250V, cosϕ= 1 • Power supply 230V~ ±10%, 50/60 Hz Reference Description Family Pack AKO-14801 Controller 230V~, 2 relays, 1 NTC probe included 1530 10 Units 27 AKOCONTROL Solar energy controllers Panel differential thermostat Panel format for integration in panel. Input for 2 NTC probes. De-icing function. Pump stop for excessive temperature in probe 2. Low consumption. PUMP Application: Solar thermal energy installations • Temperature range from -50.0ºC to +99.9ºC • Resolution 1ºC • Accuracy ±1 ºC • Panel cut-out dimensions 70.5 x 28.5 mm • Front part dimensions 75.8 x 33.8 mm • Depth 61 mm • Pump relay SPST 16A, 250V, cosϕ= 1 • Power supply 230V~ ±10%, 50/60 Hz Reference Description Family Pack AKO-14327 Controller 230V~, 1 relay, 1 NTC probe included 1530 10 Units Solar energy controllers Differential thermostat, DIN rail mounting (4 modules) DIN rail format for panel integration. Input for 2 NTC probes. De-icing function. Pump stop for excessive temperature in probe 2. Low consumption. PUMP Application: Thermal solar energy installations • Temperature range -50ºC to +99ºC • Display 3 Digits (ºC/ºF) • Resolution 0.1ºC • Accuracy ±1 ºC • NTC probe • Box dimensions 70 x 90 x 58 mm (4 DIN modules) • Front part dimensions 42.2 x 66.2 mm • Pump relay SPST 16A, 250V, cosϕ= 1 • Power supply 230V~ ±10%,50/60 Hz Reference Description Family Pack AKO-15224 Controller 230V~, 1 relay, 1 NTC probe included 1530 6 Units 28 www.ako.com AKOCONTROL Temperature controllers 2 relays, up to 2 probes, panel mounting Multifunction. The two probe inputs may be linked with the relay outputs for the functions of thermometer and thermostat in cold and heat applications, as a differential control of the two probes, double thermostat, two stages, neutral zone, etc. The configuration of the menus means that certain parameters may or may not be adjusted by the user, so that they might exclusively have the information and adjustment that the use of the machine requires. It is possible to modify the functions of the keys on the front and the temperature display. The configuration may be blocked by password. Application: Solar energy, electric panels, industrial installations, etc • Temperature range -50ºC to +100ºC • Display 3 Digits (ºC/ºF) Reference AKO-14722 AKO-14723 Description _ 12V~, for panel cut-out 70.5 x 28.5 mm 230V~, for panel cut-out 70.5 x 28.5 mm • Resolution 0.1ºC • Accuracy ±1 ºC • Type of NTC probe (1 included) • Panel cut-out dimensions 70.5 x 28.5 mm • Front part dimensions 75.8 x 33.8 mm • Depth 61 mm • Control relay R1 1 SPST 16A, 250V, cosϕ=1 • Control relay R2 1 SPDT 8A, 250V, cosϕ=1 Family Pack 1530 1530 12 Units 12 Units Temperature controllers 2 relays, up to 2 probes, DIN rail mounting Multifunction The two probe inputs may be linked with the relay outputs for the functions of thermometer and thermostat in cold and heat applications, as a differential control of the two probes, double thermostat, two stages, neutral zone, etc. The configuration of the menus means that certain parameters may or may not be adjusted by the user, so that they might exclusively have the information and adjustment that the use of the machine requires. It is possible to modify the functions of the keys on the front and the temperature display. The configuration may be blocked by password. Application: Solar energy, electric panels, industrial installations, etc • Temperature range -50ºC to +100ºC • Display 3 Digits (ºC/ºF) • Resolution 0.1 ºC • Accuracy ±1 ºC • Type of NTC probe (1 included) • Box dimensions 70 x 90 x 58mm (4 DIN modules) • Front part dimensions 42.2 x 66.2 mm • Control relay R1 1 SPST 16A, 