40061-185-01(E), 256K, 1M, 2M, 4M, 10M PCMCIA Memory Cards
Transcription
40061-185-01(E), 256K, 1M, 2M, 4M, 10M PCMCIA Memory Cards
Installation Instructions 256K, 1M, 2M, 4M, 10M PCMCIA Memory Cards Catalog No. 2711-NM11, -NM12, -NM13, -NM14, -NM15 English ................................................................................................. Page 1 Cartes Mémoires PCMCIA 256K, 1M, 2M, 4M, 10M Références 2711-NM11, -NM12, -NM13, -NM14, -NM15 Français ............................................................................................... Page 3 256K, 1M, 2M, 4M und 10M PCMCIA Speicherkarten Katalognr. 2711-NM11, -NM12, -NM13, -NM14 Deutsch................................................................................................ Seite 5 Tarjetas de memoria PCMCIA 256K, 1M, 2M, 4M, 10M Números de catálogo 2711-NM11, -NM12, -NM13, -NM14, -NM15 Español .............................................................................................Página 7 Schede di memoria PCMCIA da 256K, 1M, 2M, 4M, e 10M N. Catalogo 2711-NM11, -NM12, -NM13, -NM14, -NM15 Italiano .............................................................................................. Pagina 9 Installation Instructions 256K, 1M, 2M, 4M and 10M PCMCIA Memory Cards (Cat. No. 2711-NM11, -NM12, -NM13, -NM14, -NM15) Description The PCMCIA Memory Cards are a storage medium for PanelView Standard or PanelView 1000e/1400e applications. Five cards are available: • • • • • 256K (Catalog No. 2711-NM11) 1M (Catalog No. 2711-NM12) 2M (Catalog No. 2711-NM13) 4M (Catalog No. 2711-NM14) 10M (Catalog No. 2711-NM15) Note: Series B and earlier PanelView 550 terminals (Keypad or Keypad & Touch versions) only support the 256K PCMCIA cards. Series C and later and all PanelView 550 Touch Only versions support the larger capacity cards. These cards slide into the card slot of a PanelView terminal, an external card drive, or a card drive on a personal computer. These instructions show how to insert the card in a PanelView terminal. ! ! ATTENTION: The memory card should be kept free from moisture, extreme temperatures, direct sunlight. Failure to observe this caution could result in damage to the card. ATTENTION: Do not subject memory to flexing or extreme shock. Failure to observe this caution could result in damage to the card. 40061-185-01(E) 2 256K, 1M, 2M, 4M and 10M PCMCIA Memory Cards Installing the Memory Card To install the memory card in the PanelView terminal: 1. Locate the card slot on the back of the PanelView terminal. The location of the card slot depends upon the terminal type. PanelView 550 PanelView 1400e PCMCIA Card Slot 2. PanelView terminals use both vertical and horizontal card slots. • For vertical card slots, position the card so that the key slot is facing the right side of the terminal. • For horizontal card slots, the key slot should be on top, left side. Connector Sockets Key Slot Key Slot Connector Sockets Horizontal Card Slot Vertical Card Slot 3. Insert the card into the card slot and push until the card is firmly seated. ! 40061-185-01(E) ATTENTION: Do not force the card into slot. Forcing the card into the slot may damage the connector pins. Notice d’installation Cartes mémoire PCMCIA 256K, 1M, 2M, 4M, 10M (Références 2711-NM11, -NM12, -NM13, -NM14, -NM15) Description Les Cartes mémoires PCMCIA permettent de stocker les applications PanelView standard ou PV 1000e/1400e. Il existe cinq cartes: • • • 256K (référence 2711-NM11) 1M (référence 2711-NM12) 2M (référence 2711-NM13) • 4M (référence 2711-NM14) • 10M (référence 2711-NM15) Remarque : Les terminaux PanelView 550 de série B ou antérieure (Touches et Touches/Tactiles) ne supportent que les cartes PCMCIA, 256K. Les terminaux PanelView 550 de série C ou ultérieure et tous les terminaux PanelView à écran tactile supportent les cartes de plus grande capacité. Ces cartes utilisent le logement d’un terminal PanelView, d’un lecteur de carte externe ou d’un lecteur de carte de PC. Ces instructions expliquent comment insérer la carte dans le terminal PanelView. ! ATTENTION : La carte mémoire ne doit pas être exposée à l’humidité, à des températures extrêmes, ou à lumière directe du soleil. Le non-respect de cette mise en garde risquerait d’endommager la carte. ! ATTENTION : Ne pas faire subir de flexion ou de choc violent à la carte mémoire. Le non-respect de cette mise en garde risquerait d’endommager la carte. 