Leveringsprogramma
Transcription
Leveringsprogramma
acrylaat XT acrylate XT acrylate XT PMMA ALGEMENE INFO ACRYLAAT PLATEN XT GENERALITES SUR LES PANNEAUX EN ACRYLATE XT GENERAL INFO ON ACRYLIC SHEETS XT BESCHERMFOLIE: Acrylaat platen worden van beschermfolie voorzien. - Onderzijde: transparant-blauwe folie. - Bovenzijde: transparante folie. KLEURSPECIFICATIE: Kleur en lichtdoorlaat zijn gebaseerd op een referentiedikte en variëren dus in funktie van de dikte. FILM DE PROTECTION: Les panneaux en acrylate sont pourvus d’un film de protection sur les deux faces. - Face inférieure: film transparent bleu. - Face supérieure: film transparent incoloré. SPECIFICATION DES COLORIS Le coloris et la transmission lumineuse sont basés sur une épaisseur référentielle et varient donc en fonction de l’épaisseur. PROTECTION FILM : acrylic sheets are provided with a protection film. - lower side : transparent blue film - upper side : transparent film COLOUR SPECIFICATIONS Colour and light transmission are based on thickness references and vary in relation tot the thickness. GLASHELDER TRANSPARENT TRANSPARENT REF. 200-10000 200-10000 200-10000 200-10000 200-10000 200-10000 200-10000 200-10000 200-10000 200-10000 200-10000 LxBxs €/M² 33.55 41.61 54.64 73.17 90.89 109.01 146.94 187.40 54.64 73.17 90.89 3050 x 2050 x 1,5 3050 x 2050 x 2 3050 x 2050 x 3 3050 x 2050 x 4 3050 x 2050 x 5 3050 x 2050 x 6 3050 x 2050 x 8 3050 x 2050 x 10 4000 x 2050 x 3 4000 x 2050 x 4 4000 x 2050 x 5 OPAAL OPALIN OPALE REF. 200-27006 200-27006 200-27007 200-27007 200-27008 200-27008 200-27008 200-27008 200-27008 200-27008 200-27008 www.vink.be LxBxs (008) (008) (010) (010) (012) (012) (012) (012) (012) (012) (012) 68% 68% 50% 50% +/-38% +/-38% +/-38% +/-38% 3050 3050 3050 3050 3050 3050 3050 3050 4000 4000 4000 x x x x x x x x x x x 2050 2050 2050 2050 2050 2050 2050 2050 2050 2050 2050 IV - 205 €/M² x x x x x x x x x x x 3 4 3 4 2 3 4 5 3 4 5 57.41 80.64 57.41 80.64 43.68 57.41 80.64 95.41 57.41 80.64 95.41 acrylaat XT acrylate XT acrylate XT PMMA BUIZEN TUYAUX PIPES D 7 - 40 mm : L = 2000 mm D 44 - 250 mm : L = 2050 mm Toleranties / tolérances / tolerances: s: 1.50 mm +/- 0.25 mm 2.00 - 2.50 mm +/- 0.30 mm 3.00 mm +/- 0.30 - 0.35 mm 4.00 mm +/- 0.35 - 0.40 mm 5.00 mm +/- 0.40 - 0.55 mm D: 5 - 25 mm 30 - 40 mm 50 - 70 mm 80 - 90 mm 100 - 120 mm 133 - 139 mm 150 - 180 mm 200 mm +/+/+/+/+/+/+/+/- 0.3 0.5 0.8 0.9 1.2 1.3 1.5 2.0 mm mm mm mm mm mm mm mm D s d PN €/M D s d PN €/M D s d PN €/M 7 8 10 10 10 12 12 12 13 13 14 14 15 15 15 16 18 18 20 20 22 22 24 24 25 25 26 26 28 28 30 30 30 30 32 32 32 34 34 36 36 38 1.00 2.00 1.00 1.50 2.00 1.00 2.00 3.00 1.50 2.00 2.00 3.00 2.00 2.50 3.00 2.00 2.00 3.00 2.00 3.00 2.00 3.00 2.00 3.00 2.00 3.00 2.00 3.00 2.00 3.00 2.00 3.00 4.00 5.00 2.00 3.00 4.00 2.00 3.00 2.00 3.00 3.00 5.0 4.0 8.0 7.0 6.0 10.0 8.0 6.0 10.0 9.0 10.0 8.0 11.0 10.0 9.0 12.0 14.0 12.0 16.0 14.0 18.0 16.0 20.0 18.0 21.0 19.0 22.0 20.0 24.0 22.0 26.0 24.0 22.0 20.0 28.0 26.0 24.0 30.0 28.0 32.0 30.0 32.0 6.0 9.0 6.5 8.0 4.0 7.0 9.0 5.0 6.5 5.5 7.0 5.5 4.5 6.5 3.5 5.5 3.0 7.0 3.5 5.84 4.07 2.68 3.03 3.68 2.81 3.68 