528 kB
Transcription
528 kB
ISO Update Supplement to ISO Focus+ January 2013 People and places ISO Members 2 International Standards in process from 1 to 31 December 2012 Committee Drafts (CD) registered 3 Draft International Standards (DIS) circulated 5 Final draft International Standards (FDIS) circulated 7 Standards published 9 Standards confirmed 14 Standards withdrawn 15 Meeting calendar 15 People and places ISO Members Since the December 2012 issue of ISO Update Supplement to ISO Focus+, the following changes affecting ISO members have occurred: Membership change New CEOs Member body: Member bodies The membership status for Mali has been transferred to the Agence Malienne de Normalisation et de Promotion de la Qualité (AMANORM). Their contact details read as follows: ARGENTINA (IRAM) MALI (AMANORM) Agence Malienne de Normalisation et de Promotion de la Qualité (AMANORM) Hippodrome Bamako (Ex-Tribunal du commerce de la commune II) BAMAKO Directeur Général : M. Yaya Niafo Tel. Fax E-mail +223 20 29 57 60 +223 20 29 61 38 [email protected] Director General: Mr. Luis Trama INDIA (BIS) Director General: Mr. Afzal Amanullah SAINT LUCIA (SLBS) Director: Dr. Mkabi Walcott Correspondent members KYRGYZSTAN (KYRGYZST) Deputy Director: Mr. Muhamat Kaparov PALESTINE (PSI) Chief Executive Officer: (vacant) ZAMBIA (ZABS) Director: Mr Manuel Mutale 2 ISO Update, Supplement to ISO Focus+– January 2013 International Standards in process An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO technical committee. When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same. CD registered Period from 01 December to 31 December 2012 These documents are currently under consideration in the technical committee. They have been registred at the Central Secretariat. ISO/CD 23013 Road vehicles — Determination to forced entry of safety glass constructions used in vehicle glazing — Test of glazing systems TC 23 Tractors and machinery for agriculture and forestry ISO/CD 16414 Tractors and machinery for agriculture and forestry — Speed Identification Symbol (SIS) ISO/CD 24253-1 Crop protection equipment — Spray deposit tests of field crop sprayers — Part 1: Field deposit measurements TC 24 Particle characterization including sieving ISO/CD 15901-1 Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption — Part 1: Mercury porosimetry TC 29 Small tools ISO/CD TS 13399-80 Cutting tool data representation and exchange — Part 80: Concept for the design of 3D models based on properties according to ISO 13399 — Overview and principles ISO/CD TS 13399-202 Cutting tool data representation and exchange — Part 202: Concept for the design of 3D models based on properties according to ISO/ TS 13399-2 — Modeling of irregular inserts ISO/CD TS 13399-203 Cutting tool data representation and exchange — Part 203: Concept for the design of 3D models based on properties according to ISO/ TS 13399-2 — Modeling of exchangeable inserts for drilling TC 22 Road vehicles ISO/CD 17447-1 Road Vehicles — Glow-plugs with conical seating and their cylinder head housing — Part 1: Basic characteristics and dimensions for metal-sheath-type glow-plugs TC 44 Welding and allied processes ISO/CD 16237 Road Vehicles — Glow-plugs with conical seating and their cylinder head housing — Part 2: Basic characteristics and dimensions for ceramic-sheath-type glow-plugs Mechanical joining — Destructive testing of joints — Specimen dimensions and test procedure for cross-tension testing of single joints TC 61 Plastics ISO/CD 20200 Plastics — Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale test TC 76 Transfusion, infusion and injection, and blood processing equipment for medical and pharmaceutical use ISO/CD 3826-4 Plastics collapsible containers for human blood and blood components — Part 4: Aphaeresis blood bag systems with integrated features TC 84 Devices for administration of medicinal products and intravascular catheters ISO/CD 17447-2 ISO/CD 17447-3 Road Vehicles — Glow-plugs with conical seating and their cylinder head housing — Part 3: Tests and requirements ISO/CD 16844-4 Road vehicles — Tachograph systems — Part 4: CAN interface ISO/CD 16844-6 Road vehicles — Tachograph systems — Part 6: Diagnostics ISO/CD 16844-7 Road vehicles — Tachograph systems — Part 7: Parameters ISO/CD 17987-1 Road vehicles — Local Interconnect Network (LIN) — Part 1: General information and use case definition ISO/CD 11070 ISO/CD 17987-2 Road vehicles — Local Interconnect Network (LIN) — Part 2: Transport protocol and network layer services Sterile, single-use intravascular catheter introducers TC 85 Nuclear energy, nuclear technologies, and radiological protection ISO/CD 17987-3 Road vehicles — Local Interconnect Network (LIN) — Part 3: Protocol specification ISO/CD 16644-1 ISO/CD 17987-4 Road vehicles — Local Interconnect Network (LIN) — Part 4: Electrical Physical Layer (EPL) specification 12V/24V Quantification of patient activity in nuclear medicine — Part 1: Determination of iodine 131 activity using the conjugate view method TC 94 Personal safety -- Protective clothing and equipment ISO/CD 17987-5 Road vehicles — Local Interconnect Network (LIN) — Part 5: Application Programmers Interface (API) ISO/CD 16900-9 Respiratory protective devices — Methods of test and test equipment — Part 9: Determination of the carbon dioxide content of inhaled air ISO/CD 17987-6 Road vehicles — Local Interconnect Network (LIN) — Part 6: Protocol conformance test specification TC 118 Compressors and pneumatic tools, machines and equipment ISO/CD 17987-7 Road vehicles — Local Interconnect Network (LIN) — Part 7: Electrical Physical Layer (EPL) conformance test specification ISO 289278:2009/CD Amd 1 Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 8: Saws, polishing and filing machines with reciprocating action and small saws with oscillating or rotating action — Amendment 1 ISO Update, Supplement to ISO Focus -- January 2013 3 TC 215 Health informatics ISO/DTS 16791 Health informatics — Requirements for international machine-readable coding of medicinal product package identifiers ISO/CD 18623-1 Air compressors and compressed air systems — Air compressors — Part 1: Safety requirements TC 138 Plastics pipes, fittings and valves for the transport of fluids TC 218 Timber ISO/CD 3458 Assembled joints between fittings and polyethylene (PE) pressure pipes — Test of leakproofness under internal pressure ISO/CD 13061-13 ISO/CD 3459 Polyethylene (PE) pressure pipes — Joints assembled with mechanical fittings — Internal under-pressure test method and requirement Physical and mechanical properties of wood - Test methods for small clear specimen — Part 13: Determination of radial and tangential shrinkage TC 242 Energy Management ISO/CD 50003 Energy management system audits and auditor competency ISO/CD 50004 Guidance for the Implementation, Maintenance and Improvement of an EnMS ISO/CD 50006 Energy Baseline and Energy Performance Indicators (EnPIs) — General Principles and Guidance TC 257 General technical rules for determination of energy savings in renovation projects, industrial enterprises and regions ISO/CD 17743 Definition of a methodological framework applicable to calculation and reporting on energy savings ISO/CD 3501 Assembled joints between fittings and polyethylene (PE) pressure pipes — Test of resistance to pull out ISO/CD 3503 Assembled joints between fittings and polyethylene (PE) pressure pipes — Test of leakproofness under internal pressure when subjected to bending ISO/CD 13844 Plastics piping systems — Elastomericsealing-ring-type socket joints of unplasticized poly(vinyl chloride) (PVC-U) for use with PVC-U pipes — Test method for leaktightness under negative pressure ISO/CD 13845 Plastics piping systems — Elastomericsealing-ring-type socket joints for use with unplasticized poly(vinyl chloride) (PVC-U) pipes — Test method for leaktightness under internal pressure and with angular deflection TC 142 ISO/CD 12249-1 Cleaning equipment for air and other gases Particulate air filters for general ventilation — Part 1: Method of calculation for the life cycle cost for air cleaning devices TC 150 Implants for surgery ISO/CD 12417 Cardiovascular implants and extracorporeal systems — Vascular device-drug combination products TC 259 Project committee: Outsourcing ISO/CD 37500 Outsourcing JTC 1 Information technology ISO/IEC PDTS 38501 Information Technology — Corporate Governance of IT Implementation Guide ISO/IEC CD 27039 Information technology — Security techniques — Selection, deployment and operations of intrusion detection systems ISO/IEC CD 27041 Guidance on assuring suitability and adequacy of investigation methods ISO/IEC CD 27042 Guidelines for the analysis and interpretation of digital evidence ISO/IEC CD 27043 Investigation principles and processes ISO/IEC 1449610:2012/PDAM 3 Information technology — Coding of audio-visual objects — Part 10: Advanced Video Coding — Amendment 3: AVC compatible video-plusdepth extension Information technology — JPEG XR image coding system — Part 4: Conformance testing — Amendment 1: Additional JPEG XR conformance test streams TC 172 Optics and photonics ISO/CD 9849 Optics and optical instruments — Geodetic and surveying instruments — Vocabulary