Multipanel 5.25
Transcription
Multipanel 5.25
Gebrauchsanweisung User manual Manuel d'utilisation Manual del usuario Příručka uživatele Multipanel 5.25” Produkt-Nr.:91631 Beschreibung-Nr.:91631-a www.delock.com Kurzbeschreibung Diesen DeLock Multipanel können Sie in den 5.25“ Schacht Ihres PCs einbauen. Für die unterschiedlichen Gehäusefarben finden Sie im Lieferumfang austauschbare Frontblenden in schwarz, silber und beige. Sie können mit diesem CardReader 34 verschiedene Speicherkarten lesen und beschreiben, außerdem haben Sie noch die Möglichkeit verschiedene Geräte an das Multipanel anzuschließen. Technische Daten • für den Einbau im 5.25“ Schacht • USB 2.0 Card Reader 34 in 1 • 2 x USB 2.0 Ports • 1 x FireWire A Port • 1 x eSATA Port • Audio, Mikrofon • für Windows 98/98SE/ME/2000/XP • Unterstützt folgende Speicherkarten: Compact Flash I/II, IBM Micro Drive, Magic Gate, Smart Media, Smart Media ROM, xD, xD M-Type, xD H-Type, Secure Digital, mini SD, SD ROM, T-Flash, Micro SD, Multi Media Card-I, Multi Media Card-II, MMC 4.0, MMC Dual Voltage, MMC Plus, MMC Mobile, MMC Micro, RSHS-MMC, RS-MMC, RS-MMC Dual Voltage, RS-MMC 4.0, Memory Stick, MS Select, MS ROM, MS Pro, MS Magic Gate, MS-Pro Magic Gate, MS-Duo, MS-Duo Magic Gate, MS-Pro Duo, etc. Systemvorraussetzungen • PC mit einem freien 5.25“ Schacht • Windows 98/98SE/ME/2000/XP Packungsinhalt* • Multipanel mit Anschlusskabel • 1x silberne & 1x schwarze Frontblende • Treiber CD • Bedienungsanleitung *Überzeugen Sie sich vor Inbetriebnahme, dass alle Bestandteile des Lieferumfangs in der Verpackung enthalten sind. Sollte etwas fehlen oder beschädigt sein, wenden Sie sich bitte umgehend an Ihren Fachhändler. -- Hardware Installation Hinweis: Folgen Sie den hier anschließenden allgemeinen Anweisungen zur Installation des CardReaders. Bei Bedarf lesen Sie bitte in Ihrem Computerhandbuch nach oder wenden Sie sich an einen Fachmann. 1. Schalten Sie Ihren PC aus, ziehen Sie das Netzkabel. 2. Öffnen Sie das Gehäuse. 3. Entfernen Sie die Blende vom gewünschten freien 5.25“ Schacht. 4. Stecken Sie den Multipanel in den Schacht und schrauben Sie diesen an den Seiten fest. 5. Verbinden Sie anschließend die Kabel des Multipanels mit den entsprechenden Anschlüssen in bzw. an Ihrem Computer. 6. Schließen Sie das Gehäuse wieder und verbinden Sie das Netzkabel mit dem Netzteil. Treiber Installation Windows 2000/XP 1. Schalten Sie den Computer ein. 2. Der Multipanel wird erkannt und Sie können das Gerät sofort verwenden. Windows 98/ME 1. Schalten Sie den Computer ein. 2. Danach erscheint von Windows der Hardware Assistent. 3. Klicken Sie auf “Abbrechen“. 4. Legen Sie die Treiber CD in Ihr Laufwerk. 5. Öffnen Sie den Order: "Driver V1.26.\Setup_1.26“, klicken Sie auf “Weiter“. 6. Sobald die Meldung erscheint, "Please Plug in the Driver....", klicken Sie auf “ok“. 7. Wählen Sie “Ja, Computer neu starten“ und auf “Fertig stellen“. -- Support Delock Bei weitergehenden Supportanfragen wenden Sie sich bitte an support@delock. de / www.delock.de oder telefonisch unter 0700 - DELOCKGE (0700 - 335 625 43). Sie können die Service-Line zu folgenden Zeiten erreichen: Mo – Fr: 9:00 – 17:30 Uhr brutto 0,12/min* Alle Anrufer außerhalb Deutschlands wählen bitte 00493081789324 *Es entstehen Ihnen Verbindungsentgelte gemäß der Verbindungspreisübersicht der Deutschen Telekom AG bzw. Ihres Telefonanbieters für ein Gespräch zur Ortseinwahl. Aktuelle Produktinformationen und Treiber Downloads finden Sie auch auf unserer Homepage: www.delock.de Schlussbestimmung Die in diesem Handbuch enthaltenen Angaben und Daten