HP BladeSystem Ethernet interconnects family - Inmac

Transcription

Data sheet
HP BladeSystem Ethernet
interconnects family
Reduce your network costs for better performance
February 2013
Data sheet | HP BladeSystem Ethernet
How do you reduce network costs while increasing server
density and performance? With HP BladeSystem c-Class
Ethernet switches.
Simplify your network with our complete portfolio of
Ethernet blade switches
HP has set out to redefine the data center. We started with our BladeSystem c-Class, a simple,
modular infrastructure that is designed to save your time, energy, and money—regardless of
what you put inside. But to be efficient, a data center must be able to access and disseminate
data instantaneously, securely, and reliably. That is where the HP portfolio of Ethernet
switching products can make a difference. HP BladeSystem c-Class switches provide a rich
set of networking features such as advanced Layer 2/3 switching, converged fabric, security,
virtual LANs (VLANs), Spanning Tree Protocol (STP), network failover recovery, and resiliency.
These switches lower the cost of maintenance and operation and increase network reliability
by sharing the same redundant power and cooling resources as the server blades do, while
aggregating cables and reducing wiring clutter.
An Ethernet switch for every application
Whether you are looking for basic network connectivity for a remote office or a high-bandwidth,
low-latency link for a high-performance computing cluster, HP Ethernet switches provide the
solution. You can choose from simple-to-configure 1 Gb switches, 1 Gb/10 Gb hybrid switches
designed especially for data centers in transition, or a powerful 40 Gb switch perfect for
handling data from today’s multiprocessor virtualized servers.
If your data center is challenged with an ever-increasing appetite for bandwidth, look to HP for
the answer. When coupled with our high-performance server blades and mezzanine cards,
our Ethernet switches can also support iSCSI and converged fabric standards all over a single
network connection. These protocols are designed to move data more efficiently and with less
overhead than standard methods. It is all about value, reliability, connectivity, and scalability.
Redefining the data center and simplifying your job, that is what the HP Ethernet blade switch
portfolio is all about.
HP 6125 Blade Switch series
Introducing the next-generation Ethernet blade switches from HP Networking. Designed from
the ground up with the latest switching technology and configured with processing power and
memory usually reserved for higher-density rack switches, the HP 6125 switch series brings a
new level of network access to the c-Class enclosure.
HP 6125 switch series run on Comware, a common operating system for blade, top of rack,
and core Ethernet switches from HP Networking. The use of a common OS means that today’s
demanding data centers can be managed and configured from edge-to-edge under a single
stream of firmware using common configuration scripts, troubleshooting procedures, and
upgrade policies. HP 6125 switches can be combined into a single virtual switch with the
Intelligent Resilient Framework (IRF) feature. HP IRF provides the ability to flatten data center
and campus networks, helping eliminate the need for multiple tiers of aggregation switches and
unutilized data paths. IRF provides a framework that enhances Ethernet and provides better
link management, utilization, and redundancy.
These switches also provide a robust Quality of Service (QoS) feature allowing you to create
traffic classes based on access control lists (ACLs), IEEE 802.1p precedence, IP, DSCP, or Type
of Service (ToS) precedence; support filter, redirect, mirror, or remark; support the following
congestion actions: strict priority (SP) queuing, weighted round robin (WRR), weighted fair
queuing (WFQ), weighted random early discard (WRED), weighted deficit round robin (WDRR),
and SP+WDRR.
2
