M7321-174000-9 T-shirt m/05 kä grbr T-shirt m/05 short

Transcription

11FMV69-35:1
1(16)
TECHNICAL SPECIFICATION 11786 D
Armed Forces General Services Office
115 88 STOCKHOLM
2011-03-18
T-shirt m/05
Ingrid Bergh, phone: +46 8 782 4024
M7321-174000-9
M7321-173000-0
M7321-175000-8
M7321-176000-7
T-shirt m/05 kä grbr
T-shirt m/05 lä grbr
T-shirt m/05 kä mblå
T-shirt m/05 kä vit
T-shirt m/05 short sleeve green brown
T-shirt m/05 long sleeve green brown
T-shirt m/05 short sleeve dark blue
T-shirt m/05 short sleeve white
Table of contents
1.
DESCRIPTION ......................................................... 2
2.
APPLICABLE DOCUMENTS .................................. 3
3.
PRODUCT REQUIREMENTS .................................. 5
4.
MANUFACTURING ............................................... 10
5.
MEASUREMENTS ................................................. 11
6.
QUALITY ASSURANCE ........................................ 13
7.
PACKING INSTRUCTIONS ................................... 15
Confirmed:
Date: 2011-03-30
Helena Lundberg
Product manager
Quartermaster materiel
11FMV69-35:1
2(16)
115 88 STOCKHOLM
2011-03-18
T-shirt m/05
1.
DESCRIPTION
Short sleeve and long sleeve T-shirt knitted in 55 % modacrylic and
45 % cotton. The material composition results in flame retardant properties.
The T-shirt is produced in three colours, green brown, dark blue and white. The
garment is made of single jersey with a 1x1 neck rib.
The T-shirt is produced in 6 sizes (3-8).
11FMV69-35:1
3(16)
115 88 STOCKHOLM
2011-03-18
T-shirt m/05
2.
APPLICABLE DOCUMENTS
For documents mentioned in this Technical Specification, issues which are
current at the time of the enquiry will apply.
2.1
EN 12127
Determination of mass per unit area using small
samples
2.2
EN ISO 6330
Domestic washing and drying procedures for textile
testing
7. Washing procedure
Table 1: Machine Type A1
Procedure 2A 60C
8. Drying procedure
8.5 Tumble dry
2.3
EN ISO 5077
Determination of dimensional change in washing and
drying
2.4
EN ISO 105-C06
Colour fastness to domestic and commercial
laundering
4.3.2 Two single-fibre adjacent fabrics
6. Test No C1S 60C
4.4 b) ECE Detergent
2.5
EN ISO 105-B02/A1 Colour fastness to artificial light: Xenon arc fading
lamp test ISO 105-B02:1994/Amd 2:2000
4.1.1 References 1 to 8
6.1 Conditions preferable for use in Europe
a) Normal conditions
7.1.2 Method 1
2.6
EN ISO 105-E04
Colour fastness to perspiration
4.5.2 Two single-fibre adjacent fabrics
2.7
EN ISO 2062
Yarn from packages – Determination of single-end
breaking force and elongation at break
2.8
ISO 4915
Stitch types - Classification and terminology
11FMV69-35:1
4(16)
115 88 STOCKHOLM
2011-03-18
T-shirt m/05
2.9
EN ISO 4589-2/A1
2006
Measuring the minimum oxygen concentration to
support candle-like combustion of plastics (oxygen
index). Determination of LOI-value.
2.10
EN 1103
Burning behaviour-Fabrics for apparel-Detailed
procedure to determine the burning behaviour of
fabrics for apparel.
2.11
ISO 16322-3
Determination of spirality change after launderingPart: 3 Woven and knitted garments
2.12
EN ISO 105-X12
Colour fastness to rubbing
2.13
EN ISO 9001
Quality management systems – Requirements.
Permissible exclusions: Sub-clause 7.3: design and
development
2.14
Öko-Tex
Standard 100
General and special conditions
Product class II
2.15
FSD A4702:116
Ownership mark (crown mark)
Size 3
The colour in the technical specification refer to the Pantone Colour System
www.pantone.com
A model will be supplied by FMV in connection with the FMV production
briefing to the appointed manufacturer. In the case of any difference
between the model and this Technical Specification, the Technical
Specification shall take precedence.
If any documentation supplied by FMV should seem incorrect, FMV must be
informed about this. No drawings or specifications may be altered without
the agreement of FMV.
11FMV69-35:1
5(16)
115 88 STOCKHOLM
2011-03-18
T-shirt m/05
3.
PRODUCT REQUIREMENTS
3.1
General:
The workmanship must conform to the industry standard for the manufacture of
quality goods as described below.