können ohne vorherige Ankündigung geändert werden. Irrtümer und Druckfehler vorbehalten. Copyright Ohne ausdrückliche schriftliche Erlaubnis von Delock darf kein Teil dieser Bedienungsanleitung für irgendwelche Zwecke vervielfältigt oder übertragen werden, unabhängig davon, auf welche Art und Weise oder mit welchen Mitteln, elektronisch oder mechanisch, dies geschieht. Stand: 07/2006 -- Description This DeLock multipanel can be installed into the 5.25” drive bay of your PC. Black, silver and beige front bezel are included for different chassis colors. This card reader can read and write 34 different memory card formats, futhermore you can connect different devices to the multipanel. Specification • For 5.25” bay mounting • USB 2.0 Card Reader 34 in 1 • 2 x USB 2.0 ports • 1 x FireWire A port • 1 x eSATA port • Audio, microphone • For Windows 98/98SE/ME/2000/XP • Supports following memory cards: Compact Flash I/II, IBM Micro Drive, Magic Gate, Smart Media, Smart Media ROM, xD, xD M-Type, xD H-Type, Secure Digital, mini SD, SD ROM, T-Flash, Micro SD, Multi Media Card-I, Multi Media Card-II, MMC 4.0, MMC Dual Voltage, MMC Plus, MMC Mobile, MMC Micro, RSHS-MMC, RS-MMC, RS-MMC Dual Voltage, RS-MMC 4.0, Memory Stick, MS Select, MS ROM, MS Pro, MS Magic Gate, MS-Pro Magic Gate, MS-Duo, MS-Duo Magic Gate, MS-Pro Duo, etc. System requirements • PC with one free 5.25” Bay • Windows 98/98SE/ME/2000/XP Package content* • Multipanel with cables • 1x silver & 1x black colour front bezel • Driver CD • User manual *Make sure that product package contains all items before operation. If any item is missing or damaged, then please contact your dealer immediately. Hardware Installation Note: Follow the general instructions for installation of the CardReader. If necessary, read the manual of your computer, or ask a specialist for help. -- 1. 2. 3. 4. 5. Turn off your PC, and unplug the power cord. Open the housing. Remove the panel from the available 5.25” bay. Insert the multipanel into the bay and screw the multipanel to the housing. Connect the cables of the multipanel to the Mainboard resp. outside of the housing. 6. Reattach the housing, and connect the power cord to the AC adapter. Driver Installation Windows 2000/XP 1. Switch on your computer. 2. The Multipanel will be recognized and you can start using the device immediately. Windows 98/ME 1. Switch on your computer. 2. Afterwards, Windows displays the Hardware wizard. 3. Click on "cancel". 4. Put the driver CD in the CD ROM drive. 5. Open the folder: "Driver V1.26.\Setup_1.26“, click “Next”. 6. As soon as the message appears ”Please Plug in the Driver....”, click on “ok“. 7. Choose “Yes, restart computer“ and click “Finish“. -- Support Delock If you have further questions, please contact our customer support [email protected] / www.delock.com or phone 0700 - DELOCKGE (0700 - 335 625 43). You can contact our service hotline during the following times: Mon – Fri: 9:00 – 17:30 pm charge 0,12 € / min* * A connection fee applies according to fee schedule of Deutsche Telekom AG or your local telephone provider. All callers outside of Germany dial please 00493081789324 You can find current product information on our homepage: www.delock.com Final clause Information and data contained in this manual are subject to change without notice in advance. Errors and misprints excepted. Copyright No part of this user's manual may be reproduced, or transmitted for any purpose, regardless in which way or by which means, electronically or mechanically, without explicit written approval of Delock. Edition: 07/2006 -- Description Ce lecteur de cartes DeLock peut s'installer dans la baie de lecteur 5.25” de votre PC. Des caches assortis noir, argent et beige sont également inclus pour les différentes couleurs de boîtiers. Ce lecteur de carte peut lire et écrire 34 formats différents de carte mémoires, de plus vous pouvez brancher différents périphériques sur le panneau multiple. Spécifications techniques • pour monter dans une boîte de 5.25” • USB 2.0 34 dans un lecteur de cartes • 2 x USB 2.0 ports • 1 x FireWire A port • 1 x eSATA port • Audio, microphone • Pour Windows 98/98SE/ME/2000/XP • Prend en charge les cartes: Compact Flash I/II, IBM Micro Drive, Magic Gate, Smart Media, Smart Media ROM, xD, xD M-Type, xD H-Type, Secure Digital, mini SD, SD ROM, T-Flash, Micro SD, Multi Media Card-I, Multi Media Card-II, MMC 4.0, MMC Dual Voltage, MMC Plus, MMC Mobile, MMC Micro, RSHS-MMC, RS-MMC, RS-MMC Dual Voltage, RS-MMC 4.0, Memory Stick, MS Select, MS ROM, MS Pro, MS Magic Gate, MS-Pro Magic Gate, MS-Duo, MS-Duo Magic Gate, MS-Pro Duo, etc. Configuration système requise • PC avec une baie 5.25” disponible • Windows 98/98SE/ME/2000/XP Contenu de l’emballage* • Lecteur de cartes avec câbles • Couvercle noir et argent • CD d’installation des pilotes • Manuel d’utilisation *Assurez-vous que l'emballage du produit contient tous les éléments avant de procéder. Si un quelconque élément venait à manquer ou était endommagé, veuillez contacter immédiatement votre revendeur. -- Installation matérielle Note: Suivez les instructions générales pour l'installation du lecteur de cartes. Si nécessaire, consultez le manuel de votre ordinateur, ou demander l'aide d'un spécialiste. 1. 2. 3. 4. 5. Eteignez votre PC et débranchez le cordon d'alimentation. Ouvrez le boîtier. Enlevez le panneau de la baie 5.25” disponible. Insérez le Lecteur de cartes dans la baie et vissez le dans son logement. Branchez les câbles du panneau multiple sur la carte mère respectivement hors du boîtier. 6. Remontez le boîtier et branchez le cordon d'alimentation et l'adaptateur AC. Installation du pilote Windows 2000/XP 1. Allumez votre ordinateur. 2. Le lecteur de cartes est reconnu et vous pouvez immédiatement commencer à l'utiliser. Windows 98/ME 1. Allumez votre ordinateur. 2. Ensuite, Windows affiche l'assistant matériel. 3. Cliquez sur "Annuler". 4. Mettez le CD pilote dans le lecteur CD ROM. 5. Ouvrez le dossier: " Driver V1.26.\Setup_1.26“, cliquez sur “ Continuer”. 6. Aussitôt que le message ”Please Plug in the Driver....” apparaît, cliquez ensuite sur “ok“. 7. Choisissez “Oui, redémarrer l'ordinateur“ et cliquer sur “Terminer“. -- Assistance Delock Si vous avez d'autres questions, veuillez contacter notre assistance client: [email protected] / www.delock.fr ou par téléphone 0700 - DELOCKGE (0700 - 335 625 43). Vous pouvez contacter notre service hotline aux horaires suivants: Lun – Ven: 9:00 – 17:30 tarif 0,12€ / min* * Des frais de connexion s'appliquent selon les tarifs horaires de Deutsche Telekom AG ou de votre prestataire de téléphonie local. Pour les appels hors d'Allemagne, veuillez composer le 00493081789324 Vous pouvez trouver les informations sur nos produits actuels sur notre page d'accueil: www.delock.fr Clause finale Les informations et données contenues dans ce manuel sont sujettes à modifications sans préavis. Sont exclues les erreurs et les fautes d'impression. Copyright Aucune partie de ce manuel d'utilisation ne peut être reproduite ou transmise, quel qu'en soit le but, et sous quelque moyen que ce soit, électronique ou mécanique, sans l'approbation écrite expresse