TC 173 Assistive products for persons with disability ISO/CD 17069 Accessible design — Consideration and assistive products for accessible meeting TC 190 Soil quality ISO/IEC 29199-4:2010/ PDAM 1 ISO/CD 17601 Soil Quality — Method to quantify the abundance of microbial communities from soil DNA extracts ISO/IEC CD 18004 Information technology — Automatic identification and data capture techniques — QR Code bar code symbology specification ISO/IEC CD 29167-16 Information technology — Automatic identification and data capture techniques — Part 16: Air Interface for security services crypto suite ECDSA-ECDH ISO/IEC CD 13249-3 Information technology — Database languages — SQL multimedia and application packages — Part 3: Spatial ISO/IEC CD 30119-2 Quality Standard for the Creation and Delivery of Fair, Valid and Reliable e-Tests — Part 2: Application guide with use cases TC 199 Safety of machinery ISO/DTR 18670 Safety of machinery — How ISO 12100 relates to ISO 13849-1 TC 204 Intelligent transport systems ISO/CD 13185-2 Intelligent transport systems — Vehicle interface for provisioning and support of ITS services — Part 2: Unified gateway protocol (UGP) requirements and specification for vehicle ITS station gateway (V-ITS-SG) interface TC 210 Quality management and corresponding general aspects for medical devices ISO/CD 18250 Connectors for enteral feed/solution reservoirs TC 214 Elevating work platforms ISO/CD 11988 Code of practise for the installation, maintenance, thorough examination and safe use of mast-climbing work platforms 4 ISO Update, Supplement to ISO Focus -- January 2013 TC 23 DIS circulated ISO/DIS 500-1 Tractors and machinery for agriculture and forestry * Period from 01 December to 31 December 2012 These documents have obtained substantial support within the appropriate ISO technical committee. They have been submitted to the ISO member bodies for voting by the date shown. ISO/DIS 500-3 * Available in English only * Vote terminates ISO 730:2009/ DAmd 1 TC 10 ISO/DIS 10628-1 Technical product documentation * TC 17 ISO/DIS 7778 * Diagrams for the chemical and petrochemical industry — Part 1: Specification of diagrams (Revision of ISO 10628:1997) 2013-05-14 TC 30 ISO/DIS 10790 Through-thickness characteristics for steel products * 2013-03-20 (Revision of ISO 7778:1983) ISO/DIS 15510 * Stainless steels — Chemical composition 2013-03-04 (Revision of ISO 15510:2010) ISO/DIS 16143-1 * Stainless steels for general purposes — Part 1: Flat products ISO/DIS 16143-3 * * Stainless steels for general purposes — Part 2: Semifinished products, bars, rods and sections (Revision of ISO 16143-2:2004) Stainless steels for general purposes — Part 3: Wire Equipment for fire protection and fire fighting ISO/DIS 7240-14.2 Fire detection and alarm systems — Part 14: Design, installation, commissioning and service of fire detection and fire alarm systems in and around buildings (Revision of ISO/TR 7240-14:2003) TC 22 * ISO 114527:2003/DAmd 1 * ISO/DIS 12617 * Road vehicles - Circuit breakers — Part 3: Miniature circuit breakers Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 7: Direct radio frequency (RF) power injection — Amendment 1 Liquefied natural gas vehicles — Connector for reflueling vehicles ISO Update, Supplement to ISO Focus -- January 2013 Sensory analysis — Methodology — General guidance for conducting hedonic tests with consumers in an controlled area Paints and varnishes ISO/DIS 4618 Paints and varnishes — Terms and definitions 2013-03-04 2013-03-03 2013-03-04 2013-03-31 2013-05-21 (Revision of ISO 4618:2006) TC 39 ISO/DIS 1985 Machine tools * 2013-03-04 TC 42 2013-02-05 ISO/DIS 18937 ISO/DIS 11819-2 * TC 44 ISO/DIS 9455-5 Imaging materials — Photographic reflection prints — Methods for measuring indoor light stability 2013-03-04 Acoustics — Method for measuring the influence of road surfaces on traffic noise — Part 2: Closeproximity (CPX) method 2013-05-21 Welding and allied processes * TC 61 ISO 103501:2007/DAmd 1.2 2013-03-21 Acoustics * 2013-03-28 2013-03-15 Machine tools — Test conditions for surface grinding machines with vertical grinding wheel spindle and reciprocating table — Testing of the accuracy (Revision of ISO 1985:1998) Photography TC 43 Road vehicles ISO/DIS 10924-3 Measurement of fluid flow in closed conduits — Guidance to the selection, installation and use of Coriolis meters (mass flow, density and volume flow measurements) (Revision of ISO 10790:1999, ISO 10790:1999/Amd 1:2003) TC 35 (Revision of ISO 16143-3:2005) TC 21 Agricultural wheeled tractors — Rear-mounted three-point linkage — Categories 1N, 1, 2N, 2, 3N, 3, 4N and 4 — Amendment 1 2013-03-03 Food products * 2013-03-04 (Revision of ISO 16143-1:2004) ISO/DIS 16143-2 TC 34 ISO/DIS 11136 Agricultural tractors — Rearmounted power take-off types 1, 2, 3 and 4 — Part 3: Main PTO dimensions and spline dimensions, location of PTO (Revision of ISO 500-3:2004) 2013-03-03 Measurement of fluid flow in closed conduits Steel * Agricultural tractors — Rearmounted power take-off types 1, 2, 3 and 4 — Part 1: General specifications, safety requirements, dimensions for master shield and clearance zone (Revision of ISO 500-1:2004, ISO 500-1:2004/Cor 1:2005) Soft soldering fluxes — Test methods — Part 5: Copper mirror test (Revision of ISO 9455-5:1992) 2013-05-21 Plastics * Plastics — Acquisition and presentation of comparable singlepoint data — Part 1: Moulding materials — Amendment 1 2013-02-28 5 ISO/DIS 11403-1 * TC 85 ISO/DIS 21483 * * * ISO/DIS 9374-3 * TC 102 * * * * 2013-03-09 Dentistry — Dental rubber dam technique — Part 2: Clamp forceps Mechanical vibration and shock — Signal processing — Part 3: Methods of time-frequency and time-scale analysis Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 8: Reciprocating compressor systems Sediment in streams and canals — Determination of concentration by surrogate techniques Plastics piping systems — Mechanical fittings for pressure piping systems — Specifications (Revision of ISO 108381:2000, ISO 10838-2:2000, ISO 14236:2000, ISO 10838-3:2001) * ISO/DIS 24504 * TC 160 ISO/DIS 13316 2013-03-11 Implants for surgery — Wear of total knee prostheses — Part 4: Wear of the patella-femoral joint — Loading and displacement parameters for wear-testing machines and corresponding environmental conditions for test 2013-03-11 Ergonomics Ergonomics of Human System Interaction — Part 391: Requirements, analysis and compliance test methods for the reduction of photosensitive seizures Ergonomics — Accessible design — Sound pressure levels of spoken announcements for products and public address systems 2013-05-07 2013-03-30 Glass in building * TC 162 Glass in building — Curved glass — Part 3: Requirements for thermally tempered and laminated curved safety glass 2013-03-15 Doors and windows * 2013-03-04 Terminology for doors and windows 2013-03-11 (Revision of ISO 1804:1972) TC 172 2013-05-14 ISO/DIS 12858-1 Optics and photonics * ISO/DIS 10343 ISO/DIS 22975-3 * ISO/DIS 13007-2 * 2013-03-11 Ceramic tiles — Grouts and adhesives — Part 2: Test methods for adhesives (Revision of ISO 13007-2:2010) 2013-03-22 Surface chemical analysis ISO 181151:2010/DAmd 1 * ISO 181152:2010/DAmd 1 * 2013-03-04 TC 206 ISO/DIS 17095 Solar Energy-Collector components and materials — Part 3: Absorber surface durability Ceramic tile TC 201 2013-03-11 2013-05-14 Solar energy TC 189 2013-02-08 2013-03-22 (Revision of ISO 10343:2009) TC 180 2013-03-16 Optics and optical instruments — Ancillary devices for geodetic instruments — Part 1: Invar levelling staffs (Revision of ISO 12858-1:1999) Ophthalmic instruments — Ophthalmometers 2013-03-11 Plastics pipes, fittings and valves for the transport of fluids * * ISO/DIS 9241-391 ISO/DIS 11485-3 Graphical symbols — Test methods — Part 3: Method for testing referent association Implants for surgery 2013-03-28 Hydrometry * TC 138 6 Iron ores — Determination of arsenic content — Hydride generation atomic absorption spectrometric method Condition monitoring and diagnostics of machines — Requirements for qualification and assessment of personnel — Part 2: Vibration condition monitoring (Revision of ISO 18436-2:2003) TC 113 ISO/DIS 17885 2013-03-05 Mechanical vibration, shock and condition monitoring ISO/DIS 18436-2.2 ISO/DIS 11657 Cranes — Information to be provided for enquiries, orders, offers and supply — Part 3: Tower cranes (Revision of ISO 9374-3:2002) * TC 159 Dentistry TC 108 ISO/DIS 10816-8 Cranes — Control layout and characteristics — Part 3: Tower cranes (Revision of ISO 7752-3:2010) Graphical symbols 2013-03-11 Iron ore and direct reduced iron TC 106 ISO/DIS 18431-3 Measurement of toxic gas production using FTIR technique for room corner test and open calorimetry ISO/DIS 9186-3 ISO/DIS 14243-4 Cranes ISO/DIS 7752-3 ISO/DIS 16635-2 Determination of Solubility in Nitric Acid of Plutonium in Unirradiated Mixed Oxide Fuel Pellets (U, Pu) O2 (Revision of ISO 12184:1994) TC 145 TC 150 Fire safety TC 96 ISO/DIS 17992 2013-05-21 Nuclear energy, nuclear technologies, and radiological protection TC 92 ISO/DIS 16405 Plastics — Acquisition and presentation of comparable multipoint data — Part 1: Mechanical properties (Revision of ISO 11403-1:2001) Surface chemical analysis — Vocabulary — Part 1: General terms and terms used in spectroscopy — Amendment 1 Surface chemical analysis — Vocabulary — Part 2: Terms used in scanning-probe microscopy — Amendment 1 2013-03-06 2013-03-06 Fine ceramics * Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for interfacial bond strength of ceramic materials at elevated temperatures 2013-03-13 ISO Update, Supplement to ISO Focus -- January 2013 TC 215 ISO/DIS 13940 Health informatics * JTC 1 ISO/IEC DIS 24771 ISO/IEC 10373-6:2011/ DAmd 6 * * ISO/IEC DIS 24727-1 * ISO/IEC DIS 30191 2013-05-14 Information technology * ISO/IEC 14443-3:2011/ DAmd 3 ISO/IEC DIS 30190 Health informatics — System of concepts to support continuity of care * * ISO/IEC DIS 30192 * ISO/IEC DIS 30193 * ISO/IEC 19794-2:2011/ DAmd 1 * ISO/IEC 19794-5:2011/ DAmd 1 * Information technology — Telecommunications and information exchange between systems — MAC/PHY standard for ad hoc wireless network to support QoS in an industrial work environment (Revision of ISO/IEC 24771:2009) Identification cards — Test methods — Part 6: Proximity cards — Amendment 6: Alternating between PICC and PCD functionalities Identification cards — Contactless integrated circuit cards — Proximity cards — Part 3: Initialization and anticollision — Amendment 3: Alternating support of PICC and PCD roles Identification cards — Integrated circuit card programming interfaces — Part 1: Architecture (Revision of ISO/IEC 24727-1:2007) Information technology — Digitally recorded media for information interchange and storage — 120 mm Single Layer (25,0 Gbytes per disk) and Dual Layer (50,0 Gbytes per disk) BD Recordable disk Information technology — Digitally recorded media for information interchange and storage — 120 mm Triple Layer (100,0 Gbytes per disk) and Quadruple Layer (128,0 Gbytes per disk) BD Recordable disk Information technology — Digitally recorded media for information interchange and storage — 120 mm Single Layer (25,0 Gbytes per disk) and Dual Layer (50,0 Gbytes per disk) BD Rewritable disk Information technology — Digitally recorded media for information interchange and storage — 120 mm Triple Layer (100,0 Gbytes per disk) BD Rewritable disk Information technology — Biometric data interchange formats — Part 2: Finger minutiae data — Amendment 1: Conformance testing methodology Information technology — Biometric data interchange formats — Part 5: Face image data — Amendment 1: Conformance testing methodology and clarification defects FDIS circulated Period from 01 December to 31 December 2012 2013-03-14 These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date shown * Available in English only Vote terminates 2013-03-08 IIW ISO/FDIS 6847 2013-03-08 ISO/FDIS 14346 * * TC 23 2013-03-19 ISO/FDIS 16231-1 2013-03-15 Welding consumables — Deposition of a weld metal pad for chemical analysis (Revision of ISO 6847:2000) Static design procedure for welded hollow-section joints — Recommendations 2013-02-21 2013-02-05 Tractors and machinery for agriculture and forestry * TC 29 Self-propelled agricultural machinery — Assessment of stability — Part 1: Principles 2013-02-07 Small tools ISO/FDIS 236-2 * ISO/FDIS 3438 * Reamers — Part 2: Long fluted machine reamers with Morse taper shanks (Revision of ISO 236-2:1976) Subland twist drills for holes prior to tapping screw threads 2013-02-04 2013-02-07 (Revision of ISO 3438:2003, ISO 3439:2003) 2013-03-15 ISO/FDIS 9284 * Abrasive grains — Test-sieving machines 2013-02-22 (Revision of ISO 9284:1992) TC 34 Food products 2013-03-15 ISO/FDIS 5530-1 * 2013-03-15 ISO/FDIS 17180 * ISO 21569:2005/ FDAmd 1 * 2013-03-15 TC 39 2013-03-15 ISO/FDIS 28881 Wheat flour — Physical characteristics of doughs — Part 1: Determination of water absorption and rheological properties using a farinograph (Revision of ISO 5530-3:1988, ISO 5530-1:1997) Animal feeding stuffs — Determination of lysine, methionine and threonine in commercial amino acid products and premixtures Foodstuffs — Methods of analysis for the detection of genetically modified organisms and derived products — Qualitative nucleic acid based methods — Amendment 1 2013-02-12 2013-02-21 2013-02-14 Machine tools * TC 44 ISO/FDIS 15614-14 ISO Update, Supplement to ISO Focus -- January 2013 International Institute of Welding Machine tools — Safety — Electro-discharge machines 2013-02-14 Welding and allied processes * Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 14: Laser-arc hybrid welding of steels, nickel and nickel alloys 2013-02-14 7 ISO/FDIS 14732 * TC 61 ISO/FDIS 75-1 ISO/FDIS 75-2 Welding personnel — Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials (Revision of ISO 14732:1998) 2013-02-07 * ISO 178:2010/ FDAmd 1 * ISO 180:2000/ FDAmd 2 * ISO/FDIS 16929 * TC 69 Plastics — Determination of temperature of deflection under load — Part 1: General test method (Revision of ISO 75-1:2004) Plastics — Determination of temperature of deflection under load — Part 2: Plastics and ebonite (Revision of ISO 75-2:2004) Plastics — Determination of flexural properties — Amendment 1 Plastics — Determination of Izod impact strength — Amendment 2: Precision data Plastics — Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilotscale test (Revision of ISO 16929:2002) 2013-02-21 * ISO/FDIS 7870-2 * Statistics — Vocabulary and symbols — Part 3: Design of experiments (Revision of ISO 3534-3:1999) Control charts — Part 2: Shewhart control charts Fluid power systems * ISO/FDIS 3452-1 2013-02-21 ISO/FDIS 12219-4 TC 147 ISO/FDIS 13165-1 * 2013-02-20 ISO/FDIS 23893-3 * TC 156 * TC 172 * TC 106 ISO/FDIS 6873 Capability of detection — Part 6: Methodology for the determination of the critical value and the minimum detectable value in Poisson distributed measurements by normal approximations 2013-02-05 TC 198 ISO 134086:2005/FDAmd 1 Dentistry * 2013-02-21 (Revision of ISO 6873:1998) ISO/FDIS 1797-3 * TC 121 ISO/FDIS 81060-2 * * 8 Cigarettes — Determination of nicotine in smoke condensates — Gas-chromatographic method (Revision of ISO 10315:2000, ISO 10315:2000/Cor 1:2000) * Earth-moving machinery — Laboratory evaluations of protective structures — Specifications for deflection-limiting volume (Revision of ISO 3164:1995) * * ISO/FDIS 22197-4 * ISO/FDIS 22197-5 * 2013-02-06 2013-02-14 Water quality — Biochemical and physiological measurements on fish — Part 3: Determination of vitellogenin 2013-02-13 2013-02-15 Corrosion of metals and alloys — Guidelines for assessing the significance of stress corrosion cracks detected in service 2013-02-18 Lasers and laser-related equipment — Laser device — Minimum requirements for documentation (Revision of ISO 11252:2004) 2013-02-07 Aseptic processing of health care products — Part 6: Isolator systems — Amendment 1 2013-02-07 Intelligent transport systems — Dedicated short range communication (DSRC) — DSRC application layer (Revision of ISO 15628:2007) 2013-02-19 Fine ceramics ISO/FDIS 11894-1 2013-02-15 Earth-moving machinery Water quality — Radium 226 — Part 1: Test method using liquid scintillation counting Intelligent transport systems TC 206 Tobacco and tobacco products TC 127 ISO/FDIS 3164 Non-invasive sphygmomanometers — Part 2: Clinical investigation of automated measurement type (Revision of ISO 81060-2:2009) * 2013-02-07 Anaesthetic and respiratory equipment TC 126 ISO/FDIS 10315 Dentistry — Shanks for rotary instruments — Part 3: Shanks made of ceramics ISO/FDIS 15628 2013-02-12 Sterilization of health care products TC 204 Dentistry — Gypsum products Interior air of road vehicles — Part 4: Method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials — Small chamber method Optics and photonics * (Revision of ISO 8258:1991) ISO/FDIS 11843-6 2013-02-14 Corrosion of metals and alloys 2013-02-14 2013-02-13 Non-destructive testing — Penetrant testing — Part 1: General principles (Revision of ISO 3452-1:2008) Water quality 2013-02-21 ISO/FDIS 11252 2013-02-22 Air quality * 2013-02-21 ISO/FDIS 21601 Hydraulic fluid power — Compensated flow-control valves — Mounting surfaces (Revision of ISO 6263:1997) Non-destructive testing * TC 146 Applications of statistical methods ISO/FDIS 3534-3 ISO/FDIS 6263 TC 135 Plastics * TC 131 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for conductivity measurement of ion-conductive fine ceramics — Part 1: Oxide-ion-conducting solid electrolytes Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for air-purification performance of semiconducting photocatalytic materials — Part 4: Removal of formaldehyde Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for air-purification performance of semiconducting photocatalytic materials — Part 5: Removal of methyl mercaptan 2013-02-18 2013-02-20 2013-02-20 ISO Update, Supplement to ISO Focus -- January 2013 TC 207 ISO/FDIS 14065 Environmental management * TC 212 ISO/FDIS 19001 * * In vitro diagnostic medical devices — Information supplied by the manufacturer with in vitro diagnostic reagents for staining in biology (Revision of ISO 19001:2002) Health informatics — Syntax to represent the content of healthcare classification systems — Classification Markup Language (ClaML) Information technology — Universal Coded Character Set (UCS) — Amendment 1: Linear A, Palmyrene, Manichaean, Khojki, Khudawadi, Bassa