4.69 3.26 4.07 4.37 5.40 4.91 5.34 5.69 5.11 4.53 6.55 6.53 8.30 7.01 8.64 7.50 9.20 7.74 9.94 7.92 10.15 8.06 10.53 8.30 10.80 12.78 15.81 8.44 12.24 15.34 8.63 12.94 9.29 13.55 13.83 40 40 40 40 44 44 44 45 50 50 50 50 56 56 60 60 60 60 64 64 64 64 70 70 70 70 76 76 76 80 80 80 80 90 90 90 90 100 100 100 100 110 110 110 2.00 3.00 4.00 5.00 3.00 4.00 5.00 3.00 2.00 3.00 4.00 5.00 3.00 4.00 2.00 3.00 4.00 5.00 2.00 3.00 4.00 5.00 2.00 3.00 4.00 5.00 3.00 4.00 5.00 2.00 3.00 4.00 5.00 2.00 3.00 4.00 5.00 2.00 3.00 4.00 5.00 3.00 4.00 5.00 36.0 34.0 32.0 30.0 38.0 36.0 34.0 39.0 46.0 44.0 42.0 40.0 50.0 48.0 56.0 54.0 52.0 50.0 60.0 58.0 56.0 54.0 66.0 64.0 62.0 60.0 70.0 68.0 66.0 76.0 74.0 72.0 70.0 86.0 84.0 82.0 80.0 96.0 94.0 92.0 90.0 104.0 102.0 100.0 2.5 3.5 4.5 5.5 2.0 3.0 4.5 1.5 2.5 3.0 4.0 2.0 3.5 2.0 2.0 2.5 2.0 2.0 2.5 1.5 2.0 2.5 1.5 10.39 14.41 17.41 22.27 19.29 22.39 25.81 19.34 15.45 19.91 24.29 29.20 21.83 28.64 19.78 23.55 29.20 38.49 19.34 25.45 31.68 38.33 22.39 26.80 34.02 40.11 30.17 37.01 41.57 25.43 30.82 38.33 46.59 27.31 35.68 44.60 54.68 35.49 39.70 50.68 59.61 42.97 53.32 65.27 120 120 120 125 125 125 130 130 130 134 134 134 150 150 150 160 160 160 170 170 170 180 180 180 185 185 185 200 200 200 220 220 220 240 240 240 250 250 250 300 300 300 3.00 4.00 5.00 3.00 4.00 5.00 3.00 4.00 5.00 3.00 4.00 5.00 3.00 4.00 5.00 3.00 4.00 5.00 3.00 4.00 5.00 3.00 4.00 5.00 3.00 4.00 5.00 3.00 4.00 5.00 3.00 4.00 5.00 3.00 4.00 5.00 3.00 4.00 5.00 4.00 5.00 6.00 114.0 112.0 110.0 121.0 117.0 115.0 124.0 122.0 120.0 128.0 126.0 124.0 144.0 142.0 140.0 154.0 152.0 150.0 164.0 162.0 160.0 174.0 172.0 170.0 179.0 177.0 175.0 194.0 192.0 190.0 214.0 212.0 210.0 234.0 232.0 230.0 244.0 242.0 240.0 292.0 290.0 288.0 0.5 1.5 0.5 1.5 1.2 0.5 - 42.57 55.02 68.83 44.05 57.88 73.03 45.55 60.59 74.39 47.82 61.89 77.02 55.43 72.86 89.04 56.95 74.48 97.29 60.59 80.45 98.29 67.13 87.25 104.37 67.71 86.15 107.22 71.32 94.01 116.70 87.25 110.04 136.63 92.04 120.24 142.33 104.23 124.28 155.62 232.00 285.30 347.12 www.vink.be IV- 206 acrylaat XT acrylate XT acrylate XT PMMA RONDE VOLSTAVEN BARRES PLEINES RONDES FULL ROUND RODS TRANSPARANT TRANSPARENT TRANSPARENT L = 2000 mm D TOL. €/M D TOL. €/M 2 3 4 5 6 8 10 12 15 18 20 +0.5/-0 +0.5/-0 +0.8/-0 +0.8/-0 +0.8/-0 +0.8/-0 +0.8/-0 +1.0/-0 +1.0/-0 +1.0/-0 +1.0/-0 2.10 1.82 1.69 1.73 2.27 3.35 5.03 7.24 10.37 14.37 17.08 25 28 30 35 40 50 60 65 70 75 80 +1.0/-0 +1.3/-0 +1.3/-0 +1.3/-0 +1.3/-0 +1.3/-0 +1.5/-0 +1.5/-0 +1.5/-0 +1.5/-0 +1.5/-0 32.53 41.50 44.10 61.87 81.33 127.47 207.44 333.59 276.55 338.31 383.05 VIERKANTSTAVEN TRANSPARANT BARRES CARREES TRANSPARENT SQUARE RODSTRANSPARENT L = 2000 mm www.vink.be D TOL. €/M 10 12 15 20 25 30 +0.75 +0.75 +0.75 +1.00 +1.00 +1.30 8.92 15.36 20.16 31.45 49.55 81.65 IV - 207 gegoten acrylaat acrylate coulé cast acrylate PMMA ALGEMENE INFO ACRYLAAT PLATEN GEGOTEN GENERALITES SUR LES PANNEAUX EN ACRYLATE COULE GENERAL INFO ON CAST ACRYLIC SHEETS BESCHERMFOLIE Gegoten Acrylaat platen zijn voorzien van een beschermfolie. - Onderzijde van de platen: witte folie - Bovenzijde van de gladde platen: blauwe folie - Bovenzijde satijn en tweezijdig gestruktureerd: glasheldere folie. SPECIALE PRODUCTIES Dit leveringsprogramma toont de standaard artikelen. Afwijkende formaten, diktes of kleuren kunnen eventueel op bestelling worden geproduceerd, mits aan de volgende regels wordt voldaan: 1. Voor niet standaard artikelen geldt over het algemeen een toeslag op de prijs van standaardartikelen. 