Rosetta : successful rendez

Transcription

Rosetta : successful rendez-vous with comet 67P/CG !
Extrait du Observatoire de Paris centre de recherche et enseignement en astronomie et
astrophysique relevant du Ministère de l'Enseignement supérieur et de la Recherche.
https://www.obspm.fr/rosetta-successful-rendez.html
Rosetta : successful
rendez-vous with comet
67P/CG !
Date de mise en ligne : lundi 25 août 2014
Observatoire de Paris centre de recherche et enseignement en astronomie et
astrophysique relevant du Ministère de l'Enseignement supérieur et de la
Recherche.
Copyright © Observatoire de Paris centre de recherche et enseignement en astronomie et astrophysique relevant du Ministère de l'Enseignement
Page 1/8 supérieur
After wandering for over a decade throough the solar system, the ESA space probe Rosetta
arrived on the 6th of August 2014 in the neighborhood of its ultimate target, comet 67/P
Churyumov-Gerasimenko, approaching to a distance of about 100 km. This rendez-vous
which is exceptional in more ways than one, is a European space success, to which have
contribute teams of scientists from the Paris Observatory, and which have been involved with
the mission right from the start.
La comète 67P/Churyumov-Gerasimenko vue par la caméra OSIRIS-NAC (OSIRIS narrow-angle camera) le 3
août à une distance de 285 km. La résolution est de 5.3 mètres/pixel. © ESA/Rosetta/MPS for OSIRIS Team
MPS/UPD/LAM/IAA/SSO/INTA/UPM/DASP/IDA
On the 6th of August 2014, after a number of extremely accurate manoeuvres, Rosetta and its small lander Philae
has joined up with comet 67P/Churyumov-Gerasimenko at a point in the solar system which is 405 million km from
the Earth and 540 million km from the Sun, between the orbits of Mars and Jupiter. Together, they are now heading
for the Sun at a speed of 55 000 km/hour !
Strictly speaking, the probe is not in orbit around 67/P but is following the comet in its heliocentric orbit, while
executing parts of hyperbolic orbits so as to map the nucleus and better understand its gravitational field.
This is the first time in the history of the exploration of the solar system that an interplanetary probe will follow a
comet for many months and study how its activity changes as it approaches the Sun, as well as landing on its
surface.
The first pictures sent by the OSIRIS instrument have shown that the shape of the nucleus is rather more complex
than was foreseen, and that as early as June, when the probe was still at a distance of about 30000 km. The nucleus
Page 2/8 supérieur
seems to be « binary », i.e. made up of two blocks linked by a bridge of matter.
The high resolution images acquired by Osiris during just the last few days are incredibly full of detail ; researchers
now have new kinds of terrain to study, as well as the puzzle of the shape of the nucleus : in effect, the matter bridge
seems to be much brighter than the two parts of the nucleus : this suggests the presence of a significant quantity of
ice which could sublimate each time that the comet comes close to the Sun. Thus, the narrowing of the central part of
the nucleus could be just a process of gradual erosion.
Image prise à 130 kilomètres de distance par la caméra OSIRIS-NAC (OSIRIS Narrow-angle camera) le 6 août
2014. Elle montre une zone peu accidentée du noyau de la comète. On y distingue clairement des blocs, des
cratères et des falaises abruptes. © ESA/Rosetta/MPS for OSIRIS Team
Page 3/8 supérieur
L'image prise à 130 kilomètres de distance par la caméra OSIRIS-NAC (OSIRIS Narrow-angle camera), le 6
août 2014. Elle montre en avant-plan le plus petit des 2 lobes, la tête de la comète projetant son ombre sur la
partie centrale, le cou, et le plus gros lobe, le corps. © ESA/Rosetta/MPS for OSIRIS Team
The Rosetta mission involves over 300 European scientists, including many French teams. Overall, 80 Franch
scientists took part in the development of the instruments for the pobe and for the lander ; they will now analyse the
data being acquired.
The instrumental contribution of the Paris observatory
Scientific teams at the Paris Observatory have participated in the design and realizaton of three of the eleven
instruments on the orbiter.
MIRO (Microwave Instrument for the Rosetta Orbiter)
This spectrometer was designed not only to measure the sub-surface temperature of the cometary nucleus, but also
