4079 F
Transcription
4079 F
Installationsanweisung Instructions d'installation Instrucciones de instalación Istruzioni relative all’installazione Installation Guide 4079 F PCI 32 bit P&P Re-map Address 2S (16C750 64FIFO) 1P (ECP/EPP 32 FIFO) Beschreibung Die Plug & Play 2S/1P Neuzuordnung Eingabe/Ausgabe-Karte des Typs 4079F mit 32 Bit PCIBus ist mit zwei standardmäßig seriellen Hochgeschwindigkeitsschnitt-stelle RS-232.V24 und einer einer parallelen CENTRONICS-Schnittstelle des Typs ECP/EPP IEEE 1284c ausgestattet. Die serielle Schnittstelle umfaßt einen 64 Byte FIFO-Modus. Die Geschwindigkeit liegt bei bis zu 921 KB/S. Die 4079F umfaßt zwei Steckbuchse mit 9 Stiften zum Anfügen für Peripheriegeräte mit standardmäßiger serieller Schnittstelle RS-232 und eine Steckbuchse mit 25 Stiften für Peripheriegeräte mit einer parallelen CENTRONICS-Schnittstelle des Typs IEEE 1284c. Neuzuordnung auf die Adresse des Adapters mit Industriestandard (ISA): Serielle kann der ISA-Adresse neu zugeordnet werden: 3F8(H), 2F8(H), 3E8(H) und 2E8(H) Parallel kann der ISA-Adresse neu zugeordnet werden: 378(H), 278(H) Kontrollieren Sie den Packungsinhalt 4079F-Karte Druckerkabel-Anschlußbuchse mit 25 Stiften, ein Satz Softwaretreiber auf CD Hardwareanleitung auf CD Installationsanleitung Technische Daten der Hardware Serieller Anschluß UART Chipsatz: Kompatible Chips: IEEE-Standard: Treiberchipsatz: Max. Geschwindigkeit: Paralleler Anschluß Paralleler Chipsatz: Kompatible Chips: IEEE-Standard: Max. Geschwindigkeit: SUN 1889, SUN 1699, Hardware FIFO-Modus ist ein 32 Byte FIFO-Modus kompatibel mit 16C750, 16C650, 16C550 und 16C450 RS-232 Interface TI-75232 mit Geschwindigkeit bis zu 100 Kb/s, Länge 300-500 m bis zu 921 KB/s (HYPER-Terminorprogramm SUN 1689, Hardware FIFO-Modus ist ein 32 Byte FIFO-Modus kompatibel mit ACC3203, ST-78C36, HT6535 ECP/EPP/SPP/BPP (PS-II)-Schnittstelle bis zu 21.4 KB/s Hardware-Jumper und Anschluß S2 S1 P1 Installationsanleitung für die Hardware: • • Schalten Sie Ihren Computer aus und ziehen Sie das Netzkabel ab Stecken Sie den Stecker der 4079F-Karte in den parallelen Anschluß am PCI-Bus Ihres Computers • • Fügen Sie die Peripheriegeräte wie Drucker, Modem, Scanner usw. hinzu, die Sie für diesen Adapter benötigen Schalten Sie Ihren Computer wieder ein Anzeigebeispiel: Bus Nr. 0 0 • Die Auflistung der PCI-Geräte Gerät Nr. Funktion Nr. Lieferanten-ID Geräte-ID Geräteklasse IRQ 7 13 1 0 8086 1409 7010 7268 IDE-Controller Einfacher COMMController 14 10 Nach dem Abfragen können Sie, wenn Ihre Karte ordnungsgemäß installiert ist, WINDOWS 95, 98, NT oder 2000 oder LINUX installieren. Schlagen Sie dazu bitte in der INSTALLATIONSANLEITUNG nach. Wenn Lieferanten-ID, Geräte-ID, Geräteklasse oder IRQ nicht angezeigt werden, oder ein Fehlerwert erscheint, gehen Sie folgendermaßen vor: • • • • Wechseln Sie auf einen anderen Steckplatz. Reinigen Sie den Steckplatz. Reinigen Sie den goldenen Finger der 4079F. Sollte alles nicht helfen, wenden Sie sich bitte an Ihren Händler oder an