Matériaux hétérogènes

BAI prod
Liste des Publications
I. Sur les matériaux hétérogènes et la rupture
A. Revues internationales à comité de lecture
1988
A.1 J.B. BAI and S.Y. CHEN : "Secondary cracking during surface crack growth under tensile fatigue
loading" Eng. Fracture Mech Vol. 30, No.2, 1988, pp. 161-168.
1991
A.2 J.B. BAI, C. PRIOUL, S. LANSIRT and D. FRANÇOIS : "Brittle fracture induced by hydrides in
Zircaloy-4", Scripta Metall., Vol. 25, No. 11, 1991, pp. 2559-2563.
A.3 J.B. BAI, C. PRIOUL and D. FRANÇOIS : "Effect of microstructure factors and cold-work on the hydride
precipitation in Zircaloy-4", J. of Advanced Science, Vol. 3, No. 4, 1991, pp. 188-200.
1992
A.4 J.B. BAI, J. NI, D. GILBON and J.L. LEBRUN : "Microstructural study by XRD profile analysis and
TEM observations on hydrided recrystallized Zircaloy-4", Scripta Metall., Vol. 26, 1992, pp. 369-374.
A.5 J.B. BAI and D. FRANÇOIS : "Some evidence of a brittle ductile transition of zirconium hydride between
20°C and 350°C", J. Nucl. Mater, Vol. 187, 1992, pp. 186-189.
1993
A.6 J.B. BAI: "Influence of an oxide layer on the hydride embrittlement in Zircaloy-4", Scripta Metall., Vol.
29, No. 9, 1993, pp. 617-622.
A.7 J.B. BAI : "Comment on 'The ductile-brittle transition of a zirconium alloy due to hydrogen' by J.H.
Huang, S.P. Huang and C.S. Ho", Scripta Metall., Vol. 29, 1993, pp. 1259-1260.
A.8 J.B. BAI : "Equivalence in microstructural evolution between hydriding and plastic deformation in
recrystallized Zircaloy-4", J. Mater Sci. Letters, Vol. 12, 1993, pp. 677-680.
1994
A.9 J.B. BAI, C. PRIOUL and D. FRANÇOIS : "Hydride embrittlement in Zircaloy-4 plate, I. Influence of the
microstructure on the hydride embrittlement in Zircaloy-4 at 20 and 350°C", Metall. Trans., Vol. 25A,
1994, June, pp. 1185-1197.
A.10 J.B. BAI, J. NI, D. GILBON, C. PRIOUL and D. FRANÇOIS: "Hydride embrittlement in Zircaloy-4
plate, II. Interaction between the tensile stress and the hydride morphology", ibid., pp. 1199-1208.
1996
A.11 J.B. BAI : "Effect of hydriding temperature and strain rate on the ductile-brittle transition in β treated
Zircaloy-4", J. of Nuclear Science and Technology, Vol. 33, no. 2, 1996, pp. 141-146.
A.12 S. ARSENE, J.B. BAI: "A new approach to measuring transverse properties of structural tubing by a ring
test", Int. J. of Testing and Evaluation, no. 11, 1996, pp. 386-391.
1997
A.13 J.B. BAI, Ph. SEELEUTHNER and Ph. BOMPARD: "Mechanical behaviour of ± 55° filament-wound
glass-fibre/epoxy-resin tubes: Part I - Microstructure analyses and mechanical behaviour and damage
mechanisms of composite tubes under pure tensile, pure internal pressure and combined loading",
Composites Science and Technology, Vol. 57, 1997, pp. 141-153.
A.14 J.B. BAI, G.K. HU and Ph. BOMPARD: "Mechanical behaviour of ± 55° filament-wound glassfibre/epoxy-resin tubes: Part II - Micromechanical modelling of the damage initiation - competition
between different mechanisms", ibid, pp. 155-164.
A.15 A. BEN DHIA, J.B. BAI and D. FRANÇOIS: "3D finite element analyses of a novel fracture toughness
testing method for tubing structure", Int. J. of Pressure vessels and piping, Vol. 71, 1997, pp. 189-195.