250V, cosϕ=1 • Control relay R2 1 SPDT 8A, 250V, cosϕ=1 • Power supply 230V~ ±10%, 50/60Hz Reference Description Family Pack AKO-15223 230V~, for DIN rail 1530 6 Units 29 AKOCONTROL Modular controllers AKOTIM Range from -50ºC to +99ºC, 1 relay, panel mounting Compressor control relay. Used to regulate the temperature of cold generators and to display the information from the operation log on, the refrigeration time, the defrost time and the complete cycle. They store information on the maximum and minimum temperatures reached, in addition to other useful parameters to the HACCP. Programme-selectable indication in ºC or ºF. 2 inputs for control probe and independent temperature. Digital input for door contact. Defrost by compressor stop. Application: Industrial and commercial cold, displays, electrical panels, etc. • Temperature range -50ºC to +99ºC • Display 3 Digits (ºC/ºF) Reference AKOTIM-11TE AKOTIM-11ATE AKOTIM-11ARTE AKOTIM-11ARTEB • Resolution 0.1ºC • Accuracy ±1 ºC • NTC probe • Front part dimensions 75.8 x 33.8 mm • Panel cut-out dimensions 70.5 x 28.5 mm • Depth 61 mm • Compressor relay SPST 16A, 250V, cosϕ= 1 • Power supply 230V~ ±10%, 50/60 Hz Alarm relay Real time clock Buzzer Family Pack Yes Yes Yes Yes Yes Yes 1520 1520 1520 1520 12 Units 12 Units 12 Units 12 Units Modular controllers AKOTIM Range from -50ºC to +99ºC, 2 relays, panel mounting Compressor relay and R2 (defrost or fans). Used to regulate the temperature of cold generators and to display the information from the operation log on, the refrigeration time, the defrost time and the complete cycle. They store information on the maximum and minimum temperatures reached, in addition to other parameters of use to the HACCP 3 inputs for regulating probe, evaporator and independent temperature. Digital input for door contact. Defrost by electric heat or air. Programme-selectable indication in ºC or ºF. Application: Industrial and commercial cold, displays, electrical panels, etc. • Temperature range -50ºC to +99ºC • Display 3 Digits (ºC/ºF) Reference AKOTIM-12TE AKOTIM-12ATE AKOTIM-12ARTE AKOTIM-12ARTEB 30 • Resolution 0.1 ºC • Accuracy ±1 ºC • NTC probe • Front part dimensions 75.8 x 33.8 mm • Panel cut-out dimensions 70.5 x 28.5 mm • Depth 61 mm • Compressor relay SPST 16A, 250V, cosϕ = 1 • Relay R2 SPDT 8A, 250V, cosϕ= 1 • Power supply 230V~ ±10%,50/60 Hz Alarm relay Real time clock Buzzer Family Pack Yes Yes Yes Yes Yes Yes 1520 1520 1520 1520 12 Units 12 Units 12 Units 12 Units www.ako.com AKOCONTROL Modular controllers AKOTIM Range from -50ºC to +99ºC, 3 relays, panel mounting Relay for compressor, fans and defrost. Used to regulate the temperature of cold generators and to display the information from the operation log on, the refrigeration time, the defrost time and the complete cycle. They store information on the maximum and minimum temperatures reached, in addition to other useful parameters to the HACCP. Programme-selectable indication in ºC or ºF. 2 inputs for control probe and independent temperature. Digital input for door contact. Defrost by electric heat, air or hot gas bypass Application: Industrial and commercial cold, displays, electrical panels, etc. • Temperature range -50ºC to +99ºC • Display 3 Digits (ºC/ºF) Reference AKOTIM-13TE AKOTIM-13ATE AKOTIM-13ARTE AKOTIM-13ARTEB • Resolution 0.1ºC • Accuracy ±1 ºC • NTC probe • Front part dimensions 75.8 x 33.8 mm • Panel cut-out dimensions 70.5 x 28.5 mm • Depth 61 mm • Compressor relay SPST 16A, 250V, cosϕ= 1 • Fan relays SPST 5A, 250V, cosϕ= 1 • Defrost relay SPDT 8A, 250V, cosϕ= 1 • Power supply 230V~ ±10%,50/60 Hz Alarm relay Real time clock