den Hersteller. ZUORDNUNG DER STIFTE/(PINS): Stift 1 2 3 4 5 6 7 8 9 Parallele Anschlussbuchse mit 25 Stiften/Pins (P1): Signal Stift Signal Stift HINWEISSIGNAL 10 RÜCKMELDUNG 19 DATEN 0 11 BELEGT 20 DATEN 1 12 KEIN PAPIER 21 DATEN 2 13 AUSWAHL 22 DATEN 3 14 AUTO-VORSCHUB 23 DATEN 4 15 FEHLER 24 DATEN 5 16 INIT 25 DATEN 6 17 EINGABEAUSWAHL 26 DATEN 7 18 MASSE Signal MASSE MASSE MASSE MASSE MASSE MASSE MASSE MASSE ZUORDNUNG DER STIFTETIFTE/(PINS): Stift 1 2 3 Serieller Anschlussbuchse mit 9 Stiften/Pins (S1 und S2): Signal Stift Signal Stift Signal Stift CD 4 DTR 6 DSR 8 RD 5 MASSE 7 RTS 9 TD Signal CTS RI TECHNISCHE DATEN: Kompatibilität: Betriebssystem: Chipset: Anschlüsse: Leiterplatte: - 32 Bit PCI-Karte für 486/586/Pentium/Pentium-II/P-III/C5/K6 - WIN 95, 98, NT, 2000, LINUX, DOS, WIN 3.1 - 1 x SUN 1889, SUN 1699, 1 x SUN 1689 - Serieller Anschluß - 2 D-SUB-Stecker mit 9 Stiften/(Pins) - Parall. Anschluß – 1 x 25 D-SUB-Stecker mit 25 Stiften/(Pins) - 2 Schichten / 120 x 96 mm Description La carte entrée/sortie Plug & Play 2S/1P réaffectation, type 4079F, avec bus PCI 32 bits est dotée d'deux interface ultra-rapide sériel standard RS-232.V24. et d'un interface parallèle CENTRONICS, type ECP/EPP IEEE 1284c L’interface sériel comprend un mode FIFO 64 bytes. La vitesse maximale est de max. 921 KB/s. La carte 4079F contient deux connecteur avec 9 broches a ajouter pour périphériques avec Interface sérial standard RS-232 et une fiche femelle avec 25 broches pour périphériques avec un interface parallèle CENTRONICS, type IEEE 1284c. Réaffectation à l‘adresse de l‘adaptateur avec standard‘industriel (ISA) L’adresse ISA peut être réaffectée sérielle: 3F8(H), 2F8(H), 3E8(H), et 2E8(H) L’adresse ISA peut être réaffectée paralléle: 378(H), 278(H) Contrôlez le relevé d'identification Carte 4079F Prise femelle du câble d’imprimante avec 25 broches, un set Programme de gestion á CD Manuel matériel á CD Instructions d'installation Caractéristiques techniques du matériel Interface sériel Set de chips UART: Chips compatibles: Standard IEEE: Set de chips pilote: Vitesse maximale: Connexion parallèle Set de chips parallèles: Chips compatibles: Standard IEEE: Vitesse maximale: SUN 1889, SUN 1699, matériel mode FIFO est un mode FIFO 32 bytes compatibles avec 16C750, 16C650, 16C550 et 16C450 Interface RS-232 TI75232 avec vitesses jusqu’à 100 KB/s, longueur 300-500 m jusqu'à 921 KB/s (Programme HYPER Terminor) SUN 1689, matériel mode FIFO est un mode FIFO 32 bytes compatibles avec ACC3203, ST-78C36, HT6535 interface ECP/EPP/SPP/BPP (PS-II) jusqu'à 21.4 KB/s Cavalier matériel et port S2 S1 P1 Instructions d'installation pour le matériel: • • • • Eteignez votre ordinateur et débranchez-le. Insérez le connecteur de la carte 4079F au port parallèle au bus PCI de votre ordinateur. Ajoutez les périphériques (imprimantes, modem, scanner, etc.) dont vous avez besoin pour cet adaptateur. Remettez votre ordinateur en marche. Affichage des unités PCI (par exemple) Bus n° 0 0 • Unité n° 7 13 Fonction