LED-RC 8 - Daily music
Transcription
LED-RC 8 - Daily music
1. Présentation générale Contrôleur professionnel pour IC 4 LED avec 4CH ou 8CH, permutable 9 boutons correspondant aux choix de couleurs instantanées 12 programmes de couleurs déclenchées par la musique 32 différents mélanges de couleurs avec variations de couleurs Vitesse et dimmer réglable avec les faders Fonction pleins feux et blackout Alimentation: DC 9V 300 mA Dimension: 180 x 130 x 50 mm Poids : 1 kg Fonctions principales : Mode select Fixed color / chase Pour sélectionner les modes Fixed Color / Chase 1 / Chase 2 / Spectrum mix 1. En mode fixed color : sélection du Rouge /Orange / Jaune / Vert / Cyan / Bleu / Violet / Magenta /Blanc 2. En mode Chase 2 (la LED clignote : 8 programmes ou programmes aléatoires) Fader Chase 1 En mode Chase 1 (la LED reste allumée), utilisez le fader pour choisir les programmes : Standard / Bright chase / Mood chase / spectrum random chase / Spectrum sequence chase / Dynamic chase / Red-Green+ Blue / Green-Red + Blue / Blue-Red / Yellow-Blue / Red-Green / Yellow-Green Fader Spectrum Mix Pour sélectionner 32 mélanges de couleurs Fader Speed Fader Fade Time Fader Master Black out Full on Sound to chase Pour régler la vitesse entre 0.1 et 2.5 secondes Pour régler le temps du fondu : quantité de couleur plus ou moins intense Utiliser pour le dimmer / fermeture de l’appareil Blackout de l’appareil Pleins feux Utilisez pour recevoir le signal audio en mode musical Face arrière : Commutateur alimentation Commutateur Channel Mode Entrée Sortie DMX Pour allumer/éteindre l’appareil Permuter entre le mode 4 CH et 8CH 9V 300mA min Sortie du signal DMX de l’appareil relié au contrôleur 2. Assignation de l’adresse Chaque fois que vous faîtes un branchement différent, vous devez reprogrammer l’adresse DMX. Il y a 2 façons pour le réglage de l’adresse DMX : Réglage manuel : a. Réglez le LED-RC8 sur le mode 4CH (l’adresse doit être 1, 2, 3 ou 4) ou sur le mode 8CH (l’adresse doit être 1, 2, 3, 4, 5, 6, 7, ou 8) b. Connectez tous les appareils au LED-RC8 et allumez-les. Bouton Adresse c. Maintenez enfoncer le bouton “blackout” pendant 5 secondes jusqu’à Chase 1 1 Chase 2 2 d. Le 1er appareil LED s’allume. Chase 3 3 e. Régler l’adresse du 1er appareil en appuyant sur les boutons ‘’chase Chase 4 4 Chase 5 5 Chase 6 6 Chase 7 7 Chase 8 8 ce que l’indicateur LED rouge clignote. 1-à 8’’. f. Appuyez sur le bouton “sound to chase” ou “full on” pour sélectionner les autres appareils et leur assigner une adresse DMX. g. Maintenez enfoncer le bouton “blackout” pendant 5 secondes pour sortir. Réglage automatique : a. Réglez le LED-RC8 sur le mode 4CH (l’adresse doit être 1, 2, 3 or 4) ou sur le mode 8 CH (l’adresse doit être 1, 2, 3, 4, 5, 6, 7, or 8). b. Connectez tous les appareils au LED-RC8 et allumez-les. c. Maintenez enfoncer le bouton “blackout” pendant 5 secondes jusqu’à ce que l’indicateur LED rouge clignote. d. Le 1er appareil LED s’allume. e. Appuyez sur le bouton “sound to chase” ou “full on” jusqu’à ce que les appareils LED s’allument. f. Appuyez sur le bouton “random” pour régler l’adresse automatiquement g. Maintenez enfoncer le bouton “blackout” pendant 5 secondes pour sortir. h. L’adresse des appareils dans la chaine sera 1234-1234-… (12345678-12345678-…) 3. Branchement du contrôleur Merci de vous reporter aux schémas ci-dessous pour brancher vos appareils: A. B. Attention : Avant de régler