Buzzer Family Pack Yes Yes Yes Yes Yes Yes 1520 1520 1520 1520 12 Units 12 Units 12 Units 12 Units Modular controllers AKOTIM Range from -50ºC to +99ºC, 1 relay, DIN rail mounting Compressor control relay Used to regulate the temperature of cold generators and to display the information from the operation log on, the refrigeration time, the defrost time and the complete cycle. They store information on the maximum and minimum temperatures reached, in addition to other useful parameters to the HACCP Programme-selectable indication in ºC or ºF. 2 inputs for control probe and independent temperature. Digital input for door contact. Defrost by compressor stop. Application: Industrial and commercial cold, displays, electrical panels, etc. • Temperature range -50ºC to +99ºC • Display 3 Digits (ºC/ºF) Reference AKOTIM-21TE AKOTIM-21ATE AKOTIM-21ARTE AKOTIM-21ARTEB • Resolution 0.1 ºC • Accuracy ±1 ºC • NTC probe • Box dimensions 70 x 90 x 58 mm (4 DIN modules) • Front part dimensions 42.2 x 66.2 mm • Compressor relay SPST 16A, 250V, cosϕ =1 • Power supply 230V~ ±10%,50/60 Hz Alarm relay Real time clock Buzzer Family Pack Yes Yes Yes Yes Yes Yes 1520 1520 1520 1520 6 Units 6 Units 6 Units 6 Units 31 AKOCONTROL Modular controllers AKOTIM Range from -50ºC to +99ºC, 2 relays, DIN rail mounting Compressor relay and R2 (defrost or fans). Used to regulate the temperature of cold generators and to display the information from the operation log on, the refrigeration time, the defrost time and the complete cycle. They store information on the maximum and minimum temperatures reached, in addition to other useful parameters to the HACCP. 3 inputs for regulating probe, evaporator and independent temperature. Digital input for door contact. Defrost by electric heat or air. Programme-selectable indication in ºC or ºF. Application: Industrial and commercial cold, displays, electrical panels, etc. • Temperature range -50ºC to +99ºC • Display 3 Digits (ºC/ºF) Reference AKOTIM-22TE AKOTIM-22ATE AKOTIM-22ARTE AKOTIM-22ARTEB • Resolution 0.1 ºC • Accuracy ±1 ºC • NTC probe • Box dimensions 70 x 90 x 58 mm (4 DIN modules) • Front part dimensions 42.2 x 66.2 mm • Compressor relay SPST 16A, 250V, cosϕ = 1 • Relay R2 SPDT 8A, 250V, cosϕ= 1 • Power supply 230V~ ±10%,50/60 Hz Alarm relay Real time clock Buzzer Family Pack Yes Yes Yes Yes Yes Yes 1520 1520 1520 1520 6 Units 6 Units 6 Units 6 Units Modular controllers AKOTIM Range from -50ºC to +99ºC, 3 relays, DIN rail mounting Relay for compressor, fans and defrost. Used to regulate the temperature of cold generators and to display the information from the operation log on, the refrigeration time, the defrost time and the complete cycle. They store information on the maximum and minimum temperatures reached, in addition to other useful parameters to the HACCP. Programme-selectable indication in ºC or ºF. 2 inputs for control probe and independent temperature. Digital input for door contact. Defrost by electric heat, air or hot gas bypass. Application: Industrial and commercial cold, displays, electrical panels, etc. • Temperature range -50ºC to +99ºC • Display 3 Digits (ºC/ºF) Reference AKOTIM-23TE AKOTIM-23ATE AKOTIM-23ARTE AKOTIM-23ARTEB 32 • Resolution 0.1 ºC • Accuracy ±1 ºC • NTC probe • Box dimensions 70 x 90 x 58 mm (4 DIN modules) • Front part dimensions 42.2 x 66.2 mm • Compressor relay SPST 16A, 250V, cosϕ = 1 • Fan relay SPST 5A, 250V, cosϕ= 1 • Defrost relay SPDT 8A, 250V, cosϕ = 1 • Power supply 230V~ ±10%,50/60 Hz Alarm relay Real time clock Buzzer Family Pack Yes Yes Yes Yes Yes Yes 1520 1520 1520 1520 6 Units 12 Units 12 Units 12 Units www.ako.com AKOCONTROL Compressors and condensers station up to 4 stages Operating modes, proportional band and neutral zone. 4-stage controller for compressors or condensers. Compressor rotation by operating hours. Probe reading configurable by pressure or temperature probe. 