publications - École des Mines de Saint

Transcription

PUBLICATIONS
Stéphane DAUZERE-PERES
HABILITATION
HDR de l’Université Paris VI, Paris, June 1998.
Jury :
J. Carlier (Professeur à l’Université Technologique de Compiègne, rapporteur)
P. Chretienne (Professeur à l’Université Paris VI)
Y. Dallery (Directeur de Recherche au Laboratoire d’Informatique de Paris VI)
J.B. Lasserre (Directeur de Recherche au LAAS/CNRS)
E. Pinson (Professeur à l’Université Catholique de l’Ouest, Angers)
C. Potts (Professeur à l’Université de Southampton, Royaume-Uni, rapporteur)
L. Van Wassenhove (Professeur à l’INSEAD, Fontainebleau, rapporteur).
PHD THESIS
Planification et Ordonnancement de la Production : une Approche Intégrée Cohérente
Thèse de docteur de l’Université Paul Sabatier, Toulouse, March 1992.
Jury :
E. Balas (Professeur à l’Université Carnegie-Mellon, Pittsburgh, USA, rapporteur)
M. Courvoisier (Professeur à l’Université Paul Sabatier, Toulouse)
G. Doumeingts (Professeur à l’Université de Bordeaux et Directeur du GRAI, rapporteur)
G. Fontan (Professeur à l’I.N.P. de Toulouse)
J.B. Lasserre (Chargé de Recherche au LAAS/CNRS, Directeur de Thèse)
F. Roubellat (Directeur de Recherche au LAAS/CNRS, rapporteur)
L. Van Wassenhove (Professeur à l’INSEAD, Fontainebleau).
BOOK AND BOOK CHAPTERS
1. S. Dauzère-Pérès, J.B. Lasserre, An Integrated Approach in Production Planning and Scheduling. Lecture Notes in Economics and Mathematical Systems, Vol. 411, SpringerVerlag, 1994.
2. S. Dauzère-Pérès, J.B. Lasserre, Planification et Ordonnancement Intégrés, chapter of Concepts et Outils pour les Systèmes de Production du groupe “Systèmes de Production” du LAASCNRS, Cépaduès Editions, 1997.
3. S. Dauzère-Pérès, W. Roux, J.B. Lasserre, Ordonnancement avec Allocation de Ressources, chapter of Concepts et Outils pour les Systèmes de Production du groupe “Systèmes de
Production” du LAAS-CNRS, Cépaduès Editions, 1997.
4. S. Dauzère-Pérès, P. Castagliola, C. Lahlou, Niveau de service en ordonnancement, chapter
of Flexibilité et robustesse en ordonnancement, Hermès, 2005.
5. J.R. Montoya-Torres, S. Dauzère-Pérès, L. Vermariën, A Consistent Approach for Vehicle Planning and Control in Large Unified Automated Material Handling Systems, chapter of
Progress in Material Handling Research : 2006, R. Meller, M.K. Ogle, B.A. Peters, G.D. Taylor,
J. Usher (Editors), ISBN 1-882780-12-4, Material Handling Institute, 2006.
6. S. Dauzère-Pérès, P. Castagliola, C. Lahlou, Service Level in Scheduling, Chapter of
Flexibility and Robustness in Scheduling, ISBN 978-1-84821-054-7, Wiley, 2008.
1
7. J.E. Kiba, S. Dauzère-Pérès, C. Yugma, L. Vermariën, Improved Vehicle Management for
Large Unified AMHS in Semiconductor Manufacturing Facilities, chapter of Progress in Material
Handling Research : 2008, K. Ellis, R. Meller, M.K Ogle, B.A Peters, G.D. Taylor, J. Usher
(Editors), ISBN 978-1-882780-15-0, Material Handling Institute, 2008.
8. J.E. Kiba, S. Dauzère-Pérès, C. Yugma, G. Lamiable, Comparing Transport Policies
in a Full-Scale 300mm Wafer Manufacturing Facility, chapter of Progress in Material Handling
Research : 2010, K. Ellis, K. Gue, R. de Koster, R. Meller, B. Montreuil, M.K Ogle (Editors),
ISBN 978-1-882780-15-0, Material Handling Institute, 2010.
9. N. Absi, S. Dauzère-Pérès, S. Kedad-Sidhoum, Just-in-time planning and lotsizing. Chapter in Just-in-time systems. Series on Optimization and Its Applications (Y.A. Ros-Sols, R.Z.
Ros-Mercado, eds.), Springer, vol. 60, pp. 191-207, 2012.
INTERNATIONAL JOURNALS
1. S. Dauzère-Pérès, J.B. Lasserre, A Modified Shifting Bottleneck Procedure for Job-Shop
Scheduling. International Journal of Production Research 31, 4, pp. 923-932, 1993.
2. S. Dauzère-Pérès, J.B. Lasserre, Integration of Lotsizing and Scheduling Decisions in a
Job-Shop. European Journal of Operational Research 75, pp. 413-426, 1994.
3. S. Dauzère-Pérès, Minimizing Late Jobs in the General One Machine Scheduling Problem.
European Journal of Operational Research 81, 1, pp. 134-142, 1995.
4. S. Dauzère-Pérès, A Procedure for the One-Machine Sequencing Problem with Dependent
Jobs. European Journal of Operational Research 81, 3, pp. 579-589, 1995.
5. P.J. Zwaneveld, S. Dauzère-Pérès, S.P.M. van Hoesel, L.G. Kroon, H.E. Romeijn,
M. Salomon, H.W. Ambergen, Routing Trains Through Railway Stations: Models and
Algorithms. Transportation Science 30, 3, pp. 181-194, 1996.
6. S. Dauzère-Pérès, J.B. Lasserre, Lot Streaming in Job-Shop Scheduling. Operations Research 45, 4, pp. 584-595, 1997.
7. M. Salomon, M.M. Solomon, L.N. van Wassenhove, Y. Dumas, S. Dauzère-Pérès,
Solving The Discrete Lotsizing and Scheduling Problem with Sequence Dependent Set-up Costs
and Set-up Times Using the Travelling Salesman Problem with Time Windows. European Journal of Operational Research 100, pp. 494-513, 1997.
8. S. Dauzère-Pérès, J. Paulli, An Integrated Approach for Modeling and Solving the General
Multiprocessor Job-Shop Scheduling Problem Using Tabu Search. Annals of Operations Research
70, pp. 281-306, 1997.
9. S. Dauzère-Pérès, W. Roux, J.B. Lasserre, Multi-Resource Shop Scheduling with Resource
Flexibility. European Journal of Operational Research 107, pp. 289-305, 1998.
10. W. Roux, S. Dauzère-Pérès, J.B. Lasserre, Planning and Scheduling in a Multi-Site Environment. Production Planning and Control 10, 1, pp. 19-28, 1999.
11. S. Dauzère-Pérès, S.B. Gershwin, M. Sevaux, Models and Solving Procedures for Continuous-Time Production Planning. IIE Transactions 32, pp. 93-103, 2000.
12. S. Dauzère-Pérès, J.B. Lasserre, On the Importance of Sequencing Decisions in Production
Planning and Scheduling. International Transactions in Operational Research 9, 6, pp. 779-793,
2002.
2
13. M. Sevaux, S. Dauzère-Pérès, Genetic Algorithms to Minimize the Weighted Number of
Late Jobs on a Single Machine. European Journal of Operational Research 151, 2, pp. 296-306,
2003.
14. S. Dauzère-Pérès, M. Sevaux, Using Lagrangean Relaxation to Minimize the Weighted
Number of Late Jobs on a Single Machine. Naval Research Logistics 50, pp. 273-288, 2003.
