Wi-Fi access points

87045 LIMOGES Cedex France
Telephone: (+33) 05 55 06 87 87 - Fax: (+33) 05 55 06 88 88
CélianeTM
Catalogue number(s): 0 673 62/63
Wi-Fi access points
CONTENTS
1.
2.
3.
4.
5.
6.
7.
8.
9.
1. USE
Page
Use . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Range . . . . . . . . . . . . . . . . . . . . . . . . . 1
Dimensions . . . . . . . . . . . . . . . . . . . . . 1
Mounting . . . . . . . . . . . . . . . . . . . . . . . 1
Connection . . . . . . . . . . . . . . . . . . . . . 2
General characteristics . . . . . . . . . . . . 2
Additional information . . . . . . . . . . . . . 3
Standards . . . . . . . . . . . . . . . . . . . . . . 3
Compliance - approvals . . . . . . . . . . . 3
3. DIMENSIONS
The Wi-Fi access point provides wireless network access to one or
more devices with Wi-Fi communication capability in accordance with
standard IEEE 802.11b/g/n (operation on 2.4 GHz frequency band).
163
80.8
84
The communication range is a few dozen metres depending on the
environment. Several Wi-Fi access points can be used in remote
locations to extend the Wi-Fi coverage.
Wi-Fi data exchanges can be protected using various levels of
encryption (WEP, WPA or WPA2/802.11i) to restrict network access
to authorised computers/devices only. The Wi-Fi access point permits
a maximum data rate of 300 Mbps in 40 MHz channel width mode and
144 Mbps in 20 MHz channel width mode (mode selected by default).
2. RANGE
82
Description
No. of
devices
Cat. No.
Weight (g)
Single-band 802.11 b/g/n
Wi-Fi access points
White
2
0 673 62
156
Single-band 802.11 b/g/n
Wi-Fi access points
Titanium
2
25.8
15°
4. MOUNTING
0 673 63
156
Products are installed in 50 mm deep Batibox boxes.
Mechanisms are flush-mounted or surface-mounted.
The height at which an access point is installed on a wall does not
affect the range or the speed.
50
mm
1
2
3
1- Screw the mechanism onto the flush-mounting box.
2- Clip the plate onto the mechanism.
3- Clip the cover plate onto the plate.
Technical data sheet: F00608EN/02
Updated on: 11/03/2013
Created: 11/09/2008
1/3
CélianeTM
Catalogue number(s): 0 673 62/63
5. CONNECTION
6. GENERAL CHARACTERISTICS (continued)
Wi-Fi access points
12345678
12345678
EIA 568 A
EIA 568 B
SF/UTP
U/UTP
332 62
2
332 62
3
50 mm min.
1
U/UTP
1
80 mm min.
4
SF/UTP
Tool-free cable connection.
The link should be no longer than 90 metres.
6. GENERAL CHARACTERISTICS
- The access point can be configured and administered via an intuitive
web interface.
- Free firmware updates available on the Legrand website.
A USB dongle containing the tools can be used to configure the access
point.
- Access point mode (wired rear connection, wireless network broadcasting for Wi-Fi clients)
- Universal repeater mode (wireless connection to another access point,
local retransmission of the wireless signal for Wi-Fi clients)
- Number of aerials: two omnidirectional aerials integrated in the product
- Ethernet interface: 10/100 Base T, RJ45, tool-free connection
- Wi-Fi interface: the access point can be used for operation in 2.4 GHz,
802.11 b/g/n
- Transmission frequencies (channels) automatically adapt to the
country of use
- Frequency band: - 802.11b/g/n: 2.4 GHz ISM to 2.48 GHz ISM
20 or 40 MHz channel width
- Signal strength adjustable (from 15% to 100%), in order to reduce
or increase the coverage area and thus increase the density of Wi-Fi
terminals
- Minimal electricity consumption:
Power consumption
-
No Wi-Fi client
connected
1 Wi-Fi client
connected,
without traffic
1 Wi-Fi client
connected,
with traffic
1.55 W
2.00 W
2.50 W
-
Recommended minimum protection level: WPA-PSK
WPS Wi-Fi protected setup (PIN, PBC)
Filtering by Wi-Fi MAC address
Wi-Fi activation/deactivation scheduling
Site-survey mode (display of nearby Wi-Fi networks)
Manual or automatic transmission channel setting
Both 20 and 40 MHz channel widths supported
Service class supported (WMM standard for Wi-Fi Multimedia)
Automatic time setting (NTP)
Backing up and restoring the configuration
Spanning Tree (STP)
WDS mode (Wireless Distribution System)
DHCP client mode, or static IP addressing
DHCP server mode
6.1 Characteristics of the materials
• Faceplate
Polycarbonate
6.2 Climatic characteristics
-
Operating temperature: + 5°C to + 40°C
Storage temperature: 0°C to + 60°C
Maximum humidity during operation: 85%
Maximum storage humidity: 85%
6.3 Electrical characteristics
• Connector
Permitted conductors:
- Single-core: 0.5 to 0.65 mm, AWG 24 to 22
- Polyethylene conductor insulation: Ø max. on 1.5 mm insulation
Number of wires to be connected per connection: 1
Max. number of connections/disconnections: 5 (2 without replacing
the wire).