5 relay outputs: 4 control outputs and 1 alarm output. Also with 6 digital inputs, 4 for the compressor protection thermal switches, 1 for high pressure switch and 1 for low pressure switch. Application: Cold installations _ • Power supply 12V~ ±20%, 50/60Hz • 4 Control relays SPST 2A, 250V, cosϕ= 1 • 1 Alarm relay SPDT 2A, 250V, cosϕ= 1 • Panel cut-out dimensions 70.5 x 28.5 mm • Front part dimensions 75.8 x 33.8 mm • Depth 61 mm • 3-digit display • Accuracy ±1 • Resolution (4-20mA) 0.01 • Resolution (NTC) 0.1 ºC • Scale with input 4-20mA -99.9 to +99.9 • Temperature range (NTC) -50ºC to +99ºC • NTC or 4-20mA probe Reference Description Family Pack AKO-14540 AKO-15590 AKODUO 4 stages Transformer 120-230V/12V 1560 1590 1 Unit 12 Units Temperature controllers Wine thermostat Control designed for wine cellars. The two probe inputs may be linked with the two relay outputs for the thermometer, thermostats and timer applications in cold and heat installations. The second timed relay may be used for the timing. 2 operating modes: - Temperature control (cold or heat) and timing. - Neutral zone control. Timing frequency up to 24 hours. Connector for RS485 module to PC. Second probe for display or alarm. Application: Wine installations • Temperature range -50ºC to +100ºC • Display 3 Digits (ºC/ºF) • Resolution 0.1ºC • Accuracy ±1 ºC • Type of NTC probe (1 included) • Panel cut-out dimensions 70.5 x 28.5 mm • Front part dimensions 75.8 x 33.8 mm • Depth 61 mm • Control relay R1 1 SPST 16A, 250V, cosϕ= 1 • Control relay R2 1 SPDT 8A, 250V, cosϕ= 1 Reference Description Family Pack AKO-14723/01 230V~, for panel cut-out 70.5 x 28.5 mm 1530 12 Units 33 AKOCONTROL Temperature controllers Range from -50.0ºC to +350.0ºC, 1 relay in IP65 box Suitable for outdoors. It is designed to regulate the temperature of pipes, tanks, valves, processing equipment, etc. that require local control and are installed outdoors or in aggressive atmospheres, either due to dirt, humidity, corrosion, etc. Application: Industrial installations, agricultural, etc. • Temperature range -50ºC to +350ºC • Display 3 Digits (ºC/ºF) • Resolution 0.1ºC • Accuracy ±0.5 ºC • Probe type Pt100 • Box dimensions 120 x 160 x 66 mm • Working temperature -30ºC to +60ºC • IP65 protection • Control relay SPST 20A, 250V, cosϕ=1 • Power supply 230V~ ±10%, 50/60Hz Reference Description Family Pack AKO-1530 AKO-717425 AKO-15595 AKO-15596 Thermostat up to 350ºC, relay 20A SPST, without the probe Thermostat to pipe fixing support Pt-100 probe, from -50 to 200ºC, 1.5 m of cable with braid Pt-100 probe, from -200 to 600ºC, in bracket 100 x 230 mm 1530 2190 1590 1590 5 Units 1 Unit 5 Units 1 Unit Temperature controllers Energy controller Energy saving. A controller designed to adjust the energy contribution from heating cables or other heat sources, in applications in which it must vary in line with the ambient temperature. Its use is particularly suitable in system where, once designed and applied, the only variable that influences in the system is the ambient temperature. Application: Electric traces, avoid freezing on ramps, terraces, etc. • Temperature range -40ºC to +200ºC • Display 3 Digits (ºC/ºF) • Resolution 0.1ºC • Accuracy ±0.5 ºC • Probe type Pt100 • Box dimensions 120 x 160 x 66 mm • IP65 protection • Control relay SPST 10A, 250V, cosϕ= 1 • Power supply 230V~ ±10%, 50/60Hz Reference