15. S. Dauzère-Pérès, C. Pavageau, Extensions of an Integrated Approach for Multi-Resource
Shop Scheduling. IEEE Transactions on Systems, Man and Cybernetics, Part C, 33, 2, pp.
207-213, 2003.
16. S. Dauzère-Pérès, M. Sevaux, An Exact Method to Minimize the Number of Tardy Jobs in
Single Machine Scheduling. Journal of Scheduling 7, 6, pp. 405-420, 2004.
17. N. Brahimi, S. Dauzère-Pérès, N.M. Najid, A. Nordli, Single Item Lot Sizing Problems.
European Journal of Operational Research 168, pp. 1-16, 2006.
18. S. Martinez, S. Dauzère-Pérès, C. Guéret, Y. Mati, N. Sauer, Complexity of Flowshop
Scheduling Problems with a New Blocking Constraint. European Journal of Operational Research
169, pp. 855-864, 2006.
19. C. Lahlou, S. Dauzère-Pérès, Single machine scheduling with time windows dependent processing times. Journal of the Operational Research Society 57, 2, pp. 133-139, 2006.
20. N. Brahimi, S. Dauzère-Pérès, N.M. Najid, Capacitated Multi-Item Lot-Sizing Problems
with Time Windows. Operations Research 54, 5, pp. 951-967, 2006.
21. S. Dauzère-Pérès, A. Nordli, A. Olstad, K. Haugen, U. Koester, P.O. Myrstad,
G. Teisklub, A. Reistad, Omya Hustadmarmor Optimizes Its Supply Chain for Delivering
Calcium Carbonate Slurry to European Paper Manufacturers. Interfaces 37, 1, pp. 39-51, 2007.
22. I. Essafi, Y. Mati, S. Dauzère-Pérès, A Genetic Local Search Algorithm for Minimizing Total Weighted Tardiness in the Job-Shop Scheduling Problem. Computers & Operations Research
35, pp. 2599-2616, 2008.
23. S. Dauzère-Pérès, N. Sauer, Editorial: Feature cluster: Planning and Scheduling in Industrial and Logistic Systems. European Journal of Operational Research 199, 3, pp. 694-694,
2009.
24. N. Brahimi, S. Dauzère-Pérès, L.A. Wolsey, Polyhedral and Lagrangian approaches for
lot sizing with production time windows and setup times. Computers & Operations Research
37, pp. 182-188, 2010.
25. A. Sarac, N. Absi, S. Dauzère-Pérès, A Literature Review on the Impact of RFID Technologies on Supply Chain Management. International Journal of Production Economics 128, 1,
pp. 77-95, 2010.
26. S. Dauzère-Pérès, S. C. Sarin, C. Yugma, Editorial: Novel models and approaches for
semiconductor manufacturing. Production Planning and Control 22, 1, pp. 1-3, 2011.
27. C. Johnzén, S. Dauzère-Pérès, P. Vialletelle, Flexibility Measures for Qualification Management in Wafer Fabs. Production Planning and Control 22, 1, pp. 81-90, 2011.
28. J. R. Morrison, C.-F. Chien, S. Dauzère-Pérès, M. Dawande, H. Ding, J. S. Pettinato, J. YI, Guest Editorial: Equipment and Operations Automation in the Semiconductor
Industry. IEEE Transactions on Automation Science and Engineering 8, 1, pp. 1-4, 2011.
3
29. Y. Mati, C. Lahlou, S. Dauzère-Pérès, Modeling and Solving a Practical Flexible Job-Shop
Scheduling Problem with Blocking Constraints. International Journal of Production Research
49, 8, pp. 2169-2182, 2011.
30. N. Absi, S. Kedad-Sidhoum, S. Dauzère-Pérès, Uncapacitated Lot-Sizing Problem with
Production Time Windows, Early Production, Backlog and Lost Sale. International Journal of
Production Research 49, 9, pp. 2551-2566, 2011.
31. Y. Mati, S. Dauzère-Pérès, C. Lahlou, A General Approach for Optimizing Regular Criteria
in the Job-Shop Scheduling Problem. European Journal of Operational Research 212, pp. 33-42,
2011.
32. N. Jedidi, P. Sallagoity, A. Roussy, S. Dauzère-Pérès, Oxide HDP-CVD modelling for
Shallow Trench Isolation. IEEE Transactions on Semiconductor Manufacturing 24, pp. 273-279,
2011.
33. C.-F. Chien, S. Dauzère-Pérès, H. Ehm, J. W. Fowler, Z. Jiang, S. Krishnaswamy,
T.-E. Lee, L. Mönch, J. Mason, R. Uzsoy, Modeling and Analysis of Semiconductor
Manufacturing in a Shrinking World: Challenges and Successes. European Journal of Industrial
Engineering 5, 3, pp. 254-271, 2011.
34. S. Housseman, N. Absi, S. Dauzère-Pérès, D. Feillet, Impacts of Radio-Identification on
Cryo-Conservation Centers. ACM Transactions on Modeling and Computer Simulation 21, 4,
23 pages, 2011
35. L. Mönch, J. W. Fowler, S. Dauzère-Pérès, S. J. Mason, O. Rose, Scheduling Semiconductor Manufacturing operations: Problems, Solution Techniques, and Future Challenges.
Journal of Scheduling 14, 6, pp. 583-599, 2011.
36. B. Detienne, S. Dauzère-Pérès, C. Yugma, Scheduling jobs on parallel machines to minimize a regular step total cost function. Journal of Scheduling 14, 6, pp. 523-538, 2011.
37. B. Detienne, S. Dauzère-Pérès, C. Yugma, An exact approach for scheduling jobs with
regular step cost functions on a single machine. Computers & Operations Research 39, 5, pp.
1033-1043, 2012.
38. C. Yugma, S. Dauzère-Pérès, C. Artigues, A. Derreumaux, O. Sibille, A Batching and
Scheduling Algorithm for the Diffusion Area in Semiconductor Manufacturing. International
Journal of Production Research 50, 8, pp. 2118-2132, 2012.
39. F. Ramond, D. De Almeida, S. Dauzère-Pérès, H.D. Sherali, Optimized Rostering of
Workforce Subject to Cyclic Requirements. Informatica 36, pp. 327-336, 2012.
40. N. Absi, B. Detienne, S. Dauzère-Pérès, Heuristics for the multi-item capacitated lot-sizing
problem with lost sales. Computers & Operations Research 40, 1, pp. 264-272, 2013.
41. S. Dauzère-Pérès, L. Mönch, Scheduling jobs on a single batch processing machine with
incompatible job families and weighted number of tardy jobs objective. Computers & Operations
Research 40, 5, pp. 1224-1233, 2013.
42. N. Absi, S. Dauzère-Pérès, S. Kedad-Sidhoum, B. Penz, C. Rapine, Lot Sizing with
Carbon Emission Constraints. European Journal of Operational Research 227, 1, pp. 55-61,
2013.
4
43. J. Nduhura Munga, G. Rodriguez-Verjan, S. Dauzère-Pérès, C. Yugma, P. Vialletelle, J. Pinaton, A Literature Review on Sampling Techniques in Semiconductor Manufacturing. IEEE Transactions on Semiconductor Manufacturing 26, 2, pp. 188-195, 2013.
44. C. Jimenez, S. Dauzère-Pérès, C. Feuillebois, E. Pauly, Optimizing the positioning and
technological choices of RFID elements for aircraft part identification. European Journal of
Operational Research 227, 2, pp. 350-357, 2013.
45. A. Obeid, S. Dauzère-Pérès, C. Yugma, Scheduling Job Families on Non-Identical Parallel
