GEAR COMPOUND PLUS
Transcription
GEAR COMPOUND PLUS
Technisches Datenblatt 1/2 GEAR COMPOUND PLUS Zink- und bleifreie Hochdruck-Industrie-Getriebeoele Beschreibung Einsatzbereich Die MOTOREX GEAR COMPOUND PLUS-Familie ist eine Reihe von Hochleistungs-Getriebeoelen mit hervorragenden chemischen und physikalischen Eigenschaften. Sorgfältig ausgewählte Grundoele und aufeinander abgestimmte Additives verleihen diesem vielseitig einsetzbaren Schmierstoff sein aussergewöhnliches Leistungsniveau. Bei hohen, schlagartigen Belastungen bleibt stets ein schützender Oelfilm zwischen den kraftübertragenden Oberflächen. MOTOREX GEAR COMPOUND PLUS wird in allen Stirnrad-, Kegelrad- und Planetenradgetrieben aller bekannten Hersteller empfohlen. Die aussergewöhnliche Qualität dieses Schmiermittels zeigt sich besonders bei hohen, schlagartigen Belastungen und bei erschwerten Bedingungen in der Umgebung des Getriebes, wie z. B. starke Feuchtigkeit oder Nässe und sehr hohe Temperaturen während des Betriebes oder sehr tiefe Temperaturen beim Start. Diese Oele sind bestens geeignet für Bergbahnen, Skilifte, Kieswerke und Kläranlagen. Vorteile • • • • • • • • exzellenter Korrosionsschutz hoher Verschleissschutz hohe Graufleckentragfähigkeit verträglich mit üblicherweise für Mineraloel verwendete Dichtungsmaterialien sehr gutes Demulgiervermögen geringe Schaumneigung hervorragende Scherstabilität hohe Alterungs- und Oxidationsstabilität Spezifikationen Die Produkte erfüllen und übertreffen die Anforderungen gemäss: • DIN 51 517-3 (2004): CLP • ISO 6743-6: CKD • ISO 12925-1: CKD • AIST 224 • AGMA 9005/D94 • David Brown S1 53.101 Die Produkte der GEAR COMPOUND PLUS-Reihe sind freigegeben u.a. von: • A. Friedrich Flender AG, Bocholt, Tafel A der Flender BA 7300 • Müller Weingarten AG, DT 55 005, 10/2003 • Bosch Rexroth-Getriebe gem. RNM 17421 (ISO VG 150, 220, 320, 460) Hinweise Obige Angaben entsprechen dem derzeitigen Stand der Erkenntnisse. Änderungen bleiben vorbehalten. Für die angegebenen Kenndaten gelten die branchenüblichen Mess- und Produktionstoleranzen. Ein Sicherheitsdatenblatt über das beschriebene Produkt ist erhältlich. MOTOREX AG LANGENTHAL Industrie-Schmiertechnik Postfach, CH-4901 Langenthal, Schweiz Tel. +41 (0)62 919 74 74, Fax +41 (0)62 919 76 96 www.motorex.com BUCHER AG LANGENTHAL MOTOREX-Schmiertechnik Postfach, CH-4901 Langenthal, Schweiz Tel. +41 (0)62 919 75 75, Fax +41 (0)62 919 75 95 www.motorex.com N:\ ti\ gear oil\ gear compound plus Okt.10 Nicht mischen mit Getriebeoelen der MOTOREX GEARSYNT-Reihe oder anderen Getriebeoelen auf der Basis von Polyglykol. Bei einer Umstellung von solchen Produkten auf MOTOREX GEAR COMPOUND PLUS muss das Getriebe gespült werden. Beachten Sie bitte die technische Information Nr. 456. Technisches Datenblatt 2/2 GEAR COMPOUND PLUS Zink- und bleifreie Hochdruck-Industrie-Getriebeoele Technische Kenndaten Eigenschaften Viskositäts-Klasse Dichte bei 20 °C Einheit ISO VG Prüfung nach ISO 3448 Werte 46 68 100 150 g/ml ASTM D 4052 0.876 0.878 0.880 0.887 0.892 0.897 0.900 0.919 220 320 460 680 Viskosität bei 40 °C mm²/s DIN 51562-1 47 67 102 149 217 330 468 662 Viskosität bei 100 °C mm²/s DIN 51562-1 7.0 8.6 11.4 14.6 18.6 24.6 30.8 36.5 DIN ISO 2909 106 100 98 97 96 96 95 - 36 - 30 - 27 - 24 - 18 - 15 - 12 Viskositätsindex 90 Pourpoint °C ASTM D 5950 Flammpunkt °C DIN EN ISO 2592 >210 >220 >220 >225 >230 >230 >240 >245 DIN ISO 6614 DIN ISO 6614 10 - 10 - 10 -15 15 20 25 30 30 Demulgiervermögen bei 54 °C bei 82 °C Min. Min. - 11 Korr. Stahl Test B (Korr.-Grad) DIN ISO 7120 0 0 0 0 0 0 0 0 Korr. Kupfer (Korr.