apache - Xigmatek
Transcription
apache - Xigmatek
A P A C H E CD901 / 903 INTEL INS TALLATION ( LGA 775 / 1155 / 1156 ) INSTALLATION GUIDE Accessories STEP 1 Tear the package off the thermal grease, apply thermal grease evenly to the bottom of the heatsink. CPU Thermal Grease STEP 2 Use the INTEL PUSH-PINS to fix the “INTEL LGA775/1155/1156 Bracket” on the motherboard. A. LGA775: 1 LGA775/1155/1156 2 PUSH-PIN Female x 4 3 PUSH-PIN Male x 4 B. LGA1155/1156: 4 Thermal grease X 1 Bracket x 1 A M D IN STA L L A T I ON ( K8 / AM2 / AM3 / FM1 ) STEP 1 Tear the package off the thermal grease, apply thermal grease evenly to the bottom of the heatsink. CPU Thermal Grease STEP 2 Remove the blister and sticker from the bottom of cooler;Position the mounting clip to either side of the Retention Module. STEP 3 Press the other side of mounting clip until it is securely fastened. Connect the power connector. STEP 3 Remove the blister and sticker from the bottom of coolerΙPosition the mounting clip to either side of the Retention Module. STEP 4 Press the other side of mounting clip until it is securely fastened. Connect the power connector. WARING Keep and store product away from children. Check the component list and condition of the product before installation. If there is any problem, contact the shop where you purchased the product to get a replacement or refund. Xigmatek Co., Ltd. is not responsible for any incidental damage, including but not limited to, improper use, and problems with electrical power, accident, neglect, alteration, repair, improper installation, and improper testing. Incorrect installation may damage the cooler, CPU, and motherboard. http://www.xigmatek.com E-mail: [email protected] • [email protected] 2012 © XIGMATEK Co., Ltd. All rights reserved. All trademarks are the property of their respective owners.