n° ID fournisseur ID unité Catégorie unité IRQ 1 0 8086 1409 7010 7268 contrôleur IDE Contrôleur COMM simple 14 10 Après l'interrogation, vous pouvez installer WINDOWS 95, 98, NT ou 200 ou LINUS, si votre carte est installée correctement. Reportez-vous pour cela aux instructions d'INSTALLATION. Si l'ID fournisseur, l'ID unité, la catégorie unité ou le IRQ ne sont pas affichés ou si une valeur d'erreur apparaît, procédez comme suit: • • • • Mettez sur un autre connecteur. Nettoyez le connecteur. Nettoyez la fiche or de la carte 4079F. Sie vous ne pouvez faire rien d’autre, veuillz contacter votre revendeur ou. affectation des BROCHES/(PINS): Broche 1 2 3 4 5 6 7 8 9 Prise femelle parallèle avec 25 broches/Pins (P1): Signal Broche Signal Broche signal 10 accusé de réception 19 d'indication 11 occupé 20 données 0 12 pas de papier 21 données 1 13 sélection 22 données 2 14 avance automatique 23 données 3 15 erreur 24 données 4 16 init 25 données 5 17 sélection introduction 26 données 6 18 masse données 7 Signal masse masse masse masse masse masse masse masse affectation des BROCHES/(PINS): Broche 1 2 3 Signal CD RD TD Connecteur sériel avec 9 broches (S1 et S2) Broche Signal Broche Signal Broche 4 DTR 6 DST 8 5 masse 7 RTS 9 Signal CTS RI caractéristiques techniques: Compatibilité: Système d'exploitation: Chipset: Connexions: Connexion sériel Connexion parallèle Carte imprimée: - carte PCI 32 bits pour Pentium 486/586 / Pentium-II/PIII/C5/K6 - WIN 95, 98, NT, 2000, LINUX, DOS, WIN 3.1 - 1 x SUN 1889, SUN 1699, 1 x SUN 1689, - 2 x fiche D-SUB avec 9 broches - 1 prise femelle D-SUB avec 25 broches - 2 couches / 120 x 96 mm Descripción: La tarjeta de entrada/salida Plug & Play 2S/1P nueva asignación del tipo 4079F con bus PCI de 32 bits está equipada con dos interfaz seriel estánder de alta velocidad RS-232.V24 y una interfaz paralela CENTRONICS del tipo ECP/EPP IEEE 1284c. La interfaz serial comprende un mode FIFO de 64 bytes. La velocidad asciende hasta 921 KB/seg. La 4079F contiene dos empalmador de enchufe con 9 clavijas para anadir unidades periféricas interfaz serial estándar RS-232y una interfaz paralela CENTRONICS del tipo IEEE 1284c. Nueva asignación a la dirección del adaptador con estándar industrial (ISA) Serialmente se le puede asignar de nuevo a la dirección ISA: 3F8(H), 2F8(H), 3E8(H) y 2E8(H) Paralela se le puede asignar de nuevo a la dirección ISA: 378(H), 278(H) Controle la lista del embalaje Tarjeta 4079F Hembrilla para el cable de impresora con 25 clavijeas, un juego Controlador de software en CD Instrucciones para el hardware en CD Instrucciones de instalación Datos técnicos del hardware Conexión sereal Conjunto de chips UART: Chips compatibles: Estándar IEEE: SUN 1889, SUN 1699, el hardware modo FIFO es un modo FIFO de 32 bytes Compatibles con 16C750, 16C650, 16C550 y 16C450 interfaz RS-232 Juego de chips de controlador: TI-75232 con velocidad hasta100 KB/seg, largo 300-500 m Velocidad máx.: Conexión paralela Conjunto de chips paralelos: Chips compatibles: Estándar IEEE: Velocidad máx.: hasta 921 KB/seg. (Programa Terminor HYPER) SUN 1689, el hardware modo FIFO es un modo FIFO de 32 bytes Compatibles con ACC3203, ST-78C36, HT6535 interfaz ECP/EPP/SPP/BPP (PS-II) hasta 21.4 KB/seg. Puentes de hardware y conexión S2 S1 P1 Instrucciones para la instalación del hardware: • • • • Desactive su ordenador y desenchufe el cable de alimentación de la red. Enchufe el conector de la tarjeta 4079F en la conexión paralela del bus PCI de su ordenador. Añada las unidades periféricas como impresora, módem, escáner, etc. que necesita Vd. para este adaptador. Active de nuevo su ordenador. Indicación de la relación de las unidades PCI (como ejemplo) No. de bus 0 0 • No. de unidad 7 13 No. de función 1 0 ID del suministrador 8086 1409 ID de la unidad 7010 7268 Clase de unidad IRQ Controlador IDE Controlador COMM simple 14 10 Después de la interrogación, y si su tarjeta está instalada reglamentariamente, Vd. podrá instalar WINDOWS 95, 98, NT o 2000 o LINUX. Consulte para ello por favor en las INSTRUCCIONES PARA LA INSTALACIÓN. Si no se indican la ID del suministrador, la ID de la unidad, la clase de unidad o el IRQ, o apare un valor de error, proceda de la siguiente manera: • • • • Cambie a otro zócalo. Limpie el zócalo. Limpie la patilla dorada de la 4079F Se no hay otra solución, consultecon su proveedor o el fabricante. ASIGNACIÓN DE LAS CLAVIJAS/(PINS): Clavija 1 2 3 4 5 6 7 8 9 Hembrilla de conexión paralela con 25 clavijas/Pins (P1): Señal Clavija Señal Clavija SEÑAL 10 RESPUESTA 19 INDICADORA DATOS 0 11 ASIGNADA 20 DATOS 1 12 NO HAY PAPEL 21 DATOS 2 13 SELECCIÓN 22 DATOS 3 14 AVANCE AUTOMÁTICO 23 DATOS 4 15 ERROR 24 DATOS 5 16 INIT 25 DATOS 6 17 SELECCIÓN DE 26 ENTRADA DATOS 7 18 MASA Señal MASA MASA MASA MASA MASA MASA MASA MASA ASIGNACIÓN DE LAS CLAVIJAS/(PINS): Clavija 1 2 3 Señal CD RD TD Conector serial con 9 clavijas (S1 y S2) Clavija Señal Clavija Señal Clavija 4 DTR 6 DSR 8 5 MASA 7 RTS 9 Señal CTS RI DATOS TÉCNICOS: Compatibilidad: Sistema operativo: Chipset: Conexiones Conexión serial Conexión paralela Placa de circuito impreso: - Tarjeta PCI de 32 bits para 486/586/ Pentium/Pentium-II/P-III/C5/K6 - WIN 95, 98, NT, 2000, LINUX, DOS, WIN 3.1 - 1 x SUN 1889, SUN 1699, 1 x SUN 1689 - 2 conector D-SUB con 9 clavijas - 1 hembrilla de conexión D-SUB con 25 clavijas - 2 capas / 120 x 96 mm Descrizione La card di entrata/uscita Plug&Play 2S/1P nueva attribuzione del tipo 4079F con PCI-Bus a 32 bit è dotata di due’interfaccia seriale standard ad alta velocità RS-232.V24 e un’interfaccia parallela CENTRONICS del tipo ECP/EPP IEEE 1284c. L’interfaccia seriale comprende un FIFO-Modus a 64 byte. La velocità va fino a 921 KB/s. La card 4079F contiene due porta a 9 spinotti per aggiunta apparecchiature periferiche con un’interfaccia seriale standard RS-232 e una presa con 25 spinotti per apparecchiature periferiche con un’interfaccia parallela CENTRONICS del tipo IEEE 1284c. Nuova attribuzione sull‘intdirizzo dell‘adattatore con standard