A.16 K. DEMYANUSHKO and J.B. BAI: "Local and global stress state analyses of a ± 55° filament winding
tube with damage effect", Composite Structure, Vol. 37, 1997, pp. 233-240.
1998
A.17 G.K. HU, J.B. BAI, K. DEMYANUSHKO and Ph. BOMPARD: "Mechanical behaviour of ± 55°
filament-wound glass-fibre/epoxy-resin tubes: Part III - Macromechanical modelling of the macroscopical
behaviour of the tubing structure with damage effect and failure envelope prediction", Composites Science
and Technology, Vol. 58, 1998, pp. 19-29.
A.18 S. ARSENE, J.B. BAI: "A new approach to measuring transverse properties of structural tubing by a ring
test - experimental investigation", Int. J. of Testing and Evaluation, Vol. 26, No. 1, 1998, pp. 26-30.
1999
A.19 K.S. ZHANG, J.B. BAI, D. FRANÇOIS: "Ductile fracture of materials with high void volume fraction",
Int. J. of Solids and Structures, Vol. 36, No. 23, 1999, pp. 3407-3425.
A.20 G.F. QUAN, Y.J. SONG, M.J. TU and J.B. BAI: "Study on fracture strain of discontinuously reinforced
metal matrix composites", Int. J. of Fracture, Vol. 98, No. 2, 1999, pp. 103-110.
2001
A.21 K.S. ZHANG, J.B. BAI, D. FRANÇOIS: "Numerical analysis of the influence of the Lode parameter on
void growth", Int. J. of Solids and Structures, Vol. 38/32-33, 2001, pp 5847-5856.
2003
A.22 S. ARSENE, J.B. BAI and Ph. BOMPARD : "Hydride Embrittlement and Irradiation Effect on the Hoop
Mechanical Properties of PWR and BWR ZIRCALOYs Cladding Tubes: I. Hydride embrittlement in
Stress-relieved Annealed and Recrystallized ZIRCALOYs at 20 and 300°C", Metall. & Meter. Trans.,
Vol. 34A, No. 3, 2003, pp. 553-566.
A.23 M. VELEVA, S. ARSENE, M-Ch. RECORD, J-L. BECHADE, and J.B. BAI: "Hydride Embrittlement
and Irradiation Effects on the Hoop Mechanical Properties of PWR and BWR ZIRCALOY Cladding
Tubes: II. Morphology of Hydrides Investigated at Different Magnifications and their Interaction with the
Processes of Plastic Deformation", ibid., pp. 567-578.
A.24 S. ARSENE, J.B. BAI and Ph. BOMPARD : "Hydride Embrittlement and Irradiation Effect on the Hoop
Mechanical Properties of PWR and BWR Zircaloys Cladding Tubes: III. Mechanical behavior of the
hydride in Stress-relieved Annealed and Recrystallized Zircaloys at 20 and 300°C", ibid., pp. 579-601.
B-Publications dans des revues nationales à comité de lecture :
(B.1) J.B. BAI, C. PRIOUL, F. BARCELO et PELCHAT : "Comportement mécanique du Zircaloy-4 chargé en
hydrogène", << Le Zirconium >>, les éditions de physique, 1993, pp. 293-296.
(B.2) J.B. BAI, J.L. XIE et C.V. RODRIGUES : "Modélisation analytique du procédé de cofilage I - cas du
câble monoconducteur sans enroulement", Matériaux et Techniques, No. 10-11, 1994, pp. 25-32.
(B.3) J.B. BAI, J.L. XIE et C.V. RODRIGUES : "Modélisation analytique du procédé de cofilage II - cas du
câble monoconducteur avec enroulement", Matériaux et Techniques, No. 12, 1994, pp. 13-16.
(B.4) G.L. HUANG, G.K. HU and J.B. BAI: "Free surface relaxation for a particulate reinforced composites",
Acta Materiae Compositae Sinica, Vol. 15, 1998, pp. 108-112.