All HP 6125 switch series provide layer 3 routing and are IPv6 compatible. And, just like all other
HP Networking switches, the HP 6125 switch series can be managed through the HP Intelligent
Management Center (IMC). HP IMC is a next-generation management software, which provides
the data center operations team with a comprehensive single pane of glass management
platform that integrates network technologies and provides full fault tolerance, configuration,
accounting, performance, and security management functionality. There are currently two
HP 6125 switches available—the HP 6125G, a 1 Gb model and the HP 6125G/XG, a 1 Gb/10 Gb
hybrid version.
HP 6120 Blade Switch series
HP 6120 Blade Switch series is designed specifically for the BladeSystem c-Class enclosure.
There are two models to choose from, each fine-tuned to your specific data center needs.
HP 6120XG Blade Switch is a 24-port 10 Gb switch with up to eight small form-factor pluggable
(SFP+) uplinks. Designed for today’s most demanding data center requirements, the 6120XG
Blade Switch is a low-latency, high-performance switch perfect for high‑performance
computing clusters, financial services, and application service provider applications.
The 6120XG Blade Switch supports FCoE (converged fabric) standards, as well as standard
Ethernet and iSCSI configurations.
The 6120G/XG Blade Switch is well suited for data centers in transition or with mixed network
requirements. The switch has 1 Gb downlinks to the servers and both 1 Gb and 10 Gb uplinks
that use a variety of connectors. The 6120G/XG Blade Switch is designed to enable you to get
the most out of your existing data center infrastructure.
Both switches come with a robust set of industry‑standard Layer 2 switching functions, QoS
metering, security, and high-availability features. These switches reduce the complexity of
network management through resilient core-to-edge connectivity and automated provisioning
technologies. With an included lifetime warranty, the 6120 Blade Switch series offer outstanding
investment protection, flexibility, and scalability, as well as ease of deployment and reduced
operational costs.
HP GbE2c Layer 2/3 Ethernet Blade Switch
HP GbE2c Layer 2/3 Ethernet Blade Switch is the lowest price fully featured blade switch in
the market today.1 The GbE2c Layer 2/3 Ethernet Blade Switch has 16 downlinks, five uplinks,
and two cross connects (up to four of the uplinks can be fiber connections), making it ideal for
any network configuration. In addition to a full set of advanced Layer 2 features, this switch
provides the added benefits of full Layer 3 routing along with QoS queuing and enhanced
IP-based switching and filtering. With Layer 3 routing, network traffic can be managed much
more efficiently and broadcast traffic between servers can remain within the enclosure. Security
features provide added protection for switch configuration data, while packet filtering helps
secure and segment sensitive traffic or network access.
Cisco Catalyst 3120 Blade Switch series
Cisco Catalyst 3120 Blade Switch series is designed specifically to meet the requirements of
blade server environments. Built on Cisco’s hardware and IOS software, the Catalyst 3120 Blade
Switch is engineered with technologies designed to meet the rigors of the blade server
infrastructure. Both switches are designed to deliver scalable, high-performance, highly
resilient connectivity, while supporting ongoing data center initiatives to reduce server
infrastructure complexity, management, and total cost of ownership.
Based on internal research and review of all other
blade switches sold by HP or competitors, HP,
August 2011.
1
The Catalyst 3120 Blade Switch uses a stacking technology that allows multiple switches to act
as a single entity. This switch stacking technology takes the individual physical switches within
a rack and treats them as one logical switch. This is the foundation of the Catalyst 3120 Blade
Switch’s ability to simplify operations and management. Additional functionality such as