2. De kleinste productiehoeveelheid is één komplete charge. Een charge omvat 15 à 20 platen. Er dient steeds een komplete productie-charge te worden afgenomen. Het aantal platen dat geleverd wordt, is afhankelijk van de productieresultaten. Er kunnen zaagplaten (platen met aangetekende fouten) bij zijn. HALVE PLAATFORMATEN De gekleurde platen en specialiteiten (m.u.v. metallic) zijn ook leverbaar op de halve formaten 2030 x 1525 mm of 2000 x 1500 mm. De genoemde m2 prijs wordt dan verhoogd met 10%. FILM DE PROTECTION Les panneaux en acrylate coulé sont pourvus d’un film de protection sur les deux faces. - Face inférieure des panneaux: film blanc - Face supérieure des panneaux lisses: film bleu - Face supérieure satinée ou panneau aux deux faces structurées: film transparent. FABRICATIONS SPECIALES Ce programme de livraison présente les articles standards. Des formats, épaisseurs ou coloris qui s’en écartent peuvent éventuellement être fabriqués sur commande et ce, dans les conditions suivantes: 1. Pour les articles non standards, en général, seul un supplément est exigé sur le prix des articles standards. 2. La quantité minimale à produire est une charge complète équivalant 15 à 20 panneaux. La charge produite doit toujours être acceptée dans son intégralité. Le nombre de panneaux livrés dépend des résultats de la production. Le lot peut contenir des panneaux sanctionnés (panneaux marqués du fait de leurs manquements) PANNEAUX EN DEMI-FORMATS Les panneaux colorés et les spécialités (par ex. les coloris métallisés) sont aussi livrables en demi-formats, tels que 2030 x 1525 mm et 2000 x 1500 mm. Le prix au m² mentionné dans le tarif est majoré de 10 % PROTECTION FILM Cast acrylic sheets are provided with a protection film. - lower side : white film - upper side smooth sheets : blue film - upper side two-sided structured : transparent film. SPECIAL PRODUCTIONS This supply program shows the standard articles. Deviant dimensions, thicknesses or colours can possibly be produced on request, in case, the following rules are followed : 1. For non standard articles, a supplement on the standard price is generally asked. 2. The minimum production quantity measures up to one complete charge. A charge contains 15 to 20 sheets. One should always order at least one complete production charge. The number of supplied sheets depends on the production results. Some sheets may contain minimal defaults. HALF SHEETS The coloured sheets and specialities (except for metallic) are also available in half formats : 2030 x 1525 mm or 2000 x 1500 mm. The price is increased with 10%. www.vink.be IV- 208 gegoten acrylaat acrylate coulé cast acrylate PMMA GLASHELDER TRANSPARENT TRANSPARENT REF. LxBxs 100-10000 100-10000 100-10000 