FF 100/40 - CPR
Transcription
FF 100/40 - CPR
FF 100/40 Flexible mechanical expansion joint for finished floors for corner of pavement or wall Joint de structure pour sols version à angle sol mur DESCRIPTION/DESCRIPTION: The joint is made from aluminiu (the profiles are supplied undrilled). Standard length: 3,00 ml. La structure est réalisée en aluminium (les profilés sont livrés non percés). Longueur standard: 3,00 ml. FLEXIBLE INSERT/ INSERT SOUPLE: The interchangeable flexible seal is made from DUTRAL (EPDM), guaranteeing expansion and contraction of the joint, (resistant to atmospheric corrosion and temperature variations from -35°C to +120°C). The seal is available in rolls of up to 25 metres in length. Insert colours: grey or black La partie centrale élastique, interchangeable, en DUTRAL (EPDM), procure au joint le mouvement de dilation et de contraction, (résistant aux agents atmosphériques et aux variations thermiques de 35°C 120°C).La partie souple peut être fournie en rouleaux jusqu’à 25 ml. Couleurs de l’insert: gris et noir. ASSEMBLING**/MONTAGE** Mounted using fixing plugs every inear meter (1every 30 cm alternately on each side of the profile. Le montage s’effectue par le biais de chevilles mécaniques, une tous les 30 cm posées en quinconces depart et d’autre du profilé. VERSION OF JOINT WITH TALL BRACKET-HIGH /VERSION JOINT AVEC BRIDE HAUTE-HIGH Art. FF 100/40 mm* 40 mm* 13 mm* 115 Mov. mm +/-7 VERSION OF JOINT WITH SHORT BRACKET -LOW/ VERSION JOINT AVEC BRIDE BASSE-LOW *tolerance +/- 2mm *tolérance +/- 2mm This drawing is our property and can't be reproduced or transmitted to other persons without our authorization GIUNTI DI STRUTTURA ANTISISMICI PER PAVIMENTI E RIVESTIMENTI. GIUNTI DI COSTRUZIONE. GIUNTI DI FRAZIONAMENTO. PROFILI DI FINITURA.