Description Family Pack AKO-15301A AKO-15599 Energy regulator ambient temperature function, 10A relay Pt-100 probe for ambient temperature 1530 1590 1 Units 1 Units 34 www.ako.com AKOCONTROL Electric Heat Tracing Control EEx ed IIC T5 Electric Heat Tracing Control is approved for use in Zone 1 and 2 classified area’s. It is designed for use as adjustable control thermostats for freeze protection and temperature maintenance applications requiring pipewall or tankwall sensing. Each thermostat is available in four temperature control and bulb exposure temperature ranges. It is designed to be wall-mounted (or pipe-mounted using XP1 stainless steel mounting bracket and has a PVC coated galvanised steel flexible capillary armouring complete with capillary gland and insulation entry device. It includes an expediter to facilitate attaching the thermostat directly on the pipe and permits two heating cables to enter and be connected within the enclosure. Application: Electric traces • Temperature range from 0ºC to +200ºC • Maximum pipe exposure temperature +230°C • Operating ambient temp. -45°C to +55°C • Differential 5ºC approx. • Switch rating 16A • Junction box with M25 • Enclosure rating IP66 • Bulb and capillary stainless steel Reference Description Family Pack AKO-71658 AKO-71659 AKO-71660 AKO-71661 Electric heat tracing control EEx ed 0 to 200ºC, pipe, for 7126x and 71219 Electric heat tracing control EEx ed 0 to 200ºC, wall, for 7126x and 71219 Electric heat tracing control EEx ed 0 to 200ºC, pipe, for 7121x, 7124x, 7125x Electric heat tracing control EEx ed 0 to 200ºC, wall, for 7121x, 7124x, 7125x 1530 1530 1530 1530 1 Unit 1 Unit 1 Unit 1 Unit Temperature controllers Ice and snow centre Guaranteeing energy savings of 80% with respect to control by means of thermostats. This ice control centre is used in automatic heating installations for open spaces. With this system, the heating comes on only if there is a chance of freezing, for example, snow, ice or sleet and automatically turns off after thawing. Application: To avoid ice on ramps, terraces, roofs, guttering, etc. • Measurement of temperature, humidity, ice and snow • Ground temperature range -40ºC to +70ºC • Programme after heat from 10 min to 120 min • Consumption meter in hours Reference Description Family Pack AKO-80015 AKO-80016 AKO-80020 AKO-80030 AKO-80031 Ice and snow centre Temp. and humidity probe for ramps, streets, pavements and terraces Ice and snow probe for ramps, streets, pavements and terraces Ice and snow ramp for roofs and guttering Temperature probe for roofs and guttering 1590 1590 1590 1590 1590 1 Unit 1 Unit 1 Unit 1 Unit 1 Unit 35 AKOCONTROL Temperature controllers Thermostats for lifts DIN rail mounting. They are used to comply with the directive 95/16/EC in lift machinery rooms. Minimum alarm level adjusted to +5ºC and maximum alarm to +40ºC. 3 indication leds: Maximum, minimum alarm and temperature OK. Includes an NTC probe with 1.5 m of cable Application: Lifts • Relay connected between 5ºC and 40ºC • Accuracy ±5ºC • NTC probe • Box dimensions 18 x 90 x 58 mm (1 DIN module) • Depth 61 mm • Relay SPDT 8A, 24V, cosϕ= 1 _ • Power supply voltage 24 V~ ± 20%, 50/60Hz Reference AKO-54301 Description _ 24V~, DIN rail mounting, temp. fixed min. 5ºC max. 40ºC Probes and accessories Accessories AKO-14910 Family Pack 1530 12 Units AKO-155908 AKO-15586 AKO-80004A Reference Description Family AKO-14910 AKO-15586 AKO-155908 AKO-80004A Transparent lid for front protection Metre of cable for extending probes Stainless steel sheath, 1/2” Gas thread Converter from Pt-100 to 4-20 mA 1590 1590 1590 1590 (A) The metres of packaged material are the standard ones; however, we reserve the right to supply in different lengths those indicated. (B) Minimum, indivisible pack units. 