100-10000 100-10000 100-10000 100-10000 100-10000 100-10000 100-10000 3050 3050 3050 3050 3050 3050 3000 3000 3000 3000 x x x x x x x x x x 2030 2030 2030 2030 2030 2030 2050 2050 2050 2050 €/M² x x x x x x x x x x 59.41 75.65 90.04 108.11 151.02 193.23 247.40 289.83 413.35 576.64 3 4 5 6 8 10 12 15 20 25 OPAAL OPALIN OPALE REF. 101-27021 101-27021 101-27021 101-27021 101-27021 101-27021 LxBxs 28% 28% 28% 28% 28% 28% 3050 3050 3050 3050 3050 3050 x x x x x x 2030 2030 2030 2030 2030 2030 €/M² x x x x x x 65.54 83.42 99.29 119.17 158.56 202.93 3 4 5 6 8 10 Eveneens leverbaar / aussi livrable / also available: 100-27018 82% 100-27013 74% 100-27000 40% 100-27016 50% 100-27100 50% led system FUMÉ FUME SMOKE REF. grijs/gris/grey bruin/brun/brown 100-16026 100-16026 100-16026 100-16026 100-16026 100-16036 100-16036 100-16036 LxBxs 3050 3050 3050 3050 3050 3050 3050 3050 x x x x x x x x 2030 2030 2030 2030 2030 2030 2030 2030 x x x x x x x x 3 4 5 6 8 5 6 8 prijs op aanvraag / prix sur demande / prices on request www.vink.be IV - 209 gegoten acrylaat acrylate coulé cast acrylate PMMA KLEUREN COULEURS COLOURS Translucente kleuren: Fluorescerende kleuren: Transparante kleuren: Gepigmenteerde kleuren: geel, ivoor, oranje, rood, paars, blauw en groen: s = 3 mm geel, rood, blauw, paars, groen en oranje : s = 3 mm geel, rood, blauw, groen, oranje : s = 3 tot 8 mm glasslook : s = 10 mm grijs, rood en blauw : s = 3 mm zwart : s = 3 tot 15 mm Couleurs translucides: Couleurs translucides: Couleurs transparentes: Couleurs pigmentées: jaune, ivoir, orange, rouge, violet, bleu et vert: s = 3 mm jaune, rouge, bleu, violet, vert et orange: s = 3 mm jaune, rouge, bleu, vert, orange : s = 3 jusqu’à 8 mm glasslook: s = 10 mm gris, rouge et bleu : s = 3 mm noir : s = 3 jusqu’à 15 mm Translucent colors : Fluorescent colors : Transparent colors : Pigmented colors : yellow, ivory, orange, red, violet, blue et green: s = 3 mm yellow, red, blue, violet, green et orange: s = 3 mm yellow, red, blue, green, orange : s = 3 to 8 mm glasslook: s = 10 mm grey, red et blue : s = 3 mm noir: s= 3 to 15 mm BLOKKEN BLOCS BLOCS REF. 160-10001 160-10001 160-10001 160-10001 160-10001 LxBxs 2000 2000 2000 2000 2000 x x x x x 1200 1200 1200 1200 1200 x x x x x 30 40 50 60 80 prijs op aanvraag / prix sur demande / prices on request www.vink.be IV- 210 gegoten acrylaat acrylate coulé cast acrylate PMMA GLASHELDER TRANSPARENT TRANSPARENT REF. 145-10000 145-10000 145-10000 145-10000 145-10000 DUAL SATIN LxBxs 3050 3050 3050 3050 3050 x x x x x 2030 2030 2030 2030 2030 €/M² x x x x x 3 4 5 8 10 92.87 118.21 140.68 246.13 301.43 OPAAL OPALINDUAL SATIN OPALE REF. 145-27014 145-27014 145-27014 145-27014 145-27014 LxBxs 3050 3050 3050 3050 3050 x x x x x 2030 2030 2030 2030 2030 €/M² x x x x x 3 4 6 8 10 97.54 124.13 193.94 258.14 295.49 kleuren op aanvraag / couleurs sur demande / colours on request www.vink.be IV - 211 gegoten acrylaat acrylate coulé cast acrylate PMMA CENTRIFUGAAL GEGOTEN COULE PAR CENTRIFUGATION CENTRIFUGALLY CAST D D D D 45 - 300 mm : 350 - 457 mm : 400 mm : 500 mm : L L L L = = = = 2030 3030 2160 2180 mm mm mm