Machines with Time Constraints. Annals of Operations Research 213, 1, pp. 221-234, 2014.
46. E. Zehendner, G. Rodriguez-Verjan, N. Absi, S. Dauzère-Pérès, D. Feillet, Optimized
allocation of straddle carriers to reduce overall delays at multimodal container terminals. To
appear in Flexible Services and Manufacturing Journal, http://dx.doi.org/10.1007/s10696-0139188-1.
47. N. Absi, C. Archetti, S. Dauzère-Pérès, D. Feillet, A two-phase iterative heuristic approach for the Production Routing Problem. To appear in Transportation Science,
http://dx.doi.org/10.1287/trsc.2014.0523.
48. A. Sarac, N. Absi, S. Dauzère-Pérès, Impacts of RFID technologies on supply chains: A
simulation study of a three-level supply chain subject to shrinkage and delivery errors. To appear
in European Journal of Industrial Engineering.
49. E. D. Gómez Urrutia, R. Aggoune, S. Dauzère-Pérès, Solving the Integrated Lot-Sizing
and Job-Shop Scheduling Problem. International Journal of Production Research 52, 17, pp.
5236-5254, 2014.
50. C. Yugma, J. Blue, S. Dauzère-Pérès, A. Obeid, Integration of Scheduling and Advanced
Process Control in Semiconductor Manufacturing: Review and Outlook. To appear in Journal
of Scheduling, http://dx.doi.org/10.1007/s10951-014-0381-1.
51. G. Rodriguez-Verjan, S. Dauzère-Pérès, J. Pinaton, Optimized Allocation of Defect
Inspection Capacity with a Dynamic Sampling Strategy. To appear in Computers & Operations
Research, http://dx.doi.org/10.1016/j.cor.2014.06.024.
52. N. Brahimi, S. Dauzère-Pérès, A Lagrangian Heuristic for Capacitated Single Item Lot
Sizing Problems. To appear in 4OR - A Quarterly Journal of Operations Research,
http://dx.doi.org/10.1007/s10288-014-0266-3.
PATENT
1. C. Jimenez, S. Dauzère-Pérès, Overall Optimization of the Configuration of a Meshed Wireless Network of RF Devices in an Aircraft / Optimisation d’ensemble de configuration d’un réseau
sans fil maillé de dispositifs radiofréquence dans un aéronef (EURO308PUSA)/(FR1000734).
INTERNATIONAL CONFERENCES (with proceedings)
1. S. Dauzère-Pérès, J.B. Lasserre, A Modified Shifting Bottleneck Procedure for Job-Shop
Scheduling. Second Inter. Workshop on Project Management and Scheduling, Compiègne,
France, June 1990.
2. S. Dauzère-Pérès, J.B. Lasserre, An Iterative Procedure for Lot Streaming in Job-Shop
Scheduling. 15th Conf. for Computers and Industrial Engineering, Cocoa Beach, USA, March
1993.
5
3. S. Dauzère-Pérès, A Procedure for the One-Machine Sequencing Problem with Dependent
Jobs. 15th Conf. for Computers and Industrial Engineering, Cocoa Beach, USA, March 1993.
4. S. Dauzère-Pérès, Extensions of an Integrated Model for Job-Shop Planning and Scheduling.
9th Inter. Conf. on Systems Engineering, Las Vegas, USA, July 1993.
5. S. Dauzère-Pérès, S.B. Gershwin, Switching Times in Continuous-Time Planning. 1994
Japan-U.S.A. Symposium on Flexible Automation, Kobe, Japon, July 1994.
6. S. Dauzère-Pérès, J.B. Lasserre, An Integrated Approach to Lot-Sizing and Scheduling.
1994 Japan-U.S.A. Symposium on Flexible Automation, Kobe, Japan, July 1994.
7. S. Dauzère-Pérès, J.B. Lasserre, Solving the Job-Shop and Flow-Shop Scheduling Problems
with Lot Streaming. Fourth Inter. Workshop on Project Management and Scheduling, Leuven,
Belgium, July 1994.
8. W. Roux, S. Dauzère-Pérès, J.B. Lasserre, J. Paulli, A tabu search technique for scheduling with resource allocation. Fifth Inter. Workshop on Project Management and Scheduling,
Poznan, Poland, April 1996.
9. S. Dauzère-Pérès, An Efficient Formulation for Minimizing the Number of Late Jobs in SingleMachine Scheduling. Sixth IEEE Inter. Conf. on Emerging Technologies and Factory Automation (ETFA’97), UCLA, Los Angeles, USA, September 1997.
10. W. Roux, S. Dauzère-Pérès, J.B. Lasserre, Comparing an Integrated and a Standard
Planning and Scheduling Model. Sixth IEEE Inter. Conf. on Emerging Technologies and
Factory Automation (ETFA’97), UCLA, Los Angeles, USA, September 1997.
11. S. Dauzère-Pérès, M. Sevaux, Handling Discrete Demand in Continuous-Time Production
Planning. 9th Symposium of the International Federation of Automatic Control on Information
Control in Manufacturing, INCOM’98, Metz-Nancy, France, June 1998.
12. S. Dauzère-Pérès, M. Sevaux, A Branch and Bound Method to Minimize the Number of
Late Jobs on a Single Machine. Sixth Inter. Workshop on Project Management and Scheduling,
Istanbul, Turkey, July 1998.
13. S. Dauzère-Pérès, M. Sevaux, Control Policies for some Continuous-Time Production Scheduling Problems. Inter. Conf. on Industrial Engineering and Production Management, IEPM’99,
Glasgow, United Kingdom, July 1999.
14. N. Brahimi, S. Dauzère-Pérès, N.M. Najid, A. Nordli, A Review of Single Item Lot
Sizing Problems. IEEE Inter. Conf. on Systems, Man and Cybernetics, IEEE SMC02, Tunis,
Tunisia, September 2002.
15. N.M. Najid, S. Dauzère-Pérès, A. Zaidat, A modified simulated annealing method for
Flexible Job Shop Scheduling Problem. IEEE Inter. Conf. on Systems, Man and Cybernetics,
IEEE SMC02, Tunis, Tunisia, September 2002.
16. S. Martinez, S. Dauzère-Pérès, C. Guéret, Y. Mati, N. Sauer, Complexity of Flowshop Scheduling Problems with a New Blocking Constraint, Multiconference on Computational
Engineering in Systems Applications 2003, CESA’03, Lille, France, July 2003.
17. V. Laredo, S. Dauzère-Pérès, Optimization of Semiconductor Wafer Deliveries, Multiconference on Computational Engineering in Systems Applications 2003, CESA’03, Lille, France, July
2003.
6
18. J.R. Montoya Torres, S. Dauzère-Pérès, H. Marian, L. Vermariën, Analysis of transport strategies for full-automated semiconductor fabrication using large-scale facility models, 6th
International Conference on Industrial Engineering, Besançon, France, June 2005.
19. J.R. Montoya Torres, S. Dauzère-Pérès, H. Marian, L. Vermariën, Vehicle positioning
in complex automated transport systems, 10th IEEE Conference on Emerging Technologies and
Factory Automation ETFA 2005, vol. 2, pp. 165-170, Catania, Italy, September 2005.
20. J.R. Montoya Torres, S. Dauzère-Pérès, L. Vermariën, A simulation-optimization approach for vehicle control in automated semiconductor manufacturing, 17th European Simulation