Layer 3 routing is available through the IP Services upgrade option.
3
Cisco Catalyst 3020 Blade Switch
Cisco Catalyst 3020 Blade Switch HP c-Class BladeSystem was designed by Cisco for seamless
integration into the BladeSystem c-Class enclosure. This integration allows the switch to
leverage the improved efficiency, low cost, and greater flexibility of the c-Class blade enclosure
design. The Catalyst 3020 Blade Switch provides an integrated platform that delivers resiliency,
advanced security, and enhanced manageability to the server edge, while dramatically
reducing cables.
The Catalyst 3020 Blade Switch provides 16 internal downlinks and eight 1 Gb uplinks.
Up to four uplinks can be fiber connections when using optional Cisco SFP Fiber modules. In
addition, two uplinks can be directed as internal cross connects. To further capitalize on your
current Cisco network infrastructure, you can run CiscoWorks management solutions. By
utilizing the advanced Cisco end-to-end management framework, you can simplify current
and future deployments, reducing implementation, ownership, and management costs. The
Catalyst 3020 Blade Switch is an ideal choice for enterprise and data center environments.
Cisco Fabric Extender for HP BladeSystem
Cisco Fabric Extender for HP BladeSystem provides an extension of the Cisco Nexus switch
fabric to the HP server edge. Logically, it behaves like a remote line card to a parent Cisco
Nexus 5000 Series Switches with the Cisco Fabric Extender and the parent Nexus switch
together forming a distributed modular system. The Fabric Extender for HP BladeSystem
forwards traffic to the Cisco Nexus 5000 Series Switches over eight 10GbE uplinks.
Being an extension of a Nexus 5000 allows Ethernet, FCoE, or iSCSI traffic to be switched
according to policies established by the Nexus 5000 Series Switch with a single point
of management.
Mellanox SX1018HP Ethernet Switch
Mellanox SX1018HP Ethernet Switch is designed for applications that require ultra-low latency,
high server bandwidth or both, in a blade switch format. The Mellanox SX1018HP provides
sixteen 40 Gb downlinks to each server and up to eighteen 40 Gb links to the network for an
unparalleled 1.36 Tb of bandwidth throughput. Couple this with an industry leading 230ns
of latency, and you can see why the Mellanox SX1018HP is the perfect switch for Financial
Services, High Performance Computing and virtualized servers running intensive
applications. The switch also supports RDMA over Converged Ethernet and when used with
an appropriate adapter, can further speed applications by reducing server CPU utilization.
The SX1018HP provides a full suite of management options, including support for Mellanox’s
Unified Fabric Manager (UFM), SNMP v1, v2, v3, and web user interfaces. In addition, the
SX1018HP incorporates a familiar industry-standard CLI, which enables administrators to easily
configure the switch.
4
Technical specifications
HP 6125G Blade Switch
HP 6125G/XG Blade Switch
Blade type
Single bay
Single bay
Performance
26 Gb/s uplink port bandwidth; 16 Gb/s downlink (server) port
bandwidth; 10 Gb/s cross-link port bandwidth. Forwarding rate
1.5 million pps per Gigabit port, (64-byte packets), and
14.8 million pps per 10 Gb port
44 Gb/s uplink port bandwidth; 16 Gb/s downlink (server) port
bandwidth; 10 Gb/s cross-link bandwidth. Forwarding rate
1.5 million pps per Gigabit port, (64-byte packets), and
14.8 million pps per 10 Gb port
Port configuration
16 internal 1 Gb downlinks
4 external RJ45 (1 Gb)
4 external SFP/SFP+ (1 Gb/IRF @10 Gb)
1 internal 10 Gb cross-link
1 management console port
4 external RJ45 (1 Gb)
4 external SFP/SFP+ (1 Gb/10 Gb/IRF)
1 internal 10 Gb cross-link
Media types
Copper RJ45
SFP SX optical
Copper RJ45
SFP SX optical
SFP+ SR/LR/LRM optical
Management features Remote configuration and management through Web browser or CLI
HTTPS
SNMP v1, v2c, and v3
OOBM via Onboard Administrator
GUI Management via Intelligent Management Center
RJ45 console port