to find its composition through a study of the volatile ejecta, and also to unerstand the mecanisms responsible for its
activity (the process of sublimation and the creation of the gas and dust in the coma).
It provides very high resolution spectral data in the millimetre and submillimetre wavelength range, and studies the
spectral signature of a number of important gaseous components : water vapour, carbon monoxide, ammonia,
Page 4/8 supérieur
methanol. The purpose of MIRO is to determine the abundances of each of these components in order to understand
the nature of the cometary nucleus, the degassing process, and where it occurs on the cometary surface.
The engineers (A. Deschamps, M. Gheudin, J.-M. Krieg) of the Laboratoire d'études du rayonnement et de la matière
en astrophysique et atmosphères (laboratory for the study of radiation and astrophysical matter) - LERMA (Paris
Observatory / CNRS / Univ. Cergy-Pontoise / UPMC / ENS) and Laboratoire d'études spatiales et d'instrumentation
en astrophysique (laboratory for space studies and astrophysical instrumentation) - LESIA (Paris Observatory /
CNRS / UPMC / Univ. Paris-Diderot) helped to furnish this instrument together with the Jet Propulsion Laboratory in
California and the Lindau Max-Planck Institute in Germany.
VIRTIS (Visible and Infrared Thermal Imaging Spectrometer)
This near infrared spectro-imager consists of a low resolution spectro-imager channel VIRTIS-M and a high spectral
resolution channel VIRTIS-H. The development of the VIRTIS instrument was led by the Rome Istituto di Astrofisica e
Planetologia Spaziali (IAPS/INAF), in collaboration with the German space agency DLR, and the Laboratoire
d'Etudes Spatiales et d'Instrumentation en Astrophysique - LESIA of the Observatoire de Paris. The high resolution
channel VIRTIS-H was completely designed, built and tested at the LESIA (X. Bonnin, M. Bouyé, O. Dupuis, A. Fave,
Y. Ghomchi, Y. Hello, F. Henry, G. Huntzinger, S. Jacquinod, D. Kouach, J. Parisot, A. Piacentino, J.-M. Reess, A.
Sémery, D. Stephanovitch)
VIRTIS en calibration sol. L'instrument est entouré de ses protections thermiques. On distingue à gauche le
baffle de la voie H, à droite celui de la voie M VIRTIS team
Tête optique de VIRTIS-H après câblage LESIA/Observatoire de Paris
Its main scientific objectives are to measure thesurface temperature of the cometary nucleus, to determine the
chemical composition of this surface and to estimate the superficial distribution of the various compounds, to assess
the various volatiles (CO2, etc) in the coma, and to get a better understanding of the process of gas and dust
Page 5/8 supérieur
ejection.
OSIRIS
The OSIRIS NAC (Narrow-angle camera) and the WAC (Wide Angle Camera) will acquire images of the surface and
also the coma of comet Churyumov-Gerasimenko in the visible domain using various filters.
The Laboratoire d'études spatiales et d'instrumentation en astrophysique (laboratory for space instrumentation and
astrophysics) - LESIA of the Paris Observatory has taken part in the design of the OSIRIS-NAC (OSIRIS
narrow-angle camera) instrument, under the scientific leadership of theMarseille Laboratoire d'Astrophysique ,
together with the LATMOS (CNRS/UPMC/UVSQ). The very high resolution images are already being downloaded
daily to Earth, and are revealing an incredible richness of detail and geological diversity, which scientists are
beginning to study.
The scientific analysis of the data
The instruments are now fully operational ; ; scientists at the Paris Observatory are ready to start analysing the data.
Réunion de travail autour de l'exploitation des données de VIRTIS LESIA/Observatoire de Paris
Rosetta has now started to make a complete mapping of the nucleus, using its various instruments, and in particular
the OSIRIS camera, the infrared spectro-imager VIRTIS and the radiometer MIRO.
From its orbit, with an altitude varying from 100 to 30 km, OSIRIS will acquire not only detailed images of sthe
surface, but also of the coma and the jets which emerge from the surface. VIRTIS willl map the nucleus at various
wavelengths (from 0,25 to 5 microns) in order to obtain not only the chemical composition, but also the temperature
Page 6/8 supérieur
of the nucleus. MIRO itself will measure the temperature below the surface at various depths, as well as the speed of
ejection of water molecusles in the coma.