Symposium ESS2005, pp. 137-142, Marseille, France, October 2005.
21. C. Artigues, S. Dauzère-Pérès, A. Derreumaux, O. Sibille, C. Yugma, A batch optimization solver for diffusion area scheduling in semiconductor manufacturing, INCOM’O6 (12th
IFAC Symposium on Information Control Problems in Manufacturing), Saint-Etienne, France,
May 2006.
22. M. Boudia, S. Dauzère-Pérès, C. Prins, M.A.0. Louly, Integrated optimization of production and distribution for several products, 2006 IEEE International Conference on Service
Systems and Service Management, 6 pages, Troyes, France, October 2006.
23. M. Bureau, S. Dauzère-Pérès, Y. Mati, Scheduling challenges and approaches in semiconductor manufacturing, INCOM’O6 (12th IFAC Symposium on Information Control Problems in
Manufacturing), vol. 2 pp.739-744, Saint-Etienne, France, May 2006.
24. F. Ramond, S. Dauzère-Pérès, D. De Almeida, Scheduling moves within railcar maintenance centers, INCOM’O6 (12th IFAC Symposium on Information Control Problems in Manufacturing), Saint-Etienne, France, May 2006.
25. Wolosewicz C., S. Dauzère-Pérès, R. Aggoune, A new approach for solving integrated
planning and scheduling problem, INCOM’O6 (12th IFAC Symposium on Information Control
Problems in Manufacturing), vol. 3, pp. 191-196, Saint-Etienne, France, May 2006.
26. F. Ramond, D. De Almeida, S. Dauzère-Pérès, Enhanced operation scheduling within
railcar maintenance centers, 7th World Congress on Railway Research, Montreal, Canada, June
2006.
27. J.R.
hicle
2006
June
Montoya Torres, S. Dauzère-Pérès, L. Vermariën, A Consistent Approach for VePlanning and Control in Large Unified Automated Material Handling Systems, IMHRC
(9th International Material Handling Research Colloquium), Salt Lake City, Utah, USA,
2006.
28. N. Brahimi, S. Dauzère-Pérès, Capacitated Single Item Lot Sizing with Time Windows,
Conference on Systems and Control, Marrakech, Morocco, May 2007.
29. S. Azem, R. Aggoune, S. Dauzère-Pérès, A mathematical model for job shop scheduling
with resource availability constraints, International Conference on Industrial Engineering and
Systems Management IESM’07, Beijing, China, May-June 2007.
30. M. Bureau, S. Dauzère-Pérès, C. Yugma, L. Vermariën, A consistent approach for
simulating global and local scheduling, ASMC 2007 (18th Annual IEEE/SEMI Advanced Semiconductor Manufacturing Conference 2007), pp. 96-99, Stresa, Italy, June 2007.
31. C. Johnzen, S. Dauzère-Pérès, P. Vialletelle, C. Yugma, Importance of Qualification
Management for Wafer Fabs, ASMC 2007 (18th Annual IEEE/SEMI Advanced Semiconductor
Manufacturing Conference 2007), pp. 166-169, Stresa, Italy, June 2007.
7
32. C. Wolosewicz, S. Dauzère-Pérès, R. Aggoune, Résolution d’un problème intégré de planification et d’ordonnancement, GI2007 (7ème Congrès international de génie industriel), sur
CD, 10 pages, Trois Rivière, Quebec, Canada, June 2007.
33. C. Yugma, R. Riffart, S. Dauzère-Pérès, P. Vialletelle, F. Buttin, A dispatcher simulator for a photolithography workshop, ASMC 2007 (18th Annual IEEE/SEMI Advanced Semiconductor Manufacturing Conference 2007), pp. 100-104, Stresa, Italy, June 2007.
34. M. Bureau, S. Dauzère-Pérès, C. Yugma, L. Vermariën, An original approach for
semiconductor manufacturing, INFORMS Simulation Society Research Workshop, pp. 27-31,
Fontainebleau, France, July 2007.
35. N. Jedidi, P. Sallagoity, A. Roussy, S. Dauzère-Péres, J. Pinaton, Feed-forward Run
to Run control for reduced Parametric transistor variation in CMOS logic 0.13µm technology,
ISSM conference, Santa Clara, USA, October 2007.
36. M. Bureau, S. Dauzère-Pérès, C. Yugma, L. Vermariën, J.-B. Maria, Simulation
Results and Formalism for Global-local Scheduling in Semiconductor Manufacturing Facilities,
WSC 2007 (Winter Simulation Conference 2007), pp. 1768-1773, Washington D.C., USA, December 2007.
37. S. Azem, R. Aggoune, S. Dauzère-Pérès, Disjunctive and time-indexed formulations for
non-preemptive job shop scheduling with resource availability constraints, IEEE International
Conference on Industrial Engineering and Engineering Management, IEEM2007, Singapore,
December 2007.
38. C. Johnzen, S. Dauzère-Pérès, P. Vialletelle, Flexibility models for semiconductor fabrication, MOSIM’08 (7ème Conférence Francophone de Modélisation et Simulation), vol. 1, pp.
268-275, Paris, France, April 2008.
39. J.-E. Kiba, S. Dauzère-Pérès, C. Yugma, L. Vermariën, Gestion optimisée des véhicules
dans un large système de transport unifié pour la fabrication de semi-conducteurs, MOSIM’08
(7ème Conférence Francophone de Modélisation et Simulation), vol. 2, pp. 1159-1166, Paris,
France, April 2008.
40. A. Sarac, N. Absi, S. Dauzère-Pérès, Analyse de l’impact des technologies RFID sur le
modèle du newsvendor avec des stocks erronés : cas de distributions uniformes, MOSIM’08
(7ème Conférence Francophone de Modélisation et Simulation), vol. 1, pp. 426-435, Paris,
France, April 2008.
41. J.-E. Kiba, S. Dauzère-Pérès, C. Yugma, L. Vermariën,Improved Vehicle Management
for Large Unified AMHS in Semiconductor Manufacturing Facilities, IMHRC 2008 (10th International Material Handling Research Colloquium), Dortmund, Germany, May 2008.
42. C. Yugma, S. Dauzère-Pérès, A. Derreumaux, O. Sibille, A Batch Optimization Sofware
for diffusion area scheduling in semiconductor manufacturing, ASMC 2008 (19th Annual IEEE/SEMI
Advanced Semiconductor Manufacturing Conference 2008), pp. 327-332, Boston, USA, May
2008.
43. S. Housseman, N. Absi, D. Feillet, S. Dauzère-Pérès, L.M. Daufresne, P. Hofman,
Utilisation des NTIC dans la gestion d’un stock d’échantillons biologiques: la simulation pour
aider à la décision, GISEH’08 (Gestion et Ingénierie des SystEmes Hospitaliers), pp. 167-174,
Lausanne, Switzerland, September 2008.
8
44. S. Kedad-Sidhoum, C. Rodriguez-Getan, N. Absi, S. Dauzère-Pérès, Quality Service in
Supply Chain Production Planning, International Symposium on Operational Research, 347-357,
November 2008, Alger, Algeria.
45. S. Housseman, N. Absi, D. Feillet, S. Dauzère-Pérès, R. Collomp, P. Mallea, N.
