MOTO - Bo?te d?alimentation non inclus
Transcription
MOTO - Bo?te d?alimentation non inclus
MOTO - Bo?te d?alimentation non inclus Polycarbonate screen W5130-16 SC EAN13: 0 AMENAGEMENTS URBAINS Donnees techniques Puissance: 72W Lampe: 72W, LED, 3000K, 7600lm, 70CRI, 700mA Cablage: SC Dimensions: H = 212mm, D = 201mm, L = 227mm Poids: 4 Kg. Lumen apparail: 6550lm Couleur: 16 Gris Description Luminaire Corps en fonte d'aluminium injecté sous pression (EN 47100). Peinture par poudre polyester double couche stabilisée aux rayons UV, résistant à la corrosion et aux ambiances marines. Joints en silicone. Visserie extérieure en acier inox AISI 316. Driver avec protection contre les pics de surtension, jusqu’à 6kV. Réflecteur en polycarbonate métallisé sous vide. Pour version RGB : lentilles LED en PMMA d'excellente qualité optique avec haute résistance aux rayons UV et aux températures élevées. Vitre en polycarbonate opale stabilisé aux rayons UV, résistant à l’essai au fil incandescent 850°C, auto-extinguible V0 ou en verre trempé de 8mm d'épaisseur résistant aux chocs thermiques. Goniomètre gradué pour le réglage. Conforme aux normes EN 60598-1 et EN 60598-2-5. Source LED avec efficacité nominale jusqu'à 115lm/W (4000K - 700 mA - CRI >80 - Tj = 85°C). Durée de vie élevée des LED : > 50 000 heures L80. Faible différence chromatique <3 SDCM. Module LED protégé contre la surchauffe. Installation Boîtier appareillage en fonte d'aluminium injecté sous pression (EN 47100). Presse-étoupe M20 en matériau thermoplastique. Étrier de fixation en acier galvanisé et verni. Ces appareils sont compatibles avec les systèmes modernes de gestion de l'éclairage. Texte d'appel d'offres Architectural high power floodlight characterized by modern design common to an extended family of fixtures. The same modern design can be found in ground, wall or ceiling recessed versions; or wall, ceiling surface mounted options and high power for high mast area lighting. The luminaire is composed of a die-cast aluminium body (EN 47100) with separate, for better heat management, die-cast control gear box, finished with a double layer of polyester powder paint resistant to corrosion and salt spray fog. Two options are available for the screen: 8mm thermal-shock resistant tempered glass screen for exterior application (IP66, IK10) or clear polycarbonate for interior application (IP65, IK09). All gaskets are of silicone rubber while all external screws are of AISI 316 stainless steel. Available with different power ratings 40W/72W, high resilience to voltage surges and a wide choice of optics (ultra-narrow, narrow, medium, wide, ultra-wide, elliptical, wall-washer and asymmetrical) it allows a perfect illumination for each application. The white LED source, available with 3000K/4000K/5000K correlated colour temperature, has a nominal efficacy of up to 118lumen/Watt (4000K - 700mA - CRI>80 - Tj=85°C) with a high colour consistency of <3 SDCM and a life time of more than 50000h with L80. It is also available with RGB LEDs for graphic illumination and is suitable for modern control systems to achieve dynamic lighting scenarios. As Arcluce MOTO. 20°