declaration of performance
Transcription
declaration of performance
DECLARATION DE PERFORMANCE - DECLARACIÓN DE PRESTACIONES DECLARATION OF PERFORMANCE DoP nº 5.381.02.01 DARBO 1089 Route de la Lande 40260 LINXE - France Appellation Commerciale Tipo de producto y nombre comercial Product Type Panneau de particules P2 Mélamine Innovus Tablero aglomerado de partículas P2 recubierto con melamina Melamine Particles board P2 Innovus BATB3 Usage prévu Uso previsto Intended use EVCP* AVCP** Composant non structurel pour application intérieure (mobilier inclus) en milieu sec Componentes no estructurales para mobiliarios de interior (incluyendo mobiliario) en condiciones secas Non structural components for interior fitments (including furniture) in dry conditions Référence à l’organisme notifié Referencia del Organismo Notificador Notified Body reference Non Applicable 4 No aplicable Not applicable * Système d'Evaluation et Vérification de la Constance des Performances selon l'annexe V du Règlement (UE) N° 305/2011 *Sistema de evaluación y verificación de la constancia de las prestaciones, según Anexo V de la regulación (UE) N° 305/2011 ** Assessment and Verification of Constancy of Performance system according to Annex V of Regulation (EU) N° 305/2011 Performances déclarées / Prestaciones declaradas / Declared performance Caractéristiques essentielles Principales características Essential characteristics Unité Unidad Unit Performances Prestaciones Performance Spécification technique harmonisée Norma técnica armonizada Harmonised technical specification Gamme d’épaisseur considérée Gama de espesores considerada Thickness range considered Epaisseur - Espesor - Thickness Résistance à la flexion Resistencia a la flexión Bending Strength Module d’élasticité en flexion Módulo de elasticidad en flexión Modulus of Elasticityin bending Cohésion interne Resistencia a la tracción interna Internal bond Arrachement de surface Resistencia al arranque de superficie Surface soundness > 4 - 6 > 6 - 13 > 13 - > 20 - > 25 - > 32 20 25 32 40 > 40 mm 8.5 N/mm 2 1500 1350 1200 N/mm 2 0.35 0.30 0.25 0.20 N/mm 2 0,8 0,8 0,8 0,8 N/mm 2 11 11 1800 1600 0,40 0,8 10.5 9.5 EN 13986 : 2004 1 Caractéristiques essentielles Principales características Essential characteristics Unité Unidad Unit Performances Prestaciones Performance Spécification technique harmonisée Norma técnica armonizada Harmonised technical specification Gamme d’épaisseur considérée Gama de espesores considerada Thickness range considered Epaisseur - Espesor - Thickness Dégagement de formaldéhyde Emisión de formaldehído Release of formaldehyde Réaction au feu Reacción al fuego Reaction to fire Perméabilité à la vapeur d’eau (µ) Permeabilidad al vapor de agua Water vapour permeability Isolation aux bruits (masse surfacique) Aislamiento del ruido aéreo Airborne sound insulation (surface mass) Absorption acoustique (α) Absorción acústica -Sound absorption Conductivité thermique (λ) Conductividad térmica Thermal conductivity Durabilité biologique Durabilidad biológica (Clase de uso) Biological durability (Use Class) Contenance en PCP Contenido en pentaclorofenol Content of pentachlorophenol Gamme d’épaisseur considérée Gama de espesores considerada Thickness range considered > 4 - 6 > 6 - 13 E1 > 13 - > 20 - > 25 - > 32 20 25 32 40 E1 D-s2, d0 D-s2, d0 E1 E1 > 40 mm E1 - D-s2, D-s2, D-s2, d0 d0 d0 - NPD NPD NPD NPD NPD - NPD NPD NPD NPD NPD - NPD NPD NPD NPD NPD - NPD NPD NPD NPD NPD W/(m-K) NPD NPD NPD NPD NPD - NPD NPD NPD NPD NPD - <5 <5 <5 <5 <5 EN 13986 : 2004 Ppm Notes: NPD = Pas de performance déclarée /Prestación no declarada / No Performance Declared La performance du produit identifié est conforme à la performance déclarée. Cette déclaration de performance est établie sous la seule responsabilité du fabricant identifié ci-dessus. Las prestaciones del producto identificado son conformes con las prestaciones declaradas. La presente declaración de prestaciones se emite bajo la única responsabilidad del fabricante indicado en la parte superior. The performance of the product identified is in conformity with the declared performance. This declaration of performance is issued under the sole responsibility of the manufacturer identified above. Signé par et au nom du fabricant par / Firmado por y en nombre del fabricante Signed for and on behalf of the manufacturer by : Directeur - Director – Plant Manager M. PRIETO Sebastian Nom et fonction / Nombre y función / name and function Lieu et date / Lugar y fecha de emisión / Place and date of issue (firma/signature) Linxe, le 01/07/2013 2