Material provided by the supplier must be of the quality as required below and
must be approved by FMV before being used.
Colours:
All material, except the label, included in this product to be:
a) Green brown as the colour and fabric sample.
Guideline for green brown colour: Pantone 19-0820 TCX
b) Dark blue as the colour and fabric sample.
Guideline for dark blue colour: Pantone 19-4013 TCX
c) White as the colour and fabric sample.
Guideline for the white colour: Pantone 11-4201 TCX
Colour and fabric sample may be ordered from:
FMV
FMgem prod
SE-115 88 Stockholm
Sweden
Fax: +46 (0)8 782 61 67
E-mail: [email protected]
3.2
Yarn:
Composition:
Yarn number:
55 % modacrylic/45 % cotton ring spun,± 7 % units
Nm 40/1
The modacrylic and the cotton shall be intimately blended, spun together. The
modacrylic shall be intended for apparel, and have inherent and permanent
flame retardant properties.
11FMV69-35:1
6(16)
115 88 STOCKHOLM
2011-03-18
T-shirt m/05
3.3
Knitted fabric:
Body fabric:
Neck rib:
3.3.1
3.4
1:1 rib 55 % modacrylic/45 % cotton,
mass per unit area 230 g/m² ± 7%, according to EN
It is important that the collar keeps its shape after wash.
Properties:
Colour fastness to wash
Colour fastness to light
Colour fastness to rubbing dry:
wet
LOI-value
Burning behaviour
Requierments:
min. 4
min. 4
min. 4
min. 4
min. 3-4
min. 30
No ignition
Test method:
EN ISO 105-C06, 60ºC
EN ISO 105-B02/A1
EN ISO 105-E04
EN ISO 105-X12
EN ISO 4589-2/A1 2006
EN 1103
Sewing thread:
All seams:
3.4.1
Single jersey 55 % modacrylic/45 % cotton,
mass per unit area 190g/m² ± 7%, according to EN 12127
Core spun polyester/cotton 280 dtex x2 (Ticket no. 120).
Properties:
Dimensional change
Tensile strength
Requierments:
min. 4
min. 4
min. 4
max. 1 % after
one wash
11 N
Test method:
EN ISO 105-C06, 60ºC
EN ISO 105-B02/A1
EN ISO 105-E04
EN ISO 5077
EN ISO 6330, 60ºC
EN ISO 2062
11FMV69-35:1
7(16)
115 88 STOCKHOLM
2011-03-18
T-shirt m/05
3.5
Marking:
The size of the label can be adapted to an automatic labelling machine.
3.5.1
Label:
Woven
Material:
100% polyester in
silver-grey colour
Size:
Width approx. 45 mm,
height approx. 85 mm excl. seam
allowance
The size and placing of the text and
figures in accordance with the
sketch.
Text and figures in black colour.
3.5.2
Sketch for label:
The label to show:
M-number
Ownership label (crown mark
according to FSD A4702:116, size 3)
Size and weight
Year of manufacture
Material composition
Maintenance instruction
Manufacturer
Country of manufacture
M7321-xxxxxx-x
T-SHIRT M/05
Chart for sizes and weight
20XX
Size
3
4
5
6
7
8
55 % MODAKRYL
45 % BOMULL
The size and placing of the
figures according to the sketch.
60°
FIRMA/COMPANY
LAND/COUNTRY
Weight
50-60
60-70
70-80
80-95
95-110
110-
11FMV69-35:1
8(16)
115 88 STOCKHOLM
2011-03-18
T-shirt m/05
3.5.3
Properties:
Colour fastness to
washing
Requirement:
min. 4-5
Dimensional change max. 2 %
warp/weft,
after washing
Colour fastness to
perspiration
min. 4
Test method:
EN ISO 105-C06
4.3.2 Two single-fibre
adjacent fabrics
6
Test No C1S 60°C
4.4 b) ECE Detergent
EN 25077
EN ISO 6330
5
Washing procedure
Table 1:Machine Type A1
Procedure 2 A 60°C
6.5
Tumble dry
EN ISO 105-E04
4.5.2 Two single-fibre adjacent
fabrics
3.5.4
Placement of the label:
The label to be folded and stitched in the neck seam centre back on the
inside of the T-shirt with the crown mark visible.
3.5.5
Ownership mark, Crown mark as per FSD A4702:116, size 3.
Merchandise, that has been crown marked and rejected during production,
or at delivery control, must not be sold by the supplier on the public market
before the crown mark has been removed or obliterated
(Act of law 1970-06-29, SFS nr 498/1970).
11FMV69-35:1
9(16)
115 88 STOCKHOLM
2011-03-18
T-shirt m/05
3.6
Requirements for the ready-made garment:
3.6.1
Properties:
Dimensional change
length:
width:
Determination of spirality after
laundering
Requierments:
max. 7 %
max. 3 %
after one wash
max .3 %
Test method:
EN ISO 5077
EN ISO 6330, 60ºC
ISO 16322-3
3.6.2
The requirements in Öko-tex Standard 100 to be fulfilled, general and special
conditions, Product class II