Mirfendereski, C. Chabannon, Estimating the impact of RFID technologies in healthcare
applications: Perspectives using simulation, ICIS (International Conference on Information Systems) Ancillary meeting, 9 pages, Paris, France, December 2008.
46. C.-F. Chien, S. Dauzère-Pérès, H. Ehm, J.W. Fowler, Z. Jiang, S. Krishnaswamy,
L. Mönch, R. Uzsoy, Modeling and Analysis of Semiconductor Manufacturing in a Shrinking
World: Challenges and Successes, MASM 2008 (4th International Conference on Modeling and
Analysis of Semiconductor Manufacturing), in WSC 2008 (Winter Simulation Conference 2008),
pp. 2093-2099, Miami, USA, December 2008.
47. C. Johnzen, S. Dauzère-Pérès, A. Derreumaux, P. Vialletelle, C. Yugma, Impact of
Qualification Management on Scheduling in Semiconductor Manufacturing, MASM 2008 (4th
International Conference on Modeling and Analysis of Semiconductor Manufacturing), in WSC
2008 (Winter Simulation Conference 2008), pp. 2059-2066, Miami, USA, December 2008.
48. A. Sarac, N. Absi, S. Dauzère-Pérès, A simulation approach to evaluate the impact of
introducing RFID technologies in a three-level supply chain, WSC 2008 (Winter Simulation
Conference 2008), pp. 2741-2749, Miami, USA, December 2008.
49. S. Housseman, N. Absi, S. Dauzère-Pérès, C. Chabannon, P. Hofman, Simulation as
a decision support tool: Estimating the Impacts of using RFID technologies within Biobanks,
HealthInf (International Conference on Health Informatics), pp. 337-342, Porto, Portugal, January 2009.
50. C. Johnzen, S. Dauzère-Pérès, P. Vialletelle, C. Yugma, Optimizing Flexibility and
Equipment Utilization through Qualification Management, ASMC 2009 (20th Annual IEEE/SEMI
Advanced Semiconductor Manufacturing Conference), in cooperation with ISSM, pp. 137-140,
Berlin, Germany, May 2009.
51. B. Detienne, C. Yugma, S. Dauzère-Pérès, Scheduling Quality Tasks subject to a fixed
Production Plan, MISTA 2009, pp. 581-593, Dublin, Ireland, August 2009.
52. S. Housseman, N. Absi, D. Feillet, S. Dauzère-Pérès, Impacts of Radio-Identification
on Cryo-Conservation Centers Through Simulation, WSC 2009 (Winter Simulation Conference
2009), pp. 2065-2077, Austin (Texas), USA, December 2009.
53. J.-E. Kiba, S. Dauzère-Pérès, C. Yugma, G. Lamiable, Simulation of a Full 300mm
Semiconductor Manufacturing Plant with Material Handling Constraints, WSC 2009 (Winter
Simulation Conference 2009), pp. 1601-1609, Austin (Texas), USA, December 2009.
54. L. Mönch, J. W. Fowler, S. Dauzère-Pérès, S. J. Mason, O. Rose, Scheduling Semiconductor Manufacturing Operations: Problems, Solution Techniques, and Future Challenges,
MISTA 2009, pp. 195-201, Dublin, Ireland, August 2009.
55. S. Dauzère-Pérès, L. Mönch, Minimizing the Weighted Number of Tardy Jobs on a Single
Batch Processing Machine, 2010 IIE Industrial Engineering Research Conference (IERC), 6
pages, Cancun, Mexico, June 2010.
9
56. S. Dauzère-Pérès, J.-L. Rouveyrol, C. Yugma, P. Vialletelle, A Smart Sampling Algorithm to Minimize Risk Dynamically, ASMC 2010 (21th Annual IEEE/SEMI Advanced Semiconductor Manufacturing Conference 2010), in cooperation with ISSM, pp. 307-310, San Francisco,
USA, July 2010.
57. C. Jimenez, S. Dauzère-Pérès, C. Feuillebois, E. Pauly, Integration of RFID technologies
in Helicopter Maintenance Processes, ERF 2010 (European Rotorcraft Forum), 8 pages, Paris,
France, September 2010.
58. A. Obeid, S. Dauzère-Pérès, C. Yugma, A. Ferreira, Scheduling Job Families on NonIdentical Parallel Machines under Run-To-Run Control Constraints, 12th International Conference on Project Management and Scheduling (PMS’10), pp. 309-313, Tours, France, April
2010.
59. E. Zehendner, G. L. Rodriguez-Verjan, N. Absi, S. Dauzère-Pérès, D. Feillet, Optimizing and Simulating Loading/Discharging Resource Allocation in a Multimodal Container
Port Terminal, 1st International Conference on Logistics and Maritime Systems (LOGMS 2010),
8 pages, Busan, Korea, September 2010.
60. F. Benhizia, D. De Almeida, S. Dauzère-Pérès, Integrated Planning of Railway Transportation Resources, 4th International Seminar on Railway Operations Modelling and Analysis
(RAILROME 2011), 9 pages, Rome, Italy, February 2011.
61. J. Nduhura Munga, S. Dauzère-Pérès, P. Vialletelle, C. Yugma, Optimized Management of Excursion in Semiconductor Manufacturing, MASM 2011 (7th International Conference
on Modeling and Analysis of Semiconductor Manufacturing), included in WSC 2011 (Winter
Simulation Conference 2011), pp. 2105-2112, Phoenix, Arizona, USA, December 2011.
62. A. Obeid, S. Dauzère-Pérès, C. Yugma, Scheduling Job Families on Non-Identical Parallel
Machines time constraints, MASM 2011 (7th International Conference on Modeling and Analysis
of Semiconductor Manufacturing), included in WSC 2011 (Winter Simulation Conference 2011),
pp. 1999-2010, Phoenix, Arizona, USA, December 2011.
63. G.L. Rodriguez Verjan, S. Dauzère-Pérès, J. Pinaton, Impact of Control Plan on Tool
Risk Management: A Simulation Study in Semiconductor Manufacturing, MASM 2011 (7th
International Conference on Modeling and Analysis of Semiconductor Manufacturing), included
in WSC 2011 (Winter Simulation Conference 2011), pp. 1918-1925, Phoenix, Arizona, USA,
December 2011.
64. C. Yugma, Dauzère-Pérès, J.L. Rouveyrol, P. Vialletelle, J. Pinaton, C. Relliaud, A
Smart Sampling Scheduling and Skipping Simulator and it Evaluation on Real Data Sets, MASM
2011 (7th International Conference on Modeling and Analysis of Semiconductor Manufacturing),
included in WSC 2011 (Winter Simulation Conference 2011), pp. 1908-1917, Phoenix, Arizona,
USA, December 2011.
65. E. Zehendner, N. Absi, S. Dauzère-Pérès, D. Feillet, Solving the Resource Allocation
Problem in a Multimodal Container Terminal as a Network Flow Problem, Computational Logistics, Lecture Notes in Computer Science, 2011, Volume 6971/2011, ICCL 2011 - International
Conference on Computational Logistics, pp. 341-353, Hamburg, Germany, September 2011.
66. E.D. Gomez Urrutia, R. Aggoune, S. Dauzère-Pérès, New Integrated Approach for Solving Multi-Level Lot-Sizing and Scheduling Problems, MOSIM’12 (9me Confrence Francophone