Vah, Duployan, and other characters Systems and software engineering — Software product Quality Requirements and Evaluation (SQuaRE) — Common Industry Format (CIF) for usability: User needs report ISO/IEC FDIS 7816-4 Identification cards — Integrated circuit cards — Part 4: Organization, security and commands for interchange (Revision of ISO/IEC 78164:2005, ISO/IEC 7816-4:2005/ Amd 1:2008) ISO/IEC FDIS 29115 Information technology — Security techniques — Entity authentication assurance framework ISO/IEC 15444-9:2005/ FDAmd 5 Information technology — JPEG 2000 image coding system: Interactivity tools, APIs and protocols — Part 9: — Amendment 5: UDP transport and additional enhancements to JPIP ISO/IEC FDIS 23005-2 Information technology — Media context and control — Part 2: Control information (Revision of ISO/IEC 23005-2:2011) ISO/IEC FDIS 23005-4 ISO/IEC FDIS 19794-14 New International Standards published between 01 December and 31 December 2012 * Available in English only ** French version of standard previously published in English only Information technology — Media context and control — Part 4: Virtual world object characteristics (Revision of ISO/IEC 23005-4:2011) * * Information technology — Media context and control — Part 6: Common types and tools (Revision of ISO/IEC 23005-6:2011) Information technology — Biometric data interchange formats — Part 14: DNA data ISO Update, Supplement to ISO Focus -- January 2013 Price group 2013-02-14 2013-02-14 Information technology * ISO/IEC FDIS 25064 ISO/IEC FDIS 23005-6 2013-03-07 Health informatics JTC 1 ISO/IEC 10646:2012/ FDAmd 1 Standards published Clinical laboratory testing and in vitro diagnostic test systems TC 215 ISO/FDIS 13120 Greenhouse gases — Requirements for greenhouse gas validation and verification bodies for use in accreditation or other forms of recognition (Revision of ISO 14065:2007) COPOLCO Committee on consumer policy ISO/IEC Guide 37:2012 Instructions for use of products by consumers M TC 2 Fasteners ISO 4032:2012 Hexagon regular nuts (style 1) — Product grades A and B C Hexagon high nuts (style 2) — Product grades A and B C Hexagon regular nuts (style 1) — Product grade C C Hexagon thin nuts chamfered (style 0) — Product grades A and B C Hexagon thin nuts unchamfered (style 0) — Product grade B B ISO 4033:2012 2013-02-08 ISO 4034:2012 ISO 4035:2012 2013-02-21 ISO 4036:2012 ISO 7040:2012 2013-02-15 ISO 7042:2012 ISO 7719:2012 2013-02-21 ISO 8673:2012 2013-02-22 ISO 8674:2012 ISO 8675:2012 2013-02-21 2013-02-15 B Prevailing torque type all-metal hexagon high nuts — Property classes 5, 8, 10 and 12 B Prevailing torque type all-metal hexagon regular nuts — Property classes 5, 8 and 10 B Hexagon regular nuts (style 1) with metric fine pitch thread — Product grades A and B C Hexagon high nuts (style 2) with metric fine pitch thread — Product grades A and B C Hexagon thin nuts chamfered (style 0) with metric fine pitch thread — Product grades A and B C ISO 10511:2012 Prevailing torque type hexagon thin nuts (with non-metallic insert) ISO 10512:2012 Prevailing torque type hexagon regular nuts (with non-metallic insert) with metric fine pitch thread — Property classes 6, 8 and 10 ISO 10513:2012 Prevailing torque type all-metal hexagon high nuts with metric fine pitch thread — Property classes 8, 10 and 12 2013-02-11 TC 6 2013-02-19 Prevailing torque type hexagon regular nuts (with non-metallic insert) — Property classes 5, 8 and 10 ISO 12625-11:2012 B B B Paper, board and pulps * Tissue paper and tissue products — Part 11: Determination of wet ball burst strength E 9 TC 8 ISO/PAS 28007:2012 Ships and marine technology * Ships and marine technology — Guidelines for Private Maritime Security Companies (PMSC) providing privately contracted armed security personnel (PCASP) on board ships (and pro forma contract) M ISO 5609-3:2012 * ISO 5609-4:2012 * ISO 5609-5:2012 * ISO 5609-6:2012 * Tool holders for internal turning with cylindrical shank for indexable inserts — Part 3: Style K D Tool holders for internal turning with cylindrical shank for indexable inserts — Part 4: Style L D Tool holders for internal turning with cylindrical shank for indexable inserts — Part 5: Style U D Tool holders for internal turning with cylindrical shank for indexable inserts — Part 6: Style Q D TC 10 Technical product documentation ISO 10628-2:2012 Diagrams for the chemical and petrochemical industry — Part 2: Graphical symbols TC 17 Steel TC 33 Refractories Steels — Micrographic determination of the apparent grain size Q ISO 1927-2:2012 Monolithic (unshaped) refractory products — Part 2: Sampling for testing Hot-rolled carbon steel sheet of commercial and drawing qualities E ISO 1927-3:2012 Monolithic (unshaped) refractory products — Part 3: Characterization as received F Cold-reduced carbon steel sheet of commercial and drawing qualities E ISO 1927-4:2012 Monolithic (unshaped) refractory products — Part 4: Determination of consistency of castables D Hot-rolled steel strip of structural quality E ISO 1927-5:2012 Monolithic (unshaped) refractory products — Part 5: Preparation and treatment of test pieces J Hot-rolled carbon steel sheet as defined by chemical composition D ISO 1927-6:2012 Monolithic (unshaped) refractory products — Part 6: Measurement of physical properties F ISO 1927-7:2012 Monolithic (unshaped) refractory products — Part 7: Tests on pre-formed shapes L ISO 1927-8:2012 Monolithic (unshaped) refractory products — Part 8: Determination of complementary properties C TC 34 Food products ISO 8586:2012 Sensory analysis — General guidelines for the selection, training and monitoring of selected assessors and expert sensory assessors ISO 643:2012 ISO 3573:2012 ISO 3574:2012 ISO 6316:2012 ISO 10384:2012 * * * * TC 21 Equipment for fire protection and fire fighting ISO/TS 7240-9:2012 * ISO 6182-2:2012 * ISO 6182-3:2012 * ISO 6182-5:2012 * TC 22 ISO 16750-3:2012 Fire detection and alarm systems — Part 9: Test fires for fire detectors Fire protection — Automatic sprinkler systems — Part 2: Requirements and test methods for wet alarm valves, retard chambers and water motor alarms K Fire protection — Automatic sprinkler systems — Part 5: Requirements and test methods for deluge valves K Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 3: Mechanical loads Road vehicles — Standardized repair and maintenance information (RMI) terminology — Part 1: General information and use case definition * Road vehicles — Test procedures for evaluating out-of-position vehicle occupant interactions with deploying side air bags Tractors and machinery for agriculture and forestry ISO 24631-7:2012 Radiofrequency identification of animals — Part 7: Synchronization of ISO 11785 identification systems TC 29 Small tools ISO 5609-2:2012 10 K Fire protection — Automatic sprinkler systems — Part 3: Requirements and test methods for dry pipe valves TC 23 ISO 5609-1:2012 U Road vehicles * ISO 18542-1:2012 ISO/TR 14933:2012 U * * Tool holders for internal turning with cylindrical shank for indexable inserts — Part 1: Designation, styles, dimensions and calculation for corrections Tool holders for internal turning with cylindrical shank for indexable inserts — Part 2: Style F TC 35 Paints and varnishes ISO 20567-3:2012 Paints and varnishes — Determination of stone-chip resistance of coatings — Part 3: Single-impact test with a free-flying impact body TC 41 Pulleys and belts (including veebelts) ISO 5294:2012 Synchronous belt drives — Pulleys T F N D G M TC 44 Welding and allied processes ISO/TR 28821:2012 Gas welding equipment — Hose connections for equipment for welding, cutting and allied processes — Listing of connections which are either standardised or in common use K H L TC 45 Rubber and rubber products ISO 4650:2012 Rubber — Identification — Infrared spectrometric methods ISO 12243:2003/ Amd 1:2012 * TC 54 ISO 4719:2012 Medical gloves made from natural rubber latex — Determination of waterextractable protein using the modified Lowry method — Amendment 1 C X XZ Essential oils * Essential oil of spike lavender (Lavandula latifolia Medikus), Spanish type D D ISO Update, Supplement to ISO Focus -- January 2013 ISO 4731:2012 * TC 59 ISO 29481-2:2012 * Building information models — Information delivery manual — Part 2: Interaction framework * Wind turbines — Part 4: Design requirements for wind turbine gearboxes Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries ISO 15589-2:2012 Petroleum, petrochemical and natural gas industries — Cathodic protection of pipeline transportation systems — Part 2: Offshore pipelines ISO 10416:2008 Petroleum and natural gas industries — Drilling fluids — Laboratory testing * ISO 27509:2012 ISO 19901-3:2010 * Nuclear energy, nuclear technologies, and radiological protection Dosimetry for exposures to cosmic radiation in civilian aircraft — Part 1: Conceptual basis for measurements * Nuclear energy — Evaluation of homogeneity of Gd distribution within gadolinium fuel blends and determination of Gd2O3 content in gadolinium fuel pellets by measurements of uranium and gadolinium elements TC 87 Cork ISO 17727:2012 Cork --Cork stoppers for still wine — Sampling plan for the quality control of cork stoppers TC 92 ISO/TS 5660-3:2012 * XA XA * H S