sFlow and RMON network monitoring
NTP
OAM (802.3ah)
CFD (802.1ag)
Remote configuration and management through Web browser or CLI
HTTPS
OOBM via Onboard Administrator
GUI Management via Intelligent Management Center
RJ45 console port
sFlow and RMON network monitoring
NTP
OAM (802.3ah)
CFD (802.1ag)
High-availability
features
IRF
LACP
Spanning Tree
ECMP
Device Link Detection Protocol (DLDP)
Rapid Ring Protection Protocol (RRPP)
Smart Link
Virtual Router Redundancy Protocol (VRRP)
IRF
LACP
Spanning Tree
ECMP
DLDP
RRPP
Smart Link
VRRP
Protocols supported
SSH v2, TACACS, TACACS+, RADIUS; IEEE 802.3, 802.3ab, 802.1d,
802.1s, 802.1w, 802.1p, 802.1x, 802.3ad (static), and 802.1Q,
IGMP snooping, and BOOTP
See QuickSpecs for complete list of supported protocols and MIBs
SSH v2, TACACS, TACACS+, RADIUS; IEEE 802.3, 802.3ab, 802.1d,
802.1s, 802.1w, 802.1p, 802.1x, 802.3ad (static), and 802.1Q,
IGMP snooping, and BOOTP
See QuickSpecs for complete list of supported protocols and MIBs
Maximum per c7000
enclosure
8
8
5
Technical specifications (continued)
HP 6125G Blade Switch
Options available
HP X125 1G SFP LC LH40 1310nm Transceiver JD061A
HP X125 1G SFP LC LH70 Transceiver JD063B
HP X120 1G SFP RJ45 T Transceiver JD089B
HP X120 1G SFP LC SX Transceiver JD118B
HP X120 1G SFP LC LX Transceiver JD119B
HP X125 1G SFP LC LH70 Transceiver JD063B
HP X120 1G SFP RJ45 T Transceiver JD089B
HP X120 1G SFP LC SX Transceiver JD118B
HP X120 1G SFP LC LX Transceiver JD119B
HP X130 SFP+ LC SR Transceiver JD092B
HP X130 SFP+ LC LRM Transceiver JD093B
HP X130 SFP+ LC LR Transceiver JD094B
HP X240 SFP+ SFP+ 0.65 m Direct Attach Cable JD095B
HP X240 SFP+ SFP+ 1.2 m Direct Attach Cable JD096B
HP X240 SFP+ SFP+ 3 m Direct Attach Cable JD097B
HP X240 SFP+ SFP+ 5 m Direct Attach Cable JG081B
Warranty
(parts/labor/onsite)
1-year parts/1-year labor/1-year onsite,
Online software updates
Online software updates
QuickSpecs URL
http://h18000.www1.hp.com/products/quickspecs/14427_
div/14427_div.html
div/14428_div.html
6
HP 6120XG Blade Switch
Blade type
Single bay
Single bay
Single bay
Performance
80 Gb/s external port bandwidth per
switch (160 Gb/s full duplex), 480 Gb
total throughput, 512 MB RAM, and
640 MB flash memory
36 Gb/s external port bandwidth per
switch (72 Gb/s full duplex), 104 Gb
total throughput, 512 MB RAM, and
256 MB flash memory
256 MB SDRAM 64 MB flash memory
Port configuration
8 external SFP+
10 Gb uplinks, including one dual‑personality
(CX4 or SFP+)
10 Gb uplink
2 selectable internal 10 Gb cross-links,
shared with 2 external 10 Gb uplinks
4 external 10/100/1000 Base-T uplinks
2 external 1GbE SFP ports
1 external 10 Gb CX4 uplink
2 external 10 Gb XFP ports
1 internal 10 Gb cross connect
4 external 10/100/1000/Base-T uplinks
2 internal cross connects
4 optional external 10/100/1000 SFP uplinks
2 external 10 Gb X2 uplinks (3120X only)
Media types
SFP SX optical/RJ45
SFP+ SR/LR/LRM optical
DAC copper cables CX4 copper
RJ-45 copper
SFP LX/SX optical
XFP SR/LR optical
CX4 copper
Copper RJ-45
Fiber SFP—SR/LR
X2—SR, LRM, LX4, CX4 (3120X only)
Management
features
CLI
DCM One
IPv6 Host
SNMP v1, v2, and v3
HTTP, HTTPS
NTP sever support
RMON
CLI
DCM One
IPv6 Host
SNMP v1, v2, and v3
HTTP, HTTPS
NTP sever support
RMON
CLI CiscoWorks
Telnet
High-availability
features
Link aggregation protocol, unidirectional link Link aggregation protocol, unidirectional link Per VLAN Spanning Tree Plus
detection IEEE 802.1s Multiple Spanning Tree detection IEEE 802.1s Multiple Spanning Tree Uplink Fast
Port Fast
Bridge Protocol Data Unit
Protocols supported SSH v2, TACACS, TACACS+, RADIUS; IEEE
802.3, 802.3ab, 802.1d, 802.1s, 802.1w,
802.1p, 802.1x, 802.3ad (static), and 802.1Q,
IGMP snooping, and BOOTP; 802.1Qaz—Data
Center Bridging Capability Exchange Protocol
(DCBX); 802.1Qbb Priority-based Flow
Control; 802.1Qaz—Enhanced Transmission
Selection; CEE support on trunked ports
SSH v2, TACACS, TACACS+, RADIUS; IEEE
802.3, 802.3ab, 802.1d, 802.1s, 802.1w,
802.1p, 802.1x, 802.3ad (static), and