3.6.3
Nonylephenol Ethoxylate (NPE) is not permitted in the ready-made T-shirts
or any step of the manufacture process of the T-shirts.
The maximum limit of NPE is 50mg/kg
11FMV69-35:1
10(16)
115 88 STOCKHOLM
2011-03-18
T-shirt m/05
4.
MANUFACTURING
4.1
Knitting
4.1.1
Body fabric:
Circular knitting machine
24 gauge
Machine:
Knitting method: Plain knitting
Collar fabric:
Circular knitting machine
15 gauge
1 x1 rib
4.2
Making up the T-shirts – sewing
4.2.1
General technical manufacturing requirements:
– The fabric to be relaxed before cutting.
– All seams to be locked at both ends.
4.2.2
EN ISO 4915 Stitch types – Classification and terminology
4.3
Sewing machines:
4.3.1
1-needle overlock, 3 threads, stitch type 504, seam width 4 mm.
Stitches/cm: 4.
– Making up the collar
– Making up the shoulder seams
– Making up the sleeves (or sleeve/side seam)
– Attaching the sleeves and collar
4.3.2
2-needle chain stitch with looper thread, 3 threads, stitch type 406,
stitches/cm: 4. Distance between the needles 5 mm.
– Hemming the sleeves and shirt bottom edge
4.3.3
2-needle double chain stitch machine, 4 threads, stitch type 2 x 401.
Stitches/cm: 4-5. Distance between the needles 8 mm. Folded tape width
10 mm.
– Attaching the reinforcing tape from one shoulder over the neck to the
other shoulder at the wrong side of the shirt. The tape is made of cross
cut body fabric.
M7321-xxxxxx
20XX
VIKT
60-70 kg
4
11FMV69-35:1
11(16)
115 88 STOCKHOLM
2011-03-18
T-shirt m/05
5.
MEASUREMENTS
All measurements in cm.
Tolerances: ± 1 cm.
Size:
Weight in kg:
Length from shoulder
Half chest
Sleeve length for short sleeve
Half sleeve hole
Shoulder width
Neck rib height
Half sleeve opening for short
sleeve
Neck width
Neck drop front
Half bottom
Sleeve length for long sleeve
Half sleeve opening for long
sleeve
A
B
C
D
E
F
G
3
50-60
69
48
21
24
15
3
18
4
60-70
71
51
22
25
16
3
19
5
70-80
73
54
23
27
17
3
20
6
80-95
75
57
24
28
18
3
21
H
I
K
L
M
14.5
10.5
48
55
10
15
11
51
58
10
16
11
54
61
11
16.5
12
57
63
11
F
7
8
95-110 110
78
81
60
63
25
25
29
31
19
20
3
3
22
23
17
12.5
60
65
12
E
C
D
G
B
H
A
I
K
17.5
12.5
63
67
12
11FMV69-35:1
12(16)
115 88 STOCKHOLM
2011-03-18
T-shirt m/05
F
E
L
D
B
A
K
M
11FMV69-35:1
13(16)
115 88 STOCKHOLM
2011-03-18
T-shirt m/05
6.
QUALITY ASSURANCE
Supplier's Commitments
The supplier shall establish and maintain an effective quality system that
meets the requirements of EN ISO 9001, Quality management systems Requirements. Permissible exclusion: Sub-clause 7.3, Design and
development.
The supplier shall provide FMV*, in good time before the start of
production, with reference samples and material together with documents
according to a, b, c, and d, listed below.
The requirements in this Technical Specification must be fulfilled.
a)
Reference samples from the production plant where the actual
production is placed:
2 T-shirts per size and colour, short and long sleeve.
b)
Test report from an independent laboratory, accredited to perform
test methods required in this specification, for:
- fabric
LOI-value
- fabric
Burning behaviour
- fabric
Spirality change after one wash
- ready-made garment
Dimensional change
- ready-made garment
- fabric
- fabric
Mass unit per area
- fabric
Colour fastness to rubbing
- fabric
c)
Technical data sheet, showing that the product fulfils the
requirements, for:
All including materials
d)
Separate samples of the following components shall be sent in:
- 2 meters of the body fabric
- Sewing thread on original cone, with readable labels
- 2 meters of the neck rib fabric
- Labels, all sizes, 2 pieces of
each size
FMV assesses and approves the received material.
11FMV69-35:1
14(16)
115 88 STOCKHOLM
2011-03-18
T-shirt m/05
Buyer's Quality Control
FMV reserves the right to review the supplier's quality system and to make
manufacturing and quality inspections during the current period of contract
in a way that FMV considers suitable.
* ADDRESS: FMV: FMgem prod, SE-115 88 Stockholm, Sweden
11FMV69-35:1
15(16)
115 88 STOCKHOLM
2011-03-18
T-shirt m/05
7.
7.1
7.2
7.3
PACKING INSTRUCTIONS
Ordering of packing