ISO 29903:2012 Guidance for comparison of toxic gas data between different physical fire models and scales M ISO/TR 16732-2:2012 Fire Safety Engineering — Fire risk assessment — Part 2: Example of an office building H TC 94 Personal safety -- Protective clothing and equipment ISO/TR 18690:2012 Guidance for the selection, use and maintenance of safety and occupational footwear and other personal protective equipment offering foot and leg protection Hand-held non-electric power tools — Safety requirements — Part 3: Drills and tappers N ISO 11148-4:2012 Hand-held non-electric power tools — Safety requirements — Part 4: Nonrotary percussive power tools N ISO 11148-6:2012 Hand-held non-electric power tools — Safety requirements — Part 6: Assembly power tools for threaded fasteners P TC 121 Anaesthetic and respiratory equipment ISO 80601-213:2011 Medical electrical equipment — Part 2-13: Particular requirements for basic safety and essential performance of an anaesthetic workstation IEC 60601-18:2006/Amd 1:2012 * ISO Update, Supplement to ISO Focus -- January 2013 Medical electrical equipment — Part 1-8: General requirements for basic safety and essential performance — Collateral standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems — Amendment 1 TC 126 Tobacco and tobacco products ISO 16055:2012 Tobacco and tobacco products — Monitor test piece — Requirements and use TC 130 Graphic technology ISO 12647-6:2012 * Graphic technology — Process control for the production of half-tone colour separations, proofs and production prints — Part 6: Flexographic printing TC 131 Fluid power systems ISO 6162-1:2012 Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 1: Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127 ISO 6162-2:2012 Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 2: Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76 TC 138 Plastics pipes, fittings and valves for the transport of fluids ISO 13268:2010 L R ISO 11148-3:2012 B Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 3: Guidance on measurement Mechanical vibration and shock — Mechanical impedance of the human hand-arm system at the driving point Compressors and pneumatic tools, machines and equipment Fire safety * T TC 118 XA N Cranes — Design principles for loads and load combinations — Part 1: General Mechanical vibration, shock and condition monitoring U X TC 85 ISO 20785-1:2012 XB Petroleum and natural gas industries — Compact flanged connections with IX seal ring Petroleum and natural gas industries — Arctic offshore structures ISO 16424:2012 ISO 10068:2012 XG ISO 19906:2010 ISO 8686-1:2012 Cranes W Petroleum, petrochemical and natural gas industries — Fired heaters for general refinery service Petroleum and natural gas industries — Specific requirements for offshore structures — Part 3: Topsides structure TC 96 TC 108 Gears TC 67 ISO 13705:2012 E Buildings and civil engineering works TC 60 IEC 61400-4:2012 Essential oil of geranium (Pelargonium x ssp.) * Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics shafts or risers for inspection chambers and manholes — Determination of ring stiffness X XZ J H L L E 11 TC 145 Graphical symbols ISO 3864-4:2011 Graphical symbols — Safety colours and safety signs — Part 4: Colorimetric and photometric properties of safety sign materials TC 146 ISO 14382:2012 * Workplace atmospheres — Determination of toluene diisocyanate vapours using 1-(2-pyridyl)piperazine-coated glass fibre filters and analysis by high performance liquid chromatography with ultraviolet and fluorescence detectors Implants for surgery ISO 25539-2:2012 Cardiovascular implants — Endovascular devices — Part 2: Vascular stents TC 156 Corrosion of metals and alloys ISO 7539-1:2012 * ISO 13174:2012 * ISO 13573:2012 * * TC 163 ISO 13788:2012 Corrosion of metals and alloys — Stress corrosion testing — Part 1: General guidance on testing procedures Cathodic protection of harbour installations Corrosion of metals and alloys — Test method for thermal-cycling exposure testing under high-temperature corrosion conditions for metallic materials Corrosion of metals and alloys — Method for metallographic examination of samples after exposure to high-temperature corrosive environments K X * Hygrothermal performance of building components and building elements — Internal surface temperature to avoid critical surface humidity and interstitial condensation — Calculation methods K ISO 11979-3:2012 Optics and optical instruments — Field procedures for testing geodetic and surveying instruments — Part 5: Total stations R N Ophthalmic optics and instruments Instruments to measure axial distances in the eye D TC 173 Assistive products for persons with disability ISO 7176-3:2012 Wheelchairs — Part 3: Determination of effectiveness of brakes * Geotechnics ISO 22476-4:2012 Geotechnical investigation and testing — Field testing — Part 4: Ménard pressuremeter test TC 193 Natural gas ISO 10723:2012 Natural gas — Performance evaluation for analytical systems ISO Guide 78:2012 Surface chemical analysis — General procedures for quantitative compositional depth profiling by glow discharge optical emission spectrometry J P L Q Intelligent transport systems * Intelligent transport systems — Eventbased probe vehicle data F Fine ceramics * Fine ceramics (advanced ceramics, advanced technical ceramics) — Test methods for fracture toughness of monolithic ceramics — Single-edge V-notch beam (SEVNB) method Geographic information/ Geomatics ISO 19117:2012 Geographic information — Portrayal J X * Geographic information — Metadata — XML schema implementation — Part 2: Extensions for imagery and gridded data TC 212 Clinical laboratory testing and in vitro diagnostic test systems ISO 16256:2012 Clinical laboratory testing and in vitro diagnostic test systems — Reference method for testing the in vitro activity of antimicrobial agents against yeast fungi involved in infectious diseases TC 213 Dimensional and geometrical product specifications and verification ISO 25178-71:2012 Geometrical product specifications (GPS) — Surface texture: Areal — Part 71: Software measurement standards E U Safety of machinery — Rules for drafting and presentation of safety standards TC 211 IEC/TR 800012-4:2012 H Surface chemical analysis * TC 206 ISO/TS 19139-2:2012 XC Safety of machinery * TC 215 N TC 182 12 G Wheelchairs — Part 11: Test dummies Wheelchairs — Part 16: Resistance to ignition of postural support devices Small craft — Electrical/electronic control systems for steering, shift and throttle ISO 23146:2012 ISO 22665:2012 ISO 7176-16:2012 ISO 25197:2012 ISO/TS 29284:2012 M * Small craft — Electrical systems — Extra-low-voltage d.c. installations TC 204 Ophthalmic optics — Contact lenses and contact lens care products — Guidance for clinical investigations ISO 7176-11:2012 ISO 10133:2012 L P * Small craft P F Industrial automation systems and integration — JT file format specification for 3D visualization TC 188 ISO 11505:2012 Ophthalmic implants — Intraocular lenses — Part 3: Mechanical properties and test methods ISO 11980:2012 * TC 201 Optics and photonics * ISO 14306:2012 Automation systems and integration TC 199 Thermal performance and energy use in the built environment TC 172 ISO 17123-5:2012 L Air quality TC 150 ISO 26146:2012 TC 184 L J F Health informatics * Application of risk management for IT-networks incorporating medical devices — Part 2-4: General implementation guidance for Healthcare Delivery Organizations TC 219 Floor coverings ISO 24342:2007/ Amd 1:2012 Resilient and textile floor-coverings — Determination of side length, edge straightness and squareness of tiles — Amendment 1 T XZ ISO Update, Supplement to ISO Focus -- January 2013 TC 223 Societal security ISO 22311:2012 Societal security — Video-surveillance — Export interoperability ISO 22313:2012 * TC 226 ISO 12926:2012 Societal security — Business continuity management systems — Guidance N T Materials for the production of primary aluminium * TC 229 Aluminium fluoride for industrial use — Determination of trace elements — Wavelength dispersive X-ray fluorescence spectrometric method using pressed powder tablets E Nanotechnologies ISO/TS 11931:2012 * ISO/TS 11937:2012 * Nanotechnologies — Nanoscale calcium carbonate in powder form — Characteristics and measurement C Nanotechnologies — Nanoscale titanium dioxide in powder form — Characteristics and measurement B ISO/TR 13329:2012 Nanomaterials — Preparation of material safety data sheet (MSDS) L ISO/TS 80004-1:2010 Nanotechnologies — Vocabulary — Part 1: Core terms B ISO/TS 80004-3:2010 Nanotechnologies — Vocabulary — Part 3: Carbon nano-objects D JTC 1 ISO/IEC 10373-6:2011/ Amd 4:2012 * ISO/IEC 11694-2:2012 * ISO/IEC 8652:2012 * ISO/IEC 14165243:2012 * ISO/IEC TR 29106:2007/ Amd 1:2012 * ISO/IEC 13888-2:2010/ Cor 1:2012 * ISO/IEC 27000:2012 * ISO/IEC 29191:2012 * ISO/IEC 21118:2012 * ISO/IEC TS 24790:2012 * ISO/IEC 23000-10:2012 * ISO/IEC 24769-5:2012 * ISO/IEC 24770:2012 * ISO/IEC 24791-5:2012 * ISO/IEC 2382-37:2012 * ISO/IEC TR 30102:2012 * Information technology ISO/IEC 88241:2008/Cor 1:2012 * ISO/IEC 88242:2008/Cor 1:2012 * ISO/IEC 88251:2008/Cor 1:2012 * ISO/IEC 88252:2008/Cor 1:2012 * ISO/IEC 88253:2008/Cor 1:2012 * ISO/IEC 