de Modlisation et Simulation), 10 pages, Bordeaux, France, April 2012.
10
67. E.D. Gomez Urrutia, R. Aggoune, S. Dauzère-Pérès, An Integrated Approach for LotSizing and Detailed Scheduling in Job-Shops, ILS 2012 (4th International Conference on Information Systems, Logistics and Supply Chain), 9 pages, Quebec, Canada, August 2012.
68. A. Obeid, S. Dauzère-Pérès, C. Yugma, Scheduling on Parallel Machines with Time Constraints and Equipment Health Factors, CASE 2012 (8th IEEE International Conference on
Automation Science and Engineering), Seoul, Korea, August 2012.
69. G. Rodriguez-Verjan, E. Tartiere, J. Pinaton, S. Dauzère-Pérès, A. Thieullen, Dispatching of Lots to Dynamically Reduce the Wafer at Risk in Semiconductor Manufacturing,
CASE 2012 (8th IEEE International Conference on Automation Science and Engineering),
Seoul, Korea, August 2012.
70. J. Nduhura Munga, S. Dauzère-Pérès, P. Vialletelle, C. Yugma, Industrial implementation of a dynamic sampling algorithm in semiconductor manufacturing: Approach and
challenges, MASM 2012 (8th International Conference on Modeling and Analysis of Semiconductor Manufacturing), included in WSC 2012 (Winter Simulation Conference 2012), 9 pages,
Berlin, Germany, December 2012.
71. G. Rodriguez-Verjan, S. Dauzère-Pérès, J. Pinaton, A Mathematical Model for Estimating Defectivity Capacity with a Dynamic Control Strategy, MASM 2012 (8th International
Conference on Modeling and Analysis of Semiconductor Manufacturing), included in WSC 2012
(Winter Simulation Conference 2012), 9 pages, Berlin, Germany, December 2012.
72. M. Rowshannahad, S. Dauzère-Pérès, B. Cassini, Qualification Management and Its Impact on Capacity Optimization, ASMC 2013 (24th Annual IEEE/SEMI Advanced Semiconductor
Manufacturing Conference 2013), pp. 174-179, Saratoga Springs, NY, USA, May 2013.
73. F. Benhizia, S. Dauzère-Pérès, D. De Almeida, O. Guyon, A Lagrangian heuristic
for a real-life integrated planning problem of railway transportation resources, 5th International
Seminar on Railway Operations Modelling and Analysis (RAILCOPENHAGEN 2013), 13 pages,
Copenhagen, Denmark, May 2013.
74. E.D. Gomez Urrutia, R. Aggoune, S. Dauzère-Pérès, Analysis and improvements of a
solving procedure for the integration of lot-sizing and scheduling decisions, IESM 2013 (2013
International Conference on Industrial Engineering and Systems Management), 8 pages, Rabat,
Marocco, october 2013.
75. M. Rowshannahad, S. Dauzère-Pérès, Qualification Management and Its Impact on Capacity Optimization, MASM 2013 (9th International Conference on Modeling and Analysis of
Semiconductor Manufacturing), included in WSC 2013 (Winter Simulation Conference 2013),
pp. 3707-3718, Washington D.C., USA, December 2013. Winner of the Best Applied Paper.
76. G. Rodriguez-Verjan, S. Dauzère-Pérès, S. Housseman, J. Pinaton, Skipping Algorithms for Defect Inspection Using a Dynamic Control Strategy in Semiconductor Manufacturing, MASM 2013 (9th International Conference on Modeling and Analysis of Semiconductor
Manufacturing), included in WSC 2013 (Winter Simulation Conference 2013), pp. 3684-3695,
Washington D.C., USA, December 2013.
77. A. Ben Chaabane, S. Dauzère-Pérès, C. Yugma, L. Rullière, G. Lamiable, Analyzing
the Impact of Key Parameters of Vehicle Management Policies in a Unified AMHS, MASM
included in WSC 2013 (Winter Simulation Conference 2013), pp. 3818-3828, Washington D.C.,
USA, December 2013.
11
78. A. Ben Amira, G. Lepelletier, P. Vialletelle, S. Dauzère-Pérès, C. Yugma, P. Lalevée,
Modeling Complex Processability Constraints in High-Mix Semiconductor Manufacturing, MASM
included in WSC 2013 (Winter Simulation Conference 2013), pp. 3719-3730, Washington D.C.,
USA, December 2013.
NATIONAL CONFERENCES (with proceedings)
1. W. Roux, S. Dauzère-Pérès, J.B. Lasserre, J. Paulli, Modélisation Intégrée d’un problème
d’ordonnancement multi-ressources avec affectation, Journées d’Etudes Affectation et Ordonnancement du Groupe de Recherche Automatique, Tours, September 1995.
2. S. Dauzère-Pérès, M. Sevaux, Various Mathematical Programming Formulations for a General One Machine Sequencing Problem, 4ième Journée Nationale sur la Résolution Pratique des
Problèmes NP-Complets, JNPC’98, Nantes, May 1998.
3. S. Dauzère-Pérès, C. Pavageau, Différencier les durées opératoires dans une approche
intégrée pour l’ordonnancement multi-ressources, 3ième Conférence Francophone de MOdélisation et SIMulation, MOSIM’01, Troyes, April 2001.
4. N. Brahimi, S. Dauzère-Pérès, C. Guéret, Ordonnancement de tâches dans un centre
de dialyse, 1ière Conférence Francophone en Gestion et Ingénierie des Systèmes Hospitaliers,
GISEH’03, Lyon, January 2003.
5. N. Brahimi, S. Dauzère-Pérès, N.M. Najid, A. Nordli. Etat de l’art sur les problèmes
de dimensionnement des lots avec contraintes de capacité, 4ième Conférence Francophone de
MOdélisation et SIMulation, MOSIM’03, Toulouse, France, April 2003.
6. N. Brahimi, S. Dauzère-Pérès, N.M. Najid. Problème de dimensionnement de lots avec
fenêtres de temps et temps de préparation, 5ième Conférence Francophone de MOdélisation et
SIMulation, MOSIM’04, pp. 33-40, Nantes, France, September 2004.
7. I. Essafi, S. Dauzère-Pérès, C. Lahlou. Single machine customer order scheduling problem, 5ième Conférence Francophone de MOdélisation et SIMulation, MOSIM’04, pp. 181-189,
Nantes, France, September 2004.
8. S. Martinez, S. Dauzère-Pérès, C. Guéret, N. Sauer. Modèle optimal pour le Flow-Shop
hybride à deux étages avec une nouvelle contrainte de blocage, 5ième Conférence Francophone
de MOdélisation et SIMulation, MOSIM’04, pp. 191-196, Nantes, France, September 2004.
9. F. Ramond, D. De Almeida, S. Dauzère-Pérès, H. Sherali. Conception de roulements
de personnel répondant à des besoins cycliques, 5ième Conférence Francophone de MOdélisation
et SIMulation, MOSIM’04, pp. 839-846, Nantes, France, September 2004.
10. Wolosewicz C., S. Dauzère-Pérès, R. Aggoune. Modélisation et résolution d’un problème
général de planification et ordonnancement intégrés, 6ième Conférence Francophone de MOdélisation
et SIMulation, MOSIM’06, vol. 2, pp. 1562-1534, Rabat, Maroc, April 2006.