-Grad) DIN EN ISO 2160 1 1 1 1 1 1 1 1 2500 2500 2600 2600 2600 2600 2800 VKA Schweisskraft (N) 2500 FZG A/16,6/140 SchadensStarttemperatur: 140° C kraftstufe DIN ISO 14635-1 >12 >12 >12 >12 >12 >12 >12 >12 FZG-GFT*-Test GT-C/8,3/90 Stufentest GF-Klasse FVA-54/ll GFT hoch GFT hoch GFT hoch GFT hoch GFT hoch GFT hoch GFT hoch GFT hoch GFT hoch GFT hoch GFT hoch GFT hoch Dauertest GF-Klasse FVA-54/ll GFT hoch GFT hoch GFT hoch GFT hoch * GFT = Graufleckentragfähigkeitstest Obige Angaben entsprechen dem derzeitigen Stand der Erkenntnisse. Änderungen bleiben vorbehalten. Für die angegebenen Kenndaten gelten die branchenüblichen Mess- und Produktionstoleranzen. Ein Sicherheitsdatenblatt über das beschriebene Produkt ist erhältlich. MOTOREX AG LANGENTHAL Industrie-Schmiertechnik Postfach, CH-4901 Langenthal, Schweiz Tel. +41 (0)62 919 74 74, Fax +41 (0)62 919 76 96 www.motorex.com BUCHER AG LANGENTHAL MOTOREX-Schmiertechnik Postfach, CH-4901 Langenthal, Schweiz Tel. +41 (0)62 919 75 75, Fax +41 (0)62 919 75 95 www.motorex.com N:\ ti\ gear oil\ gear compound plus Okt.10 Wassergefährdungsklasse: WGK 2 Entsorgungscode: VeVA/EWC 130 205 Fiche technique 1/2 GEAR COMPOUND PLUS Huiles pour engrenages industriels haute pression, exemptes de plomb et de zinc Description Domaine d’utilisation La famille MOTOREX GEAR COMPOUND PLUS est une ligne d’huiles pour engrenages à hautes performances avec des propriétés chimiques et physiques d’avant garde. Des huiles de base et un choix exclusif d’additifs confèrent à ce lubrifiant universel ce très haut niveau de performance. Lors de très hautes charges par à-coups, un film protecteur lubrifiant reste toujours présent entre les surfaces transmettant les efforts. MOTOREX GEAR COMPOUND PLUS est vivement conseillée par tous les fabricants renommés pour tous les entraînements à différentiels droits, pignons coniques et planétaires. La qualité exceptionnelle de ce lubrifiant est démontrée particulièrement lors d’utilisations sous fortes charges par à-coups et dans des conditions d’exploitation très sévères avec un environnement de la transmission comme p.ex. un haut degré d’humidité et des températures très élevées durant le fonctionnement ou lors de températures très basses lors du démarrage. Ces huiles sont destinées spécialement pour les remontées mécaniques, les téléskis, les équipements pour les gravières et les stations d’épuration des eaux usées. Avantages • • • • • • • • excellente protection contre la corrosion protection élevée contre l’usure capacité de résistance élevée à l’usure par micropiquage compatible avec tous les matériaux pour joints d’étanchéité usuels pour huiles minérales très bonne capacité de se désémulsionner faible tendance au moussage excellente stabilité au cisaillement stabilité élevée au vieillissement et à l’oxydation Spécifications Les produits sont conformes ou supérieurs aux spécifications suivantes: • DIN 51 517-3 (2004): CLP • ISO 6743-6: CKD • ISO 12925-1: CKD • AIST 224 • AGMA 9005/D94 • David Brown S1 53.101 Les produits de la série GEAR COMPOUND sont entre-autres homologués par: • A. Friedrich Flender AG, Bocholt, tableau A Flender BA 7300 • Müller Weingarten AG, DT 55 005, 10/2003 • Bosch engrenages Rexroth selon RNM 17421 (ISO VG 150, 220, 320, 460) Remarques Les données ci-dessus correspondent au dernier stade des connaissances actuelles. Toutes modifications restent réservées. Les données techniques communiquées ci-dessus sont fonction des tolérances de mesure et de fabrication en usage dans la profession. Une fiche de sécurité est disponible. MOTOREX AG LANGENTHAL Industrie-Schmiertechnik Postfach, CH-4901 Langenthal, Schweiz Tel. +41 (0)62 919 74 74, Fax +41 (0)62 919 76 96 www.motorex.com BUCHER