88254:2008/Cor 1:2012 * ISO/IEC 88255:2008/Cor 1:2012 * ISO/IEC 24824-1:2007/ Cor 1:2012 * ISO/IEC 26551:2012 * Information technology — Abstract Syntax Notation One (ASN.1): Specification of basic notation — Part 1: — Technical Corrigendum 1 Information technology — Abstract Syntax Notation One (ASN.1): Information object specification — Part 2: — Technical Corrigendum 1 Information technology — ASN.1 encoding rules: Specification of Basic Encoding Rules (BER), Canonical Encoding Rules (CER) and Distinguished Encoding Rules (DER) — Part 1: — Technical Corrigendum 1 Information technology — ASN.1 encoding rules: Specification of Packed Encoding Rules (PER) — Part 2: — Technical Corrigendum 1 Information technology — ASN.1 encoding rules: Specification of Encoding Control Notation (ECN) — Part 3: — Technical Corrigendum 1 Information technology — ASN.1 encoding rules: XML Encoding Rules (XER) — Part 4: — Technical Corrigendum 1 Information technology — ASN.1 encoding rules: Mapping W3C XML schema definitions into ASN.1 — Part 5: — Technical Corrigendum 1 free free free free free free free Information technology — Generic applications of ASN.1: Fast infoset — Part 1: — Technical Corrigendum 1 free Software and systems engineering — Tools and methods for product line requirements engineering U ISO Update, Supplement to ISO Focus -- January 2013 Identification cards — Test methods — Part 6: Proximity cards — Amendment 4: Bit rates of fc/8, fc/4 and fc/2 and frame size from 512 to 4096 bytes Identification cards — Optical memory cards — Linear recording method — Part 2: Dimensions and location of the accessible optical area N B Information technology — Programming languages — Ada XC Information technology — Fibre Channel — Part 243: Backbone 3 (FC-BB-3) XB Information technology — Generic cabling — Introduction to the MICE environmental classification — Amendment 1 Information technology — Security techniques — Non-repudiation — Part 2: Mechanisms using symmetric techniques — Technical Corrigendum 1 Information technology — Security techniques — Information security management systems — Overview and vocabulary Information technology — Security techniques — Requirements for partially anonymous, partially unlinkable authentication. Information technology — Office equipment — Information to be included in specification sheets — Data projectors Information technology — Office equipment — Measurement of image quality attributes for hardcopy output — Monochrome text and graphic images Information technology — Multimedia application format (MPEG-A) — Part 10: Surveillance application format Information technology — Automatic identification and data capture techniques — Real time locating systems (RTLS) device conformance test methods — Part 5: Test methods for chirp spread spectrum (CSS) at 2,4 GHz air interface Information technology — Real-time locating system (RTLS) device performance test methods — Test methods for air interface communication at 2,4 GHz Information technology — Radio frequency identification (RFID) for item management — Software system infrastructure — Part 5: Device interface Information technology — Vocabulary — Part 37: Biometrics Information technology — Distributed Application Platforms and Services (DAPS) — General technical principles of Service Oriented Architecture XZ free M E G S G P E K L W 13 Standards confirmed The following International Standards are confimred for a five year period: ISO 1189:1986 (reconfirmed) ISO 12611:2004 (reconfirmed) TC 38 Textiles ISO 1139:1973 (reconfirmed) ISO 6741-2:1987 (reconfirmed) TC 44 Welding and allied processes Ships and marine technology ISO/TR 16060:2003 (reconfirmed) ISO 3652:1975 (reconfirmed) ISO/TR 17641-3:2005 ISO 3786:1975 (reconfirmed) TC 58 Gas cylinders ISO 3926:1980 (reconfirmed) ISO 22991:2004 (reconfirmed) ISO 4051:1977 (reconfirmed) TC 59 ISO 4085:1979 (reconfirmed) Buildings and civil engineering works ISO 4089:1979 (reconfirmed) ISO 4127-1:1979 (reconfirmed) ISO 4127-2:1980 (reconfirmed) TC 8 ISO 7892:1988 (reconfirmed) TC 83 Sports and recreational equipment ISO 14359:1997 (reconfirmed) ISO 14573:2002 (reconfirmed) Bases for design of structures ISO 4175:1979 (reconfirmed) ISO 6216:1980 (reconfirmed) TC 98 ISO 6764:1985 (reconfirmed) ISO 10137:2007 ISO 6765:1985 (reconfirmed) ISO 13823:2008 ISO 6766:1984 (reconfirmed) TC 105 Steel wire ropes ISO 7221:1984 (reconfirmed) ISO 2408:2004 (reconfirmed) ISO 7222:1985 (reconfirmed) ISO 4344:2004 (reconfirmed) ISO 7607:1984 (reconfirmed) ISO 17893:2004 (reconfirmed) ISO 7608:1985 (reconfirmed) TC 121 ISO 8303:1985 (reconfirmed) Anaesthetic and respiratory equipment ISO 8304:1984 (reconfirmed) ISO 8384:2000 (reconfirmed) ISO 9382:1990 (reconfirmed) ISO 7255:1985 (reconfirmed) ISO 16628:2008 TC 123 Plain bearings ISO/TR 27507:2010 ISO 7902-2:1998 (reconfirmed) ISO 7902-3:1998 (reconfirmed) ISO 12130-1:2001 (reconfirmed) ISO 12130-3:2001 (reconfirmed) ISO 12131-1:2001 (reconfirmed) ISO 12131-2:2001 (reconfirmed) ISO 12131-3:2001 (reconfirmed) ISO 12167-1:2001 (reconfirmed) ISO/TS 12854:2009 ISO 12167-2:2001 (reconfirmed) ISO/TS 13075:2009 ISO 12168-1:2001 (reconfirmed) TC 22 ISO 12168-2:2001 (reconfirmed) TC 137 Footwear sizing designations and marking systems ISO 20858:2007 ISO 28001:2007 TC 17 Steel ISO/TR 9769:1991 ISO 17058:2004 (reconfirmed) TC 21 Equipment for fire protection and fire fighting Road vehicles ISO 11012:2009 TC 23 Tractors and machinery for agriculture and forestry ISO 9407:1991 (reconfirmed) ISO 5674:2004 (reconfirmed) TC 138 TC 29 Small tools Plastics pipes, fittings and valves for the transport of fluids ISO/TS 13399-150:2008 ISO/TR 24857:2006 TC 34 Food products ISO 16820:2004 (reconfirmed) TC 35 Paints and varnishes ISO 276:2002 (reconfirmed) ISO 277:2002 (reconfirmed) ISO 4625-1:2004 (reconfirmed) ISO 4625-2:2004 (reconfirmed) ISO 11908:1996 (reconfirmed) TC 36 Cinematography 14 ISO 14531-2:2004 (reconfirmed) TC 163 Thermal performance and energy use in the built environment ISO 9229:2007 ISO 9346:2007 TC 165 Timber structures ISO 22156:2004 (reconfirmed) JTC 1 Information technology ISO/TR 9544:1988 ISO/IEC TR 9573:1988 ISO/IEC TR 9573-11:2004 ISO Update, Supplement to ISO Focus -- January 2013 January-February 2013 ISO/IEC TR 9573-13:1991 29-1 ISO/IEC TR 10037:1991 ISO/IEC TR 15413:2001 London (United Kingdom) * TC 8/SC 8 Ships and marine technology/Ship design February 2013 ISO/IEC TR 19758:2003 Standards withdrawn 4-5 Madrid (Spain) TC 265 Carbon dioxide capture, transportation, and geological storage 6 London (United Kingdom) TC 58/SC 4 Gas cylinders/Operational requirements for gas cylinders 8 St. Gallen (Switzerland) TC 94/SC 13 Personal safety -Protective clothing and equipment/Protective clothing 12-22 Berlin (Germany) TC 213 Dimensional and geometrical product specifications and verification 18-21 Pretoria (South Africa) TC 69/SC 1 Applications of statistical methods/Terminology and symbols TMB Technical Management Board 21-22 Berlin (Germany) TC 20/SC 4 Aircraft and space vehicles/Aerospace fastener systems 27 Copenhagen (Denmark) TC 104/SC 4 Freight containers/ Identification and communication 28 Montreal (Canada) TC 197 Hydrogen technologies JTC 1/SC 35 Information technology/User interfaces Period from 01 December to 31 December 2012 TC 22 Road vehicles ISO/TS 20119:2002 (replaced by ) TC 29 Small tools ISO 5609:1998 (replaced by ISO 5609-1:2012, ISO 56092:2012, ISO 5609-3:2012, ISO 5609-4:2012, ISO 5609-5:2012, ISO 5609-6:2012) 20-21 Sydney (Australia) ISO 6261:2011 (replaced by ISO 5609-1:2012) TC 34 Food products ISO 8586-1:1993 (replaced by ISO 8586:2012) ISO 8586-2:2008 (replaced by ISO 8586:2012) TC 44 Welding and allied processes ISO 3253:1998 (replaced by ISO/TR 28821:2012) TC 60 Gears ISO 81400-4:2005 (replaced by IEC 61400-4:2012) 18-22 Busan (Korea, Republic of) TC 92 Fire safety March 2013 ISO/TR 5660-3:2003 (replaced by ISO/TS 5660-3:2012) 3-8 TC 121 Anaesthetic and respiratory equipment ISO 5361-4:1987 (replaced by ISO 5361:2012) TC 184 Automation systems and integration ISO/PAS 14306:2011 (replaced by ISO 14306:2012) TC 219 Floor coverings ISO 13747:1999 (replaced by ISO 24342:2007/Amd 1:2012) JTC 1 Information technology ISO/IEC 14545:1998 (replaced by ) ISO/IEC TR 24770:2008 (replaced by ISO/IEC 24770:2012) * February-March 2013 TC 229 Nanotechnologies 11-15 Tokyo (Japan) Mexico (Mexico) * TC 210 Quality management and corresponding general aspects for medical devices 12-13 Troy (USA) TC 22/SC 11 Road vehicles/Safety glazing materials 12-14 Berlin (Germany) TC 96/SC 10 Cranes/Design principles and requirements 15 Tokyo (Japan) TC 79/SC 11 Light metals and their alloys/Titanium 15 Greenville (USA) TC 192 Gas turbines TC 107 Metallic and other inorganic coatings 19-22 Jeju (Korea, Republic of) 21-22 Miami (USA) ** TC 44/SC 8 Welding and allied processes/Equipment for gas welding, cutting and allied processes 25-29 Paris (France) * TC 161 Control and protective devices for gas and/or oil burners and appliances 27-28 Geneva (Switzerland) * COUNCIL Council * TC 85/SC 2 Nuclear energy, nuclear technologies, and radiological protection/Radiological protection Meeting calendar (update at 01 December 2012) April 2013 Meetings called for the month of January are not in this edition. 