The order must be in writing and sent to:
FMCL, Styrmansgatan 14, 732 31 ARBOGA, SWEDEN.
E-mail: [email protected]
To state: - number of the current order, eg. LB-number
- stock-number and stock-designation
- desired number of boxes
- number of labels per size
FMCL encloses the adequate number of sealing tape required for the
ordered number of boxes.
Spare packing
The above mentioned packing shall be used exclusively in connection with
the current order. Any spare packing shall be returned to FMCL,
Styrmansgatan 14, 732 31 ARBOGA, SWEDEN. E-mail: [email protected].
Suppliers failing to do so will be charged for the spare packing items.
Types of cardboard boxes
Terms for different Size (mm)
boxes
LxWxH
K2
M7040-276010
7.4
7.5
7.6
7.7
570x380x 260
No. of
readypacked
boxes/
pallet
20
No. of
folded
boxes,
bundled/
pallet
Sizes (mm)
of bundled boxes
incl. height of
pallet
Weight
(kg)
bundled
boxes
incl. pallet
240
1350x1200x1250
280
Number of products per cardboard box
Type of box:
Number:
Stock-number:
No. of
folded
boxes/
bundle,
tied up
20
Stock-designation:
K2
70
M7321-174000-9 T-shirt m/05 kä grbr
K2
60
M7321-173000-0 T-shirt m/05 lä grbr
K2
70
M7321-175000-8 T-shirt m/05 kä mblå
K2
70
M7321-176000-7 T-shirt m/05 kä vit
Information about the quality of the cardboard boxes
The boxes are extra thick and specially treated for piling up and storing
during longer times.
Sealing tape
M7605-103107 The cardboard boxes shall be sealed with the supplied sealing tape in such
a way that the labels are not concealed. The bottom of the boxes shall be
sealed with a lengthwise sealing tape both on the inside and outside of the
box. Figure 1.
Information about the quality of the sealing tape
The sealing tape is to be wet with water in order to get affixed
The sealing tape is specially treated to protect the products against damp
and other damages.
11FMV69-35:1
16(16)
115 88 STOCKHOLM
2011-03-18
T-shirt m/05
7.8
Packing
Boxes not filled up N.B. More than one size in each cardboard box is not allowed.
If all of one size does not fill up the whole of a box, the vacant space shall
-be filled up with other suitable materials. This filling must not generate
dust or otherwise be detrimental to its contents.
Exceptions, if any must be approved by FMV.
The cardboard boxes shall be loaded on EUR pallets, 800 x 1200 mm.
The pallets to be in perfect condition. The boxes shall be secured on to
the pallet. The maximum height, including the pallet, is 1600 mm.
The supplier shall free of charge supply the requisite number of pallets.
Deliveries without required pallets will be replaced with new pallets.
The extra cost will be charged the contractor.
Type of pallets
7.9
Marking
Pre-printed data
Figure 2.
a) Stock-number (FBET)
b) Stock-designation (FBEN)
c) Number
d) Size
e) Number of the order
Data filled in by
the supplier
f) Date of packing
g) In exceptional cases, FMV may allow deviation from the stipulated
number of pieces in the boxes in written form. In such cases both the
bar-code and the figures are to be crossed out. The actual number of
pieces shall then be indicated with a felt pen on the label. Figure 2.
Position of the two To facilitate the end-user's scanning, please attach the labels evenly over
labels
the corresponding box print. Figure 1.
Figure 1.
Labels
Sealing tape both on the
inside and outside of the box
FBEN
XXXXXX
FBET
SAMMANF FBET
Figure 2.
M0000-000000-0
ANTAL
M0000-000000-0
BEST NR
00
00000-LB00000
FÖRP.DAG
STORLEK
000
År
See packing instruction 6.1
Mån
Dag
Fill in
År = Y e a r
M å n = M o n th
Dag = Day
År = Year
Mån = Month
Dag = Day

M7321-174000-9 T-shirt m/05 kä grbr T-shirt m/05 short

Transcription

Documents pareils

Inscription/Registration Course d`obstacles “Think you`re a Spartan

Tutorial: How to Mount an ISO File Using WinCDEmu

Motorcycle tyres and rims (metric series) — Part 1: Design guides

YFICHTEC - POUDMET - Fiche Technique par lot

E3 ISO Maker Manual 1.0

ISO 3166-1 NEWSLETTER VI-16

House of style - Erwan Boulloud

VIVES-Ebony-Grafito

Model: Alsacia Beige Size: 20 x 20cm Thickness: 8mm Material type