l’adresse, assurez-vous que les DIP switches 0 à 9 de tous les appareils soient en position “OFF”. EXPELEC SA, 74370 CHARVONNEX FRANCE 1. General Instructions A profession remote controller for IC 4 LED with 4Ch. /8Ch. Switchable 9 different hold-color buttons for instant colors 12 different color chases triggered by music 32 different mix colors, including color fade Speed and dimmer adjustable by fader Full on and blackout functions Power supply: DC 9V 300 mA Dimension: 180X 130 X 50 mm Weight: 1 kg Function Instructions: Mode select Fixed color / chase Use to select Fixed Color / Chase 1 / Chase 2 / Spectrum mix mode 1. In Fixed Color mode, use to select color on Red /Orange / Yellow / Green / cyan / Blue / Purple / Magenta /White 2. In Chase 2 mode (the LED blinking), use to select 8 chase or random chase. Chase 1 fader In Chase 1 (the LED on) mode, use the fader to select color chases on Standard chase / Bright chase / Mood chase / spectrum random chase / Spectrum sequence chase / Dynamic chase / Red-Green+ Blue / Green-Red + Blue / Blue-Red / Yellow-Blue / Red-Green / Yellow-Green Spectrum Mix fader Use to select 32 spectrum mix colors in Spectrum mix mode. Speed fader Use to adjust chase speed in the range of 0.1 to 2.5 seconds Fade Time fader Master fader Black out Full on Sound to chase Use to adjust fade time. Fade time is amount of one color to fade in or fade out Use to dimmer / shutter the fixture Blackout the fixture All lighting effect at once Use to receive audio signal for sound activated Rear View: Power Switch Turn On/Off the power Channel Mode Switch Translate between 4 addresses mode and 8 addresses mode DC Input DC 9V 300mA min DMX Output Output DMX signal to the connected fixture 2. Address setting Each time you make a different connection, you have to reset the address. There are two ways that you can set address for the LED lightings: Manual address setting: a. Set LED-RC8 to 4 Ch. (the address should be 1, 2, 3 or 4) or 8 Ch. Bouton Adresse Chase 1 1 Chase 2 2 Chase 3 3 Chase 4 4 d. The first LED lighting will be on. Chase 5 5 e. Set address for the first lighting by pressing the chase 1-8 buttons. (The address should be 1, 2, 3, 4, 5, 6, 7, or 8) mode. b. Connecting all LED lightings to the LED-RC8 and power them on. c. Hold the “black out” button for about 5 seconds until the red indicator LED blinking. f. Chase 6 6 Press the “sound to chase” or “full on” button to select other fixtures, Chase 7 7 and addressing for them. Chase 8 8 g. Press the “black out” button for about 5 seconds to exit address setting. Automatic address setting: a. Set LED-RC8 to 4 Ch. (the address should be 1, 2, 3 or 4) or 8 Ch. (the address should be 1, 2, 3, 4, 5, 6, 7, or 8) mode. b. Connecting all LED lightings to the LED-RC8 and power them on. c. Hold the “black out” button for about 5 seconds until the red indicator LED blinking. d. The first LED lighting will be on. e. Press the “sound to chase” or “full on” button until all LED lightings on. f. Press “random” button to set address automatically. g. Press the “black out” button for about 5 seconds to exit address setting. h. The address of lightings in the chain will be 1234-1234-… (12345678-12345678-…) 3. How to connect the unit Please refer to the following diagram to connect the fixtures: A. B. Attention: Before address setting, be sure DIP switches 0 to 9 of all lightings are in “OFF” position. EXPELEC SA, 74370 CHARVONNEX FRANCE