CP9005
Transcription
CP9005
Steuerungssysteme CP9005 Programmiersoftware ecolog tdm R 360 Programmierung und Parametrierung von Dialoggeräten ecomat tdm R 360 Einfache Steuerfunktion über Kontaktplanprogrammierung nach IEC 61131-3 Verwendung Funktion Programmfunktionen im Überblick für Dialoggeräte ecomat tdm R 360 (Bestell-Nr. CR10xx) Das Programm ermöglicht das Erstellen von Texten, das Zeichnen von Grafiken und Bildern sowie das Festlegen von Variablen. Zusätzlich können alle relevanten Systemparameter z.B. für die Schnittstelle, die Übertragungsdaten und Gerätefunktionen eingestellt werden. Zum Erstellen einfacher Steuerprogramme für die Dialoggeräte, steht ein grafischer Kontaktplan-Editor (KOP) nach IEC 61131-3 zur Verfügung. Es können logische; arithmetische und zeitabhängige Operationen (Timer) programmiert werden. Sie können in Verbindung mit Variablen, Tasten, Bild- und Meldeaufrufe und sonstigen Aktionen kombiniert werden. Einfache, zeitunkritische Aufgaben können so außerhalb der Steuerung realisiert werden um diese zu entlasten. • Geräteparametrierung • Bild- und Meldungserstellung • Variablenverwaltung • Menüstrukturverwaltung • Erstellung aktiver und passiver Grafiken • Dokumentation Kontaktplan-Editor (KOP) \DATEN\100\DB-FORM—PZD/03/12/96 • Schaltfunktionen nach IEC61131-3 • Logische Operatoren • Vergleichsoperatoren • Rechenoperatoren • Merker • Bild-/Meldungsaufrufe • Tasten- und LEDVerarbeitung Systemvoraussetzungen Hinweis ifm electronic gmbh • Teichstraße 4 • 45 127 Essen IBM kompatibler PC mit Pentium Prozessor, 1 freie serielle Schnittstelle oder CAN-PC-Interface USB-Port zur Kontaktplaneditor-Freigabe per Dongle MS Windows ® 3.1 , 95 , 98 , 2000 , ME , XP , NT4 (SP6) Festplatte: min. 7 MB / RAM: min. 4 MB Kostenlose Software (ohne Kontaktplaneditor) auf Anfrage oder im Internet unter „www.ifm-electronic.com“ (Service → Download) Technische Änderungen behalten wir uns ohne Ankündigung vor! CP9005 / Seite 1 28.07.2003 Control systems CP9005 Editor ecolog tdm R 360 Programming and setting of parameters for the dialogue modules ecomat tdm R 360 Simple control functions via ladder diagram programming according to IEC 61131-3 Application Function Program functions for dialogue modules ecomat tdm R 360 (order no. CR10xx) The editor enables to create texts, to draw graphics and images and to define variables. These entries can be conveniently made via the PC editor under MS-Windows. In addition, all important system parameters, e.g. interfaces, transmission data as well as functions and setting of the unit can be entered or changed via the editor. In case of need, the operating system together with the other data can be loaded into the maintenance-free flash memory, and thus it can be updated any time. To create simple control programs for the dialogue module a corresponding tool is integrated into the editor which allows to create a ladder diagram (LD) at graphic level according to IEC 61131-3. It is possible to program logic, arithmetic and time dependent operations (timer). They can be combined with variables, keys, images/message calls and other actions. So simpler, time-independent tasks can be accomplished outside the controller to support it to perform the important tasks. • Setting the parameters of the module • Creation of images and messages • Management of variables and menu structures • Creation of active and passive graphics • Documentation Ladder diagram editor (LD) \DATEN\100\DB-FORM—PZD/03/12/96 • Switching functions according to IEC61131-3 • Logic operators • Comparison operators • Arithmetic operators • Flags • Image/message calls • Key and LED processing System requirements Note ifm electronic gmbh • Teichstraße 4 • 45 127 Essen IBM PC or compatible with Pentium processor, 1 free serial interface or CAN-PC interface USB port for releasing the ladder diagram editor via a dongle MS Windows ® 3.1 , 95 , 98 , 2000 , ME , XP , NT4 (SP6) Hard disk: min. 7 MB / RAM: min. 4 MB see also „www.ifm-electronic.com“ (Service → Download) We reserve the right to make technical alterations without prior notice. CP9005 / page 1 28.07.2003 Système de contrôle-commande CP9005 Logiciel de programmation ecolog tdm R 360 Programmation et paramétrage d'unités de dialogue ecomat tdm R 360 Fonction de commande simple par programmation langage à contacts selon CEI 61131-3 Application Fonction Aperçu des fonctions du programme Pour des unités de dialogue ecomat tdm R 360 (référence CR10xx) Le programme permet de créer des textes, de dessiner des graphiques et des images et de déterminer des variables. Ceci se fait à partir d'un PC en environnement MS-Windows. De plus, tous les paramètres de système nécessaires, par ex. les interfaces, les données de transmission et les fonctions de l'appareil peuvent être programmés. Un éditeur graphique langage à contacts (ladder) selon CEI 61131-3 est disponible pour créer des programmes de commande simples pour les unités de dialogue. Des opérations logiques, arithmétiques, éventuellement cadencées par horloge peuvent être programmées. Elles peuvent être combinées avec des variables, des boutons, des appels d'images et de messages et d'autres actions. Des tâches simples, sans contraintes temporelles peuvent ainsi être réalisées hors de l'unité de commande afin de la décharger. • Paramétrage de l'appareil • Création d'images et de messages • Administration de variables • Administration des structures du menu • Création de graphiques actifs et passifs • Documentation Editeur langage à contacts (ladder) \DATEN\100\DB-FORM—PZD/03/12/96 • Fonctions de commutation selon CEI 61131-3 • Opérateurs logiques • Opérateurs de comparaison • Opérateurs de calcul • Drapeaux • Appels d'images/messages • Traitement de boutons et LED Exigences du système Remarque ifm electronic gmbh • Teichstraße 4 • 45 127 Essen PC compatible IBM avec processeur Pentium, 1 interface série libre ou interface CAN-PC Port USB pour la validation de l'éditeur langage à contacts par dongle MS Windows ® 3.1 , 95 , 98 , 2000 , ME , XP , NT4 (SP6) Disque dur: 7 MB minimum / RAM: 4 MB minimum Logiciel gratuit (sans éditeur langage à contacts) sur demande ou sur l'internet sous « www.ifm-electronic.com » (Service → Download) Nous nous réservons le droit de modifier les données techniques sans préavis. CP9005 / page 1 28.07.2003