SIEGENIA - BS6375 PT1 Last Updated
Transcription
SIEGENIA - BS6375 PT1 Last Updated
Mila Test Centre 11 Brunel Close Drayton Field Industrial Estate Daventry Northamptonshire NN11 8RB Test No: T291 Test of: TBT window Tested to: BS6375-1:2009 Performance of windows and doors Part 1: Classification for weathertightness and guidance on selection and specification. For: Siegenia (UK) Ltd. Richardson Way Cross Point Coventry CV2 2TA Test No. T291 CLASSIFICATION FOR WEATHERTIGHTNESS BS 6375-1:2009 Table of Contents PERFORMANCE SUMMARY ............................................................................................................... 3 AUTHORISATION ................................................................................................................................. 4 TEST DETAILS ....................................................................................................................................... 5 SCHEDULE OF COMPONENTS ........................................................................................................... 6 TEST SAMPLE ........................................................................................................................................ 8 TEST PROCEDURE ................................................................................................................................ 9 TESTS AND RESULTS ........................................................................................................................ 11 CONCLUSIONS .................................................................................................................................... 12 LIMITATIONS ...................................................................................................................................... 12 Limitations.......................................................................................................................................... 12 Range of sample assemblies covered by this report ........................................................................... 12 Exclusions .......................................................................................................................................... 12 APPENDIX ............................................................................................................................................ 13 Customer Ref: Page 2 of 13 CLASSIFICATION FOR WEATHERTIGHTNESS BS 6375-1:2009 Test No. T291 PERFORMANCE SUMMARY Samples of; Manufacturer: Product: Model: Tested in accordance with: By: Located at: Results Clause 6 7 8 Metal Technology Ltd TBT window BS 6375-1:2009 Mila Test Centre, UKAS accredited Testing Laboratory No. 2235 11 Brunel Close, Drayton Fields Ind. Est., Daventry. Northamptonshire. NN11 8RB Description Air permeability Watertightness Resistance to wind Class 4 E750A CE2400 The results of weathertightness testing classified the sample as: EXPOSURE CATEGORY 2000+ as defined within: BS 6375-1:2009 Performance of windows and doors Part1: Classification for weathertightness and guidance on selection and specification Customer Ref: Page 3 of 13 Test No. T291 CLASSIFICATION FOR WEATHERTIGHTNESS BS 6375-1:2009 AUTHORISATION Test conducted by: Adrian Hastings Test Centre Manager Witnessed by: Gary Davies Siegenia (UK) Ltd. Report issued by: Adrian Hastings Test Centre Manager Report authorised by: Strafford Cooke Technical Manager Signed: Date: 14th September 2012 For and on behalf of Mila Test Centre Report issued: 14th September 2012 This report is confidential to the testing laboratory and the client. The information contained within is the property of the client who remains the sole authority for any copying. However, if copying is authorised, the report must be reproduced in full. Part copies of selected sections of the report are not permitted unless prior written approval is obtained from the testing laboratory. Heywood Williams Components Ltd. trading as Mila Hardware operating as Mila Test Centre UKAS Accredited Testing Laboratory No: 2235 C/o Mila Hardware 1 Brunel Close Drayton Fields Industrial Estate Daventry Tel: 01327 311165 Northamptonshire Fax: 01327 876064 NN11 8RB Customer Ref: Page 4 of 13 CLASSIFICATION FOR WEATHERTIGHTNESS BS 6375-1:2009 Test No. T291 TEST DETAILS Test Number: T291 Test Subject: Weathertightness Test Specification: BS 6375-1:2009 Performance of windows and doors Part 1: Classification for weathertightness and guidance on selection and specification. Report Dated: 6th September 2012 Date Tested: 15th August 2012 Items Tested: TBT window, as detailed within this report Customer Reference: Client Details: Customer Ref: Siegenia (UK) Ltd. Richardson Way Cross Point Coventry CV2 2TA Page 5 of 13 CLASSIFICATION FOR WEATHERTIGHTNESS BS 6375-1:2009 Test No. T291 SCHEDULE OF COMPONENTS Description TBT window assembly comprising of an aluminium outer frame into which is mounted a single aluminium framed casement with full glazed infill. Sizes Overall outer frame; Overall leaf; Leaf glass infill, visible size; Leaf glass infill, visible area; Material Metal Technology Aluminium H5-35 Hi 1.005 m wide x 1.555 m high. 0.950 m wide x 1.500 m high. 0.790 m wide x 1.340 m high. 1.059 m2 Frame: 602-201 Reinforcement: N/A Casement: 632-662 Reinforcement: N/A Mullion: N/A Reinforcement: N/A Colour Aluminium Construction All joints mitred, crimped and sealed Weatherseal Frame: 6063 external and 6061 centre seal Casement: 060B Glazing Method Dry Glazed: Internal- Bead: 628 Gasket: CA27 External- Bead: N/A Gasket: 6080 Glazing 28mm double glazed insulating glass unit (Toughened glass). Infill Panel N/A No. of samples 1 Where more than one sample of a single style was supplied for assessment, in keeping with the requirements of BS 6375-1:2009, all samples were as identical as production methods permit and selection to nominate sample number for the purpose of assigning test sequences was at the discretion of the Test Centre personnel. Customer Ref: Page 6 of 13 Test No. T291 CLASSIFICATION FOR WEATHERTIGHTNESS BS 6375-1:2009 Hardware and Fastenings per sample Quantity Description 1 Top Hinge - Scissor Arm 1 Top hinge to sash - F2 axxent sz.4 1S-RS 3 Hinge to frame fastening – CSK 3.9 x 19 7 Stay to sash fastening – CSK 3.9 x 25 1 Bottom hinge – V-V 18 LH 1 Bottom hinge to sash – Axxent corner hinge 4 Bottom hinge to frame fastening – CSK 3.9 x 19 4 Bottom hinge to casement fastening CSK 3.9 x 25 1 Handle side top corner – corner drive VSO 1 Handle side bottom corner – VSU S-ES FH/9 1 Drive gear – Gear 3 sz.3(mv) 1 Back centre lock – back slider BS 1 Bottom centre lock – Centre lock SZ.50 33 Gear fastenings – CSK 3.9 x 25 1 Tilt Keeper – Tilt bearing S-ES TBT A1320/1 LH 1 Tilt keeper fastenings – CSK 3.9 x 25 7 Compression keeper – A2820/2 1 Compression keeper fastenings – CSK 3.9 x 25 1 Mishandling device 1 Handle – Tokyo TBT 4 key locking 2 Handle fixings – M5 x 50mm Customer Ref: Manufacturer Siegenia-Aubi Siegenia-Aubi Siegenia-Aubi Siegenia-Aubi Client Reference TSAV0432-100040 TSSV0260-100042 00373 00368 TMEV0062-100040 TBEB0020-100051 00373 00368 Siegenia-Aubi Siegenia-Aubi FEUL0230-100050 FEUL1070-100040 Siegenia-Aubi Siegenia-Aubi Siegenia-Aubi 281734 FEUL2230-100040 276266 00368 FRKB0032-100060 Siegenia-Aubi Siegenia-Aubi Siegenia-Aubi 00368 NRSA0210-100010 00368 275122 1958641 Machine Screw Page 7 of 13 CLASSIFICATION FOR WEATHERTIGHTNESS BS 6375-1:2009 Test No. T291 TEST SAMPLE Figure 1. diagram of sample viewed from inside. Drawing not to scale. 1005mm A C B 1555mm C B C C E Customer Ref: B D (A) Stay Hinge / Scissor Stay (B) Sealing Cam and Keep (C) Mushroom Cam and Keep (D) Tilt Bearing (E) Bottom Hinge Page 8 of 13 CLASSIFICATION FOR WEATHERTIGHTNESS BS 6375-1:2009 Test No. T291 TEST PROCEDURE Introduction This test report should be read in conjunction with the Standard BS63751:2009 Performance of windows and doors - Part 1: Classification for weathertightness and guidance on selection and specification. The specimens were judged on their ability to comply with the performance criteria as required in BS 6375-1:2009 Clauses 6 to 8. Instruction to Test At the request of the customer named within this report, the sample assembly was tested using test methods specified within: BS 6375-1:2009 Performance of doors and windows – Part 1: Classification for weathertightness and guidance on selection and specification. And detailed within: BS EN 1026 BS EN 1027:2000 BS EN 12211 Test Equipment Windows and doors – Air permeability – Test method. Windows and doors – Watertightness – Test method. Windows and doors – Resistance to wind load – Test method Mila Test Rigs Nos. 02 and 11, purpose designed and built for the application of tests as described within BS 6375-1:2009. All equipment used for the measurement of time, force, distance, pressure or flow, is calibrated, with