AG LANGENTHAL MOTOREX-Schmiertechnik Postfach, CH-4901 Langenthal, Schweiz Tel. +41 (0)62 919 75 75, Fax +41 (0)62 919 75 95 www.motorex.com N:\ ti\ gear oil\ gear compound plus Okt.10 Ne pas mélanger avec des huiles pour engrenages des sortes MOTOREX GEARSYNT ou avec d’autres huiles pour engrenages à base de polyglycole. Lors du changement de ces produits pour MOTOREX GEAR COMPOUND PLUS, la boîte d’engrenage doit être rincée. Veuillez lire attentivement l'information technique no. 456. Fiche technique 2/2 GEAR COMPOUND PLUS Huiles pour engrenages industriels haute pression, exemptes de plomb et de zinc Données techniques Propriétés Classe de viscosité Unité ISO VG Testé selon ISO 3448 Valeurs 46 68 ASTM D 4052 0.876 0.878 0.880 100 150 220 320 460 680 0.887 0.892 0.897 0.900 0.919 Densité à 20 °C g/ml Viscosité à 40 °C mm²/s DIN 51562-1 47 67 102 149 217 330 468 662 Viscosité à 100 °C mm²/s DIN 51562-1 7.0 8.6 11.4 14.6 18.6 24.6 30.8 36.5 DIN ISO 2909 106 100 98 97 96 96 95 90 - 36 - 30 - 27 - 24 - 18 - 15 - 12 - 11 Indice de viscosité Pourpoint °C ASTM D 5950 Point éclair °C DIN EN ISO 2592 >210 >220 >220 >225 >230 >230 >240 >245 DIN ISO 6614 DIN ISO 6614 Capacité de désémulsification à 54 °C min. à 82 °C min. 10 - 10 - 10 - 15 15 20 25 -30 0 0 0 0 0 0 0 0 (degré de corr.) DIN EN ISO 2160 1 1 1 1 1 1 1 1 2600 2600 2600 2600 2800 >12 >12 >12 Corrosion acier essai B (degré de corr.) DIN ISO 7120 Corrosion cuivre Force de soudage app. 4 billes (N) 2500 2500 2500 FZG A/16,6/140 capacité de soudage Temp. de démarrage: 140° C au grippage DIN ISO 14635-1 >12 Essai de micropiquage EdM* FZG GT-C/8,3/90 Essai différentiel classe GF FVA-54/ll Essai continue classe GF FVA-54/ll >12 >12 >12 >12 EdM EdM EdM élevé élevé élevé EdM EdM EdM élevé élevé élevé EdM élevé EdM élevé EdM EdM EdM élevé élevé élevé EdM EdM EdM élevé élevé élevé EdM élevé EdM élevé * EdM = essai de micropiquage Les données ci-dessus correspondent au dernier stade des connaissances actuelles. Toutes modifications restent réservées. Les données techniques communiquées ci-dessus sont fonction des tolérances de mesure et de fabrication en usage dans la profession. Une fiche de sécurité est disponible. MOTOREX AG LANGENTHAL Industrie-Schmiertechnik Postfach, CH-4901 Langenthal, Schweiz Tel. +41 (0)62 919 74 74, Fax +41 (0)62 919 76 96 www.motorex.com BUCHER AG LANGENTHAL MOTOREX-Schmiertechnik Postfach, CH-4901 Langenthal, Schweiz Tel. +41 (0)62 919 75 75, Fax +41 (0)62 919 75 95 www.motorex.com N:\ ti\ gear oil\ gear compound plus Okt.10 Danger de pollution de l'eau: WGK 2 Code déchet: OMoD/EWC 130 205 Technical data sheet 1/2 GEAR COMPOUND PLUS High-pressure industrial gear oils, free of zinc and lead Description Field of application MOTOREX’s GEAR COMPOUND PLUS product line is a high-performance range of gear oils with excellent chemical and physical characteristics. Carefully selected base oils and coordinated additives give this versatile lubricant its exceptional performance. In the case of high and intense sudden loading there is always a protective oil film between the surfaces that transfer power. MOTOREX GEAR COMPOUND PLUS is recommended for all spur, bevel and planetary gears produced by all well-known manufacturers. The exceptional quality of this lubricant becomes particularly apparent in the case of high sudden loading and difficult conditions around the gear unit such as an intensely wet or moist environment and very high temperatures during operation or very low start-up temperatures. These oils are extremely suitable for mountain railways, ski lifts, gravel pits and sewerage treatment plants. Advantages • • • • • • • • Excellent