2-5 * Information definite but meeting not yet formally convened ** Provisional ISO Update, Supplement to ISO Focus -- January 2013 Vienna (Austria) 15 8-10 London (United Kingdom) TC 34/SC 16 Food products/Horizontal methods for molecular biomarker analysis 8-12 Madrid (Spain) JTC 1/SC 38 Information technology/Distributed application platforms and services (DAPS) 8-12 Sydney (Australia) PC 271 Compliance programs 9 Helsinki (Finland) 12 Paris (France) * TC 117 Fans TC 92/SC 1 Fire safety/Fire initiation and growth 15-19 Seattle (USA) * TC 204 Intelligent transport systems 15-20 Moscow (Russian Federation) * TC 92/SC 3 Fire safety/Fire threat to people and environment 15-20 Moscow (Russian Federation) ** TC 92/SC 4 Fire safety/Fire safety engineering TC 48 Laboratory equipment 16-17 Frankfurt (Germany) 17-18 St-Denis (France) * TC 17/SC 3 Steel/Steels for structural purposes 17-18 Xian (China) * TC 67/SC 2 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/ Pipeline transportation systems 21-26 Mexico (Mexico) TC 215 Health informatics 22-26 Berlin (Germany) TC 108/SC 5 Mechanical vibration, shock and condition monitoring/Condition monitoring and diagnostics of machine systems 23-24 Dresden (Germany) * TC 219 Floor coverings 25-26 New York (USA) ** TC 178 Lifts, escalators and moving walks TC 24/SC 4 Particle characterization including sieving/Particle characterization 26-27 Clausthal-Zellerfeld (Germany) 13 Guangzhou (China) TC 68/SC 2 Financial services/ Financial Services, security 13 Guangzhou (China) TC 68/SC 4 Financial services/ Securities and related financial instruments 13-14 Berlin (Germany) ** TC 34/SC 15 Food products/Coffee 13-16 Chicago (USA) ** TC 195/SC 1 Building construction machinery and equipment/Machinery and equipment for concrete work 13-17 Berlin (Germany) ** TC 29 Small tools 13-17 Berlin (Germany) ** TC 29/SC 2 Small tools/High speed steel cutting tools and their attachments 13-17 Berlin (Germany) ** TC 29/SC 9 Small tools/Tools with cutting edges made of hard cutting materials TC 68 Financial services 13-17 Guangzhou (China) 13-17 Tokyo (Japan) ** TC 114 Horology 13-17 Vienna (Austria) * TC 171 Document management applications 13-17 Vienna (Austria) * TC 171/SC 2 Document management applications/ Application issues 13-17 Chicago (USA) ** TC 195 Building construction machinery and equipment 14 Guangzhou (China) * TC 68/SC 7 Financial services/ Core banking 15 Santa María de Lamas (Portugal) * TC 87 Cork 15-16 (Japan) ** TC 22/SC 1 Road vehicles/Ignition equipment 16 ** TC 29/SC 8 Small tools/Tools for pressing and moulding * TC 249 Traditional chinese medicine 21-24 Berlin (Germany) TC 43/SC 3 Acoustics/Underwater acoustics 22 TC 67/SC 5 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/ Casing, tubing and drill pipe Berlin (Germany) 20-23 Durban (South Africa) Vancouver (Canada) 29-30 Sophia Antipolis (France) * JTC 1/SC 27 Information technology/IT Security techniques Salzburg (Austria) ** TC 89 Wood-based panels Shenzen (China) ** TC 130 Graphic technology (South Africa) ** TC 242 Energy Management 22-23 La Valetta (Malta) * COPOLCO Committee on consumer policy 22-24 Stockholm (Sweden) * TC 145 Graphical symbols 23-25 Moscow (Russian Federation) * TC 20/SC 8 Aircraft and space vehicles/Aerospace terminology 24 * TC 158 Analysis of gases 26-31 Montreal (Canada) * JTC 1/SC 7 Information technology/Software and systems engineering 27-29 Bilbao (Spain) * TC 147/SC 3 Water quality/Radioactivity measurements 27-31 Shanghai (China) * TC 4 Rolling bearings April-May 2013 29-2 Sydney (Australia) * PC 272 Forensic sciences 29-3 Sydney (Australia) * TC 110/SC 4 Industrial trucks/ Rough-terrain trucks 29-3 Calgary (Canada) TC 251 Project committee: Asset management 30-2 Calgary (Canada) TC 23/SC 19 Tractors and machinery for agriculture and forestry/Agricultural electronics May 2013 10-17 Hangzhou (China) 16 * TC 10 Technical product documentation Delft (Netherlands) ISO Update, Supplement to ISO Focus -- January 2013 28-31 Helsinki (Finland) TC 257 General technical rules for determination of energy savings in renovation projects, industrial enterprises and regions 17-21 Shanghai (China) * TC 121 Anaesthetic and respiratory equipment 17-21 Shanghai (China) ** TC 121 Anaesthetic and respiratory equipment 17-21 Berlin (Germany) ** TC 149 Cycles 18-19 Louvain-laNeuve (Belgium) * TC 17/SC 11 Steel/Steel castings 18-19 (Spain) ** TC 137 Footwear sizing designations and marking systems 19-20 London (United Kingdom) ** TC 22/SC 3 Road vehicles/Electrical and electronic equipment 24-26 Berlin (Germany) * TC 34/SC 9 Food products/ Microbiology 24-28 Montreal (Canada) * TC 35 Paints and varnishes 24-28 Gaborone (Botswana) TC 207 Environmental management 25-26 Tokyo (Japan) TC 17/SC 9 Steel/Tinplate and blackplate 30-31 Busan (Korea, Republic of) * TC 211 Geographic information/ Geomatics 31 ** TC 44/SC 6 Welding and allied processes/Resistance welding and allied mechanical joining Berlin (Germany) (France) ** TC 133 Sizing systems and designations for clothes June 2013 3-4 Berlin (Germany) ** TC 44/SC 3 Welding and allied processes/Welding consumables 3-6 Milan (Italy) * TC 22/SC 13 Road vehicles/Ergonomics applicable to road vehicles 3-7 Washington, D.C (USA) * TC 39/SC 2 Machine tools/Test conditions for metal cutting machine tools 3-7 Paris (France) * TC 46/SC 11 Information and documentation/Archives/ records management 3-7 Milwaukee (USA) ** TC 69 Applications of statistical methods 3-8 Warsaw (Poland) TC 96 Cranes 5 Berlin (Germany) ** TC 29/SC 5 Small tools/Grinding wheels and abrasives 5 Prague (Czech Republic) ** TC 115 Pumps 6 Lysaker (Norway) TC 8/SC 2 Ships and marine technology/Marine environment protection 6 Berlin (Germany) * TC 44/SC 7 Welding and allied processes/Representation and terms 6-7 Milan (Italy) * TC 22/SC 17 Road vehicles/ Visibility 9-15 * TC 37 Terminology and other language and content resources 10-14 Sydney (Australia) * REMCO Committee on reference materials 10-14 Tel Aviv (Israel) * TC 224 Service activities relating to drinking water supply systems and wastewater systems - Quality criteria of the service and performance indicators 11 Pretoria (South Africa) Chantilly (USA) Prague (Czech Republic) ** TC 17/SC 12 Steel/Continuous mill flat rolled products (France) ** TC 23/SC 6 Tractors and machinery for agriculture and forestry/Equipment for crop protection Washington, D.C (USA) ** TC 67/SC 3 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/ Drilling and completion fluids, and well cements Paris (France) ** TC 86/SC 6 Refrigeration and air-conditioning/ Testing and rating of air-conditioners and heat pumps Porto de Galinhas (Brazil) ** TC 135/SC 9 Non-destructive testing/Acoustic emission testing (Germany) ** TC 180 Solar energy ** TC 34/SC 4 Food products/Cereals and pulses San Francisco (USA) * TC 173/SC 1 Assistive products for persons with disability/Wheelchairs 15-19 Paris (France) * JTC 2 Joint Project Committee - Energy efficiency and renewable energy sources - Common terminology ** TC 261 Additive manufacturing 2nd Quarter 2013 (Canada) July 2013 3-7 Nottingham (United Kingdom) * TC 220 Cryogenic vessels 11-12 (Belgium) ** TC 17/SC 17 Steel/Steel wire rod and wire products August 2013 11-13 Gothenburg (Sweden) * TC 22 Road vehicles 21-23 (USA) ** TC 134 Fertilizers and soil conditioners 11-13 Berlin (Germany) * TC 156 Corrosion of metals and alloys 26-30 (Canada) ** JTC 1/SC 35 Information technology/User interfaces 12-13 Geneva (Switzerland) * TMB Technical Management Board September 2013 TC 91 Surface active agents * TC 172/SC 5 Optics and photonics/Microscopes and endoscopes 13-14 Barcelona (Spain) ISO Update, Supplement to ISO Focus -- January 2013 3-6 Hangzhou (China) 17 7-15 Moscow (Russian Federation) * JTC 1/SC 36 Information technology/Information technology for learning, education and training 8-9 Victoria (Canada) * TC 33 Refractories 9 London (United Kingdom) * TC 21/SC 3 Equipment for fire protection and fire fighting/Fire detection and alarm systems 9-10 Paris (France) * TC 26 Copper and copper alloys 9-13 Suzhou (China) * TC 61 Plastics 9-13 Montreal (Canada) ** TC 108/SC 4 Mechanical vibration, shock and condition monitoring/Human exposure to mechanical vibration and shock 9-14 10 11 Stockholm (Sweden) * London (United Kingdom) * London (United Kingdom) * TC 163 TC 21/SC 6 TC 21/SC 11 TC 79/SC 5 Light metals and their alloys/Magnesium and alloys of cast or wrought magnesium 12 London (United Kingdom) * TC 21/SC 2 Equipment for fire protection and fire fighting/Manually transportable fire extinguishers 15-20 Velsen (Netherlands) TC 21 Equipment for fire protection and fire fighting TC 164 Mechanical testing of metals 16-17 St. Petersburg (Russian Federation) * DEVCO Committee on developing countries matters 16-17 St. Petersburg (Russian Federation) * TMB Technical Management Board 16-20 London (United Kingdom) * TC 150 Implants for surgery 16-20 Fukuoka (Japan) * TC 190/SC 2 Soil quality/Sampling 17 * TC 254 Safety of amusement rides and amusement devices Paris (France) 17-18 Belo Horizonte (Brazil) ** TC 155 Nickel and nickel alloys 17-19 Chengdu (China) * TC 256 