36 Pack 120 Units (B) 100 m (A) 1 Unit 1 Unit www.ako.com AKOCONTROL Probes and accessories Temperature probes Reference Description Family AKO-14901 AKO-14902 AKO-14903 AKO-14906 AKO-14915 AKO-15561 AKO-155801 AKO-155802 AKO-155803 AKO-155807 AKO-155815 AKO-155830 AKO-15584 AKO-15585A AKO-15595 AKO-15587 AKO-15596 AKO-15597 AKO-15599 AKO-15601 AKO-15602 AKO-15586 AKO-80008 AKO-80019 AKO-15582 NTC probe, from–50 to 100ºC, 1.5 m of cable NTC probe, from–50 to 100ºC, 2.0 m of cable NTC probe, from–50 to 100ºC, 3.0 m of cable NTC probe, from–50 to 100ºC, 6.0 m of cable NTC probe, from–50 to 100ºC, stainless steel connector, 3.0 m of cable NTC probe, from–50 to 100ºC, IP68 protection, AISI 304. 1.5 m of cable PTC probe, from–50 to 150ºC, 1.5 m of cable PTC probe, from–50 to 150ºC, 2.0 m of cable PTC probe, from–50 to 150ºC, 3.0 m of cable PTC probe, from–50 to 150ºC, 7.0 m of cable PTC probe, from–50 to 150ºC, 15.0 m of cable PTC probe, from–50 to 150ºC, 30.0 m of cable Pt-100 probe, from–50 to 180ºC, 10.0 m of cable without braid Pt-100 probe, from–50 to 180ºC, 2.0 m of cable without braid Pt-100 probe, from–50 to 200ºC, 1.5 m of cable with braid Pt-100 probe, from–60 to 350ºC, 2.0 m of cable with braid Pt-100 probe, from–200 to 600ºC, in bracket 100 x 230 mm Pt-100 probe, from–100 to 200ºC, 2.0 m of cable Pt-100 probe to enviroment temperature J type probe, from 0 to 600ºC, 3.0 m of cable K type probe, from 0 to 1.000ºC, 3.0 m of cable Communication cable RS485, 3x0,5 mm2 shielded Pt-100 probe, EExd IIT6, IP65 box, to drums Pt-100 probe, EExd IIT6, for Ex zone and pipes Pt-100 probe, from -50 to 180ºC, 2.0 m of cable without braid 1590 1590 1590 1590 1590 1590 1590 1590 1590 1590 1590 1590 1590 1590 1590 1590 1590 1590 1590 1590 1590 1590 1590 1590 1590 Pack 48 Units 48 Units 48 Units 24 Units 1 Unit 10 Units 10 Units 10 Units 10 Units 10 Units 5 Units 1 Unit 1 Unit 1 Unit 5 Units 1 Unit 1 Unit 1 Unit 1 Unit 1 Unit 1 Unit 100 m 1 Unit 1 Unit 1 Unit (A) (A) The metres of packaged material are the standard ones; however, we reserve the right to supply in different lengths those indicated. Probes and accessories Humidity probes AKO-80040 AKO-80013 Reference Description Family Pack AKO-80013 AKO-80040 Wall humidity probe, 10 to 95%, -5/50ºC, output 4-20mA Tubular humidity probe, 5 to 95%, -10/70ºC, output 4-20mA 1590 1590 1 Unit 1 Unit 37 AKOCONTROL Probes and accessories Transformers and power supplies AKO-15589 Reference AKO-15589 AKO-15590 AKO-80014A AKO-15590 Description _ Power supply converter 14 to 30V~/12V=. 5VA Transformer 120-230/12V~, 3VA Power source 115-230V~/24V , 1A (up to 50 probes, 4-20mA type) AKO-80014A Family Pack 1590 1590 1590 10 Units 12 Units 1 Unit Parameter servers Tools for copying parameters The programmers are particularly recommended for manufacturers that must adjust the equipment with just one configuration. The portable servers allow the installer to rapidly load a pre-programmed configuration into the equipment, without having to enter the programming routine. Reference Description Family Pack AKO-14918 AKO-14916 AKO-14920 AKO-14921 AKO-14922 AKO-80018 Portable server for transferring parameters to the programmer Programmer for AKO-14412, AKO-14423 and AKOTIM panels Programmer for AKO-14012 to AKO-14123 Programmer for AKO-13012 to AKO-13123 Programmer for AKO-10123 to AKO-10323 Power supply 230/12V for programmers 1580 1580 1580 1580 1580 1580 10 Units 1 Unit 1 Unit 1 Unit 1 Unit 1 Unit 38 www.ako.com 39