de Delock. Version: 07/2006 -- Descripción El lector de tarjetas DeLock se puede instalar en un hueco para unidad de 5,25” de su equipo. Se incluyen frontales negros, plateados y beige para obtener chasis de distintos colores. Este lector de tarjetas puede leer y escribir 34 formatos de tarjetas de memoria distintos; además, puede conectar dispositivos diferentes al multipanel. Especificación técnica • para instalarlo en un hueco de unidad de 5,25” • Lector de tarjetas USB 2.0 34 en 1 • 2 x USB 2.0 puertos • 1 x FireWire A puerto • 1 x eSATA puerto • Audio, micróphono • Para Windows 98/98SE/ME/2000/XP • Admite memoria: Compact Flash I/II, IBM Micro Drive, Magic Gate, Smart Media, Smart Media ROM, xD, xD M-Type, xD H-Type, Secure Digital, mini SD, SD ROM, T-Flash, Micro SD, Multi Media Card-I, Multi Media Card-II, MMC 4.0, MMC Dual Voltage, MMC Plus, MMC Mobile, MMC Micro, RSHS-MMC, RS-MMC, RS-MMC Dual Voltage, RS-MMC 4.0, Memory Stick, MS Select, MS ROM, MS Pro, MS Magic Gate, MS-Pro Magic Gate, MS-Duo, MS-Duo Magic Gate, MS-Pro Duo, etc. Requisitos del Sistema • Equipo con un hueco libre para una unidad de 5,25” • Windows 98/98SE/ME/2000/XP Contenido del paquete* • Lector de tarjetas con cable • 1 panel frontal plateado y 1 negro • Driver en CD • Manual del usuario *Asegúrese de que el paquete del producto contenga todos los elementos antes de su funcionamiento. Si falta o hay algo dañado, por favor póngase en contacto con su distribuidor inmediatamente. -10- Hardware Instalación Nota: Siga las instrucciones generales para la instalación de la lector de tarjetas. En caso necesario, lea el manual de su equipo o pida ayuda a un especialista. 1. 2. 3. 4. Apague su equipo y desconecte el cable de alimentación. Abra la carcasa. Retire el panel del hueco para unidad de 5.25”. Inserte el lector de tarjetas en el hueco y sujete el lector de tarjetas a la carcasa con tornillos. 5. Conecte los cables del multipanel a la placa base resp. fuera de la carcasa. 6. Vuelva a colocar la carcasa y conecte el adaptador de CA del cable de alimentación. Instalación del controlador Windows 2000/XP 1. Encienda su PC. 2. Le lector de tarjetas será reconocida y podrá comenzar a utilizar el dispositivo inmediatamente. Windows 98/ME 1. Encienda su PC. 2. A continuación, Windows mostrará el asistente para hardware. 3. Clic en "Anular". 4. Inserte el CD del controlador en la unidad de CD ROM. 5. Abra la carpeta: "Driver V1.26.\Setup_1.26”, clic en “Continuar”. 6. Tan pronto como aparezca el mensaje " Please Plug in the Driver....”, clic en "Aceptar". 7. Elija "Sí, reiniciar el equipo" y haga clic en "Finalizar". -11- Soporte técnico Delock Si tiene alguna pregunta, póngase en contacto con nuestro servicio de atención al cliente [email protected] / www.delock.es o llamando al teléfono 0700 - DELOCKGE (0700 - 335 625 43). El horario de atención de nuestro número de teléfono de atención al cliente es: Lun – Vie: 9:00 – 17:30 Coste de la llamada 0,12 / min* * Se aplicará una tarifa de conexión en función del horario de tarifas de Deutsche Telekom AG o de la compañía telefónica local. Para llamadas fuera de Alemania, marcar el teléfono: 00493081789324 Puede encontrar información actual del producto en nuestra página Web: www. delock.es Cláusula final La información y los datos contenidos en este manual están sujetos a cambios sin previo aviso. Exceptuando errores y erratas. Copyright Queda prohibida la reproducción o transmisión para cualquier fin de parte alguna de este manual del usuario, independientemente de la forma en que se realice, ya sea, electrónicamente