Pigments, dyestuffs and extenders 18-20 St. Petersburg (Russian Federation) * GA General Assembly 21 * 18 St. Petersburg (Russian Federation) COUNCIL Valves/Design, manufacture, marking and testing 25-26 Oslo (Norway) * TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries 26-27 Seoul (Korea, Republic of) ** TC 44/SC 12 Welding and allied processes/Soldering materials 26-27 Toulouse (France) * TC 264 Fireworks 27 (Canada) ** TC 153/SC 1 Valves/Design, manufacture, marking and testing Paris (France) ** TC 17/SC 16 Steel/Steels for the reinforcement and prestressing of concrete London (United Kingdom) ** TC 21/SC 5 Equipment for fire protection and fire fighting/Fixed firefighting systems using water London (United Kingdom) ** TC 21/SC 8 Equipment for fire protection and fire fighting/Gaseous media and firefighting systems using gas Paris (France) ** TC 79 Light metals and their alloys Paris (France) ** TC 79/SC 2 Light metals and their alloys/Organic and anodic oxidation coatings on aluminium Paris (France) ** TC 79/SC 4 Light metals and their alloys/Unalloyed (refined) aluminium ingots Paris (France) ** TC 79/SC 6 Light metals and their alloys/Wrought aluminium and aluminium alloys Paris (France) ** TC 79/SC 7 Light metals and their alloys/Aluminium and cast aluminium alloys Paris (France) ** TC 79/SC 9 Light metals and their alloys/Symbolization Stockholm (Sweden) ** TC 119 Powder metallurgy Atlanta (USA) ** TC 142 Cleaning equipment for air and other gases Fukuoka (Japan) ** TC 190/SC 3 Soil quality/Chemical methods and soil characteristics (Europe) ** TC 190/SC 7 Soil quality/Soil and site assessment Tokyo (Japan) ** TC 267 Facilities management Equipment for fire protection and fire fighting/Smoke and heat control systems and components * * TC 153/SC 1 Equipment for fire protection and fire fighting/Foam and powder media and firefighting systems using foam and powder Paris (France) London (United Kingdom) ** Thermal performance and energy use in the built environment 11 13 23-26 (Canada) Council October 2013 1 Stuttgart (Germany) * TC 165 Timber structures 3-4 Chantilly (USA) * TC 58/SC 2 Gas cylinders/Cylinder fittings 7 Istanbul (Turkey) * TC 38/SC 1 Textiles/Tests for coloured textiles and colorants ISO Update, Supplement to ISO Focus -- January 2013 7 Milan (Italy) ** TC 44/SC 8 Welding and allied processes/Equipment for gas welding, cutting and allied processes 7-9 Tokyo (Japan) * TC 70 Internal combustion engines 7-9 Tokyo (Japan) ** TC 70/SC 8 Internal combustion engines/Exhaust gas emission measurement 18 Berlin (Germany) * TC 22/SC 7 Road vehicles/Injection equipment and filters for use on road vehicles 21-25 (Europe) * TC 39/SC 2 Machine tools/Test conditions for metal cutting machine tools 21-25 Sao Paulo (Brazil) * TC 181 Safety of toys 21-25 Sydney (Australia) * TC 215 Health informatics 21-26 Berlin (Germany) * TC 147 Water quality 22-25 Tokyo (Japan) * TC 146/SC 1 Air quality/Stationary source emissions Sarajevo (Bosnia and Herzegovina) ** TC 34/SC 12 Food products/Sensory analysis (South Africa) ** TC 44/SC 9 Welding and allied processes/Health and safety (France) ** TC 111 Round steel link chains, chain slings, components and accessories (France) ** TC 111/SC 1 Round steel link chains, chain slings, components and accessories/Chains and chain slings 7-9 Istanbul (Turkey) ** TC 126 Tobacco and tobacco products 7-11 Istanbul (Turkey) * TC 38 Textiles 7-11 Oslo (Norway) * TC 138 Plastics pipes, fittings and valves for the transport of fluids 8 Istanbul (Turkey) * TC 38/SC 2 Textiles/Cleansing, finishing and water resistance tests 9 London (United Kingdom) * TC 8/SC 7 Ships and marine technology/Inland navigation vessels 9 Istanbul (Turkey) * TC 38/SC 23 Textiles/Fibres and yarns 10 Istanbul (Turkey) * TC 38/SC 24 Textiles/Conditioning atmospheres and physical tests for textile fabrics 11 Garching (Germany) ** TC 60 Gears Berlin (Germany) ** TC 172/SC 7 11 Garching (Germany) ** TC 60/SC 1 Gears/Nomenclature and wormgearing Optics and photonics/Ophthalmic optics and instruments Beijing (China) ** TC 184/SC 2 11 Garching (Germany) ** TC 60/SC 2 Gears/Gear capacity calculation ** CASCO Committee on conformity assessment Automation systems and integration/ Robots and robotic devices 11-13 (Europe) 14-15 Miami (USA) ** TC 44/SC 3 Welding and allied processes/Welding consumables 14-18 Paris (France) * TC 2 Fasteners 14-18 Seoul (Korea, Republic of) * TC 108 Mechanical vibration, shock and condition monitoring 16-18 Munich (Germany) * TC 58/SC 3 Gas cylinders/Cylinder design 16-18 (Korea, Republic of) ** TC 123 Plain bearings 16-18 (Korea, Republic of) ** TC 123/SC 2 Plain bearings/Materials and lubricants, their properties, characteristics, test methods and testing conditions 16-18 (Korea, Republic of) ** TC 123/SC 3 16-18 (Korea, Republic of) ** 16-18 (Korea, Republic of) ** TC 123/SC 6 Plain bearings/Terms and common items 16-18 (Korea, Republic of) ** TC 123/SC 7 Plain bearings/Special types of plain bearings 17-18 (South Africa) ** TC 123/SC 5 TC 44 ISO Update, Supplement to ISO Focus -- January 2013 Plain bearings/Dimensions, tolerances and construction details Plain bearings/ Quality analysis and assurance Welding and allied processes Boulder (USA) ** TC 202 Microbeam analysis (Japan) ** TC 206 Fine ceramics Carson City (USA) ** TC 209 Cleanrooms and associated controlled environments ** TC 45 Rubber and rubber products October-November 2013 28-1 Bali (Indonesia) November 2013 4-8 (Europe) ** TC 34/SC 17 Food products/Management systems for food safety 4-9 Perros-Guirec (France) ** JTC 1 Information technology 6-9 Washington, D.C (USA) * TC 227 Springs 7-9 Okinawa (Japan) ** TC 201 Surface chemical analysis 8 Paris (France) * TC 92/SC 1 Fire safety/Fire initiation and growth 10-15 Mexico (Mexico) * TC 113 Hydrometry 11-15 Tokyo (Japan) * TC 98 Bases for design of structures 14-15 Redlands (USA) * TC 211 Geographic information/ Geomatics 19-21 Singapore (Singapore) * TC 212 Clinical laboratory testing and in vitro diagnostic test systems 20-22 Tokyo (Japan) * TC 269 Railway applications 19 Berlin (Germany) ** TC 41 Pulleys and belts (including veebelts) ** TC 23/SC 18 Tractors and machinery for agriculture and forestry/Irrigation and drainage equipment and systems Berlin (Germany) ** TC 34/SC 11 Food products/ Animal and vegetable fats and oils (Brazil) ** TC 102 Iron ore and direct reduced iron London (United Kingdom) ** TC 10 Technical product documentation 12-16 London (United Kingdom) ** TC 68/SC 4 Financial services/ Securities and related financial instruments 15 * TC 68 Financial services 17-22 Karuizawa (Japan) ** TC 215 Health informatics 19-23 Berlin (Germany) ** TC 43 Acoustics 4th Quarter 2013 New Delhi (India) (Europe) ** TC 24/SC 4 Particle characterization including sieving/Particle characterization London (United Kingdom) ** TC 59/SC 2 Buildings and civil engineering works/ Terminology and harmonization of languages (Korea, Republic of) ** Gaithersburg (USA) ** TC 172/SC 9 Optics and photonics/Electro-optical systems (South Africa) ** TC 27 Solid mineral fuels (Unknown) ** TC 38/SC 1 Textiles/Tests for coloured textiles and colorants Bratislava (Slovakia) ** TC 44/SC 11 Welding and allied processes/Qualification requirements for welding and allied processes personnel (Norway) ** TC 106 Dentistry May 2014 9-16 19-23 Berlin (Germany) Month unknown 2013 TC 138/SC 1 Plastics pipes, fittings and valves for the transport of fluids/ Plastics pipes and fittings for soil, waste and drainage (including land drainage) London (United Kingdom) ** TC 43/SC 1 Acoustics/Noise Beijing (China) ** TC 24/SC 4 Particle characterization including sieving/Particle characterization Washington, D.C (USA) ** TC 46/SC 11 Information and documentation/Archives/ records management June 2014 1-6 (Sweden) ** TC 127 Earth-moving machinery 5-6 Berlin (Germany) ** TC 211 Geographic information/ Geomatics 10-12 Rio de Janeiro (Brazil) * GA General Assembly 13 Rio de Janeiro (Brazil) * COUNCIL Council (South Africa) ** TC 178 Lifts, escalators and moving walks Montreal (Canada) ** TC 213 Dimensional and geometrical product specifications and verification Berlin (Germany) ** TC 215 Health informatics Prague (Czech Republic) ** TC 135 Non-destructive testing ** TC 45 Rubber and rubber products ** TC 146 Air quality September 2014 (Unknown) ** TC 173/SC 2 Assistive products for persons with disability/Classification and terminology (Sweden) ** TC 205 Building environment design (Portugal) ** TC 228 Tourism and related services 5-10 November 2014 October 2014 February 2014 (South America) ** JTC 1/SC 35 Information technology/User interfaces (Sweden) ** TC 213 Dimensional and geometrical product specifications and verification 3-7 Cape Town (South Africa) 4th Quarter 2014 (South Africa) March 2014 27-28 Geneva (Switzerland) * COUNCIL Council April 2014 7-11 Bologna (Italy) * TC 110/SC 4 Industrial trucks/ Rough-terrain trucks 8-9 (Japan) ** TC 199 Safety of machinery * JTC 1/SC 27 Information technology/IT Security techniques ** TC 34/SC 2 Food products/Oleaginous seeds and fruits and oilseed meals 14-15 Hong Kong (Hong Kong, China) Berlin (Germany) 20 ISO Update, Supplement to ISO Focus -- January 2013