traceability to National Standards, using UKAS Accredited Testing Laboratories. At the time of this test all equipment was within its calibration period and all recorded results within the tolerances permitted by the Test Standard. Mounting of Test Specimen In keeping with the requirements detailed within BS 6375-1:2009 the test sample was delivered mounted into a sub-frame made from 100mm x 75mm (Nominal) timber. Mounting screws being driven from opening cavity of outer frame, through the frame section and into timber sub-frame, so as to simulate normal installation work practice. All joints between sample and test apparatus were sealed. Installation The complete assemblies were installed plumb and square in the test rigs and checked for overlap (cover) at the frame over-rebate flanges, perimeter gap / clearances and correct operation. Customer Ref: Page 9 of 13 CLASSIFICATION FOR WEATHERTIGHTNESS BS 6375-1:2009 Test No. T291 Test Climate TEMPERATURE: Minimum 18 °C Maximum 22 °C HUMIDITY: 40 %Rh Maximum 45 %Rh ATMOSPHERIC PRESSURE: WATER TEMPERATURE: Test Methods Minimum 1004.0 Hpa 17 °C Air infiltration characteristics were determined in accordance with BS EN 1026:200 . Air flow through the test sample was measured at pressure differential increments until the required test criterion. By calculation, air flow was redefined as permeability relative to total length of opening joints and average leakage per metre square of specimen area. Water penetration characteristics were determined in accordance with BS EN 1027. During the initial period of 15 minutes, air pressure was not applied. Following this 15 minutes soaking, air pressure was applied in specified increments and held for 5 minute intervals at each increment. Regular checks for water penetration were made. Ability to Resist Wind loads were determined in accordance with BS EN 12211using the interpretation outlined within BS 6375:Pt 1:2009. During the test, 50 pulses at a pressure predetermined by the classification required were applied in the negative and positive direction. Customer Ref: Page 10 of 13 CLASSIFICATION FOR WEATHERTIGHTNESS BS 6375-1:2009 Test No. T291 TESTS AND RESULTS Clause Result Pass/Fail For full results see Appendix. * * Customer Ref: * * * * * END OF TESTING * * * * * * Page 11 of 13 CLASSIFICATION FOR WEATHERTIGHTNESS BS 6375-1:2009 Test No. T291 CONCLUSIONS Evaluation The sample assembly completed all performance requirements and met the criterion for: EXPOSURE CATEGORY 2000 as defined within: BS 6375-1:2009 Performance of windows and doors Part1: Classification for weathertightness and guidance on selection and specification LIMITATIONS Limitations The results obtained are only relevant to the conditions applicable at the time of testing and do not necessarily relate to samples from the production line, nor do they imply performance or quality of the continuing production. Range of sample assemblies covered by this report This report relates to a range of sample assemblies manufactured from the items as identified within this report and are limited to: Exclusions Assemblies with identical hardware fitted no further apart than in the tested assembly Assemblies of the same or smaller overall dimensions to the tested assembly This report relates to a range of sample assemblies manufactured from the items as identified, selected, submitted and tested and to that range alone. Details of the sample system and hardware used are supplied by the client and / or persons acting on their behalf and the onus for the accuracy of those details rest with the client. This report is an assessment of the complete sample system. It is NOT an assessment of the individual items used to manufacture the complete unit, nor is it an assessment of the manufacturer’s production control either before or after the issue of this report. The results and conclusions shown in this report are given in good faith. Mila Test Centre accepts no liability or responsibility for any loss or damage occurring from the use of same. All tests reported within this document were conducted in accordance with our scope of UKAS accreditation. However, accreditation includes only factual reporting therefore any expression of opinion and interpretation are outside and excluded from that scope of accreditation. Customer Ref: Page 12 of 13 Test No. T291 CLASSIFICATION FOR WEATHERTIGHTNESS BS 6375-1:2009 APPENDIX Customer Ref: Page 13 of 13