o mecánicamente, sin el consentimiento escrito de Delock. Versión: 07/2006 -12- Popis DeLock multipanel může být instalován do 5.25” pozice vašeho PC. Pro instzalaci do skříní různé barvy jsou součástí produktu výměnné kryty v černé, stříbrné a béžové barvě. Čtečka může číst paměťové karty 34 různých formátů, k panelu je navíc možné připojit také různá další zařízení. Specifikace • Pro zabudování do 5.25” pozice • USB 2.0 čtečka paměťových karet 34 v 1 • 2 x USB 2.0 porty • 1 x FireWire A port • 1 x eSATA port • Audio, mikrofon • pro Windows 98/98SE/ME/2000/XP • Podporuje paměťové karty: Compact Flash I/II, IBM Micro Drive, Magic Gate, Smart Media, Smart Media ROM, xD, xD M-Type, xD H-Type, Secure Digital, mini SD, SD ROM, T-Flash, Micro SD, Multi Media Card-I, Multi Media Card-II, MMC 4.0, MMC Dual Voltage, MMC Plus, MMC Mobile, MMC Micro, RSHS-MMC, RS-MMC, RS-MMC Dual Voltage, RS-MMC 4.0, Memory Stick, MS Select, MS ROM, MS Pro, MS Magic Gate, MS-Pro Magic Gate, MS-Duo, MS-Duo Magic Gate, MS-Pro Duo, atd. Systémové požadavky • PC s volnou 5.25” pozicí • Windows 98/98SE/ME/2000/XP Obsah balení* • Multipanel s kabely • 1x střábrný & 1x černý výměnný přední kryt • CD s ovladači • uživatelská příručka *Před použitím se ujististěte, zda balení obsahuje všechny položky. Pokud něco chybí nebo je poškozeno, kontaktujte prosím svého prodejce. -13- Instalace hardware Poznámka: Postupujte podle obecných instrukcí pro instalaci čtečky paměťových karet. Pokud to bude nutné, použijte i manuál vašeho PC nebo požádejte o pomoc specialistu. 1. 2. 3. 4. 5. 6. Vypněte PC a odpojte napájecí šňůru. Otevřete kryt PC. Odstrańte krycí panel z volné 5,25” pozice. Vložte multipanel a přišroubujte jej ke skříni PC. Připojte kabely multipanelu k základní desce nebo na externí konektory PC. Zavřete kryt PC a připojte napájecí šňůru. Instalace ovladače Windows 2000/XP 1. Zapněte počítač. 2. Multipanel je detekován a může být ihned používán. Windows 98/ME 1. Zapněte počítač. 2. Windows zobrazí Průvodce instalací. 3. Klikněte na "cancel" (“zrušit”). 4. Vložte CD s ovladači do mechaniky. 5. Otevřete soubor z CD: "Driver V1.26.\Setup_1.26“, pak klikněte na “Next” (Pokračovat”). 6. Jakmile se objeví zpráva ”Please Plug in the Driver....”, klikněte na “ok“. 7. Zvolte “Ano, restartovat nyní“ a na „Ukončit instalaci“. -14- Technická podpora S dalšími technickými otázkami můžete kontaktovat naše středisko podpory: [email protected] nebo telefonicky +49 30 81789324 (pouze německy nebo anglicky) * Servisní středisko je v provozu v pracovní dny od 9:00 do 17:30 hodin *Bezplatné hovory z České a Slovenské republiky nejsou možné. Další informace vám může zprostředkovat rovněž prodejce, u kterého byl výrobek zakoupen. Aktuální informace o produktu můžete nalézt i na našich webových stránkách http://www.delock.com Závěrečné upozornění Informace a data obsažená v této příručce mohou být změněny bez předchozího upozornění. Za tiskové chyby neručíme. Copyright Bez předchozího písemného výslovného svolení od Delocku nesmí být použita žádná část této příručky pro jakékoliv účely rozmnožování, překládání nebo dalších úprav nezávisle na tom, jakým způsobem nebo jakými prostředky k tomu dochází (elektronicky nebo mechanicky). Ochranná známka Delock je registrovaná obchodní značka a bez písemného svolení jejích vlastníků nesmí být používána. Nesmí být v žádném případě upravena nebo doplněna. Ochranné známky, obchodní jména, značky a názvy produktů použité v této příručce mohou být registrovanými ochrannými známkami třetích firem zapsanými u příslušných úřadů. verze: 07/2006 -15-