40061-185-01(E) 4 Cartes mémoire PCMCIA 256K, 1M, 2M, 4M, 10M Installation de la carte mémoire Pour installer la carte mémoire dans un terminal PanelView : 1. Localiser le logement de carte au dos du terminal PanelView. L’endroit où se trouve le logement de carte dépend du type de terminal.. PanelView 550 PanelView 1400e Logement de carte PCMCIA 2. Les terminaux PanelView peuvent avoir des logements de carte verticaux ou horizontaux. • Pour les logements de carte verticaux, positionner la carte de façon que l’encoche de positionnement soit face au côté droit du terminal. • Pour les logements de carte horizontaux, l’encoche de positionnement doit être au-dessus, à gauche. Prises de connecteurs Enchoche de positionnement Encoche de positionnement Logement de carte horizontal Prises de connecteurs Logement de carte vertical 3. Insérer la carte dans le logement et la pousser jusqu’à ce qu’elle soit bien en place. ! 40061-185-01(E) ATTENTION : Ne pas forcer la carte dans le logement. Cela pourrait endommager les broches des connecteurs. Installationsanweisungen 256K, 1M, 2M, 4M, und 10M PCMCIA Speicherkarten (Katalog-Nr. 2711-NM11, -NM12, -NM13, -NM14, -NM15) Beschreibung Die PCMCIA-Speicherkarten sind ein Speichermedium für Standard-PanelView oder PanelView 1000e/1400eAnwendungen. Es stehen fünf Karten zur Verfügung: • 256K (Katalog-Nr. 2711-NM11) • 1M (Katalog-Nr. 2711-NM12) • 2M (Katalog-Nr. 2711-NM13) • 4M (Katalog-Nr. 2711-NM14) • 10M (Katalog-Nr. 2711-NM15) Hinweis: Serie B und vorherige PanelView 550 Terminals (Tastatur oder Tastatur & Touch Versionen) unterstützen nur die 256K PCMCIA-Karten. Serie C und nachfolgende und alle PanelView 550 Nur Touch-Versionen unterstützen die Karten mit größerer Kapazität. Diese Karten werden in den Kartensteckplatz eines PanelView Terminals, eines externen Kartenlaufwerks oder in das Kartenlaufwerk eines PC eingeschoben. Diese Anweisungen zeigen, wie eine Karte in ein PanelView Terminal einzufügen ist. ! ACHTUNG: Die Speicherkarte solte nicht der Feuchtigkeit, extremen Temperaturen oder direcktem Sonnenlicht ausgesetzt werden. Eine Nichtbeachtung der Warnung könnte zum Schaden der Karte führen. ! ACHTUNG: Setzen Sie die Speicherkarte nicht Beanspruchungen, wie Beigen oder extremen Stößen, aus. Eine Nichtbeachtung der Warnung könnte zum Schaden der Karte führen. 40061-185-01(E) 6 256K, 1M, 2M, 4M, und 10M PCMCIA Speicherkarten Installieren der Speicherkarte Um die Speicherkarte in einem PanelView Terminal zu installieren: 1. Der Kartensteckplatz befindet sich auf der Rückseite des PanelView Terminals und der Ort des Steckplatzes hängt vom Terminaltyp ab. Schauen Sie sich die folgenden Beispiele des PanelView 550 und 1400 Terminals an. PanelView 550 PanelView 1400e PCMCIA Kartenstechplatz 2. PanelView Terminals benutzen entweder vertikale oder horizontale Kartensteckplätze. • Bei vertikalen Kartensteckplätzen muß die Karte mit dem Schlüssel-schlitz nach-rechts zeigend zum Terminal positioniert werden. • Bei horizontalen Kartensteckplätzen muß sich der Schlüsselschlitz an der oberen, linken Seite befinden. Verbindungssockel Schlüsselschlitz Schlüsselschlitz Verbindungssockel Horizontaler Kartensteckplatz Vertikaler Kartensteckplatz 3. Fügen Sie die Karte in den Kartensteckplatz ein und drücken Sie, bis die Karte stabil eingesetzt ist. ! 