industriale (ISA) Per default è possibile attribuire all’indirizzo ISA seriale: 3F8(H), 2F8(H), 3E8(H) e 2E8(H) Per default è possibile attribuire all’indirizzo ISA parallela: 378(H), 278(H) Controllare il contenuto della confezione Card 4079F Porta a 25 spinotti per il cavo per stampante, 1 set Driver del software su CD Istruzioni relative all’hardware su CD Istruzioni relative all’installazione Dati tecnici dei hardware Porta parallela Kit di chip UART: Chip compatibili: Standard IEEE: Set di driver per chip: Velocita max: Porta parallela Kit di chip paralleli: Chip compatibili: Standard IEEE: Velocita max: SUN 1889, SUN 1699, hardware FIFO-Modus è un FIFO-Modus di 32 byte compatibili con 16C750, 16C650, 16C550 e 16C450 Interfacia RS 232 TI-75232 con velocità fino a 100 kb/s, lunghezza 300-500 m La velocità va fino a 921 KB/s(Programma Terminor HYPER) SUN 16898, hardware FIFO-Modus è un FIFO-Modus di 32 byte compatibili con ACC3203, ST-78C36, HT6535 interfaccia ECP/EPP/SPP/BPP (PS-II) La velocità va fino a 21.4 KB/s Hardware-jumper e collegamento S2 S1 P1 Istruzioni relative all’installazione del hardware • • • • Spegnere il computer e rimuovere il cavo di rete Inserire la spina della card 4079F nella porta parallela sul PCI-Bus del proprio computer Collegare gli apparecchi periferici come stampante, modem, scanner ecc. che sono necessari per questo adattatore. Accendere il computer Visualizzazione della lista degli apparecchi PCI (come esempio) n. bus 0 0 n. apparecchio 7 13 n. funzione 1 0 ID fornitore 8086 1409 ID apparecchio 7010 7268 Categoria. Apparecchio IRQ Controller IDE Semplice controller COMM 14 10 Se la card è stata installata correttamente, è possibile installare WINDOWS 95, 98, NT oppure 2000 o LINUX. A tale scopo leggere le ISTRUZIONI PER L’INSTALLAZIONE. Se non vengono visualizzati ID del fornitore, ID degli apparecchio, categoria degli apparecchi IRQ, oppure appare un messaggio di errore, procedere come segue: • • • • Passare ad un altro slo Pulire il slot Pulire il dito d’oro del 4079F Se niente ajuta parla con su negoziante o con il fabricatore DISPOSIZIONE DEGLI SPINOTTI/(PINS): spinotto 1 2 3 4 5 6 7 8 9 segnale DI INDICAZIONE DATI 0 DATI 1 DATI 2 DATI 3 DATI 4 DATI 5 DATI 6 DATI 7 Porta parallela a 25 spinotti/Pins (P1): spinotto segnale 10 COMUNICAZ. DI RITORNO 11 RILEVATO 12 CARTA ESAURITA 13 SELEZIONE 14 AVANZAMENTO AUTOM. 15 ERRORE 16 INIT 17 SELEZIONE DI ENTRATA 18 MASSA spinotto 19 20 21 22 23 24 25 26 segnale MASSA MASSA MASSA MASSA MASSA MASSA MASSA MASSA DISPOSIZIONE DEGLI SPINOTTI/(PINS): Spinotti 1 2 3 Segnale CD RD TD Porta seriale a 9 spinotti/Pins (S1 e S2) Spinotti Segnale Spinotti Segnale Spinotti Segnale 4 DTR 6 DSR 8 CTS 5 MASSA 7 RTS 9 RI DATI TECNICI: compatibilità: sistema operativo: chipset: Porte: porta seriale porta parallela Circuito stampato: - scheda PCI a 32 Bit per 486/586/ Pentium/Pentium-II/P-III/C5/K6 - WIN 95, 98, NT, 2000, LINUX, DOS, WIN 3.1 - 1 x SUN 1889, SUN 1699, 1 x SUN 1689 - presa 2 D-SUB a 9 spinotti - presa 1 D-SUB a 25 spinotti - 2 strati/ 120 x 96 mm DESCRIPTION: The 4079F 32Bit PCI bus Plug & Play 2S/1P Re-map I/O card is equipped with two High-Speed RS-232.V24 Standard Serial-Interface and one ECP/EPP IEEE 1284c CENTRONICS Parallel Interface. The serial port include 64 byte FIFO, the speed Up to 921 KB/Sec. The 4079F include two 9 pin male connector for attaching peripherals' units with Serial RS-232 Standard Interface and one 25 pin female connector for peripherals' units with IEEE 1284C CENTRONICS Parallel Interface. Re-map to Industry Standard Adapter (ISA) Address: Serial can Re-map to ISA Address: 3F8(H), 2F8(H), 3E8(H) and 2E8(H) Parallel can Re-map to ISA Address: 378(H), 278(H) Check your packing listing: 4079F Card Print Cable 25PIN female one set Software Driver on CD Hardware Guide on CD Installation Guide Hardware Specification Serial Port: UART Chipset: Compatible chips: IEEE standard: Driver Chipset: Max. Speed: Parallel Port: Parallel Chipset: Compatible chips: IEEE standard: Max. Speed: SUN 1889, SUN 1699, Hardware FIFO are 32Byte FIFO with 16C750, 16C650, 16C550 and 16C450. RS-232 Interface TI-75232, speet up to 100 Kb/SECs, lenght 300-500M Up to 921 KB/Sec SUN1689, Hardware FIFO are 32Byte FIFO ACC3203, ST-78C36, HT6535. ECP/EPP/SPP/BPP (PS-II) Interface Up to 21.4KB/Sec Hardware Jumper and Connect S2 S1 P1 Hardware installation guide: • • • • Turn off the power of your computer Plug-in the 4079F MIO Parallel Adapter to PCI bus of your computer Add-on the peripheral (Printer, Modem, Scanner… etc.) that you need to this Adapter Turn on the power of your compute PCI device listing display (for example…) Bus No Device No 7 13 0 0 • Func No 1 0 Vendor ID 8086 1409 Device ID 7010 7268 Device Class IRQ IDE Controller Simple COMM. Controller 14 10 After the Screen, your Card install correct, you can install WINDOWS 95,98,NT, 2000 or LINUX. Please see INSTALL GUIDE When Display Vendor ID, Device Id, Device Class or IRQ aren’t DISPLAY or ERROR value, Please • • • • Change other slot Clean your slot Clean 4079F golden finger If nothing else can be done about it, please contact your retailer or the manufacturer PIN ASSIGNMENTS: Pin 1 2 3 4 5 6 7 8 9 Signal STROBE DATA 0 DATA 1 DATA 2 DATA 3 DATA 4 DATA 5 DATA 6 DATA 7 Pin 10 11 12 13 14 15 16 17 18 Parallel 25 Pin female connector (P1): Signal ACKNOWLEDGE BUSY PAPER EMPTY SELECT AUTO FEED ERROR INIT SELECT INPUT GROUND Pin 19 20 21 22 23 24 25 26 Signal GROUND GROUND GROUND GROUND GROUND GROUND GROUND GROUND PIN ASSIGNMENTS: Pin 1 2 3 Signal CD RD TD Pin 4 5 Serial 9 Pin male connector (S1 and S2): Signal Pin Signal DTR 6 DSR GROUND 7 RTS Pin 8 9 TECHNICAL SPECIFICATION: Compatibility: Operating system: Chipset: Connections: Connector serial Connector parallel PCB: - PCI 32Bit card for 486/586/Pentium/Pentium-II/ P-III/C5/K6 - WIN 95,98,NT, 2000,LINUX, DOS, WIN 3.1 - 1 x SUN 1889, SUN 1699, 1 x SUN 1689 - 2 x 9 Pin D-SUB male - 1 x 25 Pin D-SUB female connector parallel - 2 Layer / 120 x 96 mm Signal CTS RI