Breakdown voltage: 1000 V
Contact resistance: 20 MOhms
Insulation resistance: 500 MOhms at 100 VDC
• Faceplate
Self-extinguishing: 750°C/5 s
UPnP: compatible
Administration interface: HTTP
Static or dynamic IP addressing (DHCP)
Authentication: shared key or 802.1x (Radius server)
Encryption (in order from least to most secure):
None
No protection
WEP
Minimum protection level
WPA
TKIP or AES encryption
WPA-2
Also called 802.11i, TKIP or AES encryption
WPA2-mixed mode
Simultaneous compatibility with WPA and
WPA2 terminals
Technical data sheet: F00608EN/02
Updated on: 11/03/2013
Created: 11/09/2008
2/3
CélianeTM
Catalogue number(s): 0 673 62/63
7. ADDITIONAL INFORMATION
8. STANDARDS
Principle of reduction of the speed due to management of the Wi-Fi
network, sharing between users, distance and environment.
The access point is compatible with the following standards:
- 802.11b: Radio transmission standard
- 802.11g: Radio transmission standard
- 802.11n: Radio transmission standard
- 802.1x: Identification standard (EAP TLS, EAP TTLS, PEAP).
Identification is handled by a Radius server.
- 802.11i: Transmitted data encryption mode, also called WPA2.
- WMM service class: Quality of service support, for example for
voice over IP (VolP)
Wi-Fi access points
Example in 802.11n:
Maximum data rate of 300 Mbps in 40 MHz channel width mode
Wi-Fi
300
54Mbps
Mbps
9. COMPLIANCE - APPROVALS
Gross speed
Speed reserved for Wi-Fi
network management
- Encryption
- Identification/management
- Etc
140
54Mbps
Mbps
DECLARATION
Net speed
La Directive 1999/5/CE du Parlement européen
et du Conseil du 9 Mars 1999 "R & TTE"
Net speed to be shared
between all users
12 Mbps
Sous réserve d'une utilisation conforme à sa destination
et / ou d'une installation conforme aux normes en vigueur
et / ou aux recommandations du constructeur
On condition that they are used in the manner
intended and/or in accordance with the current
installation standards andlor with the manufacturers
recommandations
La libération des canaux est sous la responsabilité de
chaque pays. L'administrateur réseaux sans fil doit configurer
le pays. Ainsi les canaux seront automatiquement
en conformité avec les dispositions du pays.
Channel availability depends on local country regulations.
Wireless LAN system administrator must choose correct
country of operation. Channels are then automatically
configurated to comply with s pecified country's regulations.
Ces dispositions sont assurées pour la directive 1999/5/CE par la conformité aux normes suivantes:
These provisions are ensured for directive 1999/5/CEE by conformity to the following standards :
6 Mbps
EN 301 489-17
EN 60950
EN 300 328
EN 301 489-1
2 Mbps
0 Mbps
Detection but
insufficient speed
DE CONFORMITE
Nous déclarons que les produits satisfont aux dispositions de :
We declare that the products satisfy the provisions of :
X
Speed available to the
device varies according
to the distance and the
environment
No detection
Technical data sheet: F00608EN/02
Updated on: 11/03/2013
Created: 11/09/2008
3/3