Technical Data STAINLESS STEEL SHOWER CURTAIN
Transcription
Technical Data STAINLESS STEEL SHOWER CURTAIN
WWW.BOBRICK.COM Technical Data STAINLESS STEEL SHOWER CURTAIN HOOK 204-1 1-3/8'' 35mm 2-9/16'' 65mm MATERIALS: 18-8 S, type-304, 0.09" (2mm) diameter stainless steel. OPERATION: Shower curtain hooks can be used with 1" and 1-1/4" (25 and 32mm) diameter shower curtain rods. Designer's Note: 72" (1830mm) high shower curtains of opaque white vinyl are available from Bobrick as an optional accessory. Order Part No. 204-2 for 42" (1065mm) wide curtains (requires 7 hooks) or Part No. 204-3 for 70" (1780mm) wide curtains (requires 12 hooks) . INSTALLATION: Hooks snap open to allow placement on 1" (25mm) or 1-1/4" (32mm) diameter shower curtain rods. Recommended for use with Bobrick Models B-207, B-6047, and B-6107 stainless steel shower curtain rods. SPECIFICATION: Shower curtain hooks shall be 0.09" (2mm) diameter, type-304 stainless steel. Hooks shall be usable with 1" and 1-1/4" (25 and 32mm) diameter shower curtain rods. Stainless Steel Shower Curtain Hooks shall be Part No. 204-1 of Bobrick Washroom Equipment, Inc., Clifton Park, New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company, Scarborough, Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment Limited, United Kingdom. The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. Revised 4/05 Printed in U.S.A. © 2005 by Bobrick Washroom Equipment, Inc. Fiche Technique CROCHET DE RIDEAU DE DOUCHE EN ACIER INOXYDABLE 204-1 1-3/8'' 35mm 2-9/16'' 65mm COMPOSITION: Acier inoxydable 18-8 S, de nuance 304 et de 0,09 po (2mm) de diamètre. FONCTIONNEMENT: Les crochets de rideau de douche sont utilisables avec des tringles de rideau de douche de 1 po et 1-1/4 po (25 et 32mm). Note du fabricant : Les grands rideaux de douche en vinyle blanc opaque de 72 po (1830mm) sont disponibles en option chez Bobrick. Commander le modèle no 204-2 pour des rideaux larges de 42 po (1065mm) nécessitant 7 crochets ou le modèle no 204-3 pour des rideaux larges de 70 po (1780mm) nécessitant 12 crochets. INSTALLATION: Les crochets s’ouvrent instantanément pour permettre I’installation sur les tringles de rideau de douche de 1 po (25mm) ou 1-1/4 po (32mm) de diamètre. Recommandés pour les modèles de tringles de rideau en acier inoxydable B-207, B-6047 et B-6107 de Bobrick. SPÉCIFICATIONS: Les crochets de rideau de douche ont un diamètre de 0,09 po (2mm) et sont en acier inoxydable de nuance 304. Les crochets sont utilisables avec des tringles de rideau de douche de 1 po et 1-1/4 po (25 et 32mm) de diamètre. La documentation relative au service après-vente et aux pièces est fournie au propriétaire ou au gérant de l’édifice au terme du projet. Les Crochets de rideau de douche en acier inoxydable correspondent au modèle no 204-1 de Bobrick washroom Equipment, Inc , Clifton Park, New York; Jackson, Tennessee; Los Angeles, California; de Bobrick Washroom Equipment Company, Scarborough, Ontario; de Bobrick Washroom Equipment Pty. Ltd., Australie; et de Bobrick Washroom Equipment Limited, Royaume-Uni. The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. Revised 4/05 Printed in U.S.A. © 2005 by Bobrick Washroom Equipment, Inc.