tlkefhd-45 - VRF Europe bv
Transcription
tlkefhd-45 - VRF Europe bv
DÉCLARATION DES PERFORMANCES Nr. 1.431 1. Code d’identification unique du produit type: TLKEFHD-45 2. Numéro de type, de lot ou de série ou tout autre élément permettant l’identification du produit de construction, conformément à l’article 11, paragraphe 4 : TLKEFHD-45 Numéro de lot: Voir emballage 3. Usage ou usages prévus du produit de construction, conformément à la spécification technique harmonisée applicable, comme prévu par le fabricant Systèmes de fixation pour systèmes d’étanchéité toiture à fixation mécanique + TLKEFHD-45 4. Nom, raison sociale ou marque déposée et adresse de contact du fabricant, conformément à l’article 11, paragraphe 5: VRF Europe BV Jan Tooropstraat 16 NL-5753 DK Deurne 5. Le cas échéant, nom et adresse de contact du mandataire dont le mandat couvre les tâches visées à l’article 12, paragraphe 2: N/A 6. Le ou les systèmes d’évaluation et de vérification de la constance des performances du produit de construction, conformément à l’annexe V: Système 2 + 7. Dans le cas de la déclaration des performances concernant un produit de construction couvert par une norme harmonisée: N/A 8. Dans le cas de la déclaration des performances concernant un produit de construction pour lequel une évaluation technique européenne a été délivrée: SGS INTRON 0958 a délivrer ETA-06/0007, sur la base de ETAG 006 selon le système FPC 0958-CPD-MF-001/4. 9. Performances déclares: Caractéristiques essentielles Prestation Résistance caractéristique Type de montage Restrictions Annexe 3 Annexe 3 Annexe 3 Spécification technique harmonisée ETA-06/0007 ETA-06/0007 ETA-06/0007 10. Les performances du produit identifié aux points 1 et 2 sont conformes aux performances déclarées indiquées au point 9. La présente déclaration des performances est établie sous la seule responsabilité du fabricant identifié au point 4. Signé pour le fabricant et en son nom par: J. van der Graaf, CEO Deurne, 01-03-2016 1.431 Beton/Concrete Beton/Béton Eurofast TLKEFHD-45 Code TLKEFHD-45-060 TLKEFHD-45-080 TLKEFHD-45-090 TLKEFHD-45-110 TLKEFHD-45-130 TLKEFHD-45-150 TLKEFHD-45-160 TLKEFHD-45-170 TLKEFHD-45-190 TLKEFHD-45-210 TLKEFHD-45-230 TLKEFHD-45-250 TLKEFHD-45-270 TLKEFHD-45-300 TLKEFHD-45-330 TLKEFHD-45-360 TLKEFHD-45-400 TLKEFHD-45-430 TLKEFHD-45-470 TLKEFHD-45-520 TLKEFHD-45-570 Ø tube Ø45 Ø45 Ø45 Ø45 Ø45 Ø45 Ø45 Ø45 Ø45 Ø45 Ø45 Ø45 Ø45 Ø45 Ø45 Ø45 Ø45 Ø45 Ø45 Ø45 Ø45 L tube 35 35 65 65 105 105 135 105 165 165 185 225 225 255 255 285 320 320 320 320 320 Ø screw 6,3 6,3 6,3 6,3 6,3 6,3 6,3 6,3 6,3 6,3 6,3 6,3 6,3 6,3 6,3 6,3 6,3 6,3 6,3 6,3 6,3 L screw 80 100 80 100 80 100 80 130 80 100 100 80 100 100 130 130 130 160 200 250 300 L3 55 - 64 65 - 84 85 - 94 95 - 114 115 - 134 135 - 154 155 - 164 165 - 174 175 - 194 195 - 214 215 - 234 235 - 254 255 - 174 275 - 304 305 - 334 335 - 364 365 - 404 405 - 434 435 - 474 475 - 524 525 - 574 250 250 250 250 250 250 250 250 250 250 250 125 125 125 125 125 125 125 125 125 125 Levertijd op aanvraag Delivery-time on request Liefertermin auf Anfrage Délais sur demande Technische gegevens Te verwerken in Bestaande uit Benodigde lengte Voorgemonteerde telescoop drukverdeelplaat (FM-Approval), voorzien van EUROFASTmerkteken Trompetkop met