LESIA scientists (D. Bockelée-Morvan, N. Biver, C. Leyrat, E. Lellouch, T. Encrenaz, J. Crovisier, W. Yvart) as well
as those from the LERMA (G. Beaudin) participate in the analysis and in the interpretation of the MIRO data. Their
work has helped in the estimation the rate at which the comet produces water which, to date, corresponds to the
equivalent of three glasses of water per second.
Their work has also helped to elucidate the chemical composition of the superficial ometary material, the internal
structure and composition of the nucleus, the dynamics and the kinds of dust being emitted, the surface degassing,
magnetism , etc.
Furthermore, they have the entire scientific responsibility for the VIRTIS-H instrument, i.e. for the high resolution
channel of VIRTIS. They are deeply involved in the preparation of observations using the VIRTIS spectro-imager, as
well as the corresponding scientific interpretation (S. Erard, D. Bockelée-Morvan, C. Leyrat, P. Drossart, A. Barucci,
M. Combes, J. Crovisier, D. Tiphène, N. Biver, V. Debout, D. Despan, S. Fornasier, F. Merlin).
Moreover, the LESIA engineers (F. Henry, S. Jacquinod, J.-M. Reess) manage the telecommands and the high
resolution operations, calibrate the data in physical units, and calculate the orbital data required for the physical
interpretation.
Vue d'artiste de l'atterrissage de Philae sur la comète. ESA
During the next few months, the shape, the dynamics, the gravitational field of the nucleus will be analyzed in detail,
as well as the composition of the ejecta of the nucleus.
From September on, the probe will approach the nucleus gradually, from an almost circular orbit close to the
terminaor, in order to reduce the pressure of gases acting on the solar panels, whose total surface exceeds 64 m2.
Page 7/8 supérieur
5 possible landing sites for the « Philae » lander will be chosen, based in part on their scientific interest, through the
analysis of the data by the co-Is (the co-investigators) of the instruments, but especially on technical criteria furnished
by the European Space Agency's ESOC « flight Dynamics » in Darmstadt, together with the SONC (Science
Operations Center) in Toulouse.
These sites will have to be compatible with specific constraints : accessibility from Rosetta's orbit, low surface
activity, relatively smooth surface, at least 6 hours of light per day so that Philae can rechage its batteries, etc).
2 sites will then be selected in the second phase. A few weeks before the landing, programmed for November 11
2014, the probe will inject itself into an elliptical 5x10 km orbit if cometary activity is weak, or into a slightly larger orbit
if this activity is considered too risky for the probe. The site where Philae will finally land will be chosen at this stage.
While the safety of the probe and the engineering criteria are uppermost at this stage of the selection process, the
scientists' opinionswill however have considerable weight. For example, data furnished by VIRTIS will lead not only
to a map of the surface composition, but will also enable one to identify zones where the surface is porous or not.
Each team will thus furnish information helping to identify scientifically interesting zones.
Landing will take place on November 11th, and Philae will be released from an altitude which depends on the
cometary activity, onto a billistic trajectory which can no longer be changed Once on the surface, its batteries will
allow it to function for two to three days.
Once this has been done, the energy source will be switched to a second set of batteries running off the solar panels,
so that the various experiments can work for several months.
The orbiter itself will continue to study the nucleus and its environment as the comet approaches the Sun (closest
passage in August 2015), until at least December 2015 . The adventure is just starting !
Page 8/8 supérieur

Rosetta : successful rendez

Transcription

Documents pareils

ROSETTA - First images of the comet 67 P

Earthquake of Sumatra : did the axis of the Earth tremble ?

The meter : a republican measurement

Training courses proposed by the Observatory

Painting with oxygen and hydrogen

First mapping of the area surrounding our solar system

Careers in research - Observatoire de Paris

Reception for the FsU - Observatoire de Paris

Useful links - Observatoire de Paris

GRAVITY probing the physics of black holes