802.1Q, IGMP snooping, and BOOTP
See QuickSpecs for complete list of
supported MIBs
SSH v2, 802.1s, 802.1w, 802.1x, 802.3ad,
802.3x, 802.1D, 802.1p, 802.1Q, 802.3,
802.3u, 802.3ab, 802.3z
supported MIBs
supported MIBs
Maximum per c7000
enclosure
8
8
8
7
HP 6120XG Blade Switch
HP BladeSystem c-Class Small Form-Factor
Pluggable 1m 10GbE Copper Cable
(487655-B21)
(487658-B21)
(455883-B21)
HP BladeSystem c-Class 10Gb Short Range
Small Form-Factor Pluggable+
(455886-B21)
HP BladeSystem c-Class 10Gb Long Range
Small Form-Factor Pluggable+
(455889-B21)
HP BladeSystem c-Class 10Gb Long Range
Mode Small Form-Factor Pluggable+
(453151-B21)
HP BladeSystem 1Gb SX SFP
Opt Kit 453154-B21
HP BladeSystem 1Gb RJ-45
SFP Opt Kit 221692-B21
HP 6120XG CEE License (608074-B21)
HP 10GbE XFP-SFP+ 1m Direct Attach Cable
J9300B
J9301B
J9302B
HP SR XFP Option Kit
443756 B21
HP LR XFP Option Kit
443757 B21
HP BladeSystem 1Gb RJ-45
HP BladeSystem 1Gb SX
IP Services Software upgrade license for
Cisco 3120
Series—455046-B21
1000Base SX Fiber SFP
Module—378929-B21
10 Gb CX4 X2 Module—59005-B21 (3120X)
10 Gb SR X2 Module—59006-B21 (3120X)
10 Gb LRM X2 Module—59007-B21 (3120X)
Warranty
Lifetime hardware replacement/1-year
(parts/labor/onsite) labor/1-year onsite
Lifetime hardware replacement/1-year
labor/1-year onsite
3-year software updates
QuickSpecs URL
http://h18000.www1.hp.com/products/
quickspecs/13423_div/13423_div.pdf
Options available
8
Cisco Catalyst 3020 Blade Switch for HP
Cisco Fabric Extender for HP BladeSystem
Blade type
Single bay
Single bay
Performance
48 Gb switching fabric 128 MB DDR SDRAM
32 MB flash memory
N/A
Port configuration
8 external 10/100/1000
SFP/Base-T uplinks (2 configurable as cross connects)
Management console port
Internal interface to c-Class Onboard Administrator module
16 internal 1 Gb/10 Gb downlinks
8 external SFP+ 10 Gb uplinks
Media types
Copper RJ-45
Fiber SX/LX SFP (maximum of 4)
SFP+ SR/LR/optical DAC copper cables Cisco Fabric Extender
Transceivers
Management features
CLI CiscoWorks
Telnet
Fabric extender management using in-band management;
Cisco DCNM and standard SNMP, XML interfaces, and CLI
High-availability features
Per VLAN Spanning Tree Plus; Uplink Fast; Port Fast; Bridge
Protocol Data Unit
Uplink traffic management through Cisco EtherChannel
hashing or static port pinning
Protocols supported
SSH v2, 802.1s, 802.1w, 802.1x, 802.3ad, 802.3x, 802.1D,
802.1p, 802.1Q, 802.3, 802.3u, 802.3ab, 802.3z
IEEE 802.1p: CoS prioritization; 802.1Q; 802.3; 802.3ae;
802.3ap; SFF 8431 SFP+ support; RMON; SFF 8461
Maximum per c7000
enclosure
8
8
Options available
1000Base SX Fiber SFP Module
(part # 378929-B21)
HP C-Series 10Gb Ethernet Short Range
SFP+ Transceiver AP783A
HP 3m C-series Passive Copper SFP+ Cable AP784A
HP 5m C-series Passive Copper SFP+ Cable AP785A
HP 7m C-series Active Copper SFP+ Cable QK701A
HP 10m C-series Active Copper SFP+ Cable QK702A
HP BladeSystem c-Class Small Form‑Factor Pluggable .5m
10GbE Copper Cable
487649-B21
HP BladeSystem c-Class Small Form‑Factor Pluggable 1m
10GbE Copper Cable
487652-B21
10GbE Copper Cable
487655-B21
10GbE Copper Cable 537963-B21
Warranty
1-year parts/1-year labor/1-year onsite, 3-year software
updates
1-year parts/1-year labor/1-year onsite
QuickSpecs URL
div/12515_div.pdf
div/14138_div.html
9
HP GbE2c Layer 2/3 Ethernet Blade Switch
Mellanox SX1018HP Ethernet Switch
Blade type
Single bay
Double bay
Performance
48 Gb switching fabric 128 MB DDR SDRAM
16 MB flash memory
230ns latency at 40 Gb; 250ns latency at 10 Gb, 640 Gb/s
downlink (server) port bandwidth 2 GB DDR main, 32 MB
flash memory
Port configuration
5 external 10/100/1000 SFP/Base-T uplinks
2 internal cross connects
1 management console port Internal interface to c-Class
Onboard Administrator module
16 internal 10 Gb/40 Gb downlinks
18 external 40 Gb QSFP+ uplinks (can be expanded to 4 x 10 Gb
with optional breakout cable)
Internal interface to c-Class Onboard Administrator module
Media types
Copper RJ-45
Fiber SX/LX SFP (maximum of 4)