C-Publications à des congrès internationaux avec actes :
(C.1) S.Y. CHEN and J.B. BAI : "Crack propagation behaviour of metal alloys subjected to cycle and
monotone loading". Proc. of Int. Conf. on Analytical and Testing Methodologies for Design with
Advanced Materials, (Canada, 1987), Elsevier Science Publishers, 1988, pp. 151-159.
(C.2) J.B. BAI, C. PRIOUL, F. BARCELO and PELCHAT : "Influence of hydrides on the ductile-brittle
transition in stress-relieved, recrystallized and β-treated Zircaloy-4", Proc Int. Topical Meeting on LWR
Fuel Performance, 223-237, April, 1991, Avignon, France.
(C.3) J.B. BAI, C. PRIOUL and D. FRANÇOIS : "Effect of microstructure factors and cold-work on the hydride
precipitation in Zircaloy-4", Int. Satellite Conf. Mech. Charct. of New Mater., July 19-20, 1991, Japon,
conférencier invité.
(C.4) J.B. BAI, J. NI, D. GILBON, J.L. LEBRUN : "Stress oriented hydrides in recrystallized Zircaloy-4", Proc.
3rd Int. Conf. on Residual Stresses, July 24-26, 1991, Tokushima, Japon, Vol. 1, pp. 177-182.
(C.5) J.B. BAI, C. PRIOUL and D. FRANÇOIS : "Influence of hydrogen on the mechanical properties of
Zircaloy-4", Proc. 6th Int. Conf. of Materials, Kyoto, Japon, July 28-August 2, 1991, pp. 731-736.
(C.6) J.B. BAI, C. PRIOUL and D. FRANÇOIS : "Microscopic observations on the fracture initiation at
hydrides in Zircaloy-4", Proc. of 9th Euro. Conf on Fracture, Bulgarie, 21-25 Sep. 1992, pp. 541-546.
(C.7) J.B. BAI and D. FRANÇOIS : "Influence of hydrides on the strengths of Zircaloy-4 plate", Proc. of 8th
Int. Conf. on Fracture, Kiev, Ukraine, 1993, pp. 693-700.
(C.8) J.B. BAI and G.K. HU : "Free surface effect on residual stress relaxation", Proc. 1st Int. Symposium on
Residual Stresses, Nov., 1993, St. Etienne, France, pp. 251-258.
(C.9) Ph. SEELEUTHNER, J.B. BAI and D. BAPTISTE : "Micromechanical modelling of damage in a
glass/epoxy laminate", Proc. Int. Conf. on Localised Damage, Udine, Italy, June 1994, pp. 313-320.
(C.10) A. BEN DHIA, J.B. BAI, D. FRANÇOIS, V. GRIGORIEV and B. JOSEFSSON: "A new J1c
measurement method for tubular structures", Proc. 7th Int. Symposium on Tubular structures, Aug. 28 30, 1996, University of Miskolc, Hungary, Farkas & Jarmai eds., pp. 381-386.
(C.11) V. GRIGORIEV, B. JOSEFSSON and J.B. BAI: "A novel fracture toughness testing method for irradiated
tubing-experimental results and 3D numerical evaluation", Proc. 14th Int. Conf. on Structural
Mechanics in Reactor Technology, Aug. 17-22, 1997, Lyon, France.
D-Publications à des congrès nationaux avec actes (depuis 1990) :
(D.1) J.B. BAI, C. PRIOUL, F. BARCELO et PELCHAT : "Comportement mécanique du Zircaloy-4 chargé en
hydrogène", Journées d’études sur le zirconium, Lyon, 10-11 Octobre, 1990, France.
- 2 - liste des publications
(D.2) P. KAPETANAKOS, J.B. BAI et S. LANSIART : “Etude sur la ductilité des hydrures entre 20 et 400°C
dans le Zircaloy-4”, Proc. Journées d’automne, Paris, 12-14 Octobre, 1993, France.