INTERNATIONAL CONFERENCES (without proceedings)
1. S. Dauzère-Pérès, J.B. Lasserre, A Decomposition Approach for Job-Shop Planning and
Scheduling Problems.
- Optimization Days 1991, Montréal, Canada, May 1991.
- 11th European Conference on Operational Research, Aix-la-Chapelle, Allemagne, July 1991.
12
2. S. Dauzère-Pérès, J.B. Lasserre, An Iterative Procedure for Lot-Streaming in Job-Shop
Scheduling. 36th ORSA/TIMS Joint National Meeting, Phoenix, USA, October 1993.
3. S. Dauzère-Pérès, S.B. Gershwin, Finding Switching Times in Continuous-Time Production
Planning. 37th ORSA/TIMS Joint National Meeting, Boston, USA, April 1994.
4. S. Dauzère-Pérès, S.B. Gershwin, Continuous-Time Production Planning. PROSEM’95,
Production Planning and Control: Models and Applications, Molde, Norway, May 1995.
5. S. Dauzère-Pérès, J.B. Lasserre, A New Mixed-Integer Formulation of the Flow-Shop Sequencing Problem. Second Workshop on Models and Algorithms for Planning and Scheduling
Problems, Wernigerode, Germany, May 1995.
6. S. Dauzère-Pérès, Some New Results on Minimizing Late Jobs in One-Machine Scheduling .
Third Workshop on Models and Algorithms for Planning and Scheduling Problems, Cambridge,
United Kingdom, April 1997.
7. W. Roux, S. Dauzère-Pérès, J.B. Lasserre, An Integrated Model for Planning and Scheduling. Production and Operations Management 97, POM97, Miami Beach, USA, April 1997.
8. S. Dauzère-Pérès, M. Sevaux, Modeling and Solving Continuous-Time Production Planning
Problems. Production and Operations Management 97, POM97, Miami Beach, USA, April 1997.
9. S. Dauzère-Pérès, M. Sevaux, Using Lagrangean Relaxation to Minmize the Weighted Number of Late Jobs in One Machine Sequencing with Release Dates. Combinatorial Optimization’98,
CO98, Bruxelles, Belgium, April 1998.
10. S. Dauzère-Pérès, M. Sevaux, On Minimizing Late Jobs in Single Machine Scheduling.
INFORMS/CORS Joint Meeting, Montreal, Canada, April 1998.
11. S. Dauzère-Pérès, W. Roux, J.B. Lasserre, Minimizing makespan in multi-resource shop
scheduling. INFORMS/CORS Joint Meeting, Montreal, Canada, April 1998.
12. S. Dauzère-Pérès, M. Sevaux, Using Lagrangean Relaxation to Minimize the (Weighted)
Number of Late Jobs. Contribution nationale à la 15th triennal conference of the Inter. Federation of the Oper. Res. Societies, IFORS’99, Beijing, China, August 1999.
13. S. Dauzère-Pérès, C. Pavageau, N. Sauer, IP for modeling and solving an industrial hybrid
flow-shop scheduling problem with blocking. 17th International Symposium on Mathematical
Programming, ISMP’2000, Atlanta, USA, August 2000.
14. S. Dauzère-Pérès, C. Lahlou, Single machine scheduling with time window dependent processing times. Combinatorial Optimization 2002, CO’02, Paris, France, April 2002.
15. A. Nordli, S. Dauzère-Pérès, N.M. Najid, Uncapacitated Lot-Sizing with Time Windows.
INFORMS Conference, San Jose, USA, November 2002.
16. N. Brahimi, S. Dauzère-Pérès, N.M. Najid, A Lagrangian relaxation heuristic for the
Capacited Single Item Lot Sizing Problem with Time Windows Sixth Workshop on Models and
Algorithms for Planning and Scheduling Problems, MAPSP’03, Aussois, France, April 2003.
17. I. Essafi, S. Dauzère-Pérès, C. Lahlou, Single machine customer order scheduling to minimize total weighted late orders. Combinatorial Optimization 2004, CO’04, Lancaster, United
Kingdom, March 2004.
13
18. N. Brahimi, S. Dauzère-Pérès, N.M. Najid, Capacitated Lot Sizing with Time Windows
and Setup Times 20th European Conference on Operational Research, Rhodes, Greece, July
2004.
19. A. Nordli, N. Brahimi, S. Dauzère-Pérès, N.M. Najid, Lot-sizing problems with time
windows TraLog - Transportation and Logistics, Molde, Norway, August 2004.
20. I. Essafi, S. Dauzère-Pérès, C. Lahlou, Two local search approaches for minimizing total weighted tardiness in a job shop with customer orders, Seventh Workshop on Models and
Algorithms for Planning and Scheduling Problems (MAPSP2005), Sienne, Italy, June 2005.
21. Wolosewicz C., S. Dauzère-Pérès, R. Aggoune, Study of an integrated model for production planning and scheduling in the supply chain, Seventh Workshop on Models and Algorithms
for Planning and Scheduling Problems (MAPSP2005), Sienne, Italy, June 2005.
22. S. Dauzère-Pérès, A. Nordli, U. Koester, G. Teisklub, Omya Hustadmarmor: Optimizing the Supply Chain of Calcium Carbonate Slurry to the European Paper Making Industry,
présentation à la 2006 Franz Edelman Award Competition, 2006 INFORMS Confererence on
OR/MS Practice, Miami, Florida, USA, May 2006.
23. Johnzén C., S. Dauzère-Pérès, C. Yugma, P. Vialletelle, Importance of Qualification
Management for Wafer Fabs, Third ISMI Symposium on Manufacturing Effectiveness, poster,
Austin, Texas, USA, October 2006.
24. S. Azem, R. Aggoune, S. Dauzère-Pérès, A general model for job shop scheduling with
limited machine availability, 21st Annual Conference of the Belgian Operational Research Society
ORBEL21, Luxembourg, Luxembourg, January 2007.
25. N. Absi, S. Dauzère-Pérès, S. Kedad-Sidhoum, Lot-sizing Problems with Time Windows
and Shortages, . IFORS 2008 (18th Triennial Conference of the International Federation of
Operational Research Societies), Sandton, South Africa, July 2008.
26. N. Absi, B. Detienne, S. Dauzère-Pérès, Heuristics for the multi-item capacitated lot-sizing
with lost sales, EURO Conference 2009, Bonn, Germany, July 2009.
27. N. Absi, S. Dauzère-Pérès, S. Kedad-Sidhoum, B. Penz, C. Rapine, Lot-sizing with
carbon emission constraints, International Workshop on Lot Sizing IWLS 2010, pp. 46-48,
August 2010, Gardanne, France.
28. N. Brahimi, N. Absi, S. Dauzère-Pérès, S. Kedad-Sidhoum, A two-level lot-sizing problem with bounded inventory, International Workshop on Lot Sizing IWLS 2010, pp. 13-14,
August 2010, Gardanne, France.
29. A. Obeid, S. Dauzère-Pérès, C. Yugma, A. Ferreira, Simulated Annealing for Scheduling
Job Families on Non-Identical Parallel Machines with Information Constraints, EU/ME 2010,
Lorient, France, June 2010.
30. N. Absi, S. Dauzère-Pérès, S. Kedad-Sidhoum, B. Penz, C. Rapine, Solving green