40061-185-01(E) ACHTUNG: Zwingen Sie die Karte nicht in den Steckplatz. Das Einfügen der Karte in den Steckplatz mit Gewalt, kann die Verbindungsstifte beschädigen. Instrucciones de instalación Tarjetas de memoria PCMCIA 256K, 1M, 2M, 4M, y 10M (Números de catálogo 2711-NM11, -NM12, -NM13, -NM14, -NM15) Descripción Las tarjetas de memoria PCMCIA son un medio de almacenamiento para aplicaciones de PanelBuilder. Las cuatro tarjetas disponibles son: • • • • • 256K (Número de catálogo 2711-NM11) 1M (Número de catálogo 2711-NM12) 2M (Número de catálogo 2711-NM13) 4M (Número de catálogo 2711-NM14) 10M (Número de catálogo 2711-NM15) Estas tarjetas se deslizan en la ranura de tarjeta del terminal PanelView, en la unidad externa de tarjeta o en la unidad de tarjeta de una computadora personal. Estas instrucciones muestran cómo insertar una tarjeta en un terminal PanelView. ! ATENCION: Proteja la tarjeta de memoria contra la humedad, temperaturas altas, luz directa. El no cumplir con estos requisitos puede resultar en daños a la tarjeta. ! ATENCION: No exponga la tarjeta de memoria a doblajes o a choques extremos. El no cumplir con estos requisitos puede resultar en daños a la tarjeta. 40061-185-01(E) 8 Tarjetas de memoria PCMCIA 256K, 1M, 2M, 4M, y 10M Cómo instalar la tarjeta de memoria Para instalar la tarjeta de memoria en el terminal PanelView: 1. Ubique la ranura para tarjeta en la parte posterior del terminal PanelView. La ubicación de la ranura depende del tipo de terminal. PanelView 550 PanelView 1400e Ranura para tarjeta PCMCIA 2. Los terminales PanelView usan ranuras horizontales y verticales. • En las ranuras verticales, ponga la tarjeta de manera que la ranura enchavetada quede mirando hacia el lado derecho del terminal. • En las ranuras horizontales, ponga la tarjeta de manera que la ranura enchavetada quede en la parte superior izquierda. Hembra del enchufe Ranura enchave Hembra del enchufe Ranura enchavetada Ranura horizontal Ranura vertical 3. Inserte la tarjeta en la ranura de tarjetas y empújela hasta que quede puesta firmemente. ! 40061-185-01(E) ATENCION: No fuerze la tarjeta en la ranura. El forzar la tarjeta puede dañar los pines de conexión. Istruzioni per l’installazione Schede di memoria PCMCIA da 256K, 1M, 2M, 4M, e 10M (N. di catalogo 2711-NM11, -NM12, -NM13, -NM14, -NM15) Descrizione Le schede di memoria PCMCIA sono utilizzate per memorizzare le applicazioni PanelView Standard o PanelView 1000e/1400e. Sono disponibili cinque schede: • • • • • 256K (N. di catalogo 2711-NM11) 1M (N. di catalogo 2711-NM12) 2M (N. di catalogo 2711-NM13) 4M (N. di catalogo 2711-NM14) 10M (N. di catalogo 2711-NM15) Nota: I terminali PanelView 550 di Serie B e precedenti (versioni a Tastiera e a Tastiera e Tattile) supportano solo le schede 256K PCMCIA. Quelli di Serie C e successivi e tutte le versioni Panelview 550 a Solo Tattile supportano schede con capacità più grande. Queste schede vengono inserite nel posto scheda di un terminale PanelView, in un’unità scheda esterna o in un’unità scheda di un PC. Queste istruzioni mostrano come inserire la scheda in un terminale PanelView. ! ! ATTENZIONE Mantenere la scheda di memoria in aree prive di umidità, e non esporre a temperature estreme e alla luce diretta del sole. Procedimenti contrari a queste indicazioni possono danneggiare la scheda. ATTENZIONE Non piegare la scheda o sottoporla ad urti violenti. Procedimenti contrari a queste indicazioni possono danneggiare la scheda. 40061-185-01(E) 10 Schede di memoria PCMCIA da 256K, 1M, 2M, 4M, e 10M Installazione della scheda di memoria Per installare la scheda di memoria nel terminale PanelView: 1. Trovare il posto scheda sul retro del terminale PanelView. La locazione del posto scheda dipende dal tipo di terminale. PanelView 550 PanelView 1400e Posto scheda PCMCIA 2. I terminali PanelView utilizzano posti schede verticali ed orizzontali. • Per posti schede verticali, posizionare la scheda in modo che la guida di inserimento sia di fronte al lato destro del terminale. • Per posti schede orizzontali, la guida di inserimento deve essere posizionata sopra, sul lato sinistro. Prese del connettore Guida di inserimento Guida di inserimento Prese del connettore Posto scheda orizzontale Posto scheda verticale 3. Inserire la scheda nell’apposita sede e spingerla per posizionarla adeguatamente. ! ATTENZIONE Non forzare la scheda nella sede perchè si potrebbero danneggiare i piedini del connettore. 40061-185-01(E) Schede di memoria PCMCIA da 256K, 1M, 2M, 4M, e 10M 11 40061-185-01(E) PN 40061-185-01(E) © (2000) Rockwell International Corporation. Printed in the U.S.A.