QSFP+ modules and cables
Management features
CLI
iSCLI
SNMP v1, v2, and v3
HTTP, HTTPS
NTP server support
RMON
UFM (Unified Fabric Manager)
SNMP v1, v2c, and v3, Telnet, CLI
High-availability features
Link aggregation protocol; Uplink failure detection;
Spanning Tree
Link aggregation protocol; Unidirectional link detection; Rapid
Reconfiguration of Spanning Tree
Protocols supported
SSH v2, TACACS, TACACS+, RADIUS, 802.3, 802.3u, 802.3ab,
802.1d, 802.1p, 802.3ac, 802.3ad (Static), and 802.1Q, 802.3x,
802.1x, 802.1Q, IGMP v1, IGMP v2 BOOTP, QoS (RFC 2474 and
RFC 2475)
802.1D MAC Bridges, 802.1p Priority, 802.1Q VLANs, 802.3ad
Link Aggregation Control Protocol (LACP), 802.3ae 10-Gigabit
Ethernet, 802.3x Flow Control, 802.1w Rapid Reconfiguration of
Spanning Tree
Maximum per c7000
enclosure
8
2
Options available
1000Base SX Fiber SFP Module kit
(part # 440627-B21) (maximum of 2 kits
per switch) Advanced Functionality Software Option
(part # 485192-B21)
HP QSFP/SFP+ Adaptor (655874-B21)
HP 0.5M IB FDR QSFP Copper Cable (670759-B21)
HP 1M IB FDR QSFP Copper Cable (670759-B22)
HP 3M IB FDR QSFP Copper Cable (670759-B25)
HP 3M IB FDR QSFP Optical Cable (670760-B21)
Warranty
QuickSpecs URL
div/12670_div.pdf
div/14481_div.html
10
HP Factory Express
HP Factory Express provides customization and deployment services along with your storage
and server purchases. You can customize hardware to your exact specifications in the factory—
helping speed deployment. Visit hp.com/go/factoryexpress.
Customer technical training
We offer a variety of training courses on storage software, networking, archiving, and disk
storage systems. Our classes are available in many delivery modalities—from traditional
instructor-led courses at one of our 80 training centers worldwide to online and onsite training.
Visit hp.com/learn/storage.
HP Financial Services
HP Financial Services provides innovative financing and financial asset management programs
to help you acquire, manage, and ultimately retire your HP solutions. Visit hp.com/go/
hpfinancialservices.
HP Services
When technology works, business works
The challenge of virtually every IT organization is similar: To develop and maintain an agile,
virtualized efficient server and network infrastructure that delivers the service levels of your
business needs.
HP Technology Services offer a comprehensive portfolio of HP Care Pack Services to help
design, deploy, manage, and support your blades based on virtualized environment.
Minimum recommended HP Care Pack offerings
•3-year, 4-hour response onsite; 24x7 hardware support
•Blades infrastructure plus enhanced network installation and start up services
Enhanced service level HP Care Pack offerings
•3-Year Support Plus 24: Integrated 24x7 hardware and software support
•Proactive Select: Access to HP proven technical consultants. Purchase service credits and
obtain expertise when needed
Benefit from HP Care Pack Services
•Deliver speedy deployment for faster return on investment
•Increase uptime and performance of servers
•Detect and diagnose problems automatically, quick repairs help save time, money,
and resources
For more information, visit hp.com/services/bladesystem.
Learn more
Discover how HP BladeSystem Ethernet family offers a single solution to meet
your various networking needs, visit hp.com/go/bladesystem/interconnects.
11
Sign up for updates
hp.com/go/getupdated
Rate this document
© Copyright 2006–2007, 2009, 2011–2013 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change
without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and
services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions
contained herein.
4AA0-7101ENW, February 2013

HP BladeSystem Ethernet interconnects family - Inmac

Transcription

Documents pareils

mcr205-1t/1s - datasheet - hq

Datasheet english

Cisco OneX Converter Module

BT-UP 470

GE-DSH-82/ GE-DSH-73 Series Hardened Managed

SunLite GigE

GUILLOTINE DAMPER RG 350

5-Port Fast Ethernet Switch

BC820MP5 5 Megapixel box camera | Indoor