Torx25 bitopname en Ricoh-punt Coating: Magni-Silver Drukverdeelplaat: Polypropyleen / Schroef: 15-cycli van de Kesternich test volgens DIN 50018 S2,0L Staal / Hout / Beton / Kanaalplaat Schroef EFHD en kunststof telescoop drukverdeelplaat TLK-45. Voorgemonteerd. Beton: Opbouwdikte = L3 Technical details Application Consisting of Required length Pre-assembled combination (FM-Approval) with EUROFAST-headmark Torx25 head, Ricoh-Point Coating: Magni-Silver Telescopic deckingplate: Polypropylene / Screw: 15-cycles of the Kesternich test acc. DIN 50018 S2,0L Steel deck / Wood / Concrete / Concrete hollow core slab Screw EFHD and telescopic deckingplate TLK-45. Pre-assembled. Concrete: Build up = L3 Technische Daten Zu verarbeiten in Bestehend aus Benötigte Länge Vormontierter Kunststoff Halteteller (FM-Approval) mit EUROFAST-Markierung Torx25 Anschluss und Ricoh-Bohrspitze Beschichtung: Magni-Silver Halteteller: Polypropyleen / Schraube: 15 Zyklen Kesternich Test nach DIN 50018 S2,0L Stahl / Holz / Beton / Hohlkammerdiele Schrauben EFHD und Kunststoff Halteteller TLK-45 Vormontiert. Beton: Aufbaudicke = L3 Fiche technique Application Composé de Longueur à utilisé Plaquette télescopique pré-monté (FM-Approval), marqué EUROFAST Empreinte Torx25, a pointe Ricoh Revêtement: Magni-Silver Plaquettes: Polypropylene / Vis: 15-cycles Kesternich suivant DIN 50018 S2,0L Bac acier / Bois / Béton / Dalles Alvéolées Vis EFHD et plaquettes TLK-45. Pré-monté. Béton: Épaisseur à serrer = L3 Beton: Voorboren met Ø 5-5,5 mm (afhankelijk kwaliteit beton) Minimaal 10 mm meer dan inbrengdiepte (Pull-out test aanvragen) (Pull-out test recommend) Concrete: Predrilling with Ø 5-5,5 mm (depending on concrete density) Minimum of 10 mm more than insertiondept Beton: Vorbohren mit Ø 5-5,5 mm (abhängig von BetonHärte) Mindestens 10 mm mehr als Eindring-tiefe Béton: Préperçage Ø 5-5,5 mm (Selon qualité du béton) Min. 10 mm profondeur d’ancrage (Pull-out test Empfehlen) (Test d’arrachement sur demande) www.vrf.eu | T +31(0)493 315885 | F +31(0)493 310721 | [email protected] 042016 Member of SGS INTRON SGS INTRON SGS INTRON Certificatie B.V. Venusstraat 2 Postbus 267 4100 AG CULEMBORG T: +31 345 58 07 33 F: +31 345 58 02 08 Website: www.sgs.com/intron European Technical Assessment www.eota.eu ETA-06/0007 of 01/08/2016 General Part Technical Assessment Body issuing the ETA: SGS INTRON CERTIFICATIE B.V. Trade name of the construction product EUROFAST® Product family to which the construction product belongs Fasteners for mechanically fastened flexible roof waterproofing systems Manufacturer VAN ROIJ FASTENERS EUROPE B.V. Jan Tooropstraat 16 NL-5753 DK DEURNE Manufacturing plant(s) Laid down in non-published supplement to this ETA This European Technical Assessment contains 392 pages including 4 Annexes which form an integral part of this assessment. This European Technical Assessment is issued in accordance with regulation (EU) No 305/2011, on the basis of ETAG No. 006 Guideline for European technical approval of systems of mechanically fastened flexible roof waterproofing membranes, edition March 2000, amended November 2012, used as European Assessment Document (EAD) This ETA replaces ETA-06/0007, issued on 01/03/2016 ETA-06/0007 of 01/08/2016 – page 1 of 392