lot-sizing problems, International Workshop on Lot Sizing IWLS 2011, August 2011, Istanbul,
Turkey.
31. E.D. Gomez Urrutia, R. Aggoune, S. Dauzère-Pérès, Improvements of an Integrated
Approach for Lot Sizing and Detailed Scheduling, International Workshop on Lot Sizing IWLS
2011, August 2011, Istanbul, Turkey.
14
32. N. Absi, S. Dauzère-Pérès, S. Kedad-Sidhoum, B. Penz, C. Rapine, The Single-Item
Green Lot-Sizing Problem with Fixed Carbon Emissions, International Workshop on Lot Sizing
IWLS 2012, August 2012, Rotterdam, The Netherlands.
33. N. Absi, C. Archetti, S. Dauzère-Pérès, D. Feillet, An iterative two-phase heuristic
approach for the Production Routing Problem, International Workshop on Lot Sizing IWLS
2012, August 2012, Rotterdam, The Netherlands.
34. E.D. Gomez Urrutia, R. Aggoune, S. Dauzère-Pérès, Improvements of an Integrated
Approach for Lot Sizing and Detailed Scheduling, International Workshop on Lot Sizing IWLS
2012, August 2012, Rotterdam, The Netherlands.
NATIONAL CONFERENCES (without proceedings)
1. S. Dauzère-Pérès, Formulations en PLNE du problème général d’ordonnancement à une machine. Rencontres sur les problèmes linéaires en nombres entiers, INRIA-Rocquencourt, France,
October 1996.
2. S. Dauzère-Pérès, M. Sevaux, Un algorithme génétique pour minimiser le nombre pondéré
de jobs en retard sur une machine. 3ième congrès de la société Française de Recherche Opérationnelle et d’Aide à la Décision, ROADEF’2000, Nantes, France, January 2000.
3. S. Dauzère-Pérès, C. Pavageau, N. Sauer, Modélisation et résolution d’un problème
réel d’ordonnancement avec contraintes de blocage. 3ième congrès de la société Française de
Recherche Opérationnelle et d’Aide à la Décision, ROADEF’2000, Nantes, France, January 2000.
4. S. Dauzère-Pérès, C. Pavageau, N. Sauer, Mathematical programming for modeling and
solving a practical hybrid flow-shop scheduling problem with blocking. Ecole d’été Ordonnancement Déterministe pour l’Informatique et la Production, ODIP’2000, Aussois, France, September
2000.
5. S. Dauzère-Pérès, C. Guéret, M. Galvis, A Column Generation Approach for a Two-Stage
Hybrid Flow-shop Problem. 4ième congrès de la société Française de Recherche Opérationnelle
et d’Aide à la Décision, ROADEF’2002, Paris, France, February 2002.
6. S. Dauzère-Pérès, C. Guéret, S. Martinez, Y. Mati, N. Sauer, Complexité de problèmes
d’ordonnancement de type flow-shop avec de nouvelles contraintes de blocage. 5ième congrès
de la société Française de Recherche Opérationnelle et d’Aide à la Décision, ROADEF’2003,
Avignon, France, February 2003.
7. V. Laredo, S. Dauzère-Pérès, Optimisation des livraisons de Semi-conducteurs. 5ième congrès de la société Française de Recherche Opérationnelle et d’Aide à la Décision, ROADEF’2003,
Avignon, France, February 2003.
8. F. Ramond, D. De Almeida, S. Dauzère-Pérès, Planification des manoeuvres sur les
chantiers de maintenance des trains, 6ième congrès de la société Française de Recherche Opérationnelle
et d’Aide à la Décision, ROADEF’2005, Tours, February 2005.
9. C. Wolosewicz, S. Dauzère-Pérès, R. Aggoune, Etude d’un modèle intégré de planification
et ordonnancement de la chane logistique, 6ième congrès de la société Française de Recherche
Opérationnelle et d’Aide à la Décision, ROADEF’2005, Tours, February 2005.
10. C. Wolosewicz, S. Dauzère-Pérès, R. Aggoune, Modélisation et résolution du problème
d’intégration de planification et ordonnancement, 7ième congrès de la société Française de
Recherche Opérationnelle et d’Aide à la Décision, ROADEF’2006, Lille, February 2006.
15
11. C. Johnzen, S. Dauzère-Pérès, P. Vialletelle, Flexibility Measures for Machine Qualification Management, 8ième congrès de la société Française de Recherche Opérationnelle et d’Aide
à la Décision, ROADEF’2007 / FRANCORO V, Grenoble, February 2007.
12. N. Jedidi, A. Roussy, P. Sallagoity, S. Dauzère-Pérès, J. Pinaton, Interprocess Run-toRun Controller for reduced Parametric Transistor Variation in CMOS Logic 0.13µm Technology,
The 10th Technical and Scientific Meeting of ARCSIS ”Yield and reliability: Challenges and
Process Improvements”, STUniversity, Fuveau, December 2007.
13. N. Absi, S. Dauzère-Pérès, S. Kedad-Sidhoum, Problème de lot-sizing à capacité finie
avec fentres de temps et ruptures sur les demandes, 9ième congrès de la société Française de
Recherche Opérationnelle et d’Aide à la Décision, ROADEF’2008, Clermont-Ferrand, February
2008.
14. C. Yugma, S. Dauzère-Pérès, A. Derreumaux, T. Philippi, C. Quarta, Ordonnancement de lots dans une zone de photolithographie pour la fabrication de semi-conducteurs,
9ième congrès de la société Française de Recherche Opérationnelle et d’Aide à la Décision,
ROADEF’2008, Clermont-Ferrand, February 2008.
15. B. Detienne, C. Yugma, A. Ferreira, S. Dauzère-Pérès, Integration of Scheduling decisions and Advanced Process Control in Semiconductor Manufacturing, The 11th Technical and
Scientific Meeting of ARCSIS ”Wafer Manufacturing Process Control: methods, applications
and new challenges”, Poster, STUniversity, Fuveau, November 2008.
16. B. Detienne, C. Yugma, S. Dauzère-Pérès, Minimisation du retard des mesures dans la fabrication des semi-conducteurs, 10ième congrès de la société Française de Recherche Opérationnelle
et d’Aide à la Décision, ROADEF’2008, Nancy, February 2009.
17. S. Kedad-Sidhoum, C. Rodriguez-Getan, N. Absi, S. Dauzère-Pérès, Problème de
lot-sizing à capacité finie avec fentres de temps et contraintes de services, 10ième congrès de la
société Française de Recherche Opérationnelle et d’Aide à la Décision, ROADEF’2008, Nancy,
February 2009.
16

publications - École des Mines de Saint

Transcription

Documents pareils

XYNYTH MANUFACTURING CORP

2013.04, Stage_assistant_realisateur

Junior Engineer / Technician Technicien/ingénieur industriel

Septembre-Octobre 2009

Fiche OI MANUFACTURING FRANCE - Portail des ECO

full program - Nicolas Carayol

REGISTRATION FORM FORMULAIRE D`INSCRIPTION

« ASSOCIATION L`ITALIE A TOULOUSE »

Dan Dana ONOMASTICON THRACICUM Répertoire des noms

Your ticket to Berlin! Volunteer interpreters for the 14th European