(D.3). F. BARCELO, A. ALAMO et J.B. BAI : "Caractérisation de l’orientation des hydrures induites par la
contrainte dans un alliage base zirconium", ibid.
(D.4) J.B. BAI , J.L. XIE et C.V. RODRIQGES : "Modélisation analytique du procédé du cofilage", ibid.
(D.5) Ph. SEELEUTHNER, J.B. BAI et Ph. Bompard : "Influence des défauts de fabrication sur les mécanismes
d'endommagement dans un tube composite fibre de verre-résine époxyde", Proc. Journées d’automne,
Paris, 18-20 Octobre, 1994.
E-Thèses :
(E1)
(E2)
(E3)
J.B. BAI : "Propriétés en fatigue et corrosion-fatigue d'une Stellite (2Cr12Mo1V)", Thèse de Master
(3ème cycle), 1984, Université Jiaotong de Xi'an, R.P. Chine.
J.B. BAI : "Nocivité des hydrures dans le Zircaloy-4", Thèse de Doctorat, 1991, Ecole Centrale Paris,
France.
J.B. BAI : " Contribution à l'étude du comportement mécanique et de l'endommagement des matériaux
hétérogènes", mémoire d’Habilitation à diriger des recherches, 1997, U. Franche-Comté.
F-Livre :
(F1)
J.B. BAI : ''Analyse expérimentale des contraintes: technique des mesures électriques'' (1987)
G-Rapports
(G1-3) J.B. BAI : "Nocivité des hydrures dans le Zircaloy-4, I, II et III", Rapports du contrat CEA-ECP, 19901991.
(G4) J.B. BAI et S. BOURGEOIS : "Comportement élastoviscoplastique du Zircaloy-4 détendu à 400°C",
Rapport du contrat EDF-ECP, 1992.
(G5-8) X.L. XIE et J.B. BAI : "Modélisation analytique du cofilage, I-IV", Rapports du contrat Câbleries de
Lens-ECP, 1992-1993.
(G9) P. KAPETANAKOS et J.B. BAI : "Study of the ductility of hydrides between 20 and 400°C in β treated
Zircaloy-4, Part I", Rapport du contrat CEA-ECP, 1993.
(G10) D. MARKOPOULOU et J.B. BAI : "Study of the ductility of hydrides between 20 and 400°C in β treated
Zircaloy-4, Part II", Rapport du contrat CEA-ECP, 1994.
(G11) M. COSTA et J.B. BAI : "3D Finite Element Modelling by CASTEM 2000 of a ring test", Rapport du
contrat ABB ATOM-ECP, 1994.
(G12) Z.Y. ZHOU et J.B. BAI : "Comportement mécanique des tubes tri-couches en polymères", Rapport du
contrat GDF-ECP, 1995.
(G13) A. BEN DHIA et J.B. BAI : "3D Finite Element Modelling of Pin-Loading Tention Test - J1c
Measurement of Tubular Structures", Rapport du contrat STUDSVIK-ECP, 1995.
(G14) Z.Y. ZHOU et J.B. BAI : "3D Finite Element Modelling of Pin-Loading Tention Test - J1c Measurement
of Tubular Structures", Rapport du contrat STUDSVIK-ECP, 1996.
(G15) J.B. BAI : "Modélisation micromécanique de composites organiques stratifiés (fibre de verre et résine
époxyde)", Rapport final du contrat EDF-ECP, 1992-1996.
(G16) M.Ch. RECORD et J.B. BAI : "Mise au point d'un système de l'hydruration contrôlée et à gradient",
Rapport du contrat EDF-ECP, 1995-1996.
(G17-21)S. ARSENE et J.B. BAI : "L’effet d'hydruration, d'oxydation et d’irradiation sur le comportement
mécanique du Zircaloy, I-V", Rapports du contrat ABB ATOM-EDF-ECP, 1995, 1996, 1997.
- 3 - liste des publications