corrosion protection High protection against wear Very good at withstanding micro pitting Compatible with sealing materials generally used for mineral oil Very good demulsification capability Low tendency to foam Excellent shear stability High ageing and oxidation capability Specifications The products satisfy and exceed the requirements in accordance with: • DIN 51 517-3 (2004): CLP • ISO 6743-6: CKD • ISO 12925-1: CKD • AIST 224 • AGMA 9005/D94 • David Brown S1 53.101 Organisations which have approved the products in the GEAR COMPOUND PLUS range include: • A. Friedrich Flender AG, Bocholt, Table A of Flender BA 7300 operating instructions • Müller Weingarten AG, DT 55 005, 10/2003 • Bosch Rexroth gears to RNM 17421 (ISO VG 150, 220, 320, 460) Note The above information is subject to change without prior notice, although it is in accordance with current standards. Performance characteristics indicated are based on usual tolerances which occur during measuring and production using the latest technology. A safety data sheet is available. MOTOREX AG LANGENTHAL Industrie-Schmiertechnik Postfach, CH-4901 Langenthal, Schweiz Tel. +41 (0)62 919 74 74, Fax +41 (0)62 919 76 96 www.motorex.com BUCHER AG LANGENTHAL MOTOREX-Schmiertechnik Postfach, CH-4901 Langenthal, Schweiz Tel. +41 (0)62 919 75 75, Fax +41 (0)62 919 75 95 www.motorex.com N:\ ti\ gear oil\ gear compound plus Okt.10 Do not mix with gear oils from MOTOREX’s GEARSYNT range or other polyglycol-based gear oils. The gear unit must be flushed when changing over from such products to MOTOREX GEAR COMPOUND PLUS. Please see technical information sheet no. 456. Technical data sheet 2/2 GEAR COMPOUND PLUS High-pressure industrial gear oils, free of zinc and lead Technical data Properties Viscosity class Unit ISO VG Test according to Values ISO 3448 46 68 100 ASTM D 4052 0.876 0.878 0.880 0.887 0.892 0.897 0.900 0.919 150 220 320 460 680 Density at 20 °C g/ml Viscosity at 40 °C mm²/s DIN 51562-1 47 67 102 149 217 330 468 662 Viscosity at 100 °C mm²/s DIN 51562-1 7.0 8.6 11.4 14.6 18.6 24.6 30.8 36.5 DIN ISO 2909 106 100 98 97 96 96 95 90 - 36 - 30 - 27 - 24 - 18 - 15 - 12 - 11 Viscosity index Pourpoint °C ASTM D 5950 Flash point °C DIN EN ISO 2592 >210 >220 >220 >225 >230 >230 >240 >245 DIN ISO 6614 DIN ISO 6614 Demulsification capability At 54°C At 82°C Min. Min. 10 - 10 - 10 - 15 15 20 25 -30 Corr. steel test B (Corr. level) DIN ISO 7120 0 0 0 0 0 0 0 0 Copper corrosion (Corr. level) DIN EN ISO 2160 1 1 1 1 1 1 1 1 Four-ball tester welding force FZG A/16.6/140 Starting temp.: 140° C (N) Fail load stage FZG-GFT* test GT-C/8.3/90 Stage test GF class Continuous test GF class 2500 2500 2500 2600 2600 DIN ISO 14635-1 >12 >12 >12 >12 >12 FVA-54/ll GFT High GFT High GFT High GFT High GFT High FVA-54/ll GFT High GFT High GFT High GFT High GFT High 2600 2600 >12 2800 >12 >12 GFT High GFT High GFT High GFT High GFT High GFT High * GFT = Graufleckentragfähigkeitstest (micro pitting test) The above information is subject to change without prior notice, although it is in accordance with current standards. Performance characteristics indicated are based on usual tolerances which occur during measuring and production using the latest technology. A safety data sheet is available. MOTOREX AG LANGENTHAL Industrie-Schmiertechnik Postfach, CH-4901 Langenthal, Schweiz Tel. +41 (0)62 919 74 74, Fax +41 (0)62 919 76 96 www.motorex.com BUCHER AG LANGENTHAL MOTOREX-Schmiertechnik Postfach, CH-4901 Langenthal, Schweiz Tel. +41 (0)62 919 75 75, Fax +41 (0)62 919 75 95 www.motorex.com N:\ ti\ gear oil\ gear compound plus Okt.10 Water hazard class: WGK 2 Disposal code: EWC 130 205