mm Toleranties / tolérances / tolerances: s: 2-3 mm +/- 20% 4 mm +/- 15% >5 mm +/- 10% -30/+15 mm -30/+15 mm -30/+15 mm -30/+0 mm D: 45 - 50 mm D: 51 - 100 mm D: 102 - 300 mm D 3 44 50 51 58 60 64 70 76 80 90 100 102 110 115 120 125 127 130 134 139 150 153 160 164 168 172 185 200 212 220 230 240 250 270 300 350 400 457 500 www.vink.be 48.66 42.45 54.75 58.84 48.19 53.32 53.63 76.67 65.47 67.55 67.53 86.03 72.60 91.91 90.19 92.74 109.16 112.57 116.04 118.68 102.69 128.61 120.39 152.76 163.52 168.41 174.06 153.27 191.29 192.71 198.21 198.61 - 4 53.53 56.40 58.84 62.68 51.78 55.99 56.41 79.94 67.08 86.03 71.83 94.94 99.62 106.49 92.90 96.36 121.54 124.56 127.61 110.09 116.00 143.03 132.10 163.73 149.53 180.14 185.42 147.27 207.51 182.35 222.15 184.40 199.39 218.62 261.36 273.68 299.14 - 5 S €/M 58.41 54.18 62.88 71.81 58.66 62.19 71.00 84.80 72.39 77.42 80.66 103.66 87.58 93.61 96.03 105.71 125.78 129.04 135.52 120.89 123.10 160.89 137.81 173.04 179.56 185.42 153.26 164.66 223.98 195.90 201.28 211.38 226.55 280.15 284.62 379.32 380.31 699.17 504.99 IV- 212 +1/-2% +1/-1.5% +0.5/-1% 6 8 69.37 80.32 80.96 83.78 86.08 92.71 94.74 96.35 103.66 121.74 126.52 133.48 135.13 143.03 150.33 160.89 164.13 168.17 174.68 169.96 192.18 204.31 215.03 215.47 218.29 234.24 263.92 249.03 301.06 303.92 322.39 327.22 341.04 350.99 315.26 441.30 505.76 706.81 712.00 76.90 110.78 113.01 118.68 116.18 141.23 150.53 157.25 179.56 174.68 188.09 197.59 207.51 218.29 225.21 231.60 237.15 223.47 242.64 247.88 261.69 258.76 297.83 305.93 313.04 328.66 316.07 382.43 379.97 397.41 419.97 465.30 453.43 456.72 692.04 595.64 879.93 10 125.98 129.04 135.13 140.39 149.93 156.80 171.81 179.56 194.29 218.29 229.42 203.53 243.22 250.73 263.92 264.32 268.58 275.08 296.18 311.63 322.39 309.26 349.11 370.51 379.97 400.88 407.04 462.56 478.58 516.91 541.91 483.48 552.81 598.71 849.75 762.15 1,270.59 1,143.43 gegoten acrylaat acrylate coulé cast acrylate PMMA RONDE VOLSTAVEN BARRES PLEINES RONDES FULL ROUND RODS D < 6: D = 6-100: D > 100: TRANSPARANT TRANSPARENT TRANSPARENT L = 1000 mm L = 1000 / 2000 mm L = 1000 mm D €/M D €/M 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 30 32 7.89 6.97 6.05 4.05 4.87 5.08 6.43 7.13 8.27 8.50 11.40 12.00 12.32 16.37 18.99 17.66 18.53 19.13 23.45 25.18 25.78 26.78 27.66 35.18 36.74 37.61 38.42 48.58 51.17 35 36 38 40 45 50 55 60 65 70 75 80 85 90 95 100 110 120 130 140 150 160 170 180 65.55 70.52 73.44 85.59 102.50 124.99 152.86 165.02 196.58 219.65 246.35 275.53 333.77 365.28 406.56 439.31 613.51 958.79 1,207.63 1,468.56 1,674.92 2,306.00 2,560.82 2,670.14 VIERKANTSTAVEN TRANSPARANT BARRES CARREES TRANSPARENT SQUARE RODSTRANSPARENT D = 6-100: D = 100-200 www.vink.be L = 1000 / 2000 mm L = 1000 mm D €/M D €/M D €/M D €/M 6 8 10 12 15 18 20 22 25 28 7.85 9.05 8.82 11.46 16.48 21.48 25.18 30.53 37.07 46.70 30 35 40 45 50 55 60 65 70 75 52.42 60.63 76.46 111.02 123.91 174.97 183.42 235.30 230.40 289.61 80 85 90 95 100 110 120 130 140 150 297.14 386.14 392.17 476.64 513.88 653.57 874.84 1,110.14 1,375.61 1,541.35 160 170 180 190 200 1